Debian Multimedia :: Disk Corruption On New Install
Mar 7, 2010
I installed Debian Lenny on a friend's computer which is an older Dell workstation. The install went well. I delivered the machine last week, got it set up in there house and all was fine. 2 days later they said it crashed with a black screen and lots of words they didn't understand. I get there today and rebooted. X would not start but it ran a whole bunch of automatic self tests but could not recover. I was able to log in as root and run fsck. That made the necessary repairs. I was able to reboot and log into the KDE Desktop. Hopefully they don't break it again.
I asked them what they did to it to cause it to freak out like that and they had no idea. So, as to my question, what causes something like that? I know there must be a log file somewhere on the computer that will give me some insight into the matter, but I'm not sure where to find the file.
View 1 Replies
ADVERTISEMENT
Feb 1, 2010
I have a desktop PC which initially had the Intel D946gzis mobo, its chipset as video controller, some RAM and so. There I installed Debian without a problem alongside WindowsXP.
I've bought an ASUS HD 4670 video card, installed it on the PC and now the installed Debian does not work, while the Ubuntu live CD refuses to run no matter if I set acpi, apic on or off... it throws me some low memory corruption at position just like shown here. With normal configuration, Debian throws kernel panic (keyboard lights blinking). Anyone have faced this before? Ideas? Thanks!! (meanwhile, debian hides in a virtualbox :'( )
Edited: Tried Ubuntu 9.10 x64 (due to the fact i've a core2duo at 2GHz) and it throws a kernel-panic to me (flashing caps and num LEDs). On screen, can be read different lines with things like:
[ 1.957161] [] rb_erase+0xd6/0x160
[ 1.957266] [] page_fault+0x25/0x30
Could it be something about this new video card having ddr3?
View 1 Replies
View Related
Jan 14, 2011
While using my computer the other day (I was sending an email) it suddenly turned off. I didn't get any low power warning, but I was running on battery and had my iphone charging from a USB port.
As I didn't think there was low battery, I just turned it back on again. As it was booting I saw the battery light flashing, indicating low power. I went to get the charger, but before I got it, mid boot-up it turned off again.
This seemingly damaged something hard-disk-wise.
Upon turning it on again it dropped into busy box with some message similar to this:
Quote:
No init fount. Try passing init= bootarg.
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu7) built in shell (ash) Enter 'help' for a list of build in commands
(initramfs)
That's not the actual message (copy pasted from another post) but the message is VERY similar to that.
If I "exit" busy box, I get a load of message about "kernel panic" before it freezes up.
I have booted a live USB (what I am using now). I thought since it wasn't cleanly unmounted, simply mounting and unmounting would do the trick. I was wrong.
Code:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code].....
I had previously ran e2fsck (after checking it was unmounted) but it wouldn't run also because it was reporting that the device was already mounted, busy, or being exclusively used by a process.
I don't want to do any more for fear of causing further damage.
I am astounded that such damage can be caused so easily!
View 9 Replies
View Related
Feb 12, 2011
I'm facing a big problem with a corrupted disk on my wife's computer after she hard resetted the box after it froze up solid.Upon restarting it dropped into Busybox reporting something like
Quote:No init found. Try passing init= boot arg BusyBox v1.10.2 (Ubuntu 1:1.10.2.2ubuntu7) built-in shell (ash) (initramfs) ...This is VERY similar to a problem I had just a few weeks back with my own computer - see this thread for details of that. From that problem I learnt a lot, so I thought this would be quite straight forward, but I've ran into problems.The first thing I did was get a live disk, I chose Ubuntu Rescue Remix. It's a command line interface, which I am ok with, but I can't copy/paste the outputs here....so I am currently downloading System Rescue CD.sda1 is the root partition, it is corrupted. I used dd to make a back up of that by mounting sda7, and dding the whole partition image into /mnt/sda7/sda1.img .This seemed to complete properly, but, when I ran e2fsck on that img file, it wouldn't complete, throwing up a lot of errors.
Code:
ubuntu@ubuntu:/mnt/sda7temp$ sudo e2fsck sda1.img e2fsck 1.41.12 (17-May-2010)
Error reading block 2129920 (Invalid argument). Ignore error<y>? yes
Force rewrite<y>? yes[code]....[code]....
When I download and boot into System Rescue CD, I'll be able to run some more tests, in the mean time,I really want to save this disk otherwise my wife will be back on Windows permanently.
View 8 Replies
View Related
Feb 9, 2010
I have been having problems with filesystem corruption on my eeepc 1000H for a long time now. I have tried using different filesystems, kernels and distributions (arch, slackware) to no effect. I am starting to grow suspicious that this problem lies somewhere else, as I haven't seen anyone else having similar problems in such a variety of scenarios.
I have tried testing my ram using memtest86+, didn't come up with anything after a full run through. I also have tried using e2fsck -c to check for bad blocks, it finds none. I had a go at using smartctl but wasn't really sure what I was doing. I did a long test and it came up with nothing anyway.
This problem is in addition to the problems I've been having with my intel graphics chip and KMS. A lot of the time there are lockups when booting into X, which can only be gotten out of by a hard reset. This is sometimes what causes the original filesystem errors. I've stopped messing around with KMS for now to eliminate this but my current system in unbootable. I'm guessing my disk is wrecked but have as yet seen no definitive proof. Can anyone recommend anything that I should do?
I am currently on ext4 with a custom kernel 2.6.33-rc6 (the stock kernel shipping with slackware does not have the elantech extension for psmouse included). When I was using arch, I was just using the stock kernels.
View 9 Replies
View Related
Nov 25, 2015
DE: lxde
version: Jessie
using xorg file: no
After changing my video cards from gigabyte HD5450 and saphire X550 to two saphire r7 240s one of my debian installs no longer supports rotating the monitors either with 'Monitor Settings' or xrandr. The only difference between these 2 Jessie installs is that one was upgraded and the other one was fresh. The problem is with the upgraded one. On the fresh installed debian I just put the ati proprietary driver so I won't do further testing on it but xrandr was working fine on it before that.
I tried going over the ATIHowTo [URL] .... and everything looks good. Tried purging the non free firmware and reinstalling. I verified the version numbers of libxrandr2 and kernel of both installs. It is either some scrap left over from wheezy or a configuration file I am not aware of.
So what actually happens is xrandr does not say anything, blanks out all windows on the screen with only their background color and title bar showing, changes the lxpanel to its background pattern except for 2 blanked out boxes almost to the right of the screen( I have 10 tray icons there before it blanks), activates the screen I wanted to rotate with the proper rotation. On my main screen I can't click on anything. On the rotated screen I can right click and I get my openbox right click menu like I do on my main monitor before the command but when I try to run something nothing happens. The only way I can get out of this situation is to go to ctrl-alt-f1, log in as root and type 'service lightdm restart'.
Both of these monitors are connected to the primary video card, an ati r7 240 saphire. The main one is on vga and the other one is on DVI. I also have another monitor connected to HDMI but it's not being used. I have yet another monitor connected to the VGA of the secondary GPU I don't think it's a problem is it? I tried not using 'xrandr --setprovideroutputsource 1 0' and it still did the same thing.
I tried just launching openbox with no LXDE and it did the same thing.
Also another strange thing is when I stop the lightdm service and try to 'startx' or 'xinit' my screens go blank; numlock, control-alt-delete and control-alt-f1 do nothing and the only thing I can do is an emergency REISUB. I didn't configure this install to use startx or xinit yet but should it really lock up my system?
On the affected system my script looks like this (I already did this step by step and the 'rotate left' line is causing the problem):
Code: Select allxrandr --setprovideroutputsource 1 0
xrandr --output VGA-0 --primary --mode 1680x1050 --pos 0x0 --rotate normal
--output DVI-0 --mode 1680x1050 --pos 0x1050 --rotate left
--output HDMI-0 --off
--output VGA-1-1 --off
lxpanelctl restart
Additional info:
Code: Select all$ inxi -G
Graphics: Card-1: Advanced Micro Devices [AMD/ATI] Oland PRO [Radeon R7 240]
Card-2: Advanced Micro Devices [AMD/ATI] Oland PRO [Radeon R7 240]
Display Server: X.Org 1.16.4 drivers: ati,radeon (unloaded: fbdev,vesa)
Resolution: 1680x1050@59.88hz, 1680x1050@59.95hz
GLX Renderer: Gallium 0.4 on AMD OLAND GLX Version: 3.0 Mesa 10.3.2
[Code] .....
View 14 Replies
View Related
Jun 14, 2011
Found this 'Startup Disk Creator' in Ubuntu,it is useful,how we get it install in Debian Squeeze? There's a Unetbootin for Debian,but it pull in lots of qt stuff,I don't like it.
View 2 Replies
View Related
Jan 29, 2011
While trying to boot into the normal user the system aborts the login and tells me that /home does not have write permission.
The login manager gives:
Code:
If I log in as root and do a
Code:
Or to open some files, it works and no problem seems to exist.
All this happened for the first time after running luckybackup to fusion the old files of one home directory under EXT4 with the new files from my notebook (ext3, Opensuse 11.1 KDE3) in order to come to a unified home. But then the system did not boot any more. I tried to change the owner but some files did not have write access (not even as root, "the file does not exist"). So I thought I might have a a file system problem.
So I thought: unmount the /dev/sdb1 and then do a fschk on it. Runs and was perfect. So I did run it with forcing to control inode per inode.
No error.
So I thought: you screwed up the system. I then decided to reinstall OpensSuse11.3 from the scratch and create the same user for home. I formatted the rest (/swap /boot /root) and left only /home. Installation runs brilliantly, all ok, it comes to the login..................
Code:
View 9 Replies
View Related
Mar 10, 2010
I down loaded Debian 5.0.4 and burned it to CD (several times I might add till it was right) and now the computer I'm putting it on wont acknowledge it as a boot disk and load. It does not have a problem with my windows cd, which has a crack and the start of all my problems, But not the Debian CD-1 disk. what now? The computer is an IBM thinkpad a22p. Everything works as far as I can tell. But I was going to reinstall Windows and failed in that because of a small crack on the edge of the disk that stopped the install and any hope of accessing the file on the laptop. Microsoft does not support windows xp any longer, you must buy windows 7, but the ibm will not run it due to processor speed and ram limitations. But it will run linux and I'm willing to try it just to get out of microsoft control.
Idon't know what else to do. This is the link to where I downloaded the software ( [URL] ). The others five that i downloaded were on the same page that I got this one. Are there bad files here? Is there a missing file in the disc?
View 4 Replies
View Related
Jan 30, 2011
I have a problem with my partitions being shrunk after VirtualBox PUEL 4.0.2 install. I tried VB OSE, loaded XP Pro and all necessary programs and realized it does not support sharing of folders. I then removed it and installed PUEL with XP Pro and all the same programs. The USB would not work in PUEL so I removed it and installed it as root to see if it would access the USB's. Halfway through the install it hung and gave me a space error.I cannot get the space back from whatever VB did. I deleted the .vdi's and all VM's and reinstalled VB PUEL to see if I could recover it. Nope. Then I tried GPARTED to try and reset whatever is reading the sizes incorrectly.sudo df -Th gives me:
paul@mobile2:/$ sudo df -Th
[sudo] password for paul:
Filesystem Type Size Used Avail Use% Mounted on
[code]....
View 2 Replies
View Related
May 22, 2011
I have 2 questions of which i can't find any answers to.
1) every time when i download something using lottanzb, lottanzb doesn't unpack the files automatically. It happens to every download. [URL]..0dselectie001p shows the full folder where files are downloaded in.[URL]..shows what happens to the par2 files.I don't know what is going on and why lottanzb is doing all this.
2)I have a external disk divided in 3 partitions. 1 partition is a partition for my email program (Icedove) whit all the necessary files. Since a few days i noticed that i first have to access the external disk and/or partitions before it is "active". I.e.: when my pc is started up and i start Icedove, i don't see my mail and all the (sub)folders i created (all the mail is on a partition on the external drive). But when i first access the partition containing all the mails and then start Icedove, then i see all my mails and (sub)folders.
View 11 Replies
View Related
Sep 11, 2011
I am trying to configure my test Squeze install on an older PC with LXDE desktop, and I can't seem to find anything which would enable me to mount a floppy.Then I tried to use the konsole as root mount -w /dev/fd0 /media/floppy0
But although this device and this mount point exist, nothing is mounted. I double checked with various floppies which I know have data on them and none of them are being mounted. The umount command would I expect be umount /media/floppy0 /dev/fd0...I tried searching the web and this forum and didn't find anything helpful. Can anyone help?
View 2 Replies
View Related
Jun 10, 2015
I would like some info regarding an external backup hard drive I use. This carries a lot of text and sound files that I need frequent access to, and I would like to be able to quickly search on that drive using the standard GNOME tracker search facilities. The drive is connected via USB and mounted to /media/hhrutz/Mnemo2.
I have the following questions:
- the database is maintained on my laptop's harddrive in $HOME/.cache/tracker and $HOME/.local/share/tracker/data, correct?- therefore, it would not be a problem for the tracker to update its data if I decided to mount the harddrive in read-only mode?- is it possible to get an overview about the size of the database?- do I have to keep the button "Include removable media" in the "Indexing Preferences" checked?
In other words, is this harddrive understood as a removable media?- if so, can I exempt this drive from "Garbage Collection". That is, I generally do _not_ want to index for example USB thumb drives and such, so I use the default 3-days expiry settings. Does that mean, all the gathered data from my backup harddrive will be gone if I don't connect that drive every two days? Can I prevent that? Because the indexing takes extremely long
I also notice that while the tracker is spinning my harddisk, it doesn't ever seem to advance. It stays at "1%":
> 10 Jun 2015, 18:03:25: 1% File System - Crawling recursively directory 'file:///media/hhrutz/Mnemo2'
View 0 Replies
View Related
Jan 6, 2011
I'm banging my head against the wall as I can't find a way to install the contents of the CD-26 image of Debian. I've downloaded the files and then burnt it to disk and Debian can see the disk as an ISO format, but I have no idea how to extract/install the files so that I can then use aptitude to load the program I want.
I've searched Google and it talks about Debian Installer, but I haven't got that (I don't think), and the CD doesn't load automatically at start up (even though the BIOS is configured to Boot from the CD drive first).
How to I install these other packages?
View 6 Replies
View Related
Oct 8, 2010
would have marked the last thread as solved, but couldn't find where to do it Got it up and running, dual-boot, and no problems after scandisk, and fujitsu helped out. Now I have XP and Debian lenny. Here's where the hard part comes in, for me anyways. Had to do install without NIC, install didn't find it. I have the driver disk for it, with a linux driver on it, but I can't find anything about how to use it.
The driver file has 5 files inside it. 1) Makefile 2) sr9600.c 3) sr9600.h, 2 readme's and a file containing some .png files. I can't find a substitute driver for the card, SUPERAL semiconductor sr9600, that may be already on the stuff I can get using aptitude, so what do I do with this driver...how do I get the system to use it? I NEED networking, a tutorial or some good advice,.. I've googled everything I can think of.
View 2 Replies
View Related
Mar 16, 2010
I am trying to install dynebolic multimedia studio on my hard disk. As per the instructions i copied the /dyne directory into the /(root) of my partition filesystem and booted from dyne cd but it is not working.they said cd will be automatically ejected during first phase of booting but it didnt It continued to read from cd.What should i do next.
View 1 Replies
View Related
Sep 20, 2010
for a project I am working on, I need the same install configuration on every machine, and I'd like to have all the packages I need on one disc, with none of the ones I don't. I also need to use a non-standard file systems(jffs2,nilfs) as the hardware end of my project works on flash memory, and would like these two FSs to replace the typical magnetic disk based choices.
View 1 Replies
View Related
Feb 11, 2011
how to install from hard disk?
View 2 Replies
View Related
Mar 10, 2013
I have tried to install Debian from various .iso files over the last couple of days. However, the installations always get stuck on "Partition disks" section. On the screen, the progress bar for "Starting up the partitioner" keep getting stuck at 50%, and refuses to progress further. I understand that it might take a little time to scan the hard drive, so as an experiment, I left it on over night. However, it is still stuck there when I woke up 6 hours later.
View 8 Replies
View Related
Dec 31, 2010
Where's the Testing Desktop Install CD? As I look at the Debian site the only choices I see are the massive full disk set, or the net-install CD's (url). The last time I tried to use the net-install method I got complex warning messages that a different kernel was installed--along with cryptic instructions I didn't understand. So where did the single CD, Desktop install disk go for testing?
View 4 Replies
View Related
Feb 9, 2010
On getting Debian for install, what's the main difference between the CD installation disk and the multi-DVDs?
View 6 Replies
View Related
May 4, 2010
I scored a Dell poweredge 6300 from a local pawn shop. It has the capability to boot from cd-rom, but apparently not with isolinux, which is what the debian installer cd uses. I was able to boot to UBCD411 (Ultimate Boot CD, which uses syslinux), but didn't see any option to boot to a CD (maybe I'm missing something here?). I tried using the boot floppy from this site. I didn't expect it to work (it's from the Woody era), and it did not. I got a message that says SYSLINUX ver.XXXX CBIOS boot failed. I went to [URL].. and looked for a boot floppy image for Lenny, but apparently it doesn't exist. I did however find the boot floppy image for Etch.
To be honest, even if I did find the Lenny floppy boot image, I'm not sure how to use it to point the system to the installer CD. So, I have two questions:
1) Does anyone know of a boot floppy image for Lenny, or if I could use the Etch boot floppy image?
2) How would one boot from floppy, then point the system to the installer CD?
System info:
(4) Xeon Pentium 2 processors 500 Mhz
(6) UltraSCSI hard drives
(1) SCSI cd-rom drive
(1) SCSI dvd-rom drive
(1) Floppy drive
(1) 10/100 NIC
I'm open to any other suggestions as to how I could install Debian Lenny on this machine.
View 5 Replies
View Related
Feb 18, 2010
i am not talking about the network install, i am talking about the installation disk you use to install debian lenny, when i go to a mirror (my computer architect is i386) i see like more than 30 cd images, no different version numbers on each of them just the same version but with several disks, do i only need one or do i have to download them all
View 7 Replies
View Related
Dec 30, 2010
I'm getting a bit tierd of linux right now.. I can't get the CD, with netinstall on, to start.
I've tried different harddrives and burned it several times at different speed and so on. I've tried to just i386 and amd64, both gives the same error:
isolinux: Disk error 32, AX = 42B0, driver 9F
The harddrives that I got is small 10-80 gb, so they are a bit old.. but they worked the last time I've tried to install (until I got a grub loading error)
I'm not sure what to do at all. Tried to search on google and here without finding something
View 4 Replies
View Related
Jul 18, 2011
I'm trying to install debian-6.0.2.1 from hard diskand it can't find my iso image wich is on the slackware partition.i downloaded initrd.gz an vmlinuz,added some lines to lilo.conf so that i can boot but then when it searches for the iso image doesn't find it .
View 6 Replies
View Related
Sep 8, 2015
I'm trying to upgrade my Win8/Wheezy 64-bit machine to Jessie 8.1 by installing from the amd64-bit netinstall iso image on a USB flash drive. I had done the previous, Wheezy, install on a disk partition that was whole-partition LUKS/LVM drive, with separate logical partitions for swap, root, and home.
Before doing the upgrade, I booted to the BIOS to ensure that my UEFI system had the correct, CSM and Legacy modes enabled in it, so that installer would boot using the non-efi BIOS mode.
Step one of the upgrade was to boot the netinstall and enter the rescue mode so that I could manually do the cryptsetup/LVM business. When I returned to the installer, I mounted the now-recognized logical partitions normally, choosing to format only the swap and / partitions.
During the entire process, I had to go into rescue mode one more time to manually mount the unencrypted /boot partition, along with my /home partition. I copied a backup of my old /etc/crypttab from the latter, and after returning to the installer, finished the install. That finish included installing grub on my hard drive's main boot partition.
Everything seemed to finish with no problems. However, when I try to boot the debian bootloader, I get tossed to grub rescue with the message that '/grub/x86_64-efi/normal.mod' doesn't exist. At this point I returned to the installer, mounted the /boot partition, and saw that there grub-install didn't create that an x86_64-efi directory at all. Instead, it had created an i386 directory. The exact name escapes me at the moment.
I *think* that my install was clean other than the last bit that was related to installing the bootloader. How to reinstall the bootloader in such a way as to make all of this work.
View 2 Replies
View Related
Mar 15, 2010
I have now almost completed my aim of using Debian and PClinuxOS on different installed hard disks. For PCLOS I use an On-Disk set of disks which I have installed on a separate hard disk which serves as a repository from Synaptic, which makes program install/remove very quick. Is it possible to do the same thing with the 5 DVD's for Debian lenny on another hard disk?
View 2 Replies
View Related
May 15, 2010
Simple question, which implies lot of complexity, unfortunately : how to install Clonezilla and mount multi-partitions cloned image disk under DEBIAN ?
Wishing that one day Linux would be so easy and complete as Windows. But we are gaining more users, so Linux will have more apps
View 5 Replies
View Related
Feb 17, 2016
I received the following error when I got home from work today. If this was a windows environment, my first inclination would be to boot off my dvd and then run a chkdsk on the drive to flag any bad sectors that might exist. But there's a complication for me.
Code: Select allThis message was generated by the smartd daemon running on:
host name: LinuxDesktop
DNS domain: [Empty]
The following warning/error was logged by the smartd daemon:
Device: /dev/sdc [SAT], 1 Currently unreadable (pending) sectors
Device info:
WDC WD5000AAKS-65V0A0, S/N:WD-WCAWF2422464, WWN:5-0014ee-157c5db9a, FW:05.01D05, 500 GB
For details see host's SYSLOG.
You can also use the smartctl utility for further investigation.The original message about this issue was sent at Sun Feb 14 13:43:17 2016 MST.Another message will be sent in 24 hours if the problem persists.
From gnome-disks
Code: Select allDisk is OK, 418 bad sectors (28° C / 82° F)
I did a bit of reading and it seems that most people suggest using badblocks to first get a list of badblocks from the drive and save it to a file. Then use e2fsck to then mark the blocks listed in the badblocks file as bad on the hard drive. My problem here is that this drive is part of a RAID5 array that hosts my OS. I wanted to confirm if this was still the correct process.I boot to my Live Debian disk, stop the raid array if it's active. Then run badblocks + e2fsck commands on the drive in question and then reboot.
View 1 Replies
View Related
Nov 3, 2015
I installed Debian on my PC with a Acer Stock motherboard (xc600) with amd64 and after the installation finished it told me to remove my installation media and reboot. After reboot I was returned this message ' ERROR: No boot disk has been detected or the disk has failed.'. I have verified with gparted using mint live OS that I have Debian installed on my system.
I got believes that this may have be caused by a broken grub or I need to configure something I don't know how in BIOS.
I will update the topic later..
My installation media was a USB 2.0 flashdrive with a Debian 8.2 Jessie Installer and 9 different Linux distros. I have installed Debian multiple times before on my laptop and never had this problem so I know how to go through the installation process and set the partitions.
View 3 Replies
View Related
