Ubuntu Networking :: Can't Make Install Wireless Driver - Meerkat 10.10
Nov 30, 2010
I am using Maverick 10.10 on a Toshiba Satellite Pro L510 which has this card, full output from lshw:
[code]...
So far, I've figured out that 'Error 2' basically means any of probably a zillion or two possible errors. The line I have in bold is obviously the one. I have searched, dug, probed, but can not work out what it means or where to start fixing it. Reason I'm bothering at all is that yes, the Realtek card worked 'out of the box' but is pretty unreliable, a third and less the speed of the other machines in the house
View 9 Replies
ADVERTISEMENT
Jun 21, 2010
How To: Uninstall/Remove Old Wireless Driver to make way for New Driver (RTL8191SE)?
Here's the new driver:
I have been having trouble with my wireless connection intermittently disconnecting and reconnecting repeatedly (sometimes every couple of seconds). I posted a thread about this here on Ubuntu Forums titled: Ubuntu 10.45 & NetworkManager Applet 8.0: Connects & Disconnects Frequently.
View 2 Replies
View Related
Mar 24, 2010
It says "device not ready" ive read a lot of posts with problems that seem the same but i dont know which fix actually applies to me. im running karmic on an ppc with the b43-fwcutter driver.
View 3 Replies
View Related
Feb 16, 2011
I've been trying to make/compile the driver for a wireless card. The card is usb, it's titled Micronext MN-WD550M and seems to use the rtl8712 driver.Firstly, though I did this once two years ago I seem to have completely forgotten how to install a driver in ubuntu.
Secondly, I'm not sure I have the right driver anyway since in the notes in the readme it says it is for i386 (I run amd 64). The driver is here [URL] Thirdly, after clicking through various readmes and documentation without feeling any more intelligent, I then tried using ndiswrapper to install a windows driver and ubuntu would crash if the usb wireless card was plugged in. Blarg.I feel like this should be so simple I'm going to make a clean installation of ubuntu 10.10 shortly (for various unrelated reasons) so anything I messed up with ndiswrapper should be back to normal.
View 1 Replies
View Related
Oct 16, 2010
I have an Asus K60 laptop with the Athlon chipset. I had wireless working just fine under Lucid. But after upgrading to Meerkat, I can't get my password to be recognized. The router connection is seen without any difficulty, but the WPA password is rejected every time. I've rechecked it, of course, and also checked that it works in the Windows partition on the same machine. I'm using wicd and madwifi, recompiled for the -35 kernel. Here's the relevant output of lspci:Quote:
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
03:00.0 Ethernet controller: Atheros Communications AR8121/AR8113/AR8114 Gigabit or Fast Ethernet (rev b0)
[code]....
View 3 Replies
View Related
Aug 14, 2010
I downloaded my linux wireless driver (realtek 8191se), but I don't know how to install it because there is no .exe file(like windows). It has a readme file which says :
"You can enter top-level directory of driver and execute follwing command to Compile, Installation, or uninstall the driver:
0. Change to Super User sudo su
1. Compile driver from the source code make
2. Install the driver to the kernel make install reboot"
View 1 Replies
View Related
May 2, 2011
I just upgraded ubuntu to 11.04 and I need to install the wireless driver again. I downloaded the driver and I am getting the following error when running make:
./kernelversion.c:13:30: fatal error: linux/utsrelease.h: No such file or directory
compilation terminated. Makefile.inc:81: *** Cannot detect kernel version - please check compiler and KERNELPATH. Stop.
Here's what I already installed on my laptop trying to get it fixed.
gcc version 4.5.2 (Ubuntu/Linaro 4.5.2-8ubuntu4)
2.6.38-8-generic
lrwxrwxrwx 1 root src 22 2011-05-01 22:16 linux -> linux-headers-2.6.38-8
drwxr-xr-x 24 root root 4096 2011-04-30 17:40 linux-headers-2.6.38-8
drwxr-xr-x 7 root root 4096 2011-04-30 17:40 linux-headers-2.6.38-8-generic
drwxr-xr-x 4 root root 4096 2011-05-01 22:10 linux-source-2.6.38
[Code].....
View 9 Replies
View Related
Feb 12, 2010
I have recently installed kubuntu 9.04 on my laptop. i then connected an ethernet cable and upgraded it to kubuntu 9.10. but i would like to connect to the internet using wireless. but i do not know how to install the windows wireless driver for my card on this OS. my card is: D-link AirPlus G DWL-g630.
View 6 Replies
View Related
May 3, 2010
I have been struggled with wireless connection. Here is the things... My room doesn't have moduler jack. So basically my landlord is sharing with his wifi. Also, my desktop is using Netgear wireless adapter for internet. My laptop and desktop are windows 7 which can conncet with internet very well. But my Linux Os in my desktop couldn't conncet. Recently I installed ubuntu because my co-worker told me ubuntu can be applied to connect with internet through wireless.
However, how can my ubuntu os get wireless connection without ethernet cable. Actually, my harddisk drive is multiple boot containing windows 7, Ubuntu, and Centos. Windows 7 can connect internet smoothly. But you know, Ubuntu and Centos can't do nothing. So I am stacking this situation not to connect internet through Linux OS right now.
My Netgear USB adapter is WG111US.
View 1 Replies
View Related
Jul 25, 2010
install a wireless card driver.
View 4 Replies
View Related
Sep 10, 2010
Can't install wireless network driver. The output of 'lsmod' is:
Module Size Used by
ndiswrapper 183164 0
i915 172552 2
drm 142208 3 i915
[code]....
And the output of 'sudo rmmod ssb' is:
ERROR: Module ssb does not exist in /proc/modules
View 4 Replies
View Related
Dec 27, 2010
Told me to fo to /var/log/jockey.logGot this I believe? what may be wrong?
2010-12-27 21:22:37,907 WARNING: /sys/module/wl/drivers does not exist, cannot rebind wl driver
2010-12-27 21:22:37,990 DEBUG: BroadcomWLHandler enabled(): kmod disabled, bcm43xx:
[code]....
View 9 Replies
View Related
Jan 8, 2011
I am trying to install usb wireless network card drivers on to lucid. I didnt think i was soo much a noob but it has come apparent to me now.Anyway when i use 'sudo make' i get errors that i do not understand.
View 4 Replies
View Related
Apr 29, 2011
In Ubuntu 11.04 32-bit
Dell Studio 1558
Everytime I want to active it I got the following: installation of this driver failed. have a look at the log file for details: /var/log/jockey.log I don't know if this is related to Software Sources, I only have Canonical Partners and Independent. I installed Ubuntu 11.04 from an ISO file and used the whole disk
View 3 Replies
View Related
Jun 16, 2011
My netbook wireless card is ralink3090,it works fine in ubuntu10.10 after I upgrade to 11.04 it down.
I downloaded a driver from http://www.ralinktech.com/support.php?s=2,but I can not install it.
Code:
View 3 Replies
View Related
Sep 23, 2010
When I installed Arch Linux on my Toshiba L10 Intel Centrino laptop, it detected my video card and monitors correctly "out-of-the box". Now that I've installed Ubuntu 10.10 "Maverick Meerkat", it has not.
How can I configure Ubuntu to use the correct Intel drivers with my Intel 82852/855GM graphics card?
View 2 Replies
View Related
May 13, 2011
I am trying to install an Asus USB-N13 USB Wireless Networking stick on an Intel-chip laptop loaded with Debian squeeze release. I have built a driver (rt3070sta.ko) and the "insmod rt3070sta.ko" seems to have worked fine. I can see the driver with "ifconfig ra0" and I can set an ip address with "ifconfig ra0 inet...".HOWEVER: 1: The gnome network manager doesn't see any wireless networks to connect to.2: If I try "ifconfig ra0 up" I get "SIOCSIFFLAGS: Operation not permitted"I am doing this from a root window and my login has root privileges. I'm missing a last step - what is it?
View 2 Replies
View Related
Dec 19, 2008
I have installed backtrack 3 on vmware workstation. I would like to install a TP-link TL-WN650G wireless card(atheros based - AR5005GS) onBacktrack because that it supports packet injection. Backtrack doesn't automatically recognize the device so I need to install the driver, I have done some research and found I needed to install the driver 'madwifi-old'(ieee80211 version) from here..http://aircrack-ng.org/doku.php?id=madwifihttp://madwifi-project.org/However I have no idea how to install them from inside backtrack, so if someone knows please let me know.
View 1 Replies
View Related
Dec 19, 2010
I want to install the wireless lan driver in rhel4. I searched for the driver in internet, i got only Realtek rtl8185_linux_26.1031.1207.2009.release.tar.gz, how to install it in RHEL4.
View 1 Replies
View Related
Jan 24, 2011
So I am trying to install my Realtek 8191SU wireless Driver but because I am a noob I don't understand everything that they say in the read me file from where I downloaded the linux version of this driver. The Realtek 8191SU wireless driver can be foun here:
[URL]
how to instlall the driver but I don't know where driver directory is. Here is the site
[URL]
I use and acer aspire Z5751 and I have ubuntu 64-bit installed.
View 9 Replies
View Related
May 12, 2011
I absolutely love Lubuntu on VirtualBox. I installed it to my Compaq Mini CQ-10 without issue. However, there are no drivers for the Wireless or the NIC. Ok, so I go to Broadcom and download the drivers. But, when I try to install with the Makefile, Terminal tells me that make is not installed! Now, how do I install my drivers without make?
View 4 Replies
View Related
Sep 20, 2010
I am a complete novice when it comes to Linux. I have just installed Debian 5 and i would like to get the wireless adapter working. I have a Ralink RT2070 54Mbs Wireless USB Adapter and the driver disk. What are the steps/commands i must follow to install the driver please?
View 15 Replies
View Related
Aug 2, 2010
I have Ubuntu 10.04 installed and can browse the internet via cable, but wireless isnt working. My wireless driver is "Broadcom 802.11b/g WLAN".
In the windows device manager, I found the corresponding inf file to be oem20.inf which I tried to install it through "Setup Windows Driver" but it gave an error saying invalid driver. I also tried installing the Broadcom STA driver, but that didnot help.
I am dual booting with Windows 7, and i installed ubuntu through the windows wubi installer. My laptop is HP Pavilion dv4. I have installed the regular Ubuntu desktop and have made all upgrades. The results from lspci command i have added below.
gowda@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
[Code].....
View 2 Replies
View Related
Dec 1, 2010
I don't have a wired connection to internet. I have only a wifi connection. Is there any I could download a driver and install or myself in fedora 14??
View 14 Replies
View Related
Feb 9, 2011
I have CentOS 5.5 and I can't install the driver for the Atheros AR5006X Wireless.The current state of my CentOS is:
*) If I run lspci, I get 03:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) (wrong model)
*) If I go to System->Administration->Network, I see the wlan0 device with xlan0 name, but if I tried to active I get: (and the same when the system is rebooting)
Error for wireless request "Set Mode" (8B06):SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0...
View 7 Replies
View Related
Jul 17, 2011
i recently purchased a new custom-built computer and thought i would give ubuntu a shot (read: i'm a linux noob). i'm running 11.04. anyway, i can't get my pci wireless card to work. i downloaded the rt3562 driver from ralink's site, followed the directions in this tutorial url?t=1608095 and i keep getting an error message when i try to do "sudo make":
Code:
make -C tools
make[1]: Entering directory `/home/brock/DPO_RT3562_3592_3062_LinuxSTA_V2.4.1.1_20101217 2/tools'
gcc -g bin2h.c -o bin2h
code....
View 3 Replies
View Related
Jun 21, 2010
It has been haunting me for weeks and I haven't been able to fix it so far: When I installed the wireless driver 43XX series on my laptop using a wired internet, I saw the wireless network for a while and after I rebooted my system, My kernel(31) got corrupted and I got error "kernel Panic (and some sync error)",Thus I started using an older kernel(14),Now When I install wireless driver or mobile broadband driver(wvdial), they get vanished after the reboot and my mobile device modem isn't detected.But they are installed in my system(as shown by synaptic package manager but doesn't seemt to work) I desperately want to use mobile broadband.
View 1 Replies
View Related
Nov 21, 2010
I was living peacefully with 10.04, till I upgraded to 10.10. The upgrade was smooth except for the ATI driver.Now I have no driver (nothing at System>Admin>Additional Drivers)glxgears does not exceed 60 fps. Life is too slow.Using synaptic, I installed fglrx, this broke everything!glxgears now gives segmentation fault. Booting is not graphical anymore, but rather a low-resolution `Ubuntu 10.10' big-font text.Can any1 help me install the correct ATI driver (if any) and get rid of the corrupted fglrx synaptic driver?
View 6 Replies
View Related
Mar 17, 2010
The relevant details of my setup are:
Samsung R522 laptop
Realtek RTL8192E wireless network controller (PCI)
Fedora 12, kernel 2.6.32.9-70.fc12.i686 (automatically updated using software update)
My problem is that my wireless card has never worked - basically there aren't any widely available linux drivers, and there are many threads on getting the RTL8192E to work on many different forums, e.g. here, but none specifically for Fedora, so I think that this thread could potentially guide many more users. FYI, my hardwired network connection works perfectly.
Fantastically however, by emailing Realtek support, they'll send you their Linux driver, which most people have claimed works perfectly (although why they haven't just put it on their website is beyond me). SO, I've got a Linux driver for my wireless card. When Realtek emailed me to send me the driver, they said to just 'cd' into the driver directory, then do
su
make clean
make
make install
reboot
./wlan0up or ./wlan1up
OK, so I tried to do this and get the following error:
make: *** /lib/modules/2.6.32.9-70.fc12.i686/build: No such file or directory. Stop.
make: *** [all] Error 2
I don't know enough about linux to understand this error. I really don't want to have to recompile my kernel, and I hope there is some way to install this driver with not too much hassle. How to overcome this error, and install my wireless driver so I can get wireless network access on my Fedora 12 operating system. I've found Fedora 12 really easy to use so far, but this is proving quite hard!
This is the output of 'ls -lh' in the folder which seems to be causing the error, namely /lib/modules/2.6.32.9-70.fc12.i686/
total 3.1M
lrwxrwxrwx 1 root root 46 2010-03-16 22:53 build -> ../../../usr/src/kernels/2.6.32.9-70.fc12.i686
drwxr-xr-x 2 root root 4.0K 2010-03-03 05:28 extra
drwxr-xr-x 11 root root 4.0K 2010-03-16 22:53 kernel
-rw-r--r-- 1 root root 498K 2010-03-16 22:53 modules.alias .....
View 7 Replies
View Related
Dec 28, 2010
I am having some problems trying to find drivers for a couple of things that I have for my maverick meerkat 10.10 operating system. and the following items I need help with is a Microtek scanmaker x6 scanner, a logitech usb quickcam chat video camera, and a microphone (which I do not know the manufacturer). were I can find drivers for these three items so that I maybe able to use them. I also am having trouble with hearing videos on line, and have a problem with the drivers to be able to play dvds on my computer which I used to be able to do. there are other problems that I do not want to discuss at this time but will probably find the answers to them soon.
View 1 Replies
View Related
