I have downloaded a package when i have logged in with a user that is not root. I download the package and it is under the folder "Downloads". When i try to unzip the package it sägs that the user does not have the priveliges to run the command. When i change to the root with the command "su -" i cannot see the package to unzip it from the root user prompt. What shuold i do?
View 7 RepliesI've just installed a Debian wheezy and I'm experiencing some issues regarding the "locales". No matter what I've tried (ran "dpkg-reconfigure locales" and restarted my session, edited "/etc/default/locale" then ran "locale-gen") to update the locales, running "locale" in a root shell or as a regular user returns different results.
In a root shell, the result is the right one (similar to "/etc/default/locale").
I do not understand why locales values are different in one case or another.
As a side question, what is the correct syntax for /etc/default/locale ? Is it case sensitive (I've encountered "en_US.utf8" and "en_US.UTF-8") ? Are double quotes mandatory (encountered values with or without double quotes) ?
user@pc ~ cat /etc/default/locale
Code: Select all# File generated by update-locale
LANG=en_US.UTF-8
LANGUAGE=en_US.UTF-8
LC_CTYPE="en_US.UTF-8"
LC_NUMERIC=fr_FR.UTF-8
LC_TIME=en_GB.UTF-8
[Code] ....
I am running an updated Lenny. Just discovered that as user I am able to add new users via gui:
System > Administration > Users and Groups.
I was under the impression adding new users was restricted to root. Is this is a bug, and if so who do I report this to?
When launching any program (iceweasel, ssh, dropbox) that requires internet connection as a normal user it does not connect.
However if I try launching them as root it does. Sometimes, I have to manually disable/enable wifi and then reboot in order to access Internet, sometimes it works and sometimes it does not.
I have Code: Select all3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u1 (2015-12-14) x86_64 GNU/Linux
My resolv.conf has the following permissions
Code: Select allsudo ls -l /etc/resolv.conf
-rw-r--r-- 1 root root 26 Jan 12 05:03 /etc/resolv.conf
My Code: Select allsudo lspci is
Code: Select all00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 09)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 09)
[Code] .....
How to access Windows volumes from non-root users?
View 4 Replies View RelatedI'm going to set up an Ubuntu computer for my family. They asked for it, I didn't push them. But I know that they don't like passwords.
So my plan is to make an admin account which is in the sudoers group and then make induvidual accounts for the users. But I also want them to be able to install apps.
So I wonder if it is possible to set the computer so that they can use the software center. What is the best method to do this? The apps mustn't be installed system-wide.
How can i see history of all sudo users and all root users in fedora 13 ? history command only shows one users history ?
View 5 Replies View RelatedI am having trouble with flash player. Well first I had some trouble with my router and rebooted linux. Then, flash wouldn't play sound anymore. I updated flash etc but still no sound. Then I tried as root administrator and flash sound works fine there.
So I checked the sound preferences from the Control Center and found out, all output devices are set to autodetect instead to one of the output devices I have. But when I switched to the user account to change the preferences accordingly, no sound was played at all.. Also, when I want to use the loudspeaker icon at the bottom to reach the volume control in the user account, I get an error message stating there was some connection refused.
Deneck
I'm running 10.10 64-bit and have configured it for root graphical login for administration of the system. When I log in as root, I can run all menu items in System -> Administration with the exception of Users and Groups. When I try running this, the application starts, but I only get an animated spinning disk that doesn't stop, can't modify the users properties and I can't close the application unless I go to System -> Administration -> System Monitor -> Processes tab , highlight users-admin and click End Process.
View 6 Replies View RelatedFeb 10 (today) user qt4 extracts from cd /var/log/secure grep -i 'feb 10' secure Something wrong with pam or selinux? I have not fooled with pam or selinux in decades The secure file seems to report problems I do regular yum update s from secure: above
secure:Feb 10 08:00:20 localhost pam: gdm-password[2396]: pam_unix(gdm-passwordession): session opened for user qt4 by (uid=0)
secure:Feb 10 08:00:48 localhost polkitd(authority=local): Unregistered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session1 (system bus name :1.37, object path /org/gnome/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
[code]....
I can login to qt4 from another user via "su - qt4" I would be shot if I inserted the inserted secure file
I'm seeing a problem on RHEL5, whereby all users can receive mail (/var/spool/mail/<user>), but only root gets a new mail alert when logging in.
The relevant bash variables ($MAIL, $MAILCHECK) seem to be set for all users.
I have an Openldap server and many 9.10 servers using it to check for possible ssh users. No problems there. Just brought up my first 10.04 server and went through the same procedure to allow ldap users to ssh in, works great. The problem is that ldap users cannot su to root on the 10.04 server. Only locally defined users can su to root, though they cannot su to ldap users. The local root user can su to anyone. Quick overview of how I installed ldap login:
Code:
# apt-get install libnss-ldap
# echo "session required pam_mkhomedir.so skel=/etc/skel/" >> /etc/pam.d/common-session
And added ldap to the end of these lines in /etc/nsswitch.conf:
Code:
passwd: compat ldap
group: compat ldap
shadow: compat ldap
This process has worked without a hitch on 9.10 dozens of times. So my question is, why are ldap and local users now incapable of using su across authentication mechanisms? For reference these are the error messages in /var/log/auth.log when trying to su to root from an ldap user:
Code:
Jun 14 16:17:07 server unix_chkpwd[6560]: check pass; user unknownJun 14 16:17:07 server unix_chkpwd[6560]: password check failed for user (root)
Jun 14 16:17:07 server su[6559]: pam_unix(su:auth): authentication failure; logname=ldapuser uid=2000 euid=2000 tty=/dev/pts/5 ruser=ldapuser rhost= user=root
Jun 14 16:17:09 server su[6559]: pam_authenticate: Authentication failure
Jun 14 16:17:09 server su[6559]: FAILED su for root by ldapuser
And the auth.log for trying to su to an ldap user from a local one:
Code:
Jun 14 17:18:18 server su[8473]: pam_unix(su:auth): authentication failure; logname=localuser uid=1000 euid=1000 tty=/dev/pts/0 ruser=localuser rhost= user=ldapuser
Jun 14 17:18:18 server su[8473]: Successful su for ldapuser by localuserJun 14 17:18:18 server su[8473]: + /dev/pts/0 localuser:ldapuser
Jun 14 17:18:18 server su[8473]: bad group ID `2000' for user `ldapuser': Operation not permitted
I've been intrested in linux for the past few months. I'm using Ubuntu 9.x version on my laptop. I'm able to connect to wireless internet as a root user. However when I login as a non root user, I'm not able to connect to wifi. The NetworkManager program doesn't load at all. I've checked the permissions of /usr/sbin/NetworkManager file, it was 755. I did some googling and tried setting 'set user id' for it, resulting in 4755 perm. But still, I can't open up the NetworkManager utility to connect to the WiFi. But I've no problem logging as a root user. I just don't want to connect to Internet as a root user.
View 1 Replies View Relatedregarding the file permissions of /etc/passwd in fact it has permissions like rw-r--r--so it says others have only read only permissions but my questions is if others has read only permissions on /etc/passwd file.how they are able to change their password i.e others are able to change their passwords then how it is possible.
View 3 Replies View Relatedi have probleme when i want to log in as root in my OS "DEBIAN 5.04"
View 4 Replies View RelatedI am trying to set my java path so that it is in effect for all users including the root user. I set the path correctly in /etc/profile and that works for my personal user, but when i try to run the same commands using sudo, i get messages saying that it can't find the java path.
View 3 Replies View RelatedI have an ftp server and normal login works fine as well as ftps but for some reason sftp sends all my accounts to the root directory of the entire server (not good). Been searching around but can't find a fix.
View 6 Replies View Relatedhow can root list/edit crontabs of other users?
View 2 Replies View RelatedI just installed slackware 13.1. And I get the following error with a normal user when I connect my memory stick:
Failed to mount "Crucial". Rejected send message, 1 matched rules; type="method_call", sender=":1.211" (uid=1000 pid=2275 comm="exo-mount) interface="org.freedesktop.Hal.Device.Volume" member="Mount" error name="(unset)" requested_reply=0 destination="org.freedesktop.Hal" (uid=0 pid=1723 comm="/usr/sbin/hald)).
When run the command groups the user is member of the following groups: users floppy audio video cdrom plugdev power scanner
What else I need to change so the USB works?
Have a program, erlang, that needs to bind to a port lower than 1024, as a non-root user. How do you allow that on a system?
View 1 Replies View RelatedError message in /var/log/messages
login(pam_unix)[26769]:session opened for user root by LOGIN(uid=0)
login[26769]: Module is unknown
init: open(/dev/pts/0): No such file or directory
I have created a new user also but I couldn't login to the system. But I could login to the system as root and also with same new username password through putty from another machine.
i am using fedora 7. i want that, users other than root should not be able to shutdown the system, i had already changed the mode of /sbin/shutdown to -rwxr-w--(750)
View 1 Replies View RelatedI have a non-super user on my box which I'd like to give it MOUNT and UMOUNT permissions but I don't know how.For example purposes, the user name is "USER".I don't want to make it into a SuperUser, just give it rights to be able to issue the MOUNT and UMOUNT commands at the terminal.
View 6 Replies View Relatedwhen users login in kde4 it shows kstartconf4 not found or failed error code 127. for both suse 11. 1 and suse 11.2 but kde3 works well I removed .kde etc it still failed
View 5 Replies View RelatedI have wicd 1.6.1 (bzr-r426) and it is working very good with my root user but with all those which have not the root rights wicd asks for superuser password to connect. I want to avoid this pop-up window to be shown, how can I proceed? I first thought about the sid and gid but it seems that there is no improvements using chmod 4755 and 2755 on the different files involved in.
View 2 Replies View RelatedI find FTP server software confusing in Linux. Using ServU for Windows for an example, all I need to do is to create users via the ServU interface and choose a folder I want that user to have access to and their permissions, and viola, they can connect to that directory, and that directory only.
But in the the land of Linux, it apparently can't be managed this easy. I have a web server with multiple domains, and therefore multiple users need access to their own web root. So with that in mind, what FTP server software should I use (there are plenty out there) and how would I go about to create a user per domain, so that they can log in using FTP to manage their site, and only have access to their own web root, and nothing else?
When I try to start MySQL and httpd as a non-root user, I get error messagesstating that the user does not have permissions to start the services.I have checked the permissions of mysqld and httpd in /etc/init.d .. both of the files have rwxr-xr-x permissions.When I add the line%groupname ALL=(ALL) ALL in /etc/sudoers, I am able to run the services using sudo.How do I allow non-root users to install/uninstall/configure softwares and start/stop services ?I have tried with
SUI=/usr/bin/sudo -i, /bin/su
SOFTWARE=yum
%groupname ALL=(ALL) SOFTWARE, !SUI
[code]...
i am using fedora 7. i want that, users other than root should not be able to shutdown the system, i had already changed the mode of /sbin/shutdown to -rwxr-w--(750)
View 5 Replies View RelatedI need to customize linux kernel root file system for embedded linux system. During compile time, for root file system I am able to create different user/group ex: "gnumuzic/Muzic". But I want to give access to group "Muzic" to some folders like /dev/nexig during compile time.
View 1 Replies View RelatedI recently made the migration from mbox to maildir.I use postfix, spamassassin, dovecot for imap and procmail for delivery.I made the changes for Maildir to postfix main.cf, dovecot's dovecot.conf and procmail's procmailrc.All good, working well.Just noticed though, that mail marked as spam and filtered by procmail to be put in the users ~/Maildir/.spam/new folder are owned by root. Not allowing the users to even see it (600 perms)
So postfix sends all mail to Procmail:
mailbox_command = procmail -a "$EXTENSION"
But not all mail is effected, only mail picked up by this receipe in the /etc/procmailrc:
[code]...