Debian :: K10temp Module For Lm-sensors?
Jan 6, 2011
After I ran sensors-detect, it said that İ needed k10temp module to be compiled, so I searched some forums and got required stuff. However, before compiling it, I added the gnome applet for sensors to the panel, and surprisingly it shows the cpu and motherboard temperatures. How reliable it is? Do I still need to compile k10temp? (I will compile it since I don't want to use a kernel from experimental repo).My kernel is 2.6.32-5-amd64, TestingCPU: AMD Phenom 2 x4 955 BE
View 2 Replies
ADVERTISEMENT
Jul 10, 2010
I am trying to install the k10temp driver for sensors in order to get temps off my cpu. I found this but I dont know what to do with the makefile.
View 2 Replies
View Related
Mar 3, 2011
I can't for the life of me get the xsensors to work. I installed lm-sensors, the applet and also xsensors.I followed everything on this guide:URl... Went through it more than twice and a couple of restarts. I just can't figure out what's wrong.When I run "sensors" nothing is found. I ran the sensors configuration and it only found one device to add to /etc/modules. Please see the trace below, I would be very grateful if you can help me find the fix for this! The desktop is an HP Pavilion a730n with a Pentium4 processor.
View 3 Replies
View Related
Jun 21, 2010
I would like to use lm-sensors with my new PC.With my old one lm-sensors showed all sensors of CPU, GPU, wattage and Fan.With the new AMD64 (kernel 2.6.32-5 on Debian Squeeze) I get only the temperature of the GPU and the HDD.The only found sensor is "Fintek F71882FG/F71883FG Super IO Sensors"No embedded "AMD [...] thermal sensors" found in sensors-detect How can I fix it?sensors-detect
Code:
#
# sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
[code]...
View 3 Replies
View Related
Mar 23, 2010
I have an issue with IBM XSeries 236M rack server running Debian Squeeze (2.6.32-3-vserver-amd64). I have installed "lm-sensors", "fancontrol", "acpid" and "acpi-support-base" packages. The problem is that I cannot get fan voltage and RPM displayed.
Command "sensors" will only display core temperatures:
root@xseries:/home/yang# sensors
k8temp-pci-00c3
[code].....
View 3 Replies
View Related
Oct 13, 2010
I'm struggling to get my Conky feed to show the CPU temperature. I'm working with a fresh install of Ubuntu 10.10. Currently my Conky display shows a CPU temperature of 0 degrees Celsius, and I know this isn't true because I built the computer myself and I'm definitely not that good! Also, the GNOME hardware applet contradicts this and gives a more realistic CPU temperature of 33 degrees Celsius. What I can do to rectify this and get this displayed in my Conky?
The science bit:
I have done a sudo-sensors detect, and for CPU sensors it tells me:
Code:
Some south bridges, CPUs or memory controllers contain embedded sensors.
Do you want to scan for them? This is totally safe. (YES/no): y
Silicon Integrated Systems SIS5595... No
VIA VT82C686 Integrated Sensors... No
VIA VT8231 Integrated Sensors... No
AMD K8 thermal sensors... No
AMD Family 10h thermal sensors... Success!
(driver `k10temp')
AMD Family 11h thermal sensors... No
Intel Core family thermal sensor... No
Intel Atom thermal sensor... No
Intel AMB FB-DIMM thermal sensor... No
VIA C7 thermal sensor... No
VIA Nano thermal sensor... No
The end summary is as follows:
Code:
Now follows a summary of the probes I have just done.
Just press ENTER to continue:
Driver `k10temp' (autoloaded):
* Chip `AMD Family 10h thermal sensors' (confidence: 9)
and here is the relevant snippet of my conkymain file:
Code:
${color purple}CPU ${hr 4}$color
${freq}MHz Load: ${loadavg} Temp: ${acpitemp}
$cpubar
${cpugraph 000000 ffffff}
View 9 Replies
View Related
Jun 3, 2010
I have Debian Squeeze with Gnome "sensors-applet" installed.I have a Nvidia 7300GT GPU whose Thermal Monitoring(Temperature) is Shown fine on "nvidia-settings" GUI. But ,Sensors Applet in Debian shows only CPU temp and if I install hddtemp,it will show hard disk temperatures.
I ended up rebuilding the package from debian source enabling nvidia support.and it worked(with "DEB_BUILD_OPTIONS="--enable-gui --with-nvidia" Has Any Work Around to show nvidia GPU temperature without rebuilding the package ?PS:Below is a screenshot of nvidia GPU temperature showing in the top panel(of Gnome). sensors-applet_nvidia.png (5.5 KiB) Viewed 518 times
View 1 Replies
View Related
Aug 4, 2011
Having installed the 2.6.32 backport for Lenny, I have suddenly noticed that my Gkrellm doesn't display CPU and MB temperature anymore. Also, the smart sensors are inaccessible. Smartctl cannot access the readings even when run manually in a root terminal. I tried reinstalling lm-sensors and running sensor-detect again but it didn't help. What else needs to be updated to let the backported kernel see the hardware sensors?
View 4 Replies
View Related
Nov 19, 2015
I recently assembled a Dell T5400 workstation. I'm getting some strange issues with this machine concerning fan controller.
-Only 2/4 motherboard fans are detected. All fans have RPM signal
-The only sensors that are reporting temperatures are for the memory modules,graphic card and disk but not from my Intel CPU's. This chip reports memory module temperatures as they tend to get pretty hot (DDR2-FBDIMM).
-Every time a fan speed gets reported with sensors command the bus freezes for a moment. Videos playback and audio chops for a moment and continue normally.
After removing module dell_smm_hwmon the sensors command executed without interrupting multimedia flow but no fan speeds were reported also.
As a temp solution I blacklisted the dell_smm_hwmon module and I solved the high fan noise problems and the bus freeze.
As it turns out i8k module for fan control is very buggy for some DELL models. Can I manually configure it somehow to work?
So to sum up the problems my problems are:
No CPU temperatures reporting. 2 Fans Speed and PWM controller info missing, and freezing the bus when probing to get speeds from those identified (dell_smm_hwmon module issues).
The object is to get fancontrol working in my setup.
I run debian testing with kernel 4.2.0-1-amd64.
View 0 Replies
View Related
Aug 7, 2011
LM-Sensors can't seem to pull any info on the temp sensors for my new MSI H61M-P21(B3) mobo. Is MSI just not Linux friendly? Or could it possibly be that there really are no temp sensors on this board? I must be missing something simple here
View 9 Replies
View Related
Mar 17, 2010
I just recently changed my motherboard, and now the command "sensors" shows "no sensors detected" I ran sensors-detect but still i get no sensors detected.
View 9 Replies
View Related
Feb 23, 2010
I just got a dell studio 1557 with core i7 processor. I have heard they run warm and suspect this one is no exception but am having a hard time monitoring the temps. When doing acpi -V i can see 2 thermal zones (0,1) with the first being 63C and the second always staying 26.8C. When I am doing a lot of processing the first thermal zone jumps up quickly. First, should that be the processor temp? Secondly, any way to get more accurate readings with lm-sensors(sensors-detect can find no monitoring items).
View 5 Replies
View Related
Mar 3, 2011
I am trying to install a Sunix 4018T dual parallel port card on a pc with Mandriva Linux 2010.1: Dealer told me that linux has driver for this card already so I inserted it and turned on my pc. Unfortunately when I try to install my Okidata ML320, cups it's not showing any parallel ports. I try to update all the system with last patches and packages :I tested the card on a pc with windows xp, installed my printer and it works perfectly.
View 3 Replies
View Related
Jun 1, 2009
When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
View 3 Replies
View Related
Jan 28, 2010
I'm trying to enable the rewrite module in apache, to enabled the module I followed the last entry in the fist page this thread:[URL]...When I restart the apache all works fine, so I supose it's enabled
Now I create .htaccess in my apache folder (/home/user/apache), and I write this:
Code:
RewriteEngine On
RewriteRule ^link([^/]*).html$ test.php?link=$1 [L]
And I try to execute this: ./.htaccess, I have this mistakes:
Code:
./.htaccess: 1: RewriteEngine: not found
./.htaccess: 2: Syntax error: "(" unexpected
What are I doing wrong?
View 1 Replies
View Related
Jun 8, 2010
Code:
nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent
/usr/lib/python2.6/dist-packages/BitTorrent/Storage.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha
These errors occurred during execution:
[09:37:48] IOError - [Errno 5] Input/output error
Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.
View 2 Replies
View Related
Feb 5, 2010
I have installed gspca module in this way:
apt-get install build-essential linux-headers-$(uname -r)
apt-get install gspca-source
cd /usr/src
[code]...
View 1 Replies
View Related
Apr 22, 2010
I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies
View Related
Jul 25, 2010
I'm fairly new to Debian, but during the past I've used Mandrake, Slackware and Ubuntu. Few months ago I've migrated from Ubuntu to Debian - I like it a lot but there is one thing which keeps bugging me.Sometimes - one of the few boots - nvidia module won't load and GDM won't start. During the "bad" boot system freezes for a while after the message "PME# disabled" and gives the message about nvidia GPU not supported. Because of that GDM fails to start.Below are the boot logs (without the leading time for easy diff comparison) - the "bad log" when nvidia fails to load and the "good log" when everything is OK. Any help?
View 14 Replies
View Related
Jul 9, 2015
I recently bought an AMD R7 360 videocard and I'd like to use the free Radeon driver.
Problem is, PCI-ID 0x665f is not present in Jessie's 3.16 kernel sources. The hardware however is supported, it's just not recognized. So I'll have to get the Debain sources and patch include/drm/drm_pciids.h
From the 4.1rc1 kernel I know what to patch and where.
Debian page that explains how to use the Debian build system for recompiling the current kernel from Debian packages?
View 6 Replies
View Related
Jun 1, 2011
I try to install the last evtouch-0.8.8.tar.gz driver from:
[URL]
on my squeeze an get this problem:
Code:
# tar xvfz evtouch-0.8.8.tar.gz
# cd evtouch-0.8.8
# ./autogen.sh --prefix=/usr/lib/xorg
autoreconf2.50: Entering directory `.'
[Code]....
View 2 Replies
View Related
Jan 25, 2011
Just installed squeeze from previous Lenny and am having problems. With Lenny, for the tv card, needed: the modudule saa7134 card=54 tuner=78, i.e. had to give it the card= tuner= stuff - it could not autodetect that bit. Squeeze appears the same:
Code:
[ 5.055340] saa7133[0]: subsystem: 17de:7253, board: UNKNOWN/GENERIC [card=0,autodetected]
So, question, how do I give it the module options? - the problem is 'modconf' will not unload the saa7134 module because it says it is in use, even though the TV is not being used. And # modprobe saa7134 card=54 tuner=78 does not appear to do anything - it does not say anything but nothing shows on dmesg. Here is how tvtime, a fairly fool proof tv player, behaves:
Code:
root@fido:/home/lugo# tvtime
Running tvtime 1.0.2.
Reading configuration from /etc/tvtime/tvtime.xml
Reading configuration from /root/.tvtime/tvtime.xml
mixer: Can't open device /dev/mixer, mixer volume and mute unavailable.
[Code]...
View 2 Replies
View Related
Jan 30, 2011
I need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
View 3 Replies
View Related
Jun 7, 2010
my wireless doggle is not suppoerted out of box on squeeze.It's based on zd1211rw,just lack the vendor and product id.how can I hack the source and rebuild the driver module?
View 1 Replies
View Related
Jun 23, 2015
I'vd a problem with loading modules. Booting gives the this error:
Code: Select alllucas@debian8-1:~$ systemctl --failed
UNIT LOAD ACTIVE SUB DESCRIPTION
● systemd-modules-load.service loaded failed failed Load Kernel Modules
LOAD = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB = The low-level unit activation state, values depend on unit type.
[Code] ....
Always the same error when booting. After a period of time, (Graphical User Interface) the mouse click no longer operates, also text input isn't possible.
I had no access to the system at all, even crt alt F1 stopped working, also text input was no't possible. so reinstall was the only option. Maybe there is a connection with this two errors.
I've reinstalled Debian 8 several times. Still, both errors stay.
The same happend again (in the GUI) is nothing possible, no txt input, no mouse click), but now I have access to the system, ctr/alt F1 is working.
View 12 Replies
View Related
Sep 25, 2015
I'm having problems to compile XIllybus kernel module. As this guide explains, [URL] ..... (on the top of page 8 of 25) I unpackaged the tar.gz file and compiled the kernel module by typing the make command in the proper path. When I compile the module with make command, I get the following error:
make -C /lib/modules/3.16.0-0.bpo.4-amd64/build SUBDIRS=/home/xillybus/module modules
make: *** /lib/modules/3.16.0-0.bpo.4-amd64/build: No such file or directory. Stop.
make: *** [default] Error 2
/lib/modules/3.16.0-0.bpo.4-amd64/build path does not exist. What does it mean? Should I have to install some kernel packet? www does not work for me.
View 3 Replies
View Related
Sep 26, 2015
I've installed Debian 8.0 Netinst ISO on my old Ubuntu 8.04 Desktop to upgrade it for banking access requirements. I've installed the 32 Bit Jessie (Debian 8.x) and I am trying to get GWintree installed from the .deb file on the Internet. It was missing libtiff4, and I contacted the author about the missing lib. He rebuilt GWintree for Ubuntu 14.04, and uploaded the new .deb file. Now, when I try to install the deb with gdebi, I get another missing lib named libjpeg8, which is a runtime module. libjpeg8 is not available in Jessie, but is available
in Stretch (unstable) & also SID.
Is it possible to change my repositories, and add just the libjpeg8 module and get GWintree installed. That assumes there aren't other missing libs as well. If not, what is the best way to get libjpeg8 backported to Jessie? Who does this type building? GWintree worked well in Squeeze & Wheezy! I hope I can get it working in Jessie.
View 2 Replies
View Related
May 17, 2011
I'm trying to create an xorg.conf file. I've used Xorg :1 -configure and Xorg -configure in the console but i keep on getting the same error message.
FATAL: Module fbcon not found. Number of created screens does not match the number of detected devices. Configuration failed.
View 7 Replies
View Related
Dec 16, 2015
I have recently rented a VPS server so I can run a VPN. Unfortunately, I did not get far in this [URL] ....., I have encountered this error:
Code: Select allxaver@xaver:/$ sudo modprobe tun
ERROR: could not insert 'tun': Unknown symbol in module, or unknown parameter (see dmesg)
So I googled this error and found this: [URL] ....., however response of mine VPS was:
Code: Select allxaver@xaver:/$ ls /lib/modules/uname -r /kernel/drivers/net/tun.*
ls: cannot access /lib/modules/uname: No such file or directory
ls: cannot access /kernel/drivers/net/tun.*: No such file or directory
Code: Select allxaver@xaver:/$ lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 7.9 (wheezy)
Release: 7.9
Codename: wheezy
xaver@xaver:/$ uname -a
Linux xaver 3.2.0-4-amd64 #1 SMP Debian 3.2.57-3+deb7u1 x86_64 GNU/Linux
View 2 Replies
View Related
Jun 16, 2010
I am on squeeze with kernel 2.6.32-3-amd64 and I have installed nvidia driver :cat /proc/driver/nvidia/version NVRM version: NVIDIA UNIX x86_64 Kernel Module 190.53 Wed Dec 9 15:29:46 PST 2009 GCC version: gcc version 4.3.4 (Debian 4.3.4-8)
View 1 Replies
View Related
