I can't send or receive any files with the Empathy Messenger in F12, using the MSN Protocol.The Menu Entry "Send File" in Active Chat remains grey.When my Friends send me files they ask me to accept the Download but I see nothing.
View 4 Replieswhy I can't send and receive files with pidgin? when i send files it the dialog is always closing
View 2 Replies View RelatedNotifications from messenger pidgin or empathy.How can i get rid of this? URL...This is what bugs me when i have my pidgin opened.
View 1 Replies View RelatedI have been using Ubuntu 10.10 for a few weeks now (have been using Ubuntu/Linux on and off for quite a while). I had to work around some things for a while to get it correctly partitioned with Windows 7 and what not which led to me formatting and reinstalling a few times to get it just right. Along the way, I was able to upgrade my Empathy messenger from 2.32.1 to 2.32.2. I loved the upgrade as it has the notification icon for me installed which is much nicer than the colored envelope when someone sends me a message. I have tried to upgrade to it recently and it is not allowing me to do so. Can anyone help me upgrade back to 2.32.2 from 2.32.1?
View 4 Replies View RelatedI tried linking my MSN account to Empathy Messenger for the first time - all went well But.I went to my friends house the next day and he told me that my MSN account status on his Windows PC MSN was continuously logging in and out. My computer had been switched off all morning and only used the night before. I went home logged on to Ubuntu 10.10 Empathy and I was logged off - I logged on and then logged off and rang my friend he told me that My status was now showing "That I was away"
I have dual boot system (xp) I went and changed my MSN password and question- should I be concerned is this a known software glitch/ security issue?
I have Linux mail server, It always encounter this problem, when i shut down or restart the server. You cannot receive mail but you can send..i use the following services:
iptables -F
service iptables restart
service sendmail restart
[code]...
How I can send and receive SMS via CDMA Connection. I have tried Gammu (hangs) and Gnome-Phone-Manager (Can't run on GTK3). Gnokii? Well ... I'd like to hear from someone who has succeeded with it on F14. I don't like having to boot into Windows to check my Phone Credits
View 11 Replies View RelatedI'm new to Debian, but have used Ubuntu so I'm relatively familiar with APT. Ubuntu doesn't have backports, though, and I can't figure this out. I've checked the documentation for the answer, and I'm hoping that I'm just overlooking something simple.
I'm running lenny, and I want to install the Empathy instant messenger that's in lenny-backports (v. 2.26.2-1). I already have the stable package installed, and here's what happens when I try to upgrade:
michael@archimedes:~$ sudo apt-get -t lenny-backports install empathy
Reading package lists... Done
Building dependency tree
Reading state information... Done
empathy is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 118 not upgraded.
[Code]...
My laptop is dell vostro 3500, I am using ubuntu 10.10 marvic amd64 operating system.I have installed empathy instant messenger. And I added yahoo chat. from that yahoo account I want use the audio/video call. But I was unable use that feature.
View 8 Replies View RelatedRegarding few things I am facing problem :
1. How to send one copy of that outgoing mail generated from the source. It should cc to another mail id in server's backend while mail sending.
2. I don't have any domain - internally or externally. Only have static ip, accessible from outside. Can I configure sendmail to send-receive through that ip.
3. How to transfer all mails and addressbook from exchange server to linux sendmail server.
Has anyone had success sending email with Balsa and Gmail. I can receive email, just can't send.
update. need to add the port to the server name.
I am using Empathy messenger 2.32.1 on Ubuntu 10.10. The issue I have is that try as I may, I cannot get the 'ungrouped' list empty i.e. there are always 6-7 contacts during every empathy login session that show up as 'ungrouped' even though I specifically grouped them into a user-defined group during the last empathy login session. For e.g. I login into gmail and facebook during session-A and classify all my 'ungrouped' contacts into relevant groups. I logout and log back in to session-B, and now I still see some of my grouped contacts go back into the 'ungrouped' pile.
View 1 Replies View RelatedMy laptop is dell vostro 3500, I am using ubuntu 10.10 marvic amd64 operating system. I have installed empathy instant messenger. And I added yahoo chat. from that yahoo account I want use the audio/video call. But I was unable use that feature.
View 1 Replies View RelatedI am doing work on serial port. I want to send/receive data to/from Microcontrolar through serial port. But I don't know how to initialize, receive and send data to Serial port. i am new in fedora so i hav'nt any deep concept of fedora.can anyone send me C code , which communicate through serial port in fedora (or atleast help me). I am using Fedora 11.
View 6 Replies View Relatedi'm using fedora 12 and i wanna send mail using command $mail actually i tried to send mail to my gmail , yahoo ,and hotmail emails but i didn't receive the mail so i expect that i should have some configuration on my host before sending mai
View 2 Replies View RelatedJust another newbie question here, I've recently changed my main OS to ubuntu 9.10 and everything is going swimmingly.Except a small problem with empathy IM. I have seen posts where people complain about it not being able to set its status to hidden for MSN, this is not what my problem is.My problem is as follows: when friends of mine who's status is set to hidden on MSN (them using windows and default MSN app) message me, I receive no such messages. They have to set the status to visable to be able to message me at all.
On XP I used Digsby, it could recieve such messages normally. So I am not sure if it is due to empathy being a 3rd party app.
Im trying to set up my 3G modem to recive and send sms but I had no luck so far
Code:
Bus 002 Device 010: ID 19d2:0031 ONDA Communication S.p.A. ZTE MF636Im I tried with gnokii and wammu and many other things and did not want anything to do
on ubuntu 8.04 and evolution has stopped sending or receiving when click send/receive button. it flashes something but too fast to read. i have renamed mail folder but no go. i have checked settings but no go. i have reinstalled evoulution from synaptic but no go.
i think i have a corrupt file or something like that.
I was running Ubuntu 9.04, no problems. I did a new installation of 10.04 and could not send or receive mail (Thunderbird). Both would time out. tried two other mail programs to see if Thunderbird was the problem, but they did the same.So I did dual boot installation, with 9.04 and 10.04. The same: mail OK in 9.04 but not in 0.04. So that seemed to eliminate everything as a problem outside of my computer.One night I remembered that ipv6 could be a cause, and toggled it in Thunderbird. It has been an "almost". I can now receive but not send.For example, the bottom bar will say: "Connecting to smtp.edicionescc.com" and after a while time out.I can ping smtp.edicionescc.com with no problem
Jos鼯textarea></p>
<input type='hidden' name='ID[5]' value='74701' />
<input type='hidden' name='URL[5]' value='http://www.linuxquestions.org/questions/linux-
[code]...
so I'm really new to using Linux, and I searched the forums, but most people seem to have trouble sending mail, not receiving it. When I send mail from the CLI, it gets delivered fine (from travis@travishoward.net) But when I try to reply or mail to the server, I get this message back:
Code:
----- The following addresses had permanent fatal errors ----- <travis@travishoward.net>
(reason: 554 5.7.1 <travis@travishoward.net>: Relay access denied)
[code]...
I used this tutorial to setup to setup iSpconfig postfix courier:but i cannot send or receive email:
Code:
-Queue ID- --Size-- ----Arrival Time---- -Sender/Recipient-------
B450C72116A 595 Mon May 2 17:33:50 www-data@mail.greensevenstudios.com
[code]...
I have it config'd to send and receive on multiple accounts and they all receive email, but SMTP times out and even sends no matter what account I try to send with. I thought maybe security and dropped the firewall and still won't send. No matter which account I try to send to it says its timing out trying access I have no problems on my Mac so no network problems. For grins I install Thunderbird and setup one account and same thing received but no send. What could it be blocking outgoing email??? I have CentOS 5 with all available updates.
View 3 Replies View RelatedI need help with my K mail I set everything up correctly but it does not send nor recieve email to my kmail. I however did recieve my email to my windows base email through charter internet but not through K mail can
View 2 Replies View Relatedcan't send or recieve E-mail. Running postfix , thunderbird squirrel mail. Thunderbird and squirrelmail connect to server but am unable to send or recieve. recieve connection refuses 111 can't open smtp stream. I seen a post mentioning port 25 : 587 for squirrellmail but I do not have exim.conf to update daemon_smtp_ports= 25 : 587 is this located in another file for suse 11.2?
View 3 Replies View RelatedI'm having trouble to send and receive e-mail using Thunderbird 3. When I tried setting up new account using the automatic configuration method,the result of scanning pop. and smtp. server returned 'none' with this orange circle. I assume it's the same problem that occurred when I first tried to install Evolution. But oddly,I manage to access the web-mail account provided by the ISP using the same information used to set-up Evolution and Thunderbird 3. Precisely I'm from Malaysia and the ISP is Streamyx.com. PC run on Ubuntu 9.10.And I've heard that the ISP is non-friendly of non standard e-mail applications.
View 4 Replies View RelatedI have a desktop that has been running Ubuntu for years. Finally I convinced my wife to get rid of windows XP and move to Lucid. I did a clean install of Lucid on her system writing over windows. After the install I installed Thunderbird using Synaptic Version 3.0.6 was installed on her system. On my desktop I am also running Thunderbird 3.0.6 We have several domains and mail servers on those domains.
They all use SMTP First, I installed the ISP email and that works perfectly. She can send and receive using our ISP's mail server. I then set up an email account in Thunderbird using the SMTP email server form one of our domains. She used to be able to send and receive from for one of our domains. She can receive email from that email server, but can not send (I can send and receive from the same domain using Thunderbird) Her SMTP and mine are set up identically:
Server Name: mail.[domain]
Port: 50
Username: [user]@[domain]
Secure Authentication: No
Connection Security: No
She is able to receive email but when she tries to send. the connection in Thunderbird either times out. or gives a password error. The password is correct, because we can use Firefox, and go to the pop and log in.Also, she can receive email direct on her computer and has to log in using her password. So I opened Terminal and tested using:
telnet mail.[domain] 50
I got
Trying [IP address]
Connected to mail.[domain]
Escape character is '^']'.
220 mail.[domain]
This leads me to believe something in Ubuntu is blocking her system from using Thunderbird to send emails through the email server. I've been at this for several days now. I did try totally un-installing Thunderbird using Synaptic. Then manually deleting the .Thunderbird file. Then doing a fresh install of Thunderbird using Synaptic. Still get the same results I am thinking that maybe App Armor is stopping this? Or perhaps some other security issue in Ubuntu like Linux Security Module? Otherwise the installation went flawlessly. We even got Skype working on the first try! Printers installed correctly and perfectly too.
Running Evolution 2.23.3.1 on a laptop with 8.04 installed. (Running 8.04 for good reasons - please don't query). I've been running perfectly for some time, but today when I booted up and opened Evolution to check my mail, the first sign of something odd was that it didn't ask me to unlock the keyring. Then I noticed that the send/receive was greyed out.
I rebooted several times with no change. I've clicked on Permissions in the File menu, but that doesn't then show any window, which is what I would expect, thinking that something has changed. Other than accepting all the usual update manager's recommended installs, nothing has changed on this laptop for several weeks.
I have tried setting up my hotmail account in evolution. I followed the steps from the following link: [URL] at the end it said click send receive, but the button is not enabled for me.
View 3 Replies View RelatedUbuntu 8.04 workstation
Gnome desktop
What will be the easy way to send/receive fax via modem? Not hylafax, nor efax nor send2fax (the online fax).
I am using ubuntu 9.04. I have configured Evolution on my laptop, but it is not working.
View 1 Replies View Related