Debian :: "autoremove" When Switch From Squeeze To Testing?
Apr 20, 2011
I have just installed squeeze and I changed my source.list from squeeze to testing then did dist-upgrade/upgrade.After using for a while, I notice that apt tells me there are many packages no longer requires, all of them are default packages in Debian GNOME. If I use 'apt-get autoremove', of course, I lose almost everything in my GNOME desktop.Why apt tells me those packages are no longer required? It's ok or something is broken in my system? I switched from stable repo to testing repo several times before, but this is the first time I face this problem
View 4 Replies
ADVERTISEMENT
Oct 1, 2010
I've been trying out a distribution based on Debian Squeeze, but what I'd really like to try is a minimal Debian distribution I can build from the ground up and customize as needed. I heard a lot of positive things about using netinst on machines that are usually hard to get regular installation disks to work on. Downloaded netinst for i386 this week from a link at [URL].. and attempted to install from scratch on my machine. I got past formatting my disk and was at the base install step. It keeps complaining about corrupt programs it can't install. I ran a check of the CD disk from the menu and it says there are no issues with the disk itself. I can see some basic directories and cdebootstrap installed on my hard disk. Would like to jump to installing kernel and grub or something and attempt to download some of the other programs later, but it won't let me bypass the step. Saw some articles about a Debian from Scratch project on the Internet, but doesn't look like it's active any more. What's the best way to get a minimal Debian distribution based on Squeeze installed to a hard drive? Should I just wait until the official release?
View 6 Replies
View Related
Apr 9, 2011
just installed testing on my netbook. my sources.list file all say wheezy. it was my impression that debian testings nickname was squeeze. are wheezy and squeeze the same thing?
View 14 Replies
View Related
Apr 13, 2011
Just switched from stable to testing. To run a pure testing, can someone tell me if I have all the necessary repos below?
deb http://www.debian-multimedia.org testing main non-free
deb http://getswiftfox.com/builds/debian unstable non-free
deb http://ftp.debian.org/debian testing main contrib non-free
deb http://security.debian.org/ testing/updates main contrib non-free
deb http://www.debian-multimedia.org testing main non-free
deb http://mozilla.debian.net/ squeeze-backports iceweasel-4.0
View 5 Replies
View Related
Feb 16, 2011
I'm wondering about this because I'm considering doing this myself. Specifically, I'd like to know if your wireless configurations survived the upgrade or not. Meaning, where they removed, altered, or hopefully, where they preserved as they where?
Also if anyone knows of a good link regarding this particular upgrade, by all means please share. I have only been able to dig up a bit of dirt on the topic but they were concerning older Debian releases. Maybe theres not much difference?
View 5 Replies
View Related
Feb 9, 2011
I have an older system that has been running testing for about 4 years. Originally I was running testing for several packages that were not yet available in stable. However, now that this system has a more crucial role in the network I have considered moving it to stable in hopes that it I can gain some insurance on it's uptime. It is important to note that I have never had a problem with the testing distribution and would be quite content to continue running it; I do want to know my options though.
I have not yet updated the system since the stable release of squeeze, I am considering to change my sources from testing to stable and just let apt take care of the rest. Anyone have any experience with such a thing? After searching Google I have found some solutions to force a downgrade, but that is really not what needs to be done here. I suppose I should have switched my sources to squeeze some time ago and this probably would have worked itself out.
A similar question is what happens a couple of years from now when another release happens. Have you had good luck updating from old stable to stable? I've run testing on several machines now for several years and have went through freezes and dist-upgrades several times with no major problems at all. Will I see the same stability if I move to the stable distribution?
View 1 Replies
View Related
May 16, 2010
so, if i change my repos from squeeze to testing and just keep updating after squeeze goes stable would i be asking for trouble?
i ask because when i dist-upgraded from lenny to squeeze i had some breakage - i figure if i just stay with testing i'm thinking it'll just update gradually.
View 8 Replies
View Related
Nov 4, 2010
I am still getting the error that no kernel modules are found when trying to load components from the CD on the multi-arch version of Squeeze. Are these even tested prior to releasing them? I mean I know it's testing but I thought we were reaching a release-date and the installer is 100% broken and has been for months. I have a pile of useless multi-arch CDs for Squeeze that won't install on 64bit or 32bit machines due to not finding the kernel modules. Can we get some testing on the installer portion of Squeeze?
View 3 Replies
View Related
Feb 9, 2011
I need to get [URL] (it's down now, the package is marked as "squeeze(testing)" into installed squeeze system.
What is the corresponding sources.list line for squeeze/testing? Without any results (apt-get update && apt-cache search log4c) tried those: [URL]
View 3 Replies
View Related
Jun 30, 2010
For anyone using Blueman with Testing (Squeeze), todays Python upgrade to version 2.6 stops it from working due to a Blueman bug. This has been fixed in blueman version 1.21-4, which you can install from SID if you don't want to wait the 10 days for the normal migration.
View 1 Replies
View Related
Dec 28, 2009
Anyone out there running Debian testing/squeeze?
Is Java running in your browsers properly? I just want to make sure I'm not alone. I'm sure a recent update caused the problem. A future update will probably fix it.
Java applets have stopped working on my main desktop and laptop. The server running stable/lenny works fine. Fedora and Ubuntu installed on the laptop also work fine.
Java applications such as JAlbum work without any problems.
Only Java applets in the browsers fail. Iceweasel, Epiphany, and Opera all fail.
It fails on my internal site.
I get the same error at Test Your Java Version And How do I test whether Java is working
But this one works.
View 11 Replies
View Related
May 22, 2010
Choising an hardware in LINUX is not easy since one has to check before whether it is supported. A large hardware base is supported , but not everything.
Which webcam is sponsored by DEBIAN TESTING that works surely with just a plug and play (skype / camorama...) ?
After a required:
Code:
View 4 Replies
View Related
Jan 29, 2011
Could someone give me the steps to installing/enabling the newest Flash 10 in Debian Testing/Squeeze?I want to install via the steps one would do from Adobe's website.IT DOES NOT WORK.IT DIDN'T WORK FOR ME.I just want to install the routine way that is usually done in Linux but when I downloaded it, I was asked to extract it and I have no idea where it got extracted to.Can anyone help?I don't mind starting from scratch.I don't remember how to do this method.I'm used to the 'non-free' package in the repo but Flash 10 is no longer working so I want to use the 'sure' method.
View 5 Replies
View Related
Apr 22, 2011
When updating from the last Debian Live image (Squeeze) to the current Debian testing, apt announces a lot of packages being not required:
The following packages were automatically installed and are no longer required:
openoffice.org-draw libpcsclite1 libwpd8c2a usb-modeswitch gtk2-engines-smooth dnsmasq-base tomboy
libmono-security2.0-cil libgsf-1-common update-notifier-common libndesk-dbus1.0-cil libmtp8 libmono-addins-gui0.2-cil
gnome-js-common pnm2ppa libavutil49 libhal-storage1 libmono-system2.0-cil update-notifier python-mako
openoffice.org-officebean openoffice.org-emailmerge network-manager-gnome openoffice.org-impress gdebi libgpod-common
[Code]...
These include some important packages, like network-manager-gnome for example. Was it really intended to be removed? Without it, it's impossible to manage network connections from Gnome (only manual option of editing interfaces config is left). Is it a bug, or some incomplete intention? apt suggests to autoremove these packages. Should they all be retained, or only some of them, or it's supposed to be none? Removing some of them makes sense for me (like Epiphany for example), but some not at all.
View 3 Replies
View Related
Apr 29, 2011
I'm running Lenny, and I've always used aptitude. The upgrade instructions on Debian's website say that apt-get is preferred for doing the upgrade to Squeeze, and also says that apt-get now provides equivalent functionality. So is there any reason to continue to use aptitude after upgrading to Squeeze, and if so, will there be any problems caused by having used apt-get for the upgrade? Or will there be problems caused by switching to apt-get after using aptitude before the upgrade?
View 7 Replies
View Related
Mar 24, 2010
The strangest thing happened. I installed Debian testing with the "squeeze Alpha1" netinstall cd. All seemed to go well and the installer made me pick a root password and create a normal user account. However, after the first boot my user account did not work and I could also not login as root, it looked liked I forgot the passwords for both accounts. When rebooted in recovery mode, I got Code: sulogin: root account is locked and I was automatically logged in as root without being asked for a password. Then I found out that the normal user account does not exist. I created a user acount and logged into it. I did passwd to set a password, but I got Code: passwd: Authentication token manipulation error Also, there was no home directory for the new user.
View 6 Replies
View Related
Jan 31, 2016
I recently upgraded my Debian box from Jessie to Stretch. After this, apt informed me that I should issue "apt-get autoremove," however the package list to be effected was large and contained some important packages (xorg being just one example). Most of the packages are qt4 related, and I at first assumed qt5 equivalents had replaced them, but seeing network-manager and xorg in the list made me pause.
View 1 Replies
View Related
Sep 26, 2010
I'd like to clean packages on my Lenny with Gnome using apt-get autoremove and I get this output:
Code:
# apt-get autoremove
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages were automatically installed and are no longer required:
bluez-gnome libsdl1.2debian libsdl1.2debian-alsa libepc-ui-1.0-1 python-gst0.10 libmtp7 gcalctool libpth20 gnome-nettool libepc-1.0-1 libgtk-vnc-1.0-0 libgksu1.2-0
python-notify aspell pkg-config libgda3-common python-gnome2-extras gucharmap libgksuui1.0-1 libosp5 evolution-exchange libspectre1 gnome-network-admin libsvga1
gnome-power-manager unzip gnome-cards-data totem-plugins gnome-screensaver rhythmbox w3c-dtd-xhtml python-gdata gedit liblircclient0 python-gtksourceview2 gtk2-engines-pixbuf
system-config-printer libpt-1.10.10-plugins-alsa gnome-themes seahorse libggzmod4 mysql-common totem-common vinagre swfdec-gnome libpt-1.10.10 libgpod3 libgadu3 libgalago3
guile-1.8-libs libmysqlclient15off python-gtkmozembed python-gtkhtml2 p7zip gedit-common gnome-themes-extras libhesiod0 finger libmusicbrainz4c2a fast-user-switch-applet arj
gnome-volume-manager gtk2-engines libgtksourceview2.0-common libkpathsea4 eog libgtksourceview2.0-0 libavahi-gobject0 gnome-backgrounds python-eggtrayicon python-sexy
python-xdg gnome-spell libggz2 vino evince gnome-app-install libopal-2.2 totem-gstreamer libgnomevfs2-bin zip python-gdbm gnome-core dmz-cursor-theme python-4suite-xml
liblua5.1-0 libmeanwhile1 libgda3-3 svgalibg1 libpt-1.10.10-plugins-v4l libgpgme11 libggzcore9 libgmyth0 gconf-editor libzephyr3 gnome-system-tools gnuchess
gstreamer0.10-gnomevfs libavahi-ui0 gstreamer0.10-tools totem-mozilla libgdl-1-0 file-roller libopenobex1 libspeexdsp1 libgdl-1-common gnome-vfs-obexftp
The following packages will be REMOVED:
arj aspell bluez-gnome dmz-cursor-theme eog evince evolution-exchange fast-user-switch-applet file-roller finger gcalctool gconf-editor gedit gedit-common gnome-app-install
gnome-backgrounds gnome-cards-data gnome-core gnome-nettool gnome-network-admin gnome-power-manager gnome-screensaver gnome-spell gnome-system-tools gnome-themes
gnome-themes-extras gnome-vfs-obexftp gnome-volume-manager gnuchess gstreamer0.10-gnomevfs gstreamer0.10-tools gtk2-engines gtk2-engines-pixbuf gucharmap guile-1.8-libs
libavahi-gobject0 libavahi-ui0 libepc-1.0-1 libepc-ui-1.0-1 libgadu3 libgalago3 libgda3-3 libgda3-common libgdl-1-0 libgdl-1-common libggz2 libggzcore9 libggzmod4 libgksu1.2-0
libgksuui1.0-1 libgmyth0 libgnomevfs2-bin libgpgme11 libgpod3 libgtk-vnc-1.0-0 libgtksourceview2.0-0 libgtksourceview2.0-common libhesiod0 libkpathsea4 liblircclient0
liblua5.1-0 libmeanwhile1 libmtp7 libmusicbrainz4c2a libmysqlclient15off libopal-2.2 libopenobex1 libosp5 libpt-1.10.10 libpt-1.10.10-plugins-alsa libpt-1.10.10-plugins-v4l
libpth20 libsdl1.2debian libsdl1.2debian-alsa libspectre1 libspeexdsp1 libsvga1 libzephyr3 mysql-common p7zip pkg-config python-4suite-xml python-eggtrayicon python-gdata
python-gdbm python-gnome2-extras python-gst0.10 python-gtkhtml2 python-gtkmozembed python-gtksourceview2 python-notify python-sexy python-xdg rhythmbox seahorse svgalibg1
swfdec-gnome system-config-printer totem-common totem-gstreamer totem-mozilla totem-plugins unzip vinagre vino w3c-dtd-xhtml zip
0 upgraded, 0 newly installed, 107 to remove and 0 not upgraded.
After this operation, 216MB disk space will be freed.
Do you want to continue [Y/n]?
Have you never get problems after apt-get autoremove?
View 3 Replies
View Related
May 7, 2010
What is the difference between Sid (unstable) and Squeeze (testing)?
Is it better to download Squeeze(testing) rather than Lenny(stable) because the software is more up to date?
Or would I want to get Sid? How unstable is it?
This is for a desktop by the way.
View 6 Replies
View Related
Jun 19, 2010
I recently installed virtual box on debian and after it had finished my terminal informed me that I could remove some "unnecessary" software by use of sudo apt-get autoremove. When I did this, some of the icons on the desktop changed and all of the icons in the drop down menu on the bar at the top of the screen also changed to ordinary folder symbols. The theme that I was using also went away. I restarted the computer and it booted back into a shell prompt with no GUI. I tried to get back to the GUI using alt+f7 but it didn't seem to exist
View 2 Replies
View Related
Apr 20, 2010
apt-get suggetsed I should remove some packages I was no longer using. I've read the threads that explain this, but unfortunately I did that just now, not when I actually ran the damn command. I must say, however, that there were lots of things I wasn't actually using, so it was useful in a way. But there is a problem:
I have a Dell Inspiron 1525 and to get my sound keys working (the mute, volume up and volume down keys) I had to go to Settings-->Regional & Accessibility-->Keyboard Layout and there in Keyboard model I chose the option Dell Laptop/Notebook Inspiron 6xxx/8xxx. I know that's not exactly my model, but that made my sound keys work fine. Well, since I did the autoremove thing, that stopped working. I haven't got a clue what library was being used to get the sound keys working.
View 3 Replies
View Related
Aug 17, 2010
I had installed Debian lenny just two dys back. i am using gnome-desktop. When using apt-get i tried apt-get autoremove and the result was that so many packages were removed for eg. nautilus, gnome-games, gnome-background etc. Then i tried to stop the process in between and installed the packages again (with apt-get install). Now after rebooting i am getting only the desktop without any icons and no commands are working. I can still go to single user mode. How can i get my desktop with all functions.
View 8 Replies
View Related
Sep 7, 2011
I've been using Debian for around ~3 months now, though before that a certain derivative thereof since the start of the year.Long story short is that I was installing packages, as you do, when apt-get prompted that I run apt-get autoremove, as it does. So, trusting the computer, I do, not bothering to read the chunk of packages that it recommends to remove. Life goes on, until a reboot reveals that there are issues.Short story shorter, a quick cat /var/log/dpkg.log | grep remove spits out the following:
root@kubrick:~# cat /var/log/dpkg.log | grep remove
2011-09-05 22:04:09 startup packages remove
2011-09-05 22:04:09 remove gnome-user-share 2.30.1-1 2.30.1-1
[code]....
View 8 Replies
View Related
Jun 19, 2010
I recently installed virtual box on debian and after it had finished my terminal informed me that I could remove some "unnecessary" software by use of sudo apt-get autoremove. When I did this, some of the icons on the desktop changed and all of the icons in the drop down menu on the bar at the top of the screen also changed to ordinary folder symbols. The theme that I was using also went away. I restarted the computer and it booted back into a shell prompt with no GUI. I tried to get back to the GUI using alt+f7 but it didn't seem to exist
View 1 Replies
View Related
Feb 28, 2009
I am a ubuntu user but I want to go to the next level to use debian because what I heard of it, but I get confused to what to install on my computer do I install debian testing or debain stable with testing repositories.
- I want to use this system to the home use only.
- I want to use the newest packages because the stable packages is too old to use.
- What about using more than one repository i.e stable with testing with unstable at the same time (the same sourcelist)
- Is the testing and unstable sid packages good enough for the home use?
View 5 Replies
View Related
Apr 10, 2011
I am still running the linux-image-2.6.32-5-686 kernel a computer with squeeze. I installed squeeze on it when it was unstable. I would like to bring up to the new stable state.Should I do apt-get install linux-image-2.6.32-5-686or should Iapt-get dist-upgrade
View 1 Replies
View Related
Jul 4, 2011
I tend to stay on for long time. My machine is a Fujitsu T4310 tablet. I have got all tablet features previously working properly when I was on Isadora Mint. After installing LMDE to my surprise basic features of the tablet simply worked out of the box but I'm missing a few important features like multitouch, screen rotate and buttons in tablet mode.
As far as my experience with Isadora, it needed a driver called "fjbtndrv", but I couldn't find it in the repos, moreover, I think it might need some tweeks to get it behaving properly. I found some refferences but it refers to other ubuntu based distros, which I can't use of course.
p.s. prefere a solution other than compiling it myself, it looks scary and has lots of dependencies.
View 14 Replies
View Related
Jan 4, 2010
I have an harddisk which is old, since many years >10 years, and I recall I crashed few clusters using windows programs which were old and harddisk stuffs doing. So the pc lives with bad clusters, this pc lives very well since many years.Question, the pc has woody debian, which let us to install and exclude bad sectors during install. Bad clusters was an usual thing in the past, but today not anymore.Unfortunately debian squeeze installer coders had the good idea to remove the " bad cluster checking " before installing debian, during install (cdrom netinst).
View 1 Replies
View Related
Nov 16, 2010
I'm a Debian testing user (not an experienced one) on laptop Dell Latitude D531 and has encountered a problem: I've often got my laptop slowed down very much and the message appears in a console: Disabling IRQ #19 I've searched for the solution, but failed finding the answer.
dmesg showed:
Code:
[ 21.064461] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 21.067790] cfg80211: Calling CRDA for country: GB
[ 21.160654] padlock: VIA PadLock not detected.
[ 23.545837] fuse init (API version 7.13)
[ 24.354533] tun: Universal TUN/TAP device driver, 1.6
[Code]...
View 6 Replies
View Related
Aug 12, 2011
I'm running Debian Testing and since some time ago I'm getting the following messages:Any ideas how to solve this warnings?
(gtk-update-icon-cache:9204): GdkPixbuf-WARNING **: Cannot open pixbuf loader module file '/usr/lib/x86_64-linux-gnu/gdk-pixbuf-2.0/2.10.0/loaders.cache': No such file or directory
Processing triggers for gconf2 ...
[code]....
View 5 Replies
View Related
