On a new installation of Linux Red Hat server, I was adding new users from the list using "newusers" command. I did not realize that one of the users was "root" so this is what line I loaded by error (among other users) : root:root:1176:501::/home/circuser:/bin/bash all other users from the list (160 of them) got loaded properly. I still have valid root login that I could use, but I'm not able to log in as root anymore. If I log in as user and then try "su" or "su -" I get error: ": No such file or directory".
I compared /etc/passwd, group and shadow on this server with old one I'm replacing and entry for root looks the same:
root:x:0:0:root:/root:/bin/bash ( in passwd) root:x:0: (in /etc/group) root:$1$OILC.ETm$LkoGprgqqgv6v8oLRUBnf.:15153:0:99999:7::: (in /etc/shadow) - similar to my old server
On Ubuntu, there was this very sane feature (for laptop/desktop user): when you insert a thumbdrive or external usb media, the system mounts the media and sets all the correct permissions for the current non-root logged in user.
What do I have to change/edit/configure to make Fedora 15 behave like this?
I'm using squeeze. hal allows any user (at least, ones logged into the console) the ability to automount any removable drive that is plugged in. I want to restrict the ability to automount to users who are in the group that owns the device node for the drive (some distributions use the "plugdev" group for this.) I know I can turn off automount individually in each desktop, but seeing as hal is the thing that runs as root and is actually doing the mounting, it seems to make the most sense to change the setting in hal.
regarding the file permissions of /etc/passwd in fact it has permissions like rw-r--r--so it says others have only read only permissions but my questions is if others has read only permissions on /etc/passwd file.how they are able to change their password i.e others are able to change their passwords then how it is possible.
I'm trying to familiarize myself with LXDE to help a friend of mine and one thing I just cannot solve, despite many googles, is how to allow a non-root user to auto-mount drives in the left-hand pane of PCMANFM.Everything works just fine as long as I have the root passwd. Not a huge problem but very irritating none-the-less.
i am using fedora 7. i want that, users other than root should not be able to shutdown the system, i had already changed the mode of /sbin/shutdown to -rwxr-w--(750)
I need to customize linux kernel root file system for embedded linux system. During compile time, for root file system I am able to create different user/group ex: "gnumuzic/Muzic". But I want to give access to group "Muzic" to some folders like /dev/nexig during compile time.
i want to know the risk with auto mounting flash drive as a root user,if for example there is a Usb Flash drive inserted into the system and we login into root unknowingly, and this flash drive contains an autorun script which calls a new script that can place viruses in your system, since you are in the root it will not even prompt for password and if the script is fast enough you will not even see it executing.
Is there any way to grant access to non root users to use some commands like reboot and date and some other commands that root user can work with .I tried chmod on their binaries and added them to root group but nothing happened.
# external hard drive UUID=4DDD273633F3859D /home/ross/external ntfs-3g auto,exec,user,uid=1000,gid=100,dmask=027,fmask=137,utf8 0 0
When I plug in the drive with this UUID, I get the following error:
Code:
Error mounting: mount exited with exit code 1: helper failed with: Unprivileged user can not mount NTFS block devices using the external FUSE library. Either mount the volume as root, or rebuild NTFS-3G with integrated FUSE support and make it setuid root. Please see more information at [URL] Is there any way that I can mount this drive (which must be ntfs-formatted) without root permissions? I have googled this error and it seems that many other people are having this same problem, but I can't find a real solution. Most people suggest just reformatting the drive.
I've googled this many times but have not found a solution yet. Can you get external usb hard drives to automount at xfce startup? They automount if I plug them in once xfce is started. I have them connected at boot I get an icon for the drive which I can then mount. But I wonder if I can get them to automount at startup
Started slackpkg upgrade-up and went to bed. Woke up to find the power had gone out during the night. The computer booted up, but displayed a message that said something to the effect of, "Error occurred during root file system check. You will be given the option of doing maintenance......"I can get to a command prompt, but regardless of what I do a message pops saying it can't find libblkid.so.1
I have a luks-encrypted external drive with lvm on top. When I plug it in xfce prompts me (twice as usual) for the encryption phrase. Then, unlike when I have a regular file system on top and it automounts, I need to activate the volumes and manually mount. Is there a way to make these steps happen automatically?
How can I get a LUKS encrypted partition on an external USB device automounted with r/w access for non-privileged users?
Background: I just reformatted an external USB device with ext4. The only partition is LUKS encrypted. Now, when I plug the device to my computer, KDE notifies me and asks me to enter the LUKS passphrase. Then it mounts the device. Little snag here: Non-privileged users have read-only access.
My user is a member of group plugdev, but not of group disk, as this was discouraged several times, e. g. by Robby Workman. With non-encrypted disks regular users have read/write access, or can change the filemodes accordingly, as far as I recall (currently I have no more non-encrypted disks left to verify it...)
I tried to create a user on Solaris 10 but when I try to login the user with "su -" I get the error message "no directory". When I try to login with "su" I get the error message "no shell".
I tried the useradd several combinations e.g.
All the tries i made didn't work. I also checked the permissions on /etc, /bin, /sbin and / and it seems ok so that the newly created user can access them.
i booted into linux single mode thru lilo but i can't use any commands in slackware that changes the root account or user account using passwd root command
My Lucid LTS Ubuntu Studio 64 (amd) won't boot anymore; / and /home each are software raid 0 partitions.
I have a Multimedia partition (also ext 4) which I attempted to chmod with a GUI program (I forget what its called now) to enable all users read/write access. Looks like I inadvertantly fstabed that partition to be mounted at boot-time (normally my password was required in order to mount it).
I tried to logging out and back into my OS to see if the partition was now writable but it wasen't; instead a filesystem error was noted. I realised then that my partition was IMPROPERLY labelled and I was in a tired state and didn't remember how to rename it & rebooted to make sure all was ok. But it was not:
An error occured when mounting /media/Ubuntu unknown filesystem type "Multimedia" mountall: mount /media/Ubuntu [1334] terminated with status 32 mountall: filesystem could not be mounted /media/Ubuntu Boot: recovering journal
From my generic Ubuntu system on a non raid partition, I finally removed the space in the 'offending' partition: Ubuntu Multimedia to UbuntuMultimedia. And I changed the permissions for it. But if I try to boot Ubuntu Studio via recovery; booting in low res is unusable, and it gets stuck if I SKIP mounting. So I am left with manual boot or drop to a shell. I will have to use an editor like vi or nano and the command prompt. I know that I likely only have to comment out a line in /etc/fstab but I am only familiar with nautilus or gedit for this type of operation. And since this OS is on a raid partition its not 'seen' on the live CD..I would need someone to offer me clear steps to follow with the non gui editors otherwise I'm in trouble... I just wanted to use that partition for video editing and now I am locked out of my system!
In the ubuntu series I find my hard disk description as this: /dev/sda. As we know in slackware (10.1) for partitioning we either use 'fdisk' or 'cfdisk' when I use fdisk, like mentioned: fdisk /dev/sda. It says disk cannot be found.... or something like that. I think I know why?
You see my hard disk has the D: E: F: as extended partitions comprising logical drives and only my C: drive is pure primary. Does this have any connection with my problem? As from my explanation you can find that I'm a total wreck with computers.. but I'm very thrilled to learn linux. The reason why I need slax is that I require a traditional root account.
Nothing happens when ordinary users plug in a USB thumb drive or insert a CD into CDROM drive. Works fine for root. After root mounts the drives then all users can use them. How can I enable mounting/unmounting by all users?
My Lucid LTS Ubuntu Studio 64 (amd) won't boot anymore; / and /home each are software raid 0 partitions.
I have a Multimedia partition (also ext 4) which I attempted to chmod with a GUI program (I forget what its called now) to enable all users read/write access. Looks like I inadvertently fstabed that partition to be mounted at boot-time (normally my password was required in order to mount it).
I tried to logging out and back into my OS to see if the partition was now writable but it wasen't; instead a filesystem error was noted. I realised then that my partition was IMPROPERLY labelled and I was in a tired state and didn't remember how to rename it & rebooted to make sure all was ok. But it was not:
An error occured when mounting /media/Ubuntu unknown filesystem type "Multimedia"
Boot: recovering journal
From my generic Ubuntu system on a non raid partition, I finally removed the space in the 'offending' partition: Ubuntu Multimedia to UbuntuMultimedia. And I changed the permissions for it.
But if I try to boot Ubuntu Studio via recovery; booting in low res is unusable, and it gets stuck if I SKIP mounting. So I am left with manual boot or drop to a shell. I will have to use an editor like vi or nano and the command prompt. I know that I likely only have to comment out a line in etc/fstab but I am only familiar with nautilus or gedit for this type of operation. And since this OS is on a raid partition its not 'seen' on the live CD....
I would need someone to offer me clear steps to follow with the non gui editors otherwise I'm in trouble...
I just wanted to use that partition for video editing and now I am locked out of my system!
I have downloaded a package when i have logged in with a user that is not root. I download the package and it is under the folder "Downloads". When i try to unzip the package it sägs that the user does not have the priveliges to run the command. When i change to the root with the command "su -" i cannot see the package to unzip it from the root user prompt. What shuold i do?
I am having trouble with flash player. Well first I had some trouble with my router and rebooted linux. Then, flash wouldn't play sound anymore. I updated flash etc but still no sound. Then I tried as root administrator and flash sound works fine there.
So I checked the sound preferences from the Control Center and found out, all output devices are set to autodetect instead to one of the output devices I have. But when I switched to the user account to change the preferences accordingly, no sound was played at all.. Also, when I want to use the loudspeaker icon at the bottom to reach the volume control in the user account, I get an error message stating there was some connection refused.
I'm running 10.10 64-bit and have configured it for root graphical login for administration of the system. When I log in as root, I can run all menu items in System -> Administration with the exception of Users and Groups. When I try running this, the application starts, but I only get an animated spinning disk that doesn't stop, can't modify the users properties and I can't close the application unless I go to System -> Administration -> System Monitor -> Processes tab , highlight users-admin and click End Process.
Feb 10 (today) user qt4 extracts from cd /var/log/secure grep -i 'feb 10' secure Something wrong with pam or selinux? I have not fooled with pam or selinux in decades The secure file seems to report problems I do regular yum update s from secure: above
secure:Feb 10 08:00:20 localhost pam: gdm-password[2396]: pam_unix(gdm-passwordession): session opened for user qt4 by (uid=0) secure:Feb 10 08:00:48 localhost polkitd(authority=local): Unregistered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session1 (system bus name :1.37, object path /org/gnome/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
[code]....
I can login to qt4 from another user via "su - qt4" I would be shot if I inserted the inserted secure file
