Fedora :: Gnome3 Crashes Immediately - Some Repos Disappeared / Don't Work
Jun 27, 2011
Two days ago I finally upgraded from Fedora14 (x64) to Fedora15 (x64). [A bit of backstory: I first tried the preupgrade method, I always try it but for some reason it always fails (gives me errors about dependencies that it cannot solve), so as usual I downloaded the full DVD and upgraded using it. It usually works but, as usual, the first time I boot I have to boot in runlevel 3 because after the update my Nvidia drivers aren't up to date with the kernel, so using runlevel 3 I was able to yum update both Kernel and Kmod-nvidia packages; after that I could finally reboot and enjoy the new Gnome3 interface]
When I was finally able to boot in graphical mode (see above), everything worked fine: I had my Gnome3 desktop in front of me, programs worked, all my settings from Fedora14 were still there, all installed programs were still working etc etc. Of course, PackageKit listed a bunch of updates that I needed to do (more than 700 actually), so obviously I gave it the thumbs up to update; unfortunately, some dependencies could not be resolved, to be precise they are dependencies for the packages Mono, RPM and VLC (more details later).......
View 14 Replies
ADVERTISEMENT
Jun 20, 2011
I have a Fujitsu Amilo Pi 3525 notebook with 4 GB RAM and I am trying out Fedora 15 64-bit. When I boot from the CD, it reboots at the point where plymouth should exit and X should start. There are no obvious error messages from the console; it just reboots. Here is the hardware spec. for this laptop: [URL]
This notebook has been generally reliable and runs 64-bit Ubuntu without any problems. I am planning to test the CD in another host (although the media check did not fail) and at least try the 32-bit version (even though I know it can't address of the RAM). As experiences with Linux go, it feels a little early to hit a brick wall so early in the process.
View 3 Replies
View Related
Mar 15, 2010
When I attempt to install the OS on my PC, the install software crashes immediately after I select US-English on the first screen. I'm copying the entire error report below. My system is configured as follows: Gigabyte P35-DS3R motherboard with 4G RAM. (FYI, I'm using the 32-bit LiveCD just because I may need a 32-bit OS for some purposes. I know this means I may not be able to use all of my RAM.) There are 3 500G hard drives connected to the computer. /dev/sda and /dev/sdb are RAID-1 mirrors via the on-motherboard ICH9R RAID chip. The logical partitions show up as /dev/dm-1, /dev/dm-2, /dev/dm-3, /dev/dm-4, and /dev/dm-5. When I type `fdisk -l`, I can see sda, sdb, and dm-* all separately. (I can provide the full output of `fdisk` if anybody wants to see it.)
/dev/sdc is a standalone drive without RAID.
I want to install Fedora on /dev/dm-2 with swap on /dev/dm-5. Currently, /dev/dm-1 and /dev/sdc2 each contain a separate installation of WinXP. I suspect the problem is with detecting RAID, thus I have deleted most of the error report that doesn't seem to concern storage detection.
[code]....
View 4 Replies
View Related
Jan 10, 2010
Whenever I access F-Spot, it appears and the, almost immediately, disappears.
View 5 Replies
View Related
Jan 8, 2011
I have Suse 11.3 KDE and every time I opened an mp3 file, Amarok opened and closed immediately reporting a new bug everytime. So I followed this thread Amarok Not Launching I have uninstalled Amarok through Install/ Remove software. But I am not able to find this folder to delete, as mentioned in above post: Delete the directory ~/.kde/share/apps/amarok
View 9 Replies
View Related
Apr 24, 2011
When I am trying to start Tuxmath, it only show the initial screen for a second or two, and shuts down. From the console I get this error message:
[code]...
View 2 Replies
View Related
Oct 11, 2010
On a fresh install of the Meerkat release candidate, I've installed the latest VirtualBox (3.2.8-64453, not open source version). When I run it, I get a user-agreement notice box as expected.
But, (1) sometimes immediately thereafter, or if not, then (2) as soon as I move the mouse pointer or (3) after I use the PageDown key to get to the bottom of the agreement text and use a key combination for "I agree," my Ubuntu user session crashes and I have to log in again.
The only other weird symptom I'm having is that I cannot set visual effects to anything but "None" (if I attempt to, I get an alert "The Composite extension is not available").
Perhaps there's a video-related problem underlying both issues, i.e., the X server is failing in both cases?
View 9 Replies
View Related
May 25, 2011
I noticed that the transparency profiles don't work on non-maximized terminal windows in Gnome3
Anybody else having this problem? Notice if you maximize the window your transparency suddenly works...
I'm assuming this is a mutter shadow problem?
View 1 Replies
View Related
Apr 27, 2010
Everytime I add the repo for adobe flash player YUM freezes, it does the same with RPM fusion repos as well.
I added adobe repo from their website and installed the repo via KPackagekit.
It even installed flash plugin, but now after reboot evrytime I do yum check-update it just freezes indefinately(altough it does show that loaded presto plugin message)
And if i rename adobe repo filename(from /etc/rum.repos.d) to something else YUM works perfectly fine!
View 10 Replies
View Related
Aug 21, 2011
When I try to enable any options in the Debian software, Software Sources immediately crashes. I'd like to enable official supported software downloadable from the internet.
View 3 Replies
View Related
Mar 18, 2010
I'm Dual-booting XP with Ubuntu Karmic Koala, heres my other specs:
CPU: Intel Pentium D 3.0Ghz family(15) model(4) stepping(4)
GFX: Geforce 7800 GT (had problems with GFX when I first installed Ubuntu, I had to update my drivers)
2 GB RAM
This is a nearly fresh install of Karmic Koala, I've only installed whatever updates I needed, graphics card drivers, KPlayer, and Google Chrome. Because I prefer Chrome over Firefox I immediately went to download Chrome, and Firefox would get to the Chrome page and then crash. I then got the Chrome install file from another computer and installed it. Chrome will not even launch, so I go to search the problem in Firefox and it crashes on ANY link I click in Google Search. I also tried to directly type websites into the URL box: it loads the pages title (Ex. "Yahoo! Mail"), and crashes before displaying the page at all.
This is a very odd problem to me as I used the same disc to install dual-boot with Win7 and Ubuntu on my laptop which works perfectly, and now this happens to my desktop.
View 6 Replies
View Related
Aug 12, 2010
i installed F13 at work in VirtualBox to test Fedora features in order to have a web server under Linux. while playing aroung i run the yum command : yum info kernel and i got the following message:
Quote:
Loaded plugins: presto, refresh-packagekit
Error: Cannot retrieve repository metadata (repomd.xml) for repository: fedora. Please verify its path and try again
i've search on internet and after googling a lot, i tried several solution like:
- uncomment all baseurl and commenting mirrorlist
- disable networkManager
- add http_proxy in yum.conf
however, nothing works internet works well the proof is that i'm writting this thread thanks to F13 :-)
View 3 Replies
View Related
Jul 30, 2011
After it was updated a few days ago, VLC stopped working. It just quits immediately without doing anything, no matter what command line options you give it.
For example:
Code:
View 5 Replies
View Related
May 5, 2011
I am trying to solve multiple issues with my 64x natty install using gnome3 ppa( official ppa from gnome3). I have this setup on two machines, one is a fresh install the other is a upgrade. They both have most of these issues. Here they are: 1) Nautilus will not launch from the favorites bar. It does launch from a shortcut on the desktop. It will not run from the terminal unless I am root. 2) Number lock is disabled at startup (enabled in my bios). I used to be able to enable after nattty had started, I no longer can, though num lock light is lit - number keypad does not work!
3) I have set gnome3 set to let nautilus draw the background and desktop, I get a white screen at boot until Nautilus is launched then I get a background and some desktop icons(no computer or network icons). If I plug in a usb drive the icon appears on my desktop, when I select it I loose the background and have to select it again.
4) Wireless randomly will drop the connection, have to reconnect, sometimes it will, sometimes I have to reboot. I have Fedora installed on a 2nd hard drive on the machine with a clean install and the only similarity is it displays the default desktop until I launch Nautilus, then my background and desktop are displayed with all of the icons. From there on out Fedora has none of these issues. I have used Ubuntu Gnome and XFCE as my only os since 6.0 and have never had this many problems. Both machines would not run the gdm because of Nvidia issues after the upgrade and clean install. I DO NOT want to give up on Ubuntu as I tell all my friends and family to use it.
View 2 Replies
View Related
Mar 12, 2011
Some of my programs don't start or don't work! For example, when I click on MultiGet, don't starts or when I want open a file with blebder, it does crash and when I want to save a file, it does crash! I use f14 and my laptop is inspiron-dell 1564 with intel VGA and the lastest updates are installed on my laptop.
View 3 Replies
View Related
May 29, 2011
iomega prestige 1TB fails to mount on Fedora 15 32 bits. that machine has a USB2 port. /var/log/messages reports this in a loop:
[Code].....
on my Fedora 15 64 bit laptop, it crashes the whole box. (I'll post later the /var/log/messages extract). That machine has a usb 3 port. I'm most interested in making it work under Fedora 15 32 bit, but the crash under 64 bit may give other insight
View 9 Replies
View Related
Jan 22, 2010
is it possible to update repository via yum command like yum install/upgrade repositries
View 2 Replies
View Related
Jan 20, 2011
I am using Red Hat EL 4. I am facing a bizzare issue. Just like that I rebooted my PC. When it booted up, I am not able to see my icons in desktop and also right click does not work.
View 7 Replies
View Related
Aug 4, 2011
I'm writing a udev rule to disable the trackpad when a mouse is plugged in, and I'm having a bit of trouble re-enabling the trackpad when the mouse is disconnected.Here's the script that the udev rule calls (with the appropriate argument of course).
Code:
#!/bin/bash
. /home/holden/.bash_env/backup
[code].....
View 2 Replies
View Related
Apr 7, 2011
How can our F14 users use Gnome3?
View 12 Replies
View Related
May 29, 2011
Click on the user menu, "My Account" , click on unlock and then click on your name to change it to whatever you want.
View 1 Replies
View Related
Jun 17, 2011
This may seem like an oddball question, but I ask because I don't know. When working with Fedora 15, which parts of what I see on screen are actually Fedora, and which parts of Gnome 3? I'm trying to understand where the separation lies between the OS and the shell, and I'm not quite clear when I'm "doing things" if I'm using a feature of Fedora, or Gnome 3. I know when I'm in a terminal window, that's the shell/Gnome3. But what else that I do is actually the shell, and not Fedora?
View 3 Replies
View Related
Jun 24, 2011
F15 running on my Dell Latitude 505 laptop. During installation (last week) I got "Gnome3 not fully supported - using fallback mode". I found out later that my Intel 855 video doesn't support 3D, which Gnome3 requires.
System seems to run fine and boots into fallback video. But I'd sure like to have access to my "desktop" so I can drag and drop folders, etc. there. Currently I now have to open the Desktop folder, and then drag and drop, etc. And without an "active" desktop screen, added devices (external drives, cameras, etc.) don't show up unless I open the Desktop folder. Is there an alternative to Gnome3 I can install? I assume without the need for 3D which my Intel video 855 doesn't support.
If there's an alternative or two, could someone point me to exactly how to install them? If there's a more appropriate forum here for this request,
View 14 Replies
View Related
Jul 31, 2011
has anyone tried to use Mikogo under Fedora 15 with Gnome 3, i have tried with the instructions on the site but nothing happens, it might be because the app is not gnome 3 ready or something I am missing.[URL].. the way it is supposed to work, you just download it and run it like blender.. and it should start a task bar app (the reason why i think it does nothing) and then you can use it..
View 6 Replies
View Related
May 28, 2011
After upgrading to F15 I noticed that Alt+Tab behaves now differently. For example, if I have several terminal windows open, I can't cycle through all of them by just pressing Alt+Tab repeatedly. Now the system just displays one terminal icon and icons for each terminal window, but if I keep pressing Tab (Alt being down all the time), it does not switch the window.
I want back the old behavior of the Alt+Tab keys!
View 12 Replies
View Related
May 29, 2011
ALT+F2 R to restart the Shell, your extensions will be enabled
View 6 Replies
View Related
Jun 3, 2011
How do I change the Computer Name (ras) in Lovelock?
View 13 Replies
View Related
Jun 28, 2011
I'm going to remove Gnome3 from FC15 and, possibly, install KDE. I'm not sure about the options I have for it:I saw I can remove just the gnome-shell package. This makes me wonder if it is possible to replace the gnome-shell functionality with a gnome-2 equivalent, getting some of the gnome2 back how much of gnome-related packages can I remove? For example, is it advisable to remove gdm in favour of kdm? Are there gtk/gnome programs that are "better" than kde equivalents and are thus best left untouched, along with their dependencies? finally, somewhat unrelated, do you know good tutorials for gnome2.X expatriates to learn modern kde?
View 14 Replies
View Related
Jul 18, 2011
is there any rainmeter like software for f15 gnome3?in short: i want live rss feeds right on desktop. is there a way?rainmeter is a lightweight software in windows in which widgets like rss feed, gmail inbox, fb notifications, system info, hdd partitions, music player, weather, app launcher etc can be customized on custom sidebar panels/bars.
View 5 Replies
View Related
Jul 20, 2011
Whats the app to edit the menus in Gnome3, I've tried alacarte, but it has no effect
View 1 Replies
View Related
