Debian Multimedia :: How To Get Xrandr / Arandr To Detect Dual Monitor
Jan 29, 2016
I just switched from Ubuntu to Debian and I am having trouble doing something that I found easy to do with Ubuntu. I have a Radeon R9 graphics card from MSI with dual DVI ports and I'm trying to get xrandr/arandr to detect my dual monitors but it only detects one. I've installed all the drivers and even installed the "amdgpu" driver from the Ubuntu repository but still not detecting. What drivers am I missing?
View 1 Replies
ADVERTISEMENT
Apr 25, 2011
When I'm connecting second monitor to the laptop, Display Settings applet (and xrandr -q) does not detect full list of supported resolutions. I need to restart my system or perform Log off while monitor is connected to make full list available.openSUSE 11.4 32 bit, Ati Mobility Radeon HD 3450, proprietary ATI driver 11.3 8.831.2-110308a-115935C-ATI.External monitor is FullHD SyncMaster B2330 (1920x1080)I wonder is there any other workaround to access full resolution that does not require restarting of the system?
View 7 Replies
View Related
Mar 25, 2010
I'm trying to hook up my TV to my MacBook1,1 laptop running the Lucid Lynx Beta. The TV is connected to the laptop via a mini-DVI to DVI-I adaptor, which is connected to a DVI-I to video adaptor, and this is connected to the TV via a component cable.
Under OS X, after plugging in the mini-DVI cable, the TV automatically becomes a secondary display for the laptop (extending the current screen), so from a hardware perspective everything seems ok. Under Ubuntu, plugging in the mini-DVI cable elicits no response from XRandR whatsoever (xrandr -q reports DVI1 disconnected both before and after). URandR and the regular "Detect Displays" button in the "Monitors" preference app do nothing. The laptop has an Intel GMA 950 chipset, and the Intel driver is running successfully (Compiz works fine). I have a clean xorg.conf (generated by X -configure), except for the addition of "Virtual 2048 2048" in one of the SubSections of the Screen section. I'd be happy to post the full xorg.conf if it would be useful.
So far I have tried xorg.conf tweaks, and I have followed instructions to manually tell xrandr to output to DVI1 as described in the comment by Marko Mikulicic here.
View 1 Replies
View Related
Dec 30, 2010
how Xrandr supports Dual screens. I am attempting to setup Dual Screens on a Ubuntu 10.10 System with an ATI twin head card (DVI + HDMI) Non-mirrored, separate desktops However on connecting a device to the HDMI output - the DVI screen output appears to loose all panels, icons. Only the mouse pointer & desktop background remains.
I believe the output is defaulting from screen 0 to screen 1. I found a solution by creating two devices in xorg.conf and assigning one for each separate screen. BUT this created a new problem of loosing my mouse pointer. how I can get my mouse pointer working or the correct way to setup dual screens.
[URL]
View 9 Replies
View Related
Aug 19, 2015
I'm trying to set up a dual monitor system with my Dell E7450 laptop with Debian Stretch and KDE 4.14.2. The graphic card is a Intel HD5500 with xserver-xorg-video-intel version 2:2.99.917-2. The first time I simply connected the HDMI plug, it recognized the monitor and it automagically set up the extended dual monitor. Then I unplugged the HDMI and KDE froze. Now every time I plug in the second monitor the laptop monitor goes black, the desktop goes on the external monitor and the mouse cursor moves only vertically along the leftmost edge of the monitor.
View 1 Replies
View Related
Feb 18, 2010
Just got a pretty fresh install of Debian/XFCE. Both monitors work out of the box on my 8400GS. I was unable to find an option to change it so I can span is as 1 work space instead of having them mirrored.
View 2 Replies
View Related
Mar 9, 2016
In Debian Jessie Gnome with two screens, I would like to execute
xrandr --output HDMI1 --primary --right-of eDP1
xrandr --output eDP1 --rotate left
prior to showing the GNOME user logon screen. Unfortunately, all information I seem to be able to find on this appears to be relevant for pre-systemd Linux only.
The situation is that I have two monitors: One small tilted monitor on the left with 1024 x 768 which should be secondary and one larger landscape monitor on the right with 1920 x 1080 which should be secondary. Everything works persistently AFTER a user has logged on. However, after booting the system or after changing users, the small monitor becomes primary so (a) the user needs to logon using that monitor and (b) as the monitor is physically tilted, one needs to tilt the head to read it wihtout the xrandr commands.
If I can get beyond this issue, there is a second issue: While one can pick the primary and secondary monitor in Gnome, monitor numbers 1 and 2 seem to be fixed. This becomes a problem when using freeRDP to connect to a Windows server with dual monitors. Then, the smaller, secondary monitor is number 1 and thus, it is the Windows logon and primary screen. Is there a way to switch numbers 1 and 2 in Linux, for example somewhere in the grub configuration?
View 3 Replies
View Related
Sep 2, 2015
Just installed Debian 8, coming from Ubuntu12, it seems I cannot get my dual monitors to work as it should.
I want two monitors side by side, currently I have two identical outputs. I looked around a bit and register two possible problems.
root@bigcem101-debian:/home/bigcem101# xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 640 x 400, current 1024 x 768, maximum 1024 x 768
default connected primary 1024x768+0+0 0mm x 0mm
1024x768 0.00*
800x600 0.00
640x480 0.00
720x400 0.00
Hence, problem 1: it is as if there is only one monitor detected. Then I tried to look for Xorg.conf ..... and: problem 2 xorg.conf is not there. This seems to be normal but when I installed my Ubuntu years ago it was still there and one could manually set things. There must be something new I am missing.
Card:
VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] RV670 [Radeon HD 3690/3850]
It seems I have both ati and radeon installed.
root@bigcem101-debian:/home/bigcem101# X -configure
(EE)
Fatal server error:
(EE) Server is already active for display 0
I am clueless.
View 0 Replies
View Related
Mar 9, 2010
I am trying to set up dual monitors for lenny but nosuccess for the moment.
They were working fine for the same setup on ubuntu.
Using xrandr I get:
I read that virtual screen size could be the maximum part which is of no use in comparison to the current size.
So setting a virtual part in my xorg does not help much. If the above is right.
I have:
How to get the external monitor work in the extened screen mode.
View 2 Replies
View Related
May 24, 2011
I have an external monitor attached trough a VGA cable to my laptop PC, with the monitor settings shown below. The problem is that when I have the external display connected, video players such as VLC or MPlayer display a black screen instead of the video, with only the sounds working. If I unplug the monitor everything works fine.
Setup Specs:
Dist: Debian Wheezy
Kernel: Linux 2.6.32-5-686
Gnome Version: 2.30.2
Laptop: Asus Eee PC 1000HE (10" LCD screen)
External Monitor: LG Flatron Wide L204WT, 20'' Widescreen LCD Monitor
View 3 Replies
View Related
Oct 12, 2015
Pressing left, middle and right button of mouse at bottom and right edges or bottom left, top right and bottom right corners of the screen does not work with fittstool-2.0 on openbox in debian jessie with dual monitor.
Pressing left, middle and right button of mouse at top and left edges and top-left corner on the screen works correctly.
I use openbox on debian jessie. I do not install any desktop environment explicitly.
In the jessie, I installed gcc, make, libglib2.0-0, pkg-config, libcairo2-dev and libxcb1-dev.
I downloaded [URL] .... and confirmed that the sha1sum value of the downloaded file matches sha1sum value given at [URL] ....
I expanded the downloaded file by
Code: Select alltar -xvf fittstool-2.0.tar.gz
into fittstool-2.0 directory.
I executed with an ordinary (non-root) user:
Code: Select allcd fittstool-2.0
make
I executed with root privilege on the fittstool-2.0 directory
Code: Select allmake install
I executed the following with the ordinary user:
Code: Select allfittstool
and ~/.config/fittstool/fittstoolrc was generated.
I modified it as
Code: Select all[TopLeft]
LeftButton=gnome-terminal
MiddleButton=pcmanfm
RightButton=iceweasel
[Code] ....
gives:
Screen 0: minimum 320 x 200, current 2560 x 1024, maximum 8192 x 8192
VGA1 connected 1280x1024+1280+0 (normal left inverted right x axis y axis) 408mm x 306mm
1600x1200 60.00 +
1280x1024 75.02* 60.02
1280x960 75.04 60.00
1152x864 75.00
1024x768 85.00 75.08 70.07 60.00
832x624 74.55
800x600 85.06 72.19 75.00 60.32 56.25
640x480 85.01 75.00 72.81 66.67 60.00
720x400 70.08
HDMI1 connected 1280x1024+0+0 (normal left inverted right x axis y axis) 376mm x 301mm
1280x1024 60.02*+
1280x960 60.00
1152x864 75.00
1024x768 75.08 70.07 60.00
800x600 72.19 75.00 60.32
640x480 75.00 72.81 60.00
720x400 70.08
DP1 disconnected (normal left inverted right x axis y axis)
View 9 Replies
View Related
May 14, 2010
I'm trying to get dual monitors working on a fresh install of debian from the netinst install cd. I did not allow the installer to download any packages and then manually installed xorg gnome-core & gdm using apt-get.
The monitors are plugged into the onboard vga and dvi ports of my motherboard. I believe the chipset is intel.
At the moment the displays are cloned.
I don't know much about xorg.
This is my xrandr output:
View 1 Replies
View Related
May 29, 2011
I've installed Squeeze 2.6.32-5-amd64 on my laptop (Alienware M17X R3, Intel i7 Sandybridge, ATI Technologies Inc Broadway [ATI Mobility Radeon HD 6800 Series])The screen is 17", with maximum resolution of 1920 x 1080. After a default install of the operating system, the maximum resolution I can select is 1280 x 1024.My research so far has suggested that I need to edit the /etc/X11/xorg.conf file and provide xorg with the necessary resolution.
Again, by default, the xorg.conf file is not created. This leads me to believe that xorg is scanning my hardware at startup and providing me with whatever it thinks is appropriate. I tried following these instructions to generate an xorg.conf file. This process created an xorg.conf file under /root/.
When I copy this xorg.conf file to /etc/X11, I get a blank (i.e. black) screen. Deleting this file restores the default resolution 1280 x 1024.This system is dual booting with Windows 7. Under windows I am able to get a 1920 x 1080 resolution, so I know my hardware is up to it.At this stage I have yet to install the drivers for the Radeon graphics card.What are my options regarding configuring xorg to give me a higher screen resolution?
View 6 Replies
View Related
Dec 22, 2010
I can run xrandr and I get the various modes thatwill supposedly work with my monitor.Then, I run xrandr -s 800x600 and the command tells me thathat mode is unavailable, even though it claims that it is in xrandr -s.What on earth does that mean, then?
View 4 Replies
View Related
Jun 3, 2015
Background: I am running Debian 8 with the Xfce DE on my Toshiba Satellite Laptop.
When at home I will connect my laptop to an external display. I did the same while I was running Ubuntu; however, with Ubuntu I could activate my laptop display by simply disconnecting the external monitor. With Debian + Xfce, unplugging the external monitor leaves my laptop screen blank.
In order to activate my laptop display, I have to open Display settings, turn on laptop display -- which still leaves my laptop screen blank -- and then switch resolution: there are two listings for 1366x768 under resolution, and only the second one restores my laptop display. Please note that if I have both displays on at the same time the size of the output on my external monitor will be reduced to about the size of my laptop's display.
I would like the create a Bash script which can automatically switch between my displays. After some Googling it seems like xrandr is the tool I need for the job. However, I have been having trouble getting it to work.
I tried the command Code: Select allxrandr --output LVDS1 --auto --primary --output HDMI1 --off. This however just turns my external display off without turning on my laptop's display. I suspect this has something to do with the fact that LVDS1 has two modes at 1366x768; perhaps only one of them can actually display? I'm not sure, but anyways here's the output of xrandr:
Code: Select allScreen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 344mm x 193mm
  1366x768   59.99*+
  1360x768   59.80  59.96Â
  1024x768   60.00Â
  800x600    60.32  56.25Â
[Code] ....
Is there a way I can specify that xrandr should use the second 1366x768 mode?
I just realized that the second mode is, in fact, 1360x768 rather than 1366x768...
The good news is that I fixed my problem. It turns out that my backlight was not turning on, giving the appearance that my laptop screen was not displaying anything.
View 2 Replies
View Related
Jun 3, 2011
I have problems with xrandr in a system with Nvidia GeForce 8600GT video card. I want to use xrandr to rotate the screen on the fly.
~:$ xrandr -q
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 320 x 175, current 1600 x 1200, maximum 1600 x 1200
default connected 1600x1200+0+0 0mm x 0mm
1600x1200 50.0*
1600x1024 51.0
[Code]....
I tried enable the last option, change values for xinerama and twinview, but nothing works.
View 1 Replies
View Related
Sep 14, 2010
I'm running 10.04 on a Radeon HD 4650 card with fglrx. The driver installation went without a hitch, and the log file contained no errors.
When I try to run
Code:
aticonfig --initial
i get the response
Code:
Found fglrx primary device section
Unable to find any supported Screen sections
Running
[Code]....
My best guess is that I have to write an Xorg.conf file, in which I say what type of monitor I have.
I cannot do that, as I need to shut down the Xserver in order to make it generate my xorg.conf file. When I shut it down I get the black screen.
View 3 Replies
View Related
Jun 6, 2011
I occasionally connect my laptop to my TV and watch shows on the larger screen.After upgrading to 11.04, "Detect Monitors" no longer detects my TV. This worked in 10.10 and 10.04, and possibly in earlier versions.
View 1 Replies
View Related
May 13, 2015
Updated old Eeepc 1005HAB to Jessie. Used to have a text file:
xrandr --output LVSD1 --mode 1024x600 --fb 1024x768 --panning 1024x768"
that I could run (twice in a row, it needed) to allow the scroling of the screen to see the bottom 1/4.
This no longer works.
View 0 Replies
View Related
Mar 17, 2011
Are you running Lenny? If yes, try this:
Be sure that there is an active X.
Press Ctrl+Alt+F1 to switch to tty1.
Login with your normal username and password.
Enter the command: "xrandr -d :0.0 -q"
You should be rewarded with information about your current screen.
Are you running Squeeze? If yes, try the above procedure and please explain to me what this means: No protocol specified
Can't open display :0.0
View 1 Replies
View Related
Apr 7, 2016
Debian Jessie does not detect one of my monitors (I have two) when I use the default drivers (nouveau) for my NVIDIA graphics card. It does work when I install the proprietary drivers, but then, after a couple of reboots, I get many problems (when I log in, it does not manage to load the desktop environment). I've tried this a couple of times unsuccessfully.
How to make the machine recognize the dual screen with the default drivers?
View 9 Replies
View Related
Dec 27, 2010
This has been happening with the majority of screens I try to plug into, but the proprietary nvidia driver never detects the correct resolutions -__- the open-source driver works perfectly with a little xrandr magic, but I'd like to have some 3D acceleration going on. I'm using the desktop version of Nvidia ION and ubuntu 10.10, with the current nvidia driver (from the repositories). The native resolution is 1440x900 @60 Hz. Any thoughts on this? Again, the nouveau driver is great but I'd like to have VDPAU and the like working. code...
View 9 Replies
View Related
Apr 13, 2011
My netbook DOES seem to know when I plug in or remove an external monitor. Can I get it to simply auto-switch?
View 4 Replies
View Related
Feb 26, 2011
I have a dual Monitor Setup, both SXGA LCDs, one rotated left. With kernels and Xservers available from debian making settings appropriate kills X and apparently leaves modesetting and keyboard missconfigured - monitors say: no signal and it is not possible to switch to any VT until sysrq-unraw (alt-print-r) is pressed, which makes the system responding to keyboard, but still leaves the screens blank. Restarting the display manager sets a working mode with both screens showing the same.
View 1 Replies
View Related
Mar 14, 2010
I have two monitors, my laptop screen, and an LCD monitor. I want to configure linux to put one virtual desktop on one, and a second on another. I'm using Compiz as well, so I'd like it to show one side of the cube on each monitor. I'm not really sure how to go about setting this up though. My attempts so far have stretched the same desktop across both monitors, or resulted in an unusable monitor that just sits there with the default background. While I was trying to figure this out I came across something called XRandR that lets you connect/disconnect monitors without restarting xserver. I'm not sure how to get this going either, the only tutorials I found were for intel chipsets, and I'm using the proprietary NVidia drivers.
View 9 Replies
View Related
Jan 10, 2011
I ran the following commands on my ubuntu desktop :
xrandr --output VGA-0 --mode 1680x1050
xrandr --output VGA-1 --mode 1680x1050
xrandr --output VGA-1 --left-of VGA-0
This gives me dual head. I have a second machine on the same 100mbps network that is also running Ubuntu. I want to run X on that machine and have it's X session as a monitor in xrandr, so I would add something like this :xrandr --output REMOTE-1 --right-of VGA-1Is this possible?
View 1 Replies
View Related
Oct 12, 2010
I was trying to add a new resolution mode to my monitor, but XrandR always fails. These are the steps I follow:
Quote:
$ gtf 1280 768 60
then I copy the result and type
Quote:
xrandr --newmode "1280x768_60.00" 80.14 1280 1344 1480 1680 768 769 772 795 -HSync +Vsync
[Code]....
Finally I just can't create another resolution. And yes, my monitor should run in 1280x768.
View 9 Replies
View Related
Jul 16, 2011
I am running ubuntu 11.04. I am able to set my screen size to 1600x1200 in windows but ubuntu doesn't offer me that size in xrandr, though it says my maximum size is 4096x4096, I have posted my xrandr results below. What do I do to set my screen to the higher resolution?
Screen 0: minimum 320 x 200, current 1280 x 960, maximum 4096 x 4096
VGA1 connected 1280x960+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 60.0
800x600 60.3 56.2
[Code]....
View 3 Replies
View Related
Mar 8, 2011
I just found some strange behaviour with xrandr. I've got a dual screen setup (both 1680x1050) on which I want to span my desktop. I'm using the ati (amd) proprietary driver from livna to do this. I edited my xorg.conf to include the 'Virtual' line under screen.
When I add this to the "Screen" section:
The driver breaks and I get a resolution of 1400x900 and still not the option to span my desktop.
When I change that to read Virtual 1680 2100
It all works fine but I have to have my desktops on top of each other.
View 3 Replies
View Related
May 5, 2010
I am running Fedora 12 on a T400 Thinkpad. When connector my external monitor prior to powering on the computer or if I restart it, I get a lot of resolution choices from xrandr. See below.
Code:
$ xrandr
Screen 0: minimum 320 x 200, current 1440 x 900, maximum 8192 x 8192
LVDS1 connected 1440x900+0+0 (normal left inverted right x axis y axis) 303mm x 190mm
1440x900 60.0*+ 50.0
1024x768 60.0
[Code].....
Is there some daemon I need to restart to detect the monitor resolutions correctly, or is there a module I can reload?
There seem to several variables to reproducing the behavior. If I restart without the laptop without the monitor plugged in, log in, and then, plug the monitor in with the monitor powered on prior to plugging, all resolutions are detected properly. However, if I plug the monitor in with it powered off, then power it on, I only get the few options shown in above. Once I get the reduced number of options, it seems to stay that way till I restart regardless of how I unplug the monitor.
I have found a work-around by just forcing the modes with xrandr --newmode and xrandr --addmode, but I would much rather have the modes autodetected.
View 1 Replies
View Related
