I have text files (.txt) to open with gedit but every time I try to open a text file it says:
Code:
Do you want to run "Installed programs", or display its contents?
And if I press Display it will open. How do I make it open automatically?
i recently installed Fedora 14 and when i'm trying to open any file i'm getting this error
[root@blitz Documents]# gedit /home/blitz/Desktop/test
**
GLib-GIO:ERROR:gdbusconnection.c:2270:initable_init: assertion failed: (connection-
[code]....
Using the latest version of Ubuntu desktop on an emachine t5062 if it matters. I have a text file of keywords that is one-three words line after line for like 5000 lines. How would I go about adding a word to each line.Aside from typing it in or copying and pasting.If it can`t be done with Gedit I am all for using another program.
View 8 Replies View RelatedI can do it with mousepad. Below is what I get when trying to open with gedit
[Code]...
What does this message mean:
'(gedit:14074): Gtk-WARNING **: cannot open display:'
I'm trying to open a text file from another computer via ssh. Is it a permission problem.
I ran a program that writes continuously from 1 every line. After some time I ran '/dev/null > temp' Problem1: bash: /dev/null: Permission denied (Yes, the permissions of /dev/null are correct ... crw-rw-rw-. I removed and created it again, but no change) I used 'cat temp' to see the contents and first few lines deleted (working correctly). Problem2: I can't open the file (with double click or with any graphical editor like gedit)
Apart from these problems, I have another question... Is there a way to trim a active log file to say 80% without affecting any logs that server might be writing.
The problem that I am having now is that I can not is the text when the menus come up or when opening a file from the cd or curraculum on line. I have cairo-dock running and a conky running. Could this be the couse of my problem? I was going to uninstall and reinstall packet tracer but I am unsure on how to uninstall.
View 1 Replies View Relatedopening a text file from glade interface.how?using c code
View 1 Replies View RelatedI am a beginner at programming and have been given an assignment by my professor. Its a text file with lines of varying lengths. All I have to do is write a code to open the file and see the output in an excel sheet. Have been asked to use C/C++ or visual basic
View 5 Replies View Relatedubuntu 10.04 installed via usb on WD external HD,now my problem is every time i double click on any of my shortcuts like the row you see(screenshot)near the bottom middle of the screen going upwards not the dock itself but the row of folders or the one on the top left(browse c:drive(wine) it allways comes back the way you see the window in the pic ,with that error,even if i open c:drive in the start menu and they worked fine before today and right clicking dosent give me the option to open with another app.
View 6 Replies View RelatedI received this odd error when opening gedit from the terminal . gedit opened, but this error worries me code...
After changing the hostname, you need to reboot your machine. That fixed it
Is there any way to use sed to replace certain text in a file with the persons username automatically? Right now i'm using
Code: Select allsed -i.bak s/STRING_TO_REPLACE/STRING_TO_REPLACE_IT/g file.foo
I would like it to automatically inject the persons usrname in the replacement string. Is this possible? I've been looking on line at various sed tutorials and I cant quite find what i'm looking for. I also didn't really see anything in the forums search function.Essentially i'm trying to take this file URL...Android.rules and replace all instances of username with the persons actual username automatically.
Code: Select allsed -i.bak s/username/$USER/g 51_Android.rules
I just started using FireFTP instead of FileZilla because I got fed up with FileZilla not opening remote files and not recognising the default editor Gedit.
I really want to use keyboard shortcuts with FireFTP, which is possible according to the help docs on-line, but there is no option to use shortcuts anywhere even having enabled FireFTP to open in a new window. I tried it in Shiretoko 3.59 and Firefox 3.18 with no luck.
I just tried removing FileZilla and it does not appear in my list of installed apps. It appears in the full list as uninstalled but when ticking the box to install gives this message. FileZilla FTP client cannot be installed on your computer type (i386). Either the application requires special hardware features or the vendor decided to not support your computer type. I already have FileZilla..so how is that?
running 10.04 netbook lucid lynx and I have couple of simple plain gedit text files. Wheenver I open them I am always prompted "this is an executable file, with the the choice to Run in Terminal Display Cancel Run how do i get these simple text files (which are not executables unless file type got messed up) just to automatically display in gedit (they're set to open wtih gedt app).
View 7 Replies View RelatedI recently upgraded to Ubuntu version 10.10 64-bit and since then closing GEdit won't stop the process automatically when the window is closed and I have to kill it manually. I didn't have this problem with version 10.04 (also 64-bit) and I didn't change any settings after the upgrade.
View 2 Replies View RelatedI hope I am pasting this in the correct place. I am a big fan of minimalist software- and Gedit is an excellent program. Now I am not a a programmer or anything, but I do like to write, and Gedit seems very well suited towards what I want. A simple word-bashing-out program.
But my problem is that it does text-wrap to the margin. Now I don't particularly want to do this manually, and the option in the preferences menu doesn't seem to work.
I'm a ruby on rails programmer, and I installed a snippet that supports .rhtml or .html.erb code (the rails code) in GEDIT HOwever, everytime I make a new .html.erb file, the snippet doesnt automatically activate the document. I have to manuelly go up to View=> Highlight Mode => Scripts => RHTML How can I set it so that all the files that have an .html.erb or .rhtml extension automatically use that snippet?
View 1 Replies View RelatedI use a text editor mostly for opening up and editing ascii text files that are used by the programs I write. For example, manually editing comma separated value data files.
I've been using Gedit for this, and it's been very frustrating because I started noticing new-line characters (hex 0A) were creeping into my CSV ascii data. It turns out that Gedit has an undocumented "feature" where it silently introduces a new line character at the end of any file you edit, and there is no way to turn this feature off! See this bug report. I installed GVim, and a quick test shows that GVim does the same thing.
I would like a recommendation for a more straightforward text editor, which:
1) Doesn't add extra bytes to the file (or if it does, this behavior can be turned off).
2) Allows you to force ASCII when opening a file (sometimes Gedit will make an incorrect assumption about encoding because of a stray non-printable character)
More advanced features would be nice, like regular expressions for search and replace, but I need this basic functionality first.
I want to copy/paste some text to vim from gedit. The original text looks like this:
I start vim, press "i", then right click, paste, and get this:
How could i set vim to not to do this? How can I copy/paste my text so that I don't need to delete those unnecessary tabs?
Strange line of text appeared on open gedit page on first use after upgrade from 10.04 t0 10.10. I was reading something and copypasting the odd bit onto a gedit note: left the room, returned to find blank page except for "nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnn". Then I saw that it was just the tail-end of a longer line which had stretched the page width to max, and by deleting backwards I arrived beneath my intact notes. The line was "I[my bolding]nnnnnnnnnn...nnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnnby v9898". I googled v9898. And there's a v9898. com. It provides something for Windows systems.
View 1 Replies View Relatedim trying to output a list of running processes via a shell script. At the moment i got this which outputs the processes to a text file called out.
echo $(ps aux) >>out
The problem is though, the processes are all just one big block of text which makes it hard to read. Does anyone know how to sort the output to a text file so that it prints to the text file at 1 process per line? I know its probably simple but im very new to linux.
So I have Python file :
Code:
#!/usr/bin/env python
print 'python'
raw_input('')
And another :
[Code]....
as it should. I don't want to take such a hassle always running python by path.
I really hate this warning when I try to open certain types of files in gedit: (using ubuntu lucid)
Quote:
Do you want to run File.c or display its contents?
"File.c" is an executable text file.
Open in Terminal; Display; Cancel; Run
Is there any way to remove the warning? I have never once clicked anything other than display, and when I'm opening lots of files, having to hold down ALT-D to get rid of these warnings.
Well title say it all how do you disable the screen programs opening text in 11.04 so you do not have to hit the enter key twice to get by the two pages of text to actually be running the program you started.
View 1 Replies View RelatedIs there any gedit plugin, which expands folders of file browser side pane and shows currently editing file, while user switches between tabs?
View 1 Replies View RelatedI have some text files (Just plain text files, not OpenOffice files or anything) and when I try to open them in Windows they are all one line. I think I read somewhere that Linux uses for new lines whereas Windows uses or something... I am using Kate to edit them, and I have a LOT of files to fix so...
View 9 Replies View Relatedlocalhost not opening php files text editor
View 1 Replies View RelatedI have a text file called file1.txt containing many lines eg.
line1
line2
line3
line4
line5
line6
Then i have another text file called file2.txt contains
3
5
6
Is there a command to remove the lines in file1.txt based on the keywords in file2.txt? note: It should remove line3,line5,line6 based on 3,5,6
Using ubuntu 9.10
If I'm in a terminal window, and I open a file by typing eg :
It opens as a blank document... I know it has text in it though!
I've tried with other files and also with nano so it's not just a problem with a particular file.
How do I view the current contents of the file so I can then edit it?
I'm trying to be able to Open a text editor without needing an existing file.This is my code:
case $ans in
"Show Today") echo "$(date)";;
"Show Calendar") cal;;
[code]...