I have been encounter 2 bugs on 2 sides of the coin. Seems it doesn't fix since Wheezy till now.
1. When I don't install any nonfree firmware I'm stuck at 1024x768 resoultions unable to turn to 1366x768
2. But when I install nonfree firmware my 1366x768 was solved but I encounter other new bugs
>> On Jessie: XFCE4.10 doesn't save any wallpaper everytime when reboot the pc & always reset to default.
But when remove nonfree firmware the bg save normally but I've to stuck at 1024x768 resulotion.
This also happen on Wheezy as well.
>> On Stretch: XFCE4.12 workspace become too long ugly.
But when remove nonfree firmware the workspace become normal
but I've to stuck at 1024x768 resulotion once again.
So any way with nonfree installed without this XFCE bugs or without nonfree driver install but make resolution 1366x768 work for not to stuck in 1024x768 resolutions. Overall I'm quite satisfy Stretch testing than Jessie Stable.
I am attempting to use dual monitors in Fedora 14 using an AMD ATI Radeon HD 5700 Series graphics card (not that I think that has anything to do with anything, but who knows), and want it to where my second monitor is its own virtual workspace so that I can switch between my other workspaces on my original monitor without switching the workspace on the second monitor. This way, I can watch movies or what-not on my TV (2nd monitor) while working on my original monitor.The only thing I found that was even close was setting the 2nd monitor up on it's on x server, which I don't want to do. Also, as it is now, I have my panel on my original monitor, but the windows do not see it when I have it aligned on the right (the windows don't adjust their size to account for the fact that it is there). I know a way I can do a work-around for this, but I would like to know if there is a "correct" way to do this. I know I can tell the movie player to show on all workspaces and have it on the 2nd monitor.
CHECK OUT THIS THREAD INSTEAD: http://ubuntuforums.org/showthread.p...93#post8937093 I got a problem with my xorg.conf file. I'm just not able to add display resolutions. I'm running Ubuntu 9.10 x86 with Xfce4 desktop enivorment. I got an old Nvidia 6600 GT. I'm on a 21" IBM CRT, and i know that it's good for 2048x1536 @ 75hz.
I know that it can handle 30-130 khz Horizontal and 40-170 hz Vertical.
I also know that i would like to be able to use 1600x1200 @ 85hz.
Right now I'm just not able to go past 1024x768 @ 50hz. I've installed the restricted nvidia driver from the popup restricted driver menu, also tried to downgrade to an earlier driver, did'nt work, then i upgraded again to the newest driver that was easily available through Envyng-gtk. Still no more resolution choiches.
sudo dpkg-reconfigure xserver-xorg just don't work. Nothing happens when i write it in the terminal.
Is it possible to have a different workspace per monitor? At the moment I am using open-source ATI drivers and configures the dual monitors under the display section. x-tile doesn't really work properly with dual screens and I wondered if a different workspace per monitor might help? Either way I'd still like a different workspace per monitor and it is more handy. I can't be bothered with pinning eclipse to each workspace, but that is a workaround. I might go back to xmonad but I can't use it when gnome-shell is shipped in 10.10
Slackware 13.1, on a Dell... Opliplex GX260... running XFCE4, as root. Stuff runs fine. However, the monitor goes to powersave mode after 10 minutes of inactivity. I've turned off power management in the kernel, in the app., have checked the xorg.conf, checked everywhere I can think of, can't find where this is being set. how I can turn this off?
Just got a pretty fresh install of Debian/XFCE. Both monitors work out of the box on my 8400GS. I was unable to find an option to change it so I can span is as 1 work space instead of having them mirrored.
this: Is it possible to have programs load onto a second monitor workspace?I am trying to figure out how to do it with Evolution. When I have my primary monitor occupied with games I would like to keep evolution open on my 2nd monitor, however I don't see a way to:a) Drag it across the screen into the second monitorb) Have it automatically load into that second monitor workspacec) Change permissions to move it directly into a second monitor workspace, only workspaces within the primary monitor
I'm trying to set up a dual monitor system with my Dell E7450 laptop with Debian Stretch and KDE 4.14.2. The graphic card is a Intel HD5500 with xserver-xorg-video-intel version 2:2.99.917-2. The first time I simply connected the HDMI plug, it recognized the monitor and it automagically set up the extended dual monitor. Then I unplugged the HDMI and KDE froze. Now every time I plug in the second monitor the laptop monitor goes black, the desktop goes on the external monitor and the mouse cursor moves only vertically along the leftmost edge of the monitor.
prior to showing the GNOME user logon screen. Unfortunately, all information I seem to be able to find on this appears to be relevant for pre-systemd Linux only.
The situation is that I have two monitors: One small tilted monitor on the left with 1024 x 768 which should be secondary and one larger landscape monitor on the right with 1920 x 1080 which should be secondary. Everything works persistently AFTER a user has logged on. However, after booting the system or after changing users, the small monitor becomes primary so (a) the user needs to logon using that monitor and (b) as the monitor is physically tilted, one needs to tilt the head to read it wihtout the xrandr commands.
If I can get beyond this issue, there is a second issue: While one can pick the primary and secondary monitor in Gnome, monitor numbers 1 and 2 seem to be fixed. This becomes a problem when using freeRDP to connect to a Windows server with dual monitors. Then, the smaller, secondary monitor is number 1 and thus, it is the Windows logon and primary screen. Is there a way to switch numbers 1 and 2 in Linux, for example somewhere in the grub configuration?
Just installed Debian 8, coming from Ubuntu12, it seems I cannot get my dual monitors to work as it should.
I want two monitors side by side, currently I have two identical outputs. I looked around a bit and register two possible problems.
root@bigcem101-debian:/home/bigcem101# xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 400, current 1024 x 768, maximum 1024 x 768 default connected primary 1024x768+0+0 0mm x 0mm
Hence, problem 1: it is as if there is only one monitor detected. Then I tried to look for Xorg.conf ..... and: problem 2 xorg.conf is not there. This seems to be normal but when I installed my Ubuntu years ago it was still there and one could manually set things. There must be something new I am missing.
Card: VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV670 [Radeon HD 3690/3850]
It seems I have both ati and radeon installed.
root@bigcem101-debian:/home/bigcem101# X -configure (EE) Fatal server error: (EE) Server is already active for display 0
I just switched from Ubuntu to Debian and I am having trouble doing something that I found easy to do with Ubuntu. I have a Radeon R9 graphics card from MSI with dual DVI ports and I'm trying to get xrandr/arandr to detect my dual monitors but it only detects one. I've installed all the drivers and even installed the "amdgpu" driver from the Ubuntu repository but still not detecting. What drivers am I missing?
I have an external monitor attached trough a VGA cable to my laptop PC, with the monitor settings shown below. The problem is that when I have the external display connected, video players such as VLC or MPlayer display a black screen instead of the video, with only the sounds working. If I unplug the monitor everything works fine.
Setup Specs: Dist: Debian Wheezy Kernel: Linux 2.6.32-5-686 Gnome Version: 2.30.2 Laptop: Asus Eee PC 1000HE (10" LCD screen) External Monitor: LG Flatron Wide L204WT, 20'' Widescreen LCD Monitor
Pressing left, middle and right button of mouse at bottom and right edges or bottom left, top right and bottom right corners of the screen does not work with fittstool-2.0 on openbox in debian jessie with dual monitor.
Pressing left, middle and right button of mouse at top and left edges and top-left corner on the screen works correctly.
I use openbox on debian jessie. I do not install any desktop environment explicitly.
In the jessie, I installed gcc, make, libglib2.0-0, pkg-config, libcairo2-dev and libxcb1-dev.
I downloaded [URL] .... and confirmed that the sha1sum value of the downloaded file matches sha1sum value given at [URL] ....
I expanded the downloaded file by Code: Select alltar -xvf fittstool-2.0.tar.gz into fittstool-2.0 directory.
I executed with an ordinary (non-root) user: Code: Select allcd fittstool-2.0 make
I executed with root privilege on the fittstool-2.0 directory Code: Select allmake install
I executed the following with the ordinary user: Code: Select allfittstool and ~/.config/fittstool/fittstoolrc was generated.
I modified it as Code: Select all[TopLeft] LeftButton=gnome-terminal MiddleButton=pcmanfm RightButton=iceweasel
[Code] ....
gives: Screen 0: minimum 320 x 200, current 2560 x 1024, maximum 8192 x 8192
VGA1 connected 1280x1024+1280+0 (normal left inverted right x axis y axis) 408mm x 306mm 1600x1200 60.00 + 1280x1024 75.02* 60.02 1280x960 75.04 60.00 1152x864 75.00 1024x768 85.00 75.08 70.07 60.00 832x624 74.55 800x600 85.06 72.19 75.00 60.32 56.25 640x480 85.01 75.00 72.81 66.67 60.00 720x400 70.08
HDMI1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm 1280x1024 60.02*+ 1280x960 60.00 1152x864 75.00 1024x768 75.08 70.07 60.00 800x600 72.19 75.00 60.32 640x480 75.00 72.81 60.00 720x400 70.08
DP1 disconnected (normal left inverted right x axis y axis)
I'm getting used to gnome3 one thing still bugs me- why when I switch workspaces on my multiple monitor machine does only the primary monitor change to a different workspace? The secondary monitor (my laptop screen) shows all open windows I put on it plus it's not even shown in the workspace list.
1) I got a dual screen and I can drag applications on screen No2. But if I log out, reboot or close the application, it will go back to screen No1. Is it possible to memorize the position of an application on Screen No2?
2) I use workspace a lot. I like to split them by function. I got "Development": Netbeans, firefox (one on each screen), "communication": Evolution, gwibber, empathy (Evolution on 1 and the rest on 2) and "Entertainment" (anything not involving work)Every morning, I have to move my applications to the diferent workspace. It would be great if on startup they just go where I told them to be!
I'm trying to get dual monitors working on a fresh install of debian from the netinst install cd. I did not allow the installer to download any packages and then manually installed xorg gnome-core & gdm using apt-get.
The monitors are plugged into the onboard vga and dvi ports of my motherboard. I believe the chipset is intel.
I recently upgraded my Debian box from Jessie to Stretch. After this, apt informed me that I should issue "apt-get autoremove," however the package list to be effected was large and contained some important packages (xorg being just one example). Most of the packages are qt4 related, and I at first assumed qt5 equivalents had replaced them, but seeing network-manager and xorg in the list made me pause.
I've recently installed Debian Stretch and Gnome. After setting up everything I ran into an issue with Rhythmbox, which apparently only occurs if NFS mounts are present in /etc/fstab, independent on the question of whether they are actually mounted or not. I'll attach the results from running it from console with 'rhythmbox -d': [URL] .....
I guess, the last lines are the "problematic ones" but I can't make sense out of them. After the last line, a window opens telling me that rhythmbox isn't responding, whether I want to kill it.
And the /etc/fstab entrys (in case any of those options is an issue):
This is a repost of my initial problem, I need some one who knows what they are doing more than I too take a look at this command output and give some sort of direction/clue/etc on what I'm doing wrong or missing.
Is my xorg.conf missing some vital line(s) or setting?
My best guess is that i'm missing something to tell the Xserver to use both screens, as the Xorg.0.log does not talk about trying to bring up the intel display; but this is just a hunch.
I'm running kubuntu 9.04 with 2 monitors: on-board intel video and a PCI nvidia display: I am using my nvidia display fine, but still can not get my 2nd display (the intel) working. What the heck am I missing?
just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04. nvidia.com) Wed Dec 8 12:27:27 PST 2010
I just upgrade to F14 from F10 on a dual montor setup. Firefox behaives differently on F14 than on F10. On F10 it followed the mouse pointer's location and show up on the correct monitor
When maximized at close, it is always displayed on the left monitor. When not maximized at close it will open on the monitor where the mouse pointer is located.
About minimize/maximize Firefoxe before closing and it seems to work in some case, but not for me.
I have a dual monitor setup in Ubuntu, with my main monitor on the right and the monitor I want to extend to on the left monitor, but I can't seem to get it to do this, it always has the 'desktop' on the left monitor and then extends onto what I want to be my main monitor. I have an ATI Radeon 4350 Graphics card.
Is there any way to put a dual monitor wallpaper on a single monitor configuration using desktop wall? Using only 1/3 or so per wall. Something that will have the effect like the scrolling wallpaper feature on Android/iPhone.
Have 'Phatch' installed and running on 'Stretch'? I had no problems on 'Jessie' but on a new install of Stretch I just get the 'Phatch' icon in the middle of the screen. Tried from Command line and this is the output:
/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py:8196: GtkWarning: gtk_disable_setlocale() must be called before gtk_init() return _core_.PyApp__BootstrapApp(*args, **kwargs) Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/wx-3.0-gtk2/wx/_core.py", line 16765, in <lambda> lambda event: event.callable(*event.args, **event.kw) )
[Code] ......
The 'Phatch' forums have not had any recent posts and the 'Phatch' website [URL] .... has 'Server not found'.
After years with debian stable I'm testing debian...testing (stretch) in a separate partition. I'm just using the stretch repositories and nothing else, so that I won't mess up the system by pulling packages from different branches.
Unfortunately ecryptfs-utils is not (yet) available on stretch. Is there any safe way to use this package on my debian stretch, preferably the stable package from jessie?
How long it will take for this package to reach stretch from unstable?
When i'm tried google there is lots of bootlogd related document there. [URL] .... Yes there is documentation. But I'm only need "enable boot logging","reading boot log". Bootlogd not worked on jessie/stretch.
