i did try to look for an open post for this, i found other items, but not exactly what i was looking for. i am not that o-fay with linux so you will have to bare with me.
firstly my disto.
Version: 2.30.2
Distributor: Debian
[code]....
I have 2 HDDs with Winblows and 1 HDD with Fedora 13. How to make Fedora 13 auto-mount on boot the Winblows partitions.
Here are the infos of the partitions:
Code:
I have a full working Mythbuntu 11.04 on a FakeRAID system (via ICH10R chipset). The OS is sitting on a 250GB partition and working fine. I am trying to get the 7.07TB partition mounted so that I can use it to store all my movies. When I mount it via the [URL] all works fine. When I reboot it cannot mount due to device being not ready or unavailable It appears the superblock goes missing at reboot. I have it formatted to ext4 with a GPT partition table. If I reformat and remount then all works fine again until I reboot.
[Code]...
When i double click the ntfs drives in "computer" it shows "Invalid mount option when attempting to mount the volume 'Vista'. "
View 12 Replies View RelatedI'm having a problem auto-mounting a new luks partition. I have crypttab and fstab entries. I already have my primary encrypted partition (root) mounting at boot (from the install), but after creating this one manually, it does not open on boot. It auto-mounts when I run the following command manually after boot: sudo luksOpen /dev/disk/by-uuid/<uuid> mycrypt
/etc/crypttab entry:
personalcrypt /dev/disk/by-uuid/a1af5b7b-db58-4690-b586-b74407795e2c none luks
/etc/fstab entry:
[code]...
Im trying to get my extra media drives to auto mount at boot, having problems with it. Does this line look right?
/dev/sdb /media auto auto,user,noexec,rw,sync 0 2
The one thing I'm not sure about is the mount point, am I just putting '/media' or am I putting '/media/MKV' or whatever the name of the drive may be?
I bought a new external HDD - a Seagate 2 TB (actually 1.8 TB) but am unable to mount it. The drive is USB 3.0 while the ports on my system are USB 2.0 but that is NOT the issue. I am able to see the HDD without an issue on the CLI. I am on Jessie 64-bit.
Code: Select all$ lsusb
Bus 005 Device 003: ID 0bc2:ab24 Seagate RSS LLC
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]....
My question is why it does not automount. Also if I should try to manually mount it, how should I go about it ?
I got the disks pre-formatted in around 500 GB (or as close to it) multiples as can be seen.
The other question is why does /dev/sdb4 show some different dialog than the rest ?
Nautilus mounts NTFS partitions when I acces them, and before mounting, it asks for root password. Is there a method to auto-mount ntfs partitions on Debian startup, without requiring root password each time they are automatically mounted ? And without installing additional packages.
View 3 Replies View RelatedSometimes when I plug in a USB flash drive, it is mounted to /dev/usb0 instead of /dev/drivename. This poses a problem for me because I have applications that depend on files I keep on flash drives, and having to frequently change the file paths is difficult. I haven't been able to find anything on this topic with a cursory search on Google or through the Debian reference. Heck, I don't even know what /dev/usb0 is (though I would like to learn, in the interest of being less of a noob). This is happening on a Squeeze system running Gnome, so I believe nautilus is what's responsible for auto-mounting my flash drives.
Beyond that, I don't know what other information I should provide; if you need to know something else, ask me (and perhaps tell me how to access that information). Someone on IRC suggested that I didn't have my drives set to mount in /dev/, but I have no idea how I would go about fixing that. If there's a configuration file that deals with this sort of thing, chances are I haven't touched it since installing this system. Debian installer sees usb drive as cd drive, so it adds it in fstab, but with wrong file system options (udf,iso9660) which is not the one your flash drive uses.
I have successfully mounted my Win7 volume and my external hard drives NTFS volume as well. However, after modifying the fstab I seem to only be getting the win7 volume to auto-mount. Below is the contents of my fstab. /dev/sdf3 is not mounting. Again, it works no problem if I manually mount it.
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
[code]....
I am struggling with getting an sshfs mount mounted on system boot. I have a script that mounts the sshfs for "userA". When userA runs the script all is well - user A can access the remote filesystem, root user can't see it as expected. The basic command is: sshfs userA@remote host:/home/userA /home/userA/mountdir -p 21212 -o password_stdin < passwordfile. I can prepend the sshfs command in the script with su - userA -c and when I run this script logged in as root all is well, userA has access and all is well. If I then put this script in /etc/init.d and reference it properly in the rc. directories the mount doesn't happen. If I prepend the sshfs command with sudo, same thing. Logged in as root I can run the script and UserA has access. Run the script in /etc/init.d during startup and the mount doesn't happen. Echoing text to a log file shows that the script is being executed but no mount happens.
View 4 Replies View RelatedI have servers installed with RHEL 4 2.6.9-89.0.9 ELsmp. I tried using uuid and label in /etc/fstab to automount usb drives to mountpoints that I specify after reboot. Unfortunately, it just does not work in all my RHEL4 servers. After every reboot, /etc/fstab will be automatically modified and all configurations related to my USB drives will be changed. Irregardless of whether i use UUID or LABEL in my /etc/fstab.However, it works on RHEL5. But, upgrading is not an option in my environment. I have been googling around looking for alternatives but everything seems to point back to using UUID or LABEL in /etc/fstab. Anyone has tried something that works? Please help me, thank you.
View 7 Replies View RelatedI am new to Debian and I have been trying to find a way to auto login to a users account upon Debian booting. Is there a way to auto login to the root account upon a Debian boot? Is it possible to do this with GNOME installed as well as Minimal?
View 1 Replies View RelatedI am having a strange issue with my xserver. I do have nvidia graphics. My system is Debian Squeeze with limited packages from Sid to fix issues when needed. Currently I don't think that there are any installed from Sid that have not since been updated through testing. It also contains one package from Lenny that does not exist in Testing for some reason, ogle the dvd player.
After an update the other week my gui failed to come up. That is not that unusual with nvidida. So I reinstalled the driver and all seemed to be fine until the next reboot some days later which failed. I reinstalled the driver again and all seemed fine.
The machine did not come out of hibernate cleanly some days later and upon reboot no gui
I have tried the whole group of driver packages out of sid, testing, stable. All are afflicted with the same problem. When the box drops back to the login if I login and issue from root '/etc/init.d/kdm stop' then '/etc/init.d/kdm start' the gui comes up just fine. It also seams to launch much faster than it has for some time.
A friend has questioned if kdm is starting to early in the launch process. I think he may be on to something. But looking at the files in /etc/rc*.d does not seem to indicate to me that is the case. kdm has the launch number 5.
The machine has been converted to the, what is it, multi-process launch thingy, quite some time ago now, like a year maybe? These are what is in the sequence from kdm on
Code:
The install is amd-64 using the standard debian kernel.
I am using Deluge on my Debian server, for a simple auto start at boot I us the following lines in the /etc/rc.localsudo -u User delugedsudo -u User deluge-webDeluge is running after boot but i wane check if its running with User account and not as root.So I did a ps -aux | grep deluge and notice a line that root is trying to run the command sudo -U User deluge-web (i think its trying).
User 1735 1.5 1.0 187680 21604 ? Sl 16:30 0:04 /usr/bin/python /usr/bin/deluged
root 1736 0.0 0.0 20924 1168 ? S 16:30 0:00 sudo -u User deluge-web
User 1737 1.5 1.1 70400 24084 ? S 16:30 0:04 /usr/bin/python /usr/bin/deluge-web
The question is what does this mean? can i leave it running, is it better to kill it if so how to prevent that it happen on start-up.
I have a debian 8.1.1 server running owncloud and a proxy server at home. I have everything working fine, with one exception. The proxy server won't start on boot. If I ssh into the server, then run "sockd -D" as root, it starts up and runs just fine. Any guides I find refer to the init.d script method that worked in Wheezy, but that isn't working. I think it has to do with Jessie switching to systemd? I had used someone elses script in init.d, and ran update-rc.d, but it still doesn't start.
With Jessie, how can I make "sockd -D" execute on system startup?
I'm not using one atm, tried "exec startxfce4" in my .xinitrc but didn't work.
System is Debian Stretch.
I press On-button, Debian boots, logs in and automatically connects to the Wireless network AND! to my local pc via LAN. It runs an ssh server, so I can ssh into debian over internet and communicate with the local pc (send a magic packet).Here are my problems:
1) I don't how to log in automatically. This and this doesn't work.
2) I need a network tool that can manage multiple connections and has a reconnect feature. With the default network manager I cannot even connect to more than one network simultaneously although I have two network devices of course.
And I guess I can run all that in console mode, right?
I upgrade my fedora 10 to fedora 11 without any issues but I noticed that now when I insert a dvd or cd it will not mount it automatically. Previously when I used fedora 10 it worked like a charm not it will not mount it. I just want when I insert cd or dvd my fedora to mount it automatically.
View 7 Replies View RelatedA windows server named SRV is sharing folders for each users in /share/From a Debian computer on network logged with the user session "foo" I can mount the remote directory /share/foo with:smbmount //SRV/share/$LOGNAME /remote_directorythen the prompt ask me for password and when I have gave it the remote directory is mounted correctly.Now I would like to make this at boot time.If I put the same command in the .bashrc, when I boot, the remote directory is not mounted when the session is opened but then if I open a console, it ask me for password and the directory is mounted.This way is not convenient and it would be better if the directory is mounted when the user open his session and using the same password.The point is that every user should have a his own remote directory mounted when the session is opened.
View 2 Replies View RelatedI currently mount my smb shares by adding the appropriate line to fstab. Now my son also uses my laptop (F13 by the way) and I would also like to automount the shares for him but as a different user because there are some directories he should not have access to.
View 1 Replies View RelatedIs there any way to specify what partitions of my USB Hard drive automount? There's really only one I want mounted automatically, and I've made three partitions. I'd like it so the one mounts, but the other 2 don't. Possible?
View 6 Replies View RelatedHow can I auto mount all my drive at start up, I want them to be auto mounted.
View 4 Replies View RelatedCan I auto-mount my storage HDD? If so how?
View 4 Replies View Relatedim currently useing kubunt 10.10 and i need help to have this drive automounted at bootfor all users./dev/sda1 1 14590 117185536 83 Linux
UUID: 32dc7bba-7605-4543-ab73-d8cbb16c0f76i have tested diffrent options but non work.before i could use psydm but that was for a ntfs drive for ext3 it dont work aswell.i find kubuntu @ ubuntu very userfriendly but when it comes to this part its not that goodfor users like me that not are so experienced with linux
current fstab
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc
[code]....
I recently formatted my memory stick in windows. It works properly in windows. I have a dual boot with ubuntu 10.04 and the usb automounts in read-only mode. I cannot write anything to the usb stick in ubuntu. sudo chomod does not work.
View 4 Replies View Relatedhow to set auto mount at startup. I have 3 partition how can i auto mount this partition at startup.
View 7 Replies View RelatedI'm running 64 bit Ubuntu, 11.04. When I first installed, I could plug in my USB thumb drive and it was automatically mounted for me. Lately, this no longer happens... I use the Disk Utility to mount it manually. What I did wrong to lose this automatic mounting?
View 9 Replies View RelatedI have a system that I want to auto mount a samba from another one. The issue is that they are both laptops so doing it by name is much much better than by ip. Unfortunately when I try to mount by name with this in my samba:
[code]...
it works fine. The ip obviously is going to change depending on what network the two systems are on.
i'm working with x86 small computer having 128 ram and 233MHz speed in processor nd i'm going to do a project which need auto mounting of a pen drive if you can post a url that I can download those OS.
View 5 Replies View Related