Debian Programming :: Replace Certain Text In A File With Person Username Automatically?
Mar 16, 2014
Is there any way to use sed to replace certain text in a file with the persons username automatically? Right now i'm using
Code: Select allsed -i.bak s/STRING_TO_REPLACE/STRING_TO_REPLACE_IT/g file.foo
I would like it to automatically inject the persons usrname in the replacement string. Is this possible? I've been looking on line at various sed tutorials and I cant quite find what i'm looking for. I also didn't really see anything in the forums search function.Essentially i'm trying to take this file URL...Android.rules and replace all instances of username with the persons actual username automatically.
This is what I have right now. Well, I thought I knew sed, and apparently I don't... I tried writing this for someone else, and this has given me trouble, so since the user pretty much figured it out on his own, here it goes. Say VARR=1, so VARX and VARY contain the above text, appended by 1. What I am trying to do is replace the text "defaults.ctl.card 0" by VARX and "defaults.pcm.card 0" by VARY. The contents of FILE1 is the file being used to search for both text fields, and FILE2 is the output file. I tried using single quotes, double quotes, and a mixture of both, and no go whatsoever. So my question... What is the proper way of searching for text within a file and replacing with a variable?
As indicated in the subject, I want to search a text. If the text is present I want to replace it. But if the text is not present, I want to insert it after first line and before last line.
I want to use SED to do the following: In a text file replace any occurrences of the three character string ZZZ with a quotation mark "and. replace all occurrences of a comma with a semi-colon. It is the S/ / / command which is stumping me on the first issue...inparticular how to get the replace string to be quote.
Something very handy to do in a Linux shell, is manipulating files and strings - essentially parsing data. Write a utility which will scan in a text file and search and replace strings. We also want to keep track of how many strings we've replaced.
I know that my command would look like this: <utility name> <filename> <stringToSearchFor> <stringToReplaceWith> Code: #!/bin/bash
I want to search a file for a particular pattern and if pattern found replace the line with new text. i am using awk 'match($0,"pattern") != 0 {print $0} ' filename to check if the pattern exists.how do i get the line number of the pattern and delete that line and replace the line with my new text?
(if need be, i think i can just add another line of "-e /s/char/newchar/" if i need to target more charecters or words as needed.) the issue with the above code. . . how do i get it to target whatever text file follows the command? without having to manually designate sed to it each time? e.g. in commanding:
When I grep kernel.exec-shield I get both line, hence I keep over writing the kernel.exec-shield-randomize in my script because it finds them both for my sed commend.
How can I get an exact match with either sed/awk/grep in shell so I can do a find and replace?
Example: sed 's/^kernel.exec-shield =.*/kernel.exec-shield = 1/g' /etc/sysctl.conf will replace BOTH lines
Example: grep "^kernel.exec-shield" find both line and I want it to find only the exact line.
I have an SQL dump, file.sql that has many references to a particular domain, d1.com. I would like to run a command that can replace every occurrence of d1.com with d2.com. I've tried looking into sed before but the man pages are quite daunting.
I have bought a pdf dictionary, but I would like to convert it to stardict for my ereader.
I have converted the pdf into txt but is quite a bad result. So I need to reorganize a bit the txt.
I'm not a programmer, so I should need you write me a small script (python, sed, bash...) that if at the end of the line there is not a point then the line have to be joined with the following line. Sometimes happens that there is a point even in the middle of the line: in this case the line have to be splitted.
Once last thing: after the first word it's needed a TAB. I have appended a preview of the txt file.
I have large text files with space delimited strings (2-5). The strings can contain "'" or "-". I'd like to replace say the second space with a pipe. What's the best way to go? Using sed I was thinking of this:
I'm having problems with Tomboy. I have a few hundred note files and I need to go through all of them and replace all instances of "<link:broken>a</link:broken>" with "a". Is there a bash command I can use to do this?
on creating a new perl script which replace IP address from the text file. eg. If in a file, we found any word like 11.222.333.44 then it has to be replaced to XX.XXX.333.44
I am having trouble writing a script that monitors a text file. When the file contains number 1 (or any other string that is not a command) it does nothing, but when it is something different from 1, it executes that command.
So, there are 2 files: monitor.mon - this is the file that will be checked constanlty; and test.sh - the script that does the job. The monitor.mon file will have its content modified by php. This means a web page will have a form where I input commands and writes does commands in the file. Test.sh will watch when the file's content changes from character 1 to a command, execute that command and write back a 1 so it will not execute it more times.
I tried combining while and if but with no success. Tried reading the file with cat and grep -e but it doesn't seem to recognize when content changes.
I am playing around with PyGTK and come across a problem: When I put a TextView inside a ScrolledWindow, and type text into the TextView until it reaches the edge, the cursor goes outside the viewport and I can't see what I'm typing. How to make it so that the ScrolledWindow automatically scrolls so that the caret in the TextView is always in visible?
I need to insert 3-4 lines of text to the beginning of a text file. The file is a largish MYSQL dump, the result of a backup shell script. This shell script should insert the required text.I've wrestled with sed, but lost.
I have to delete a certain line of text from the a textfile via ubuntu's shell scripting.I have done research, and it seems that most people advocate the usage of sed /d option. sed makes does not edit the text file. Hence, most options I discovered involved the use of a temporary variable/textfile and then overwriting the old file with the temporary new file. Is there anyway whereby I can bypass the use of temporary storage containers? I hope there is any magical combination of commands to edit the file directly.
I want to display something in my text view widget in glade using c code. that's all right. now I need to attach a save button beneath the text view.so that on click the text view content should save as a txt file..
I want to display the contents of a particular log file (simple text file, I mean in Linux). But there is a problem: The contents need to be organized in a fixed format. Have a look at this log file:
So, while displaying the contents of above file on a web page, I want to format the field names found in the log file: User Name:, Reported Problems Description:, and Remarks:. These fields may contain a variable length of text and no specific line number is assumed for them to appear on.
Well, what I am trying to do may sound wierd to some of you. The filed "Reported Problems Description:" can possible contain text which embeds colon (.
a sed command to add a text before line number in text file? I have text file with 500 lines, and i want to add 3 more lines with text after line 300, OR before line 302, isn't no problem.
I have script that I'm working on that updates a username in all the files that are called blah.inc for my framework. since i host a bunch of these web apps i need to do it to all of them. so I need to figure out how to update these files automagically with out me watching it to call vim every time. heres what I have so far
Code:
This finds the files but now i need to figure out how to do s/bob/fred/g on those files.
The problem I have is that I need to replace a more complex string, like this: Old string: /mnt/stor6-wc2-dfw1/627896/982574/ New string: /mnt/stor8-wc2-dfw1/369587/302589/ There I don't know how to do it... since the / is what separates the old from the new strings, and the strings that I want to replace have / in it. Also, I would like to know how to specify under what folder replace the files, for example, I want that it search/replaces all files under /var/www/mysite/htdocs folder.
