I use lenny but when I use the example
time -f "%E real,%U user,%S sys" ls -Fs
-bash: -f: command not found
real 0m0.002s
user 0m0.000s
sys 0m0.000s
Is this a bug or what is wrong use the example from "man time"
i ran into a problem when i installed mplayer on suse 11.1 from source, it works just fine BUT it has no GUI.When i try to use the command "gmplayer", it returns 'bash: gmplayer: command not found
View 3 Replies View RelatedI was changing some file permissions with the chmod 777 command and i accidentally executed:
Code:
sudo chmod 777 /*/*/*/*
and now i can't get root access to anything. If I try executing a sudo command i get:
sudo: /etc/sudoers is mode 0777, should be 0440
sudo: no valid sudoers sources found, quitting
The title says it all...Which package(s) do I need ?
View 4 Replies View RelatedMy first day on a linux ditibution ever, windows user untill now. I just bought a dedicated server and used the automated tools to install debian.
Now I connected through ssh and I saw that python was already installed doing python --version (v2.7.9)
However running 'pip install beautifulsoup4' return -bash: pip: "command not found"
Is there something similar to windows environment variables that I need to set?
Is this a good resource to learn? : [URL] .... dating from 1999
I've just installed Debian on my old iMac G3. The install seemed to go ok but failed to load to the GUI. Thats ok I'll just enter some lines into the xorg.conf and it will be fine, or so I thought. Now at the shell prompt when I type in any sudo command it says: "sudo command not found" Is there an alternate command I can use in this situation.
View 3 Replies View RelatedI did install a brand new debian etch on my server, update and upgrade has been done.I did installed a postfix and couple of tools ( like courier-* ).But when i want to try to sent a mail with mail command, it says command not found.I did use the method on the bottom of this thread succesfully, but any idea for this tool to be back on my server ?Did i uninstall it when installing a package ?
View 1 Replies View RelatedOk i went to do
Code:
java -version
but it didnt work i installed it and everything i go to
Code:
cd /usr/java
but it doesnt exist
i am running Debian 6 x64
install java i am trying to run a mc server
I have installed Lenny in my labtop. I have problem to install packages; command "make" "make install" "configure" doesn't work. It return: "bash: make: command not found". So I can't install flashplayer :/ Well, I start with Lenny.
View 9 Replies View RelatedI have been following the Xen Beginners Guide here: [URL] .....
Everything was going smoothly until I got to the 'Configuring xen-tools and building our guest' section (two thirds down the page).
I installed xen-tools and then typed the following in a terminal window (as root):
xen-create-image --hostname=development-pv-guest --memory=2048mb --vcpus=2 --lvm=develop --dhcp --pygrub --dist=jessie
I admit PV is new to me, compared to simple HVM, so I have a number of questions:
1. Why the command not found error?
2. Should I be booting from the Xen option or regular boot option at the start up screen when creating the xen image? I've tried both and get the same error message.
3. I have Debian 8 (Jessie) installed on my system and I wasn't sure whether I should therefore make this the guest OS in my Xen PV. In asking this question I'm thinking in terms of HVMs - but I assume my Xen PV needs a guest OS of some kind? Or is my host Debian 8 already acting as a guest OS in Xen PV? I'm confused
4. If I do need to install a guest OS, is it better to go for an earlier version of debian - so as not to be so resource hungry?
I'm nervous about screwing up my host debian installation, so when I got the error message, did some research but found nothing meaningful. I don't want to end up having to reinstall my Debian 8 (base OS) ... again!
Well it didn't go smoothly for me. After downloading over 1,6Gb (!) of that new Debian version and restarting I was 'greeted' by a dreaded CLI instead of gnome. To make matters worse I got "command aptitude not found".
'apt-get' still worked.
Anyway, if you're gonna update check dependencies first. It seems I lost gnome due to gstreamer0.10-gnomevfs. So first uninstall that package if you got it.
I have a problem with my 64-bit version of Debian Linux Lenny. I have to run alsaconf every time I boot into the machine. I have tried to run this command followed by alsaclt store. It was no help, I still have to run the command every time to get sound, which makes it very annoying. Anybody know what configuration file I should be looking at, and what I should be changing. If you need a print out of any of my configuration files, just let me know what they are and where they are and I will post them. The sound was working fine for the longest time before, I think the whole mess started when installed KDE, E16, XFCE etc. I was trying out these new windows managers and seeing if I would like them. I don't really like them all that much as the gnome so I removed them.
View 6 Replies View RelatedI cannot find a bash command: "file" !
It say "-bash: file: command not found"
"file" is used to determine file type on a bash right ? is there a package i have to install ? deprecated ?
I use debian wheezy distro
I recently did a reinstall on my system and I am now running Squeeze. I am currently trying to get some software running, but I believe I am having issues with the graphics requirements. The software needs an X server with 8 bit / PseudoColor mode. It is recommended to work in "8,24"-overlay mode. This was set up on my old install on this computer, so I know it is not a problem with my graphics card. But in the installation guide it says to enable this function it is necessary to add some information in the file /etc/X11/XF86Config-4. The problem is I don't have this file. I had this file in my old install, but on the fresh install it is not there. I have the /etc/X11/ directory, and it contains: directories: app-defaults, applnk, cursors, fonts, twm, xinit, xkb, Xreset.d, Xresources, Xsession.d
and
files: default-display-manager, rgb.txt, X, Xreset, Xsession, Xsession.options, XvMCConfig, Xwrapper.config
I think I've looked through everything in the /etc/X11/ directory but I don't see anything that looks like the XF86Config-4 file. Is there possibly a package that I am missing or something I need to run to create this file? I know on my old install this file was created or modified by running 'xf86config' in the command line. I've tried that, but it tells me 'command not found'.
I am a ham radio operator and I want to use my computer to run "RTTY", "PSK31", and other digital modes. Therefore I have to be able to configure the serial port.
I only have the onboard port (ttyS0).
I can get info about the port by using "$ dmesg | grep tty"
Code: Select alldebian@melsdeb:~$ dmesg | grep tty
[Â Â 0.000000] console [tty0] enabled
[Â Â 1.533804] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[Â Â 1.534337] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
But when I try to use "setserial" by itself or with any parameters I get this...
Code: Select alldebian@melsdeb:~$ setserial -g /dev/ttyS0
bash: setserial: command not found
Even "man setserial" gives the same result.
I am using Debian 6
i have a debian 5 vps system.. it reports the time as beeing one hour behind, i have tried to change this by setting the time to GMT+1 and setting the time to my local region (Europe-Brittian) using the tzselect command but none get the time to the correct time, one hour ahead of the current time.
View 3 Replies View RelatedI have just installed Debian 8 with Gnome desktop and trying to add my username to sudoers list.
When I open terminal and enter visudo I get the following error message...
Code: Select allfracmo2000@debian:~$ su
Password:
root@debian:/home/fracmo2000# visudo
bash: visudo: command not found
root@debian:/home/fracmo2000#
Although I am quite new to debian, I have done this successfully in the past so not sure why this is happening?
Recently I've bought this motherboard : [URL] ...
And this graphic card : [URL] ....
Now I have attached two monitors on the computer,the first one (the monitor that is working) is attached to the DVI port of the nvidia graphic card,the second one is attached on the VGA port of the embedded graphic card of the motherboard.
Since I would like to play a little with blender,I need to use two monitors at the same time because in this way I can follow more video tutorials at the same time.
I'm using this version of debian :
Linux ziomario-Z87-HD3 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u1 x86_64 GNU/Linux
and this is the informations concerning the graphics card installed on the computer :
root@ziomario-Z87-HD3:/home/ziomario# lspci -nn | grep VGA 00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell Integrated Graphics Controller [8086:0412] (rev 06) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:11c0] (rev a1)
root@ziomario-Z87-HD3:/home/ziomario# xrandr
Screen 0: minimum 8 x 8, current 1920 x 1080, maximum 16384 x 16384
[Code] ....
How to use my two monitors together ?
I'm trying to boot into the Live CD (64bit version) and it dies with an error "nouveau .... 0x8DF6 Init table command not found: 0xA9". Get the same error after I install and try to boot into Debian, it starts booting but errors out later.
Running Intel 4770K on Gigabyte Z97X-UD5H with 8G ram, Nvidia graphics card and several SSDs ...
I installed a program with Yast (Kmess), but when I try to run it, bash gives me back this message:
Code: kmess: command not found I checked into Yast and it seems to be installed correctly!
I know my way around MS Windows much better, but I just don't feel right trying to program something for Android on a Microsoft operating system. I am interested in Android programming so I followed the instructions on [URL] to install the environment on my computer...
I just installed the JDK, SDK, Eclipse successfully (or I assume):
* When I get to Step 4 where I'm supposed to run 'android' it will not run. I get the error message "android: command not found" (I am definitely in the right directory).
** When I double-click it in nautilus, it opens up in gedit. I can set the permissions in nautilus (through the properties - Allow executing file as a program) and get it to work,
My system:
Intel i7
Ubuntu 10.10 Maverick Meerkat
android-sdk-linux-x86
eclipse 3.6.2
In the fstab it is written to run :
"vol_id --uuid"
and that it is a robust method...
but well there is not vol_id
command not found
I installed the Berkeley DB on the Ubuntu server and tried to access the dbxml from the command line and it returns command not found
path/to/dir/dbxml-2.5.16/install/bin$dbxml
-bash" dbxml: command not found
Can someone point me in the right direction
last week while I was using ssh to the computer1 inside a NAT as usual, I made another tunnel from the computer1 that I was connecting to, to another computer2 inside that NAT (ssh 192.168.1.130) and after making some changes in computer2 I typed reboot. The computer2 rebooted but the tunnel totally hung and I had to kill it in my laptop. Since that day I haven't been able to ssh to the computer1 as I am used to.
Here is some more information:
debug3: authmethod_is_enabled publickey
debug1: Next authentication method: publickey
debug1: Offering public key: /home/une/.ssh/id_rsa
[code]....
I have to trace back what command and when it is used for the last 3 months. It is quite urgent as I have trouble with the system configuration.
View 5 Replies View RelatedI've got a problem installing some Qlogic HBA firmware on a Debian box. For some reason the 'udpkg' command cannot be found when trying to run 'udpkg -i xxxxx.deb'. I'm getting this error: -bash: udpkg: command not found I don't recall ever experiencing this. I've tried to Google it but have had no success so thought I'd try some of you chaps on here.
View 3 Replies View RelatedIn Ubuntu 10.04 grub command prompt setup command does not exist for installing grub.I am trying to recover my Feodra12 OS.Did anyone find alternate command for setup in grub command line for Ubuntu 10.04 ?
View 2 Replies View RelatedI am a linux newbie, and recently started shell programming. whenever I use 'let' command it gives me an error 'command not found'. I am using ubuntu 9.10 with bash.
View 5 Replies View Relatedlogging in a server through putty in the same network when i executed last command its showing system ip logged in time and logged out time the output as followsthis is my system
oot pts1 xx.xx.xx day month date time in time out timeand similarly am geeting other than this likeroot :0day month date time still logged in this is from more than 3 days its logged in
Since the upgrade from Lenny to Squeeze on my Notebook Toshiba Satellite Pro U200 with Intel Pro/Wireless 3945 ABG I have wireless connection problems.The connection breaks time to time and sometimes cannot connect automaticaly after restart. BTW I didn't change anything on the wireless or network configurations on the notebook and on the wiereless router.
View 8 Replies View Related