Debian :: Compile Clanbomber In Squeeze But Get The Following Error Message When Running ./configure?

Dec 4, 2010

I am trying to compile Clanbomber in Squeeze but I get the following error message when running ./configure:

checking for DirectFB... found
checking for FusionSound... configure: error:
*** FusionSound 1.0.0 or newer is required. The latest

[code]...

View 4 Replies


ADVERTISEMENT

General :: Lame Compile - Failed Running ./configure - Error

Aug 1, 2010

I tried to install lame on Linux, but I failed running ./configure.

View 9 Replies View Related

Debian :: Bar 6 Error Message On Squeeze

Feb 13, 2011

I just got Squeeze loaded on computer and getting several error message during boot up. Something about 368623 and 368761 PCI Bar 6 collision. This is a first for me on Debian OS. It happens so fast I can barely write it down. Is there a log I can access to see the entire entry?

View 14 Replies View Related

Debian :: Compile Wheezy's 2.6.38 Kernel On Squeeze?

Apr 16, 2011

I'm trying to compile the 2.6.38 kernel (from the Wheezy sources) on my Squeeze laptop and get the following error: "dpkg-buildpackage: error: debian/rules build gave error exit status 2" After doing apt-get build-dep linux-image-2.6.38-2-amd64 and apt-get source linux-image-2.6.38-2-amd64 I did dpkg-buildpackeg and here is what happened:

[Code]...

View 2 Replies View Related

Ubuntu :: Cannot Compile OpenACN On Debian Squeeze

Mar 18, 2010

I cant compile OpenACN on Debian Squeeze, I've followed this guide: [URL] When I'm trying to build OpenACS with the command "ant" it results in this:

Code:
[...]
[javac] location: class org.openacs.utils.Jms
[javac] private QueueSession queuesession;
[javac] ^
[javac] /home/johan/openacs/acs-ejb/src/java/org/openacs/utils/Jms.java:35: package javax.jms does not exist
[javac] private javax.jms.Queue queue;
[Code].....

View 1 Replies View Related

Debian :: Failed To Compile Aget On Squeeze ?

Mar 23, 2011

I'm trying to compile aget in 0.4.1 on my debian squeeze 64-bit but it failed:

Code:

It seems that this tool was abandoned since 2009. If there's any alternative to an application that can download files from network by splitting the download like aget.

View 2 Replies View Related

Debian :: Using Squeeze AMD64 - Gngeo Compile Failed ?

Feb 5, 2011

I'm using Debian Squeeze AMD64 gngeo version 0.7

After i ran ./configure

I got these error messages when I ran make

Code:

View 9 Replies View Related

Debian :: Squeeze Notifications - Cannot Read The Message

May 26, 2011

There is a notifications-daemon, which shows sometimes infos like "5 updates, 5 security issues". It is represented by "i" in the system tray bar.Unfortunately, I cannot read the whole text of the messages there. I tried to click on it, right click, drag and what ever...Right now I have a line there "In order to complete this upgrade,...". And I cannot read it completely. How do I work with these notifications? Btw, KDE is running.

View 4 Replies View Related

General :: Error Message Of Configure File

Dec 1, 2010

When I am compiling from the src, I run the ./configure script. While there might be error sometimes, I 'd like to ask, what're the 3 stars( ***) in front of the msg stand for? Do they stand for critical errors?

View 9 Replies View Related

Debian :: How To Configure Info2www On Squeeze

May 5, 2011

How to configure info2www on Debian Squeeze (Debian Stable)?Used to be that I could use info2www straight out of the package, but not now.

View 2 Replies View Related

General :: Configure Apache To Show Error Message In Browser

Jan 31, 2011

How can I configure apache2 to show the error message in the browser? Just for the purposes of debugging, I do not want to have to open the server error log every time.

View 1 Replies View Related

Ubuntu :: Error Message When Running Apt-Get From Terminal

Jul 9, 2011

After a momentary power failure My server did not reboot due to a disk error. I rebooted and ran an disk repair and the machine booted fine. Now if I got to the update manager and try to update I get the following error:

E: Encountered a section with no Package: header
E: Problem with MergeList /var/lib/apt/lists/us.archive.ubuntu.com_ubuntu_dists_lucid-updates_main_binary-i386_Packages
E: The package lists or status file could not be parsed or opened.
E: _cache->open() failed, please report.

I checked the file location listed the file is there (hidden). Should it be a hidden file? If so how do I repair this error? I went to the preferences of update manager and changed the following, Updates every 2 days from weekly, Changed the server location from US server to main server. The update manager ran and updated 13 files. I don't know what change repaired my issue but a guess is, changing the download location from the US server to the Main server.

View 5 Replies View Related

Debian :: Squeeze And ALSA - How To Configure Without Alsaconf

May 13, 2010

As alsaconf as been removed from alsa-utils in Squeeze, how to configure ALSA ?

Which replacement for alsaconf ?

Debian is squeeze.
Package alsa-utils v1.0.22-1
Currently alsamixer is running fine for setup but i.e. speaker-test produce no sound.
Previous Lenny installation was working once alsaconf ran.

View 2 Replies View Related

Fedora :: Why Getting Error Message When Running Gconf-cleaner

Aug 3, 2010

I get this : Code: [root@Fedora philip]# gedit (gedit:3132): EggSMClient-WARNING **: Failed to connect to the session manager: None of the authentication protocols specified are supported

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.)

GConf Error: Failed to contact configuration server; some possible causes are that you need to enable TCP/IP networking for ORBit, or you have stale NFS locks due to a system crash. See [URL] for information. (Details - 1: Failed to get connection to session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.) I now tested it being not root and it's ok:

Code:
[philip@Fedora ~]$ gedit
[philip@Fedora ~]$

No error when I'm not root. So it's only when I become root and run gedit in terminal I get errors, why?

View 4 Replies View Related

Software :: Warning Message Or Error When Running Gedit

Dec 28, 2010

Why is it when I run gedit, there are always tonnes of error or warning messages? (Even though my gedit ran successfully)

To name a few:
1. GConf error: failed to contact configuration server; some possible causes are that you ned to enable TCP/IP networking for 0 RBit, or you have stale NFS lockes due to a system crash.
2. Failed to get connection to session: Did not receive a reply among others.

Just to mention again my gedit is running fine though. Is there any configuration that I missed out? or I can disable to avoid these nuisance?

View 1 Replies View Related

Multimedia :: Configure A Serial Mouse On Debian Squeeze?

Mar 3, 2010

I have a very old Pentium 3 that don`t have USB or PS2 suport.
I need to configure a serial mouse.
I did it on debian etch editing xorg.conf. I chage the mouse protocol to "Microsoft" and it works normaly.
But on squeeze it does not exist!

How can I configure it?

View 13 Replies View Related

Debian :: Configure Squeeze To Use Lost SWAP Partition

Jan 23, 2011

During the second OS (CentOS) setup, the shared SWAP partition was formatted and now I get the following under Debian:
Code:
# free
total used free shared buffers cached
Mem: 507524 251436 256088 0 11488 78332
-/+ buffers/cache: 161616 345908
Swap: 0 0 0
How to configure Squeeze to use again this SWAP partition?

View 5 Replies View Related

Debian :: Compile XMMS - Navigated To Folder Containing The Extracted Source And Ran ./configure - Failed

May 29, 2010

I'm trying to do the simplest thing. Compile XMMS. I navigated to the folder containing the extracted source and ran ./configure. That failed, so I remembered to install the build-essential package.

After that, I continued and got this output:

It said I didn't have glib installed, whatever that is. I did "apt-get install glib" and it told me it couldn't find the package called "glib". I thought, "Yeah, that seems a little too broad of a package name".

So then I went to Synaptic and did a search for "libglib" and noticed I already have libglib2.0-0 installed, as well as libglib2.0-data and libglib-perl.

How can I get this to to work correctly? I know the process should be ./configure, make, and then make-all, but I get stuck on the ./configure step.

View 14 Replies View Related

Debian :: PS3 Running An .img Of Squeeze - Out Of Space

Feb 10, 2011

If you haven't heard, PS3's on custom firmware have access to a linux install of sorts.

The OS is running from an .img of a Debian squeeze install.

My problem is that installing anything makes it run out of space. (It's only a 1Gig image)

I have searched and found some info, but it doesn't seem to work.

Make sure you have loop module on your linux.

Now you can copy the linux.img to your root of usb stick...

AND...

Mount first the original 1gb linux.img and then copy it to somewhere and then create an bigger image and copy to the new image.

mount:

And then follow the how to above. i think you should copy the folder with rsync because cp command will damage folder permissions!

View 1 Replies View Related

Debian :: Deb Squeeze Running From USB-stick

Mar 8, 2011

I want to get a running Squeeze onto a bootable USB-stick to test it, to make desirable adaptions and adoptions and only when I feel, that everything is okay, install that over my existing Deb-installation.

The DVD however offers only an "install" over an existing Linux-system, destroying that. Really hours and hours of Google aso. brought no solution to a - in my opinion - simple task.

I want to transfer the content of the DVD onto the USB-stick, make that stick bootable and THEN enable me to act like the system on the stick were my real OS, including of course making changes to the configurations. Only when I'm satisfied with the result, I then want to overwrite my existing system.

View 2 Replies View Related

Debian :: Members Running Squeeze Or Sid ?

Jan 2, 2010

I got Squeeze installed to a partition and it runs pretty good

cept for one thing

live-helper/live-magic is broken in squeeze?

if I do

Code:

in term I get not found,etc

live-magic also conks out saying lh_config no such file,etc

So, my questions are

1) anyone running squeeze and use live-magic,etc is it broken?

2) thinking about upgrading to Sid anyone run Sid here and what advice?

View 9 Replies View Related

General :: Gotten An Error Message To Please Check That The Dcopserver Program Is Running?

Oct 31, 2010

I have gotten an error message to please check that the dcopserver program is running.Where do I look to see if it is running?

View 3 Replies View Related

Debian :: Configure A Squeeze Client To Get Active Directory Ready?

Mar 18, 2011

Howto prepare, configure a Squeeze client to get Active Directory Ready?

View 2 Replies View Related

Debian :: Squeeze: Errors Running Upgrade

Nov 20, 2010

I've just tried running an upgrade and I'm getting lots of errors. Anyone having the same problem or know a fix/workaround

View 3 Replies View Related

Debian Multimedia :: Running Squeeze - Give KDE A Try?

Jul 28, 2010

For many years I used KDE and loved it. After Ubuntu appeared and got popular I decided to give Gnome a try as I figured that it must be OK if they used it in Ubuntu (and selected as the default desktop in Debian). I missed out on all the wailing and gnashing that accompanied the release of early versions of KDE 4. I've been using Gnome ever since and I have a really nice setup on squeeze - Chrome for browsing, Geany for development, Gnote for notes, Evolution for offline Gmail and Google calendars.

In fact, it's probably because Gnome is working so well for me right now that the geek in me fancies having a bit of a tinker with KDE. I keep reading that version 4 has now matured enough for production use. The only thing that puts me off is the sheer number of packages I need to install. I'm going to end up with a right mess in my menus etc, but still it might be worth it. What do you reckon - should I just stick with my nice Gnome desktop or should I dip my toe back into KDE? (or go for l33t status and install Xfce) I've got a thinkpad T400 with integrated intel graphics.

View 14 Replies View Related

Debian :: Get Ssh Access To Home PC Which Is Running Squeeze?

Feb 15, 2011

what would be the best way to get ssh access to my home PC which is running Squeeze? I could think of openvpn...and I have a vps ready at my disposal.

View 8 Replies View Related

Debian :: Running KDE 4.x From Squeeze - Manual Install

Apr 21, 2011

I have recently installed Debian Squeeze on my main machine at home. I used the default installation options, which meant gnome was installed as the display manager/GUI. Once I got the system up and running, I have attempted to install the latest KDE display manager/GUI. I executed the following commands:

$sudo apt-get install kde4

and then responded as required when asked if I really wanted to get and install the huge list of programs this involved.

When booting up in runlevel 3, I would log in, and then execute the following command:

$ sudo kdm

the screen would go blank and I would eventually get a KDE error message saying:

"Cannot open theme file @@@ToBeReplacedByDesktopBase@@@"

I would then be given only the option to press OK, which would dump me back out to the command line. I can get the GUI to start by executing "Startx", which doesn't require sudo to run I might add. The problem is that this command starts gnome. I would like to start X from the command line, but be given a choice of either GNOME or KDE.

Question 1: How do I fix the issue which generates the error message detailed above?

Question 2: How do I set up X to ask me which display manager I would like to use? and

Question 3: Am I correct in assuming that KDM shouldn't require sudo to run? If so, how do I adjust the situation so that it is correctly configured to run like gnome (without requiring root access to run)?

View 5 Replies View Related

Ubuntu :: Running A Mentor Graphics Tool Which Used Java-jre - Error Message

Mar 28, 2010

I am running a mentor graphics tool which used java-jre. Every time I try to invoke the tool I get the following error message

From the error message I thought gcc_4.2.0 is not installed in my system. I went to synaptic package manager and installed gcc_4.2, but I still get this error.

View 2 Replies View Related

Debian :: Debian Squeeze - Apt-get Running By Itself In The Background

Nov 15, 2010

I am running Debian Squeeze, apt-get update runs by itself in the background, taking up 100% of one of the two processor cores.

I have kept the system updated.

Heres the output of

Code:

Code:

I have noticed this a couple of times now, i can kill the process and it doesn't show up again ( i haven't noticed it showing up till next reboot).

I don't have update manager to set to automatically install anything, I have set it to "Only notify about available updates".

View 9 Replies View Related

Debian Configuration :: Squeeze New Installation / Cpu Running At 100% (even In Idle)

Apr 20, 2011

i've just installed squeeze on my lenovo t61 laptop. i've noticed one of my cpu's running at 100% (even in idle) from time to time.

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved