My totem can't watch any video but vlc is so good. this is my Problem: screenshot 1 : after select a video screenshot2: do it as that i installed total gstream plugin( "total" as in ubuntu) and used codec win but not solved.
View 6 Replieswhich RPM contains Gstreamer audioconvert and videoscale?, I discovered the 'yum provides *videoscale*' command. Turned out to be gstreamer-plugins-base.
View 1 Replies View RelatedI just updated my distribution to 11.3 from 11.2. But now this problem occurs when I try to play an mp3. There was no problem before with 11.2.
It also says
Code:
The following plugin is required : MPEG-4 AAC decoder
Only certain mp3s have this problem. All gstreamer packages have been installed. What package is missing anyway?
I installed an MP3 plugin, and tried to play a podcast on Rhythmbox, and was presented with an error message, which said: Your GStreamer installation is missing a plugin. How can I remedy this?
View 1 Replies View RelatedI've downloaded the source code of monkey-audio ape codec.When I typed ./configure,there came the following error message:
checking for gstreamer-0.8 >= 0.8.0 gstreamer-plugins-0.8 >= 0.8.0... configure: error: you need gstreamer development packages installed !
what can I do now ?
When I was playing a movie with totem, a message would come out to ask me whether to search the plugin "GStreamer element deinterlace", but it can't find this plugin. when I choose to close the message, the movie can be played normally.
View 2 Replies View RelatedI've made it my new years resolution to sort out my video collection
I know totem can create a png montage with the frames of a video, however, I've only been able to create one at a time. If i told you i have 621 videos to deal with, you can understand why im asking this question.
Is there anyway in which i can script this, so i can can do the entire directory, name the png the title of the film while my pc is doing nothing?, I've looked at the "man" for totem, and there doesnt seem to be anything in there.
Or alternatively, suggest alternate software, which can do the whole thing without scripting?! I've already looked at GframeCapture, but that doesn't do it also.
My DVD will not play DVD's. I can only play cd's/music. The drop down box tells me that an additional plugin is required to play the dvd content and do I want to search for this now. Naturally I said yes. The next drop down box says that search could not find plugin in any configured software source. I have been to www.liba52.sourceforge.net and found ; a52dec-0.7.4.tar.gz I'm not too confident about using this, but have it in my 'home' file on the desktop. If anyone thinks it is ok, how to install it. If its not ok, can you tell me how I can obtain the appropriate plugin. I have Fedora 10 installed. The DVD is a Pioneer 104.
View 4 Replies View RelatedSo back in May I built a really sweet new box for my desktop running Ubuntu and put my old one out to pasture as a Fileserver running Squeeze. Well I have a very large DVD collection (900 disks 400 or so titles) that I'm trying to get ripped to hard disk for my popcorn hour. LONG STORY SHORT. When I put a dvd into what should be headless, keyboard-less, and mouse-less fileserver to use vobcopy with it starts up Totem (gstreamer) and loads the dvd menu. ARGGG. I then have to plug in all the hardware, close it, and go back to just using my desktop because it's less of a headache. How can I disable Totem from being a poopy pants and loading every DVD I put in the drive?
View 1 Replies View Relatedi want to watch a movie in totem but it asks for a plugin MPEG layer-3 codec how can i install this codec preciate
View 4 Replies View RelatedHello. I use dvd::rip 0.98.10 to create .wav sound files from DVDs and then play them in Totem Movie Player 2.28.2 (using GStreamer 0.10.25) mainly because I like the visualizations. It always used to work, but a recent batch will not play. I get: GStreamer encountered a general stream error. I probably used a more recent version of dvd::rip for the ones which don't play. Both MPlayer and VLC Media player plays them without a problem and older rips play fine in Totem too. The Audio/Video properties of a 'faulty' file (as shown in Nautilus) are greyed out for codec, channels etc., whereas a 'good' file shows Audio properties as Uncompressed 16-bit PCM audio etc., but running soxi on a good or bad file gives the same (good) results. I'd like to get this working, without doing anything to the .wavs preferably, so I guess I need to do something to Gstreamer, but I'm really not sure how to proceed. I'm using Linux Mint 8 64bit (rt kernel) and very nice it is too.
View 1 Replies View RelatedWhen I try to use Rythmbox, I got a message error saying that your "GStreamer installation is missing a plugin" and it says that is ID3 tag demuxer I already have this streamer plugins installed, so I don't know which one is missing
[Code]...
Does anyone have a working example of using the spectrum plugin for gstreamer?
I've searched the net high & lo and can't find anything.
Fedora Core 11 and installed songbird via songbird wiki website.I want to play mp3 files with songbird (which is basically why i downloaded it cos i dont like amarok) but when i try to play a file, it gives this message:"MediaCore Error: An id3 tag demuxer plugin is required to play this stream, but not installed"i searched a lot on web but couldnt find a solution
View 14 Replies View Relatedidentify for me the package(s) that contain the gstreamer plugin for ogg-vorbis (both video and audio)?
View 7 Replies View RelatedJust installed Clementine audio player, but it won't play mp4s. It says gstreamer is missing a plugin, google search turned up some leads but they didn't lead anywhere. Mp4s work fine in Amarok, and i have already installed the restricted extras package.
View 9 Replies View RelatedI'm trying to view a movie in totem but an error occurs saying missin plugin text/html totem can't find im when it asks to search for. what can i do to solve this error
View 5 Replies View Relatednow VLC is back again in Packman repos, but ... now I've got this issue:
Code:
#### YaST2 conflicts list - generated 2011-05-13 07:58:10 ####
patch:gstreamer-0_10-plugin-hal-4496.noarch conflicts with gstreamer-0_10-plugins-good-lang.noarch < 0.10.28-1.2.1 provided by gstreamer-0_10-plugins-good-lang-0.10.28-1.pm.40.3.noarch
[code]....
is it safe to apply this patch through "vendor change", but immediately after redo "switch system packages to packman"?
I've been using OpenSUSE 11.4 with GNOME for quite a while now and so far I've been a happy camper. This morning I decided to try GNOME 3 and the install went smoothly, with the only exception of rhytmbox(my music player of choice) not being available.Later I found rhythmbox for GNOME 3 in this repo: Index of /repositories/ GNOME:/ Apps/openSUSE_11.4+GNOME_STABLE_3.0.It works well but the Cover Art plugin won't load because it fails to import python-gstreamer.Should I report a bug against OpenSUSE 11.4 or maybe I am doing something wrong?
View 1 Replies View RelatedI am trying to backup some commercial DVD movies which I own. I just want to take them with me abroad without filling up my luggage with DVD cases. So there are no copyright issues here and I will do it anyway, the only point is that if I can convert them to .avi I can save 4 or 5 movies on a blank DVD whereas if I have to copy the .iso images I can only save one DVD per blank DVD. So it's a bit of a waste.
dvdrip doesn't work on this one, so I tried via vlc. It was still running when I went to bed and this morning I had to reboot, I didn't think about it so I didn't check to see whether it had finished or not before rebooting. I decided to check the output file before writing it to a DVD and clicked on it. Totem told me it didn't have the required plugin and asked me whether I wanted to install it. I said yes and was asked for root password. It offered one choice:
GStreamer fluendo MPEG2 demuxing plugin Fluendo codecs to decode mpeg streams I clicked on "install". It started to do something - the mouse cursor turns into a little spinning wheel when I hover over it - and it stayed like that. It's been like that for the last 3 quarters of an hour.
Does gecko-mediaplayer uses gstreamer codecs such as gstreamer0.10-base-plugins gstreamer0.10-good-plugins gstreamer0.10-bad-plugins gstreamer0.10-ugly-plugins gstreamer0.10-ffmpeg or is it only totem-plugin that does? I it necessary to have gstreamer codecs installed if you only want to use gecko-mediaplayer?
View 1 Replies View RelatedI am using the following:
ubuntu 10.04 LTS
firefox 3.6.17
totem 2.30.2
As it stands, if I play an mp3 file via the web, firefox will launch totem which will in turn launch goom.
Looks nice, but I would like to turn off the Visualisation which takes up the entire CPU. I try under firefox preferences, Edit->Preferences->Plugins, there isn't anything there I can change.
I try under firefox Utils->Plugins and there isn't anything there I can change.I try using gconf-editor, there are different settings there I can play with like: Under /apps/totem/visual it has the setting "GOOM: what a GOOM!", I try and delete it, it doesn't change anything.
Still with gconf-editor I try changing /apps/totem/plugins/screensaver turning the setting of "active" to uncheck. No change, goom still comes up with the fantastic graphics I just don't want. Still with gconf-editor I try changing /system/gstreamer/0.10/default/visualization from "goom" to blank. Again, no change.
If I look under the process list while totem is running goom I see the following: /usr/lib/totem/totem-plugin-viewer --plugin-type cone --user-agent Mozilla/5.0 (X11; U; Linux x86_64; fr; rv:1.9.2.17) Gecko/20110422 Ubuntu/10.04 (lucid) Firefox/3.6.17 --referrer http://blah blah blah blah.mp3 --mimetype audio/mpeg
There doesn't seem to be anywhere I can change the command line which is being passed to totem to make it behave differently and turn off the goom visualizations. I have tried starting up totem as a stand alone application, there I go into Edit->Preferences->Display and make sure the choice for "Show visual effects when an audio file is played" is unticked. That gives me the results I am after for totem as a stand alone application, which is no Visualizations whem audio file is being played BUT It makes no change for totem running as a plugin in firefox.
I installed the greasemonkey script "..... without flash auto" to replace the ..... player with the default totem plug-in in firefox. The script is awesome because now I don't get bogged down with flash when watching ......
Everything works as expected, but the problem is that the plugin doesn't stream, I have to wait until the video finishes loading before I can play it. Ironically, if i don't use the plugin and directly open the video cache in /tmp with totem, it was able to play even when the video wasn't finished loading.
I am not sure if this is normal, but I find it a huge annoyance. Does anyone else running this script have the same problem? I don't know if it is the script, the plugin, or my configs in general. A push in the right direction would be greatly appreciated.
im running Xubuntu 10.04 btw
The symptom is that I can't no more listen to my favorite Web Radio [URL] if you want get a try, very good music: ). It's a steaming with the url like "mms://web-stite-broadcasting". I swear few upgrades ago it was working. I can't remember when exactly stopped, probably with the last firefox update. What happen? I can see the Totem Browser Plugin 2.30.2 loading and then..."Stopped", he says. If I click on "open with Movie Player", Totem starts and give the error "Could Not Write to resource".
Beside curse my browser I purged/reinstalled firefox and some plugins without success. The odd thing is that other web radios seems to play when, as I can see, the (in)famous plugin-container is not executed, I don't know why.
Sometimes for web TV one is offered a menu where the video is divided into sub chapters where you can jump right to this part of the video by clicking in a chapter menu (very similar to playing a DVD). Well, this does not work for me. Clicking a sub chapter only set the video to play from start, and sliding the bar only freezes the player with a white screen. I'm running 10.04 (64b), Firefox 3.6.9, with the latest Totem-plugin.
View 3 Replies View Relatedhow to use the <Super>ButtonX (<Super>Button1 for example for the enabled Compiz Screenshot plugin)? I also notice there is configurable buttons 1 throught 20 under the various options. At first I thought the ButtonX was a mouse button. Maybe it is with some anticipation of there being eventually being a possible 20 buttons on the mouse. I know the Super key is the Key with the Windows logo on it. But I don't know what to do to get the needed Super Key / Button combination. After having enabled Compiz's Screenshot plugin by its default, I don't get an image after hitting any of the Super key and mouse button combinations. I'm running Ubuntu 11.04.
View 2 Replies View Relatedthe movie player which i have installed cannot play .flv files. it says, 'flash demuxer' is the required plugin' which is not found... what should i install to make movie player to play .flv files??
View 1 Replies View RelatedError: GStreamer error: Internal GStreamer error: negotiation problem. Please file a bug at url. Additional information: gsturidecodebin.c(1563): setup_source (): /GstPlayBin2layer/GstURIDecodeBin:uridecodebin0:
Can't link source to decoder element
i get this error when i look in the error console
I want that I click with the mouse on the video, it paused.I notice that there is "BaconVideoWidget" which I guess is the video rendering widget but it don't have signal named "clicked":
Code:
vd = totem_object.get_video_widget()
vd.connect("clicked", vd.hide)
[code]....
I',m having trouble running the zotero openoffice integration plugin in F13 under the openjdk plugin.It's known top be not working as per The problem lies in some permissions as reported here -fedora-linux/However i want to know if there's any progress on it, since i dont have privilege to install it in my lab computer. Also i found this old bug reportwhich seems to have something done.If anypone has any idea please post, else i think i need to file a new bug report.EDIT: I'd be glad even if someone can guide me to write local policy (.java.policy) to enable the plugin
View 1 Replies View Related