Fedora :: GIMP - How To Print The Grid On An Image?
Jan 12, 2010How can I print an image from GIMP and have the grid that Gimp generates print-out on the image?
View 4 Replies
ADVERTISEMENT
Software :: GIMP Script-fu To Print An Image?
Dec 6, 2010I'm not a Script-fu expert but I did manage to get a Script-fu script to at least not throw up any errors. However, it also doesn't work. I've written a bash script to use gphoto2 and imagemagick to snap a picture, download, rotate and crop it ready for print. I'd like to automate the final step and have The GIMP or some other program print it.
My script-fu script is:
(define (printshot filename)
(let* ((image (car(gimp-file-load RUN-NONINTERACTIVE filename filename)))
(gimp-print-gtk RUN-NONINTERACTIVE image)
(gimp-image-delete image)))
)
and my bash script to call it is: gimp -i -b '(printshot $1)' -b '(gimp-quit)' I know it's executing the script-fu script because I have received error messages when I do something invalid in it. However, I don't get any output. I get the same thing when I run it from the Script-fu console. It seems to execute but doesn't print anything.
Fedora :: Print Multi Page Document From GIMP ?
Jan 24, 2010Opened with Gimp multi - page document. It opens fine and gives the layers! When I do : File, Print to File, pdf it gives out only one page! How to get all pages out?
Also when gimp loads all pages they are in layer! Is there a way how to see everypage without swiching written text off to see the next page. Because for mee its
Now if Im here and want to see again stage in y, I need to swich off all layers from y to z? It's normal or is there a way how to see all that in different way?
Fedora :: How To Print Labels Directly On DVDs / CDs Using GIMP
May 30, 2010Prerequisites :
The GIMP.
Make sure you have the "Gutenprint Printer Drivers Package" and "GIMP plugin for gutenprint" installed (add/remove software, search for gutenprint). A printer that uses a tray loading mechanism for printing disc media.
Procedure :
Open/create the image with the GIMP. I find that an image size of 1394 x 1394 is ideal for normal size discs. To create a working area in the image, first create a white circle. To do this, use the circle selection tool and position the cursor at position 0,0 (top left). Then, while holding the shift key down, hold left click and drag the cursor to the bottom right position, which should be 1394,1394. Fill the selection with white colour. Depending on the hub size of your disc you need to also cut out an area in the centre of the white circle approximately 22 mm in diameter. Position the circle selection cursor 11mm above the centre of the image, and 11mm to the left of the centre of the image. Then hold Shift down, hold left click and drag the cursor until the selected area is 22mm x 22mm. Then cut the selection. Now create a new layer above the white circle and create your image, keeping inside the white circle and outside the centre "hole".
If you are using non full face discs, make the centre "hole" bigger accordingly. Create 2 new background layers, one black and one white. The black is so you can preview the image with the correct shape, and the white one is for use when exporting the final finished image for printing. Remember to make the white layer above the black layer, or make the black layer invisible when exporting the image. I have attached a template for your immediate use. Once your image is finished, you should have a white square image, with your graphics arranged within a circle. White is not printed, so you don't need transparency around the edges. Don't put graphics too close to the edges of the circle or you will get ink on the plastic which never dries. (at least not until you have smeared it on your fabulous artwork ! ) Save the file as the default GIMP xcf format to preserve the layers then export it to png.
To print the image onto the disc. With the image open in the GIMP, In File > Page Setup set the paper size to CD - 5 inch and apply. Then go to File > Print with Gutenprint. Use the option to set up printer and find your make and model. Once you have the correct printer selected, lots of extra options become available.
My Printer settings are:
Print Quality - Best
Media Type - Photo paper
Media Source - Print to CD
CD hub size - Normal
Ink Set - Epson Standard inks
Resolution - 720 dpi
Ink Type - 6 color photo
Page Size - CD - 5 inch
(All the other settings are left as default)
On the Output tab there are more options for adjusting the print quality. Just click "Adjust Output". If you have adjusted the output, close that window then click "Print and Save Settings", otherwise just click "Print and Save Settings". It should fire up straight away. These settings are based on my Epson R200, so you may have to tweak them for your printer model.
Fedora :: Printing Large Image Over Multiple Pages In GIMP
Dec 8, 2009I have a large image that I want to print over 4 pages, each page showing 1/4 of the overall image, that I will past together. I'm doing this from GIMP on an up-to-date fc12 system. Searching around I find that there is a "scale" field in the print dialog and the lp command that cups supports and according to the documentation if I set scale to "200%" it should do what I want.However, when I set scale to 200% I get only one page with the upper left 1/4 of the page and then nothing. How do I get it to print the remaining 3 pages?
View 1 Replies View RelatedUbuntu :: Print Out From GIMP In A3?
Mar 12, 2010I have scanned architectural A3 drawings in to my pc from my Brother MFC A3 printer/scanner, altered the drawings by adding notes, dimensions, etc using GIMP but cannot print back out in A3. It prints out in A4 on a A3 page. Must be a coomon problem but can't find a solution
View 5 Replies View RelatedUbuntu :: Gimp Print - Only Getting Blank Documents?
Sep 24, 2010Gimp is failing to print documents correctly. It will spit out a page, whether it be PDF or an actual piece of paper, but the result is just a blank white document. I've tried printing through my HP printer, Cups PDF printer, and the default Print to File. I'm able to print documents through other applications on my system just fine.
I've done a fresh install of Ubuntu, but I'm still having the problem. I'm not sure if there are certain packages I need for Gimp to print. There are so many different PDF, PostScript, GhostScript, Cups, Foomatic, HP, etc. files in Synaptic that it's hard to tell what is important and what isn't. I'm using GIMP 2.7.2 on Ubuntu 10.10.
Debian :: Print An OpenOffice Or LibreOffice Calc With An Image And Text, The Image Is Not Printed (the Space Is Blank)
May 11, 2011I have a Canon iR3570/iR4570 PXL, and installed the driver CQue 1.0 TCP/IP Queue from Canon webpage.
The problem:
- if i try to print an OpenOffice or LibreOffice Calc with an image and text, the image is not printed (the space is blank).
- if i try to print an OpenOffice or LibreOffice Calc with just an image, it's printed great.
- if i try to print an OpenOffice or LibreOffice Impress, the images are not printed but the text is printed great.
[Code]..
Ubuntu :: Gimp Use Labers To Make Business Card And Print It The Printing?
Apr 1, 2010gimp problems : when i use labers to make business card and print it , the printing i get is really small .
View 1 Replies View RelatedGeneral :: How To Rotate Image On GIMP?
May 8, 2011Could someone tell me how to rotate an image on GIMP? Now You can rotate it 90 180 etc but I would like to rotate the image to level the shot.
View 6 Replies View RelatedSoftware :: Rotating An Image In GIMP
Aug 1, 2011In GIMP, can I rotate an image by only a few degrees? It's a scanned image of a crooked xerox copy, and I want to straighten it. I see options only for rotating by 90 or 180 degrees.
View 6 Replies View RelatedSoftware :: Composite Image Creation With GIMP
Dec 2, 2010I have four smaller jpg files, that I would like to merge into one file. Each image is similar in size, and they are color images. The only way I could get close is by creating multi-layered composites, which got really big. The only other way I could think of doing it is with OO, creating a presentation slide, and then rendering that slide.
View 2 Replies View RelatedSoftware :: Align Text In An Image In GIMP?
Mar 25, 2010I'm trying to make buttons for a webpage - each button has a "graphic" part - say an oval with a drop shadow, and text on top of that, such as "About Us", "Contact Us" etc. I'd like the text to line up horizontally against one another, so that if the buttons are placed next to one another in a straight line across the page, the texts line up with one another. How do I do this in GIMP?Common sense suggests that the "Align" tool should be what I should be using, but how do I use it?
View 1 Replies View RelatedProgramming :: Gimp Commands To Edit Small Image?
Jul 20, 2010I have a few small still images of around 300 bytes each that I created under Windows many years ago, I'd like to:
1) change the colour of some pixels on each and
2) make them the exact same size but I do not want to learn Gimp to do this since I have no other use for it.
Could someone show me the sequences of commands in Gimp GUI that will do the job?
Ubuntu Multimedia :: GIMP Scale Image Without Anti-aliasing?
Jul 17, 2010I want to make an 8-bit looking image that has very large pixels. My solution was to make a 50x50 image, zoom in, draw it with the 1x1 pixel pencil tool, and then scale it to whatever size i want.Everything went well except, when i try to scale it the anti-aliasing kicks in and blurs everything. Is there a way that i can disable anti-aliasing?
View 2 Replies View RelatedUbuntu :: Default Image Viewer Failed But GIMP Fine
Mar 19, 2011The default image viewer in 10.10 (eog) has met its match, a ~500MB image of the moon. I just thought it was kind of funny, while browsing the software center for an image viewer that could handle it, I noticed the description of the one installed by default and thought it was kind of funny, so I snapped this screenshot and thought I'd share it with you guys. By the way I have 4 GB of RAM and can view the image just fine in GIMP, just thought this was kind of funny.
Screenshot
Debian Multimedia :: Extremely Slow Loading Of Image Files In GIMP
Jun 16, 2010I've had this odd, stubborn problem that seems to be related to the nouveau video driver and certain kernel builds: opening or saving full resolution jpeg image files using GIMP takes from 1-5 minutes and causes xorg CPU usage to reach almost 100%.This also occurs when using UFRaw to open Canon raw image files. The problem is not intermittent, it happens each time I open a file. Opening photos in the default image viewer works fine.This bug has vexed me on and off for the last couple of months, and seems to be triggered by a combination of kernel version and the Nouveau driver. I switched to Debian Squeeze from Ubuntu 10.04 because I was experiencing slow image open times in Ubuntu 10.04 (using the Nouveau driver).I did not experience the bug running Squeeze with the nv driver and kernel 2.6.32-3.
I did not have the bug running Squeeze with the nouveau driver and kernel 2.6.32-5 backported from Sid.I began experiencing the bug again after the Squeeze updates on June 14th (still running nouveau and kernel 2.6.32-5). I update daily so it's likely to be that day's updates which caused the bug to reappear.Just for grins, I installed the Liquorix kernel. The bug does not occur using kernel 2.6.34-0.dmz.10-liquorix-686 and the nouveau video driver.I have a Nvidia FX5500 video card. I prefer the nouveau driver to nv as my display seems to behave better. The Nvidia proprietary drivers are not an option because they produce X freezes when I am doing photo editing. The liquorix kernel seems to be working fine, but for long-term stability I'd rather be running a mainline Debian kernel.
Ubuntu :: Gimp Batch Mode - Predetermined Layer On Another Image - Export As Png And Discard Changes
Jan 3, 2011I want a simple short gimp batch script that will take one image, paste it into a predetermined layer on another image, export as png and discard changes. Unfortunately, I can't find any tutorials on using gimp batch. Anyone know any such tutorials (Or better yet, what my script needs to be)
So far this is what I have. I need a way to loop through the layers to check the name of them, I also need a way to ditch the previously opened files from memory (Otherwise gimp still has both images in memory) (I'm going to mark this solved so I can make a cleaner post once I get it together)
[Code]....
Ubuntu :: Error: Eval: Unbound Variable: Gimp-image-insert-layer
Feb 14, 2011Errors received when trying to use drop shadow plugin..
"Error while executing script-fu-drop-shadow:
Error: eval: unbound variable: gimp-image-insert-layer"
"Plug-In 'Drop Shadow' left image undo in inconsistent state, closing open undo groups"
Fedora :: Show Better Grid Colors Yellow White Brown?
Jul 9, 2011Are there stylesheet differnces in fedora/mac/linux. For example in Mac or Windows my website which contains a grid [URL]... shows better grid colors yellow white brown etc. In Linux/Fedora it's pure white which kinda looks ugly. Is fedora missing something?
View 7 Replies View RelatedUbuntu :: Print To Image File Instead Of .ps?
Jul 13, 2010Is it possible to print a page to an image file (gif, jpeg, etc.) instead of a .ps? Not looking to take a screenshot, rather print an entire page.
View 2 Replies View RelatedUbuntu :: Print 1 Image Over More Than One Page?
Apr 30, 2011I have a rather large image that I want to print onto several pages. How would you recommend doing this? I've been copying sections and printing like that using GIMP, and I have had limited success using presentation type software, but is there a faster way of doing this?
edit #1: Being able to Print this to PDF or PS would be great.
(Office computer runs slightly modified version of ubuntu 10.04-LTS 32bit)
Ubuntu :: Print A Document With A Tux Image In Its Background?
Mar 6, 2010I want to print a document with a tux image in its background. I mean that the image of tux will be on the background & the article will be written over it,how can I do that?
View 2 Replies View RelatedUbuntu Multimedia :: Gimp 2.7 And Python (Import Error - No Module Named Gimp)
Mar 2, 2010If you had Gimp 2.6 (with gimp-plugin-registry installed) and installed Gimp 2.7 to try its new goodies, but Layer Effects are not showing, and when executing "gimp" from console you get these *nasty* errors:
Code:
This is a development version of GIMP. Debug messages may appear here.
gimp-user-install: migrating from /home/user/.gimp-2.6
Traceback (most recent call last):
File "/usr/lib/gimp/2.0/plug-ins/layerfx.py", line 23, in <module>
import gimp, gimpplugin, math
ImportError: No module named gimp .....
If you haven't install the 2.7 version yet. Before upgrading, backup "python" directory and then just restore it after installing 2.7.
Ubuntu Installation :: Gimp - Gimp-help-en - On 10.04 Lucid Lynx - Installing Other Applications And Preforming System Tasks?
Jun 12, 2010Some of you may have had with issues after installing GIMP on Lucid Lynx 10.04. Which may be directly related to "gimp-help-en", which could prevent you from installing other applications and preforming system tasks. If so, use this method to fix it.
Process: (Terminal > $ sudo apt-get install gimp)
1. After installing Gimp go to the terminal:
2. Then load up the language support application:
3. Then it will ask you to install the "gimp-help-en", confirm it.
4. Fix'd
I think this issue is directly linked to a systems with multiple languages, but I haven't been able to test this theory out yet.
Programming :: PHP Booleans - Print Draw The First Image From A Function Then Hide The Rest Of The Images Using 'display: None'
Jul 29, 2010I have this function that is supposed to print draw the first image from a function then hide the rest of the images using 'display: none' however for some reason the boolean test does not seem to work on one of my servers however it works on another, is there some php.ini setting I am missing or can you see any issues with the following code:
[Code]....
Slackware :: Can't Print - "Unable To Open Image File For Printing!"
Jan 18, 2011Since slackware 13.0 (upgraded to 13.1), I haven't been able to print anything. I can add printers no problem using the cups gui (or whatever). However any print I send to any printer fails because of:
"Unable to open image file for printing!"
I can post the whole error log if that helps, but I can't see much in it. I haven't been able to print for about 6 months, which is getting a bit annoying.
p.s, as a I lazy option I upgraded to the cups in -current, but that didn't help (although I don't think it was a very different version).
Fedora :: Install Gimp On 15 32 Bit?
Jun 20, 2011How to install gimp on Fedora 15 32 bit ?
View 8 Replies View RelatedFedora :: Can't Find Layers Box In Gimp / Get It?
Aug 8, 2009I do a lot of artistic stuff, so I need a good graphics program. I think Gimp will be perfectly fine for my needs for the time being, but I can't find the layers box. When I opened it for the first time, only the toolbox and tool options were open, and I can't find anything about the layers. I checked the online manual, and that didn't help at all. I have version 2.6.
View 2 Replies View RelatedFedora :: Xsane Not Working With Gimp?
Jan 7, 2010I have a new hp photosmart c4780 printer, and it's not working with gimp (which is the REASON i upgraded from fedora 10 to 12). I upgraded to 12 after i bought it a few weeks ago, and still can't scan from it. I have sane, and xsane installed
View 8 Replies View Related