I'm having a problem with krusader. When I open and close it, it remains with a sleep status. This can be verified by the system monitor and by the "ps aux". The krusader only go away if I use killall. This is occurring in more than one machine. I'm using squeeze gnome 64 bits.
View 2 RepliesKrusader in root mode can't open ark? What's broken here?
What needs to be fixed for this to work?
So I'm pretty awful at keeping Debian up to date, I guess. I'm using cron-apt to fetch updates every night, then apply them whenever I get around to it. Well, I neglected that last part for a month or two, and after some routine downtime to clear the case of dust, I decided it was time to upgrade. So I ran the command, everything checked out fine, and I was on my merry way. Until a half-hour ago when I accidentally shutdown the computer (I use the same zsh prompt on each computer, so I got them confused.) I turned it back on, only to be greeted with a black screen after all the services started up.
Everything works: ircd, MPD, etc. EXCEPT, of course, X. At first I thought the update broke SLIM, but after checking htop and doing a killall slim, it doesn't appear to be running (the screen remains black.) I hit Control-Alt-f2 to get to get back to a terminal, then tried doing startx, which freezes the computer entirely. All the network services stop, I can't SSH in, etc. It's dead. If I'm not mistaken, Xorg.0.log should say something, but I'm not a huge expert on it. The last line isn't an error, I can tell you that. So what's the deal here? apt-get remove xorg and start over?
I recently came to Debian. As I have an ati card, I tried the proprietary drivers first, but then came back to radeon (open-source). In the process, I think I may have broke my xorg.conf . Sometimes, when the monitor goes into sleep mode, when I came back, the screen remains black (sometimes I see just the cursor).
Here is my xorg.conf
# NOXORGCONFEXISTED: No X.org configuration file existed when this backup was created.
Also, I have lots of backups in my X11 folder, like xorg.conf.fglrx-3, xorg.conf.original-1, or backup.xorg.conf. Is it safe to remove them? What should I do about the main xorg.conf?
I'm having some problems with banshee that started about 6 months ago. Banshee remains idle and does not play any type of music file. I've tried installing and selectively installing Gstreamer codecs with no success. I'm running stretch.
View 8 Replies View RelatedI have problems with a very slow workstation (even the mouse movement takes seconds....). Analyzing the processes, I found out that raid related processes are the reason. I have 4 HD, 2 pairs of raid 1. One set of HD covers md0-md3 and one set of HD covers md4-md6. ( run an updated CentOs 5.5 ws) I see that "md0_raid1" process is changing from status "sleeping" to "uninterruptible" about every 4 seconds. I changed one HD in this raid 1 set (which covers md0, md1, md2 and md3). When I only had one HD in this raid 1, there were no such processes (of course there was nothing to mirror to ....)
During the exchanging of one of the HD in this raid 1 set (md0-md3) (which I thought was the bad one)), I removed (by mistake) one HD from the other raid pair (md4-md6), which I now am rebuilding, using the mdadm add command. Checking the process list, they show indeed up as "md5resync" in the process list. Same for md4 and md6. This seems OK. But why do I have these continously recurring "md0_raid1" process in my list, listed as "uninterruptible" ?? What is happeing? When I check with mdadm --detail /dev/md0:
[Code]....
I would like to remove it, because typically I don't need to see it all day. Its enough if it shows up when i go to the upper left corner and see all running applications.
I found this: [URL].... but if you add the repo in that article and update apt,the repo fails.
second try(this one works): [URL].... different extension, same goal. but this one works with gnome 3.14.2 allow gnome to change files when firefox asks.
I'm using Squeeze, and haven't seen an update in the Debian repo for some time. Seeing as it's due for release soon (September), can we expect some updates in the near future? I had been using Gnome Shell in Ubuntu with much success, including compiling my own. These days, I cannot afford the bandwidth, and have encountered an unknown problem [URL] under Debian Squeeze. Currently, I'm experiencing a very annoying flickering issue using the repo version which I know does not exist anymore in the current gnome development. To have at least one update now before the release date would be nice to see.
View 14 Replies View RelatedI've got the new beta working in ubuntu 64 bit lucid 10.4. But, I have to go to admin/sys monitor and end the boxee "sleeping" process B4 it will start again after exiting The app? Id sure like to fix it.
View 4 Replies View RelatedThis is my first day with Debian, I have used other distros, and am a long time linux user. My HP D 1600 series is recognized, but when I try to print a test msg. it says sent, but the printer remains idle. I have tried everything I know. When I run the trouble shooter I get this. /// /usr/lib/cups/backend/hp failed////
In the past when having a printer problem I have installed HPLIP-gui and removed the printer then re-installed it. That has not worked and I cannot even remove the printer.
I have a problem with my Debian squeeze system. After I have run some CPU-intensive application for a while the system becomes sluggish. Ok, maybe one would expect that. But. The system remains sluggish even after that process has been killed and then top shows high cpu usage from unrelated processes and a high %sy percentage as well. I don't really know where to begin solving this problem except I've checked that this is specifically related to (at least) CPU use as opposed to heavy memory use or IO (by running an application with low mem/no io but high cpu use). I am running the latest standard kernel from squeeze, 2.6.32-5-686. Also, thing is, I remember having similar problems with other Linux distros before, where for example gzipping a large file would cause the same. I did not have similar problems on {Net,Open}BSD, so a hardware fault seems an unlikely reason to me.
View 7 Replies View RelatedI installed Debian 8.1 with iceweasel 38.2.1esr-1~deb8u1
Whenever I want to open a youtube fragment I do hear the sound but the screen just remains green. I already googled the issue but found no solution that works.
Things beyond my control are causing me to rush a bit in getting the website moved. I'm working hard to try and get it done, but something else has come up that SSL Certificate.I know that our website's "basket" area is protected by an SSL certificate to ensure customer information, especially credit info, is secure. With the move to Amazon's service, it looks like I may need to create our own self-signed SSL certificate to ensure the basket area remains secure.
I have found guides that walk through how to make one yourself and configuring apache to allow it, but something else has come to mind. The guides I found don't really indicate where the SSL certificate goes afterwards, and also doesn't suggest which sections should be governed by the certificate (as only the basket section uses it, not anything else). How would I find out that information?
after a successful installation of the latest debian testing amd64 kde CD-1 iso, the monitor shuts off about 2 seconds after passing the grub2 menu while computer remains powered.
View 7 Replies View Relatedthis happens with both VLC and Totem, when in either of those programs playing a video, if I click on one of the top menus, say View in Totem, the video stays on top of the drop down options. In order to see the options I have to hover over them with the mouse at which point they become momentarily visible. I read a post somewhere where someone had a similar problem and it was solved by reinstalling Compiz, but I've tried uninstalling it entirely, reinstalling it, etc. and none of it works. It doesn't happen with flash videos in firefox, it does happen with visualisations in Totem, and it only started happening since I upgraded to 11.04.
View 4 Replies View RelatedKrusader (v1.90.0 in Gnome) is awfully slow when entering .7z archive; how to solve it?
View 7 Replies View RelatedDoes anyone know how to start up Krusader in root mode when using Gnome? If I run it from the "Krusader Root Mode" icon, it does not ask for the root password and opens up in standard mode. I do not want to run my gnome session in root mode, since firefox will not run in root mode.
View 6 Replies View RelatedI user krusader for ftp, but it cannot remember remote passwords. every time i connect to the remote site i am prompted for the keyring password and after that the remote password. even if i tick "remember password", next time the password is asked.. why does it do that?
After upgrading from 10.04 to 10.10 krusader plays annoying sounds if i enter wrong password. sounds are disabled in gnome, but i know that krusader is an alien guy. how to tell him to keep quiet? why did sounds come with 10.10 ?
I'm trying to set krusader as my default file manager. I have gone into System Settings > Default Applications > File Manager and changed Dolphin to Krusader.
When I plug in a flash card the Device Notifier pops up and I click on the device inserted. The choices I get are Digikam, Dolphin, and Do Nothing.
I click on "Dolphin" (hard coded it appears) and it looks like Krusader tries to start. I get the cursor with the bouncing krusader mini-icon and an entry in the panel, but then nothing happens. It all goes away and I'm left with a blank screen (wallpaper, actually).
I've chosen Krusader from the menu, so presumably the arguments to it are good. I have KDE 4.3.3 and krusader 2.0.0.
Running slackware-current
The krusader slackbuild crashes on my machine with the following error, see attached.
I have just upgraded to Lucid on Ubuntu. I am a long time Pidgin user. I tried using Empathy with Gwibber, but I can't get Gwibber to update my IM status(es) in Empathy, so I want to go back to using Pidgin. (Additionally, I can't get Skype to work with Empathy.)I installed pidgin-microblog and pidgin-mbpurple, and they allow me to view my Twitter feed in Pidgin and update my Twitter status in Pidgin. However, in Karmic, I was also able to specify certain "status availabilities" (one named "Twitter-Available" and one named "Twitter-Away", for instance) to have the IM status message for these statuses become populated with my Twitter feed. This capability seems missing in pidgin-mbpurple in Lucid (and it seems to be the only thing missing from Karmic).
Is there a way to have pidgin-mbpurple update certain "status availabilities" in Lucid (and I'm just missing something) or is this no longer possible?Equivalently, is it possible to have Gwibber update my status message in Empathy? (I just want to be able to update my status once on one of my three computers - and have it propagate to all my other accounts (IM and social networking) and computers).
Krusader crashes immediately on start-up at Karmic. This is new. Only changes to my system lately was a routinal FSCK while booting. This is the error message I get:
"Application: Krusader (krusader), signal: Segmentation fault
[KCrash Handler]
#6 0x0808aa88 in _start ()"
I thought about trying to reset Krusader's settings. I don't know where to locate them. I would expect a .krusader folder unde my home dir, but it's nowhere to be found.
Can Krusader play .wav to notify the file/dir copying is finished?
View 1 Replies View RelatedIn krusader (root mode), I want to edit a plain text file that can only be edited as su. When clicking on the file opened kwrite before, now I get this krusader error message: "KDEInit couldn't launch 'usr/bin/kwrite' OK"
Why is this happening? What's wrong? I've found that this problem begins on the second try to open the file-- for the first time clicking on it, kwrite opens it for editing but not on tries following the first one made in the same computer session. Rebooting fixes the problem but only for the first new opening of the file.
This started after my upgrade to 11.3, if I remember correctly. I may have it slightly wrong because I don't drag & drop copy every day, but it's close. Also, it happened to my laptop & desktop both.
I use fish & Krusader to manage some 50-60 servers and it's a dandy app. But now, when I try to copy files to remote servers, I get the following error. I tried it with Konqeror. I tried it with sftp instead of fish. Same results every way.
I've tried searching, but it's not an obvious error message to search for. I'm flummoxed. And sorta frustrated. Linux would be so slick minus these irritating regressions. I had been using WinSCP / Putty, but the Terminal / Krusader I like much better --- except that WinSCP always works.
Here's the screenshot of my error. You can't see it through the blur, but the part that is baffling is that the top line says something like:
this action will overwrite fish://root@server:2222/ with a newer file fish://root@192.168.5.10:2595/.asterisk_history. Notice that the remote server doesn't even HAVE that file on its system.
Selecting Overwriting just freezes Krusader.
In the Release Notes for Jessie, it is stated that webkit browsers do not receive security updates in a timely manner and so are not secure. It is recommended that one uses a gecko-based browser or Chromium for 'general' web browsing. Yet I haven't read anything about this elsewhere and I'm guessing a lot of people don't read the Release Notes, so perhaps it's only something I would only need to worry about if I worked for MI6?
Anyway, Chromium and Iceweasel are becoming far too sluggish for my computer. I would want to experiment with Konqueror, Midori, Epiphany and Opera, but don't want to do anything insecure. I'm of the understanding that without Mandatory Access Control, exploits in applications often allow attackers to access all of the user's files; I want to avoid that.
On the Opera page on Debian Wiki, it says 'Opera is a non-free (proprietary) software. It isn't supported by Debian. It's probably wiser to use a supported web browser ! '.
I just installed ubuntu 10.4 and when I close my laptop, it does not go to sleep. The hard drive is still on and the computer is still working even after I have closed it.
View 9 Replies View RelatedHaving woken her up, she is often very bleary eyed with no energy and little movement. It takes her quite a time to be fully functional. Are there any settings that reduce the time between waking up and full efficiency?
View 6 Replies View RelatedI was using wicd on a spotty network, the house blocked a lot of the signal from moving around, so wicd was having major issues with that AP. Later I was trying to connect to another AP but wicd couldn't connect plus it was saying the spotty network's name was the one it was connecting to. Although I didn't try before I left/gave up I'm sure a restart of the wicd daemon would have solved it.
But why is this even the case? is there something I could add to the scripts that would clear this issue up? (I also submitted a bug on wicd's launchpad project but haven't gotten any response... I hope this isn't a 'feature')
I am currently running Debian Jessie with the Xfce DE.
I recently decided to replace the Xfce window manager with i3. Running Code: Select allsudo apt-get remove xfcwm unfortunately caused a lot of very necessary software to be listed as "no longer required" because they were installed automatically with xfcwm; reinstalling xfcwm did not fix the issue.
I would like to know how I can list these packages as "required", or at least as not automatically installed. I tried using
Code: Select allsudo apt-mark unmarkauto
But this only seems to work one package at a time, and there are simply too many packages for this to be a convenient solution.