I just put ubuntu 10.10 on my HP Pavilion dv9000, and it's been working well for the past few days, but just recently the touch pad stopped working, even when it's on. My usb connected mouse works. What should I do?! I need this resolved now.
View 7 RepliesLaptop is of the Lenovo 3000 Y500 series, 32bit processor. Touchpad does not respond during the installation.Worried if the Touchpad won't work even after the installation..Currently using Windows7.
View 2 Replies View RelatedI have a lenovoY-410 laptop ,on which i tried to install Fedora11 , however my laptop's touchpad does not work for Fedora11 , however it worked well for Fedora10
View 6 Replies View RelatedI just installed Debian on my new VAIO VPCS13. It seems to be working for the most part, except it does not recognize my Synaptics touchpad at all.
I've had Ubuntu installed on this computer before and the mousepad worked fine. This being Debian on a new-generation computer, it makes me think that Debian just probably hasn't released the update yet.
I couldn't find a place to post Cent OS questions so don't bite if this is in the wrong place
I have a KeySonic 2.4Ghz Wireless Keyboard with Integrated TouchPad which I am trying to get to work.
Now there are some reviews saying it works straight out the box on Linux. This was almost the case for me.
The keyboard works straight away but the touch pad doesn't work at all not even the mouse buttons
I am running CentOS release 5.3 (Final) Kernel 2.6.18-128.el5
I would really appreciate any advice at all, I have checked the output of: cat /proc/bus/input/devices
Which gives:
Code:
I was going to render the video that i made last night, and then in the morning, My ubuntu 10.10 boot normally, but when in the Ubuntu plymouth(the ubuntu logo with 5 dots) showed,there are text told me like this Code:Keys: Press S to skip Mounting or M for manual Recoverysince that moment my keyboard and touchpad are not working, but ifi use an external keyboard and mouse it would working flawlessly, note that i don't have an external keyboard.i'm trying to boot into recovery mode, my keyboard is working very good, but i don't have any idea what is the problem.
View 9 Replies View RelatedWhat can I do to disable ONLY the LEFT touchpad button on my laptop? Left Click sticks by itself randomly, this causes problems when using my USB mouse (such as permanent dragging, permanent highlighting, permanent inability to left click anything, the computer is pretty much dead to me unless I try to tab around), it also causes issues with the Tap to Click, and it also causes Ubuntu to not recognize my "Left Handed" mouse button set up after boot for ONLY the touchpad. On the USB mouse, buttons work swapped.
Current solution: Left Handed Button Swap. Touch pad to click. Right touchpad button to right click. Sometimes I use my USB (which does recognize the swap). This is the 3rd install of vanilla Ubuntu (tried it just in case). That's not the issue. This is a Dell Inspiron 6000. I want to just disable the left button on ONLY the touchpad, I don't want this to affect my USB mouse. I want to keep the right button touch pad working. And of course I want my mouse to work. But, actually, my ideal is to sacrifice the left button, use Tap to Click, and use the right mouse button for right clicking. If I can't save the right click, can I disable both buttons?
how I can activate and deactivate the laptop touchpad?
View 8 Replies View RelatedI have an Asus K6LIC laptop. In Windows if I press function+F9, it toggles my touchpad on and off. I'm wondering if I can get this functionality in Ubuntu 10.10. All other function keys work, except for this one. The only thing I can find is to permanently disable the touchpad, which is not what I want to do.
View 3 Replies View RelatedHow can I get the cube rotation on a laptop with a touchpad? I love it on my desktop at work, really gets a great "WOW!" when people see it in action.I have the CSSM and extras installed, but can't figure out the keybindings with the touchpad.....
View 4 Replies View RelatedI've just installed 10.04 on a Samsung RV511 laptop. No problems and much, much better than the Windows 7 it came with. But I do have just a little niggle. I can disable the touchpad with 'modprobe -r psmouse' after I've logged in, but I would like this to happen automatically at startup. I've tried putting the above code in the home folder .bashrc, but I get this error message: FATAL: Error removing psmouse (/lib/modules/2.6.32-31-generic/kernel/drivers/input/mouse/psmouse.ko): Operation not permitted Do I need to write a bash script file? Or how else can I get the code to run as I want?
View 9 Replies View RelatedI am trying to disable the touchpad and when I try to run synclient -l I get
synclient -l Couldn't find synaptics properties. No synaptics driver loaded?
My xorg.conf follows:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
[Code]....
I also have an option in BIOS to disable touchpad when external mouse is plugged in, which I enable without any result.
Can anyone tell me how to turn off touchpad clicking in OpenSuSe 11.2?
In 11.1 it was done in the Xorg.conf file but 11.2 does not have this file.
Installed Debian recently and my Laptop touchpad isn't giving me a click when I tap it. Gpointing-device-settings has tapping unchecked. Using a Dell Mini 10v.
View 3 Replies View RelatedInstall Debian Squeeze onto Thinkpad T410. Got the basic things working and noticed that - movement of touchpad results in moving of mouse pointer, which is correct, but - tapping on the touchpad does not simulate a click action. Confirmed that the touchpad hardware is working by booting into a CrunchBang LiveCD. how I can enable the touchpad tapping action?
View 2 Replies View RelatedSetup:Ubuntu 10.04 recently upgraded from 9.10Dell Precision m63004G RAMCore 2 DuoDual Monitor with laptop=screen0 monitor=screen1external mouse and keyboardIssue:In both 9.10 and 10.04 (I am just now trying to solve the issue) the setup works great, but not flawless.External mouse and keyboard work with no issue.The touchpad mouse on the laptop, however, will not switch from screen1 to screen0. It works fine on either screen and will go from screen0 to screen1, just will not return. One has to hook up an external mouse to get the cursor back onto the laptop screen0.
View 5 Replies View RelatedI have an HP 8460p laptop and have installed Debian(!) Squeeze. The Synaptics TouchPad works, but I am unable to adjust the configuration (primarily pointer speed/acceleration). I have installed package xserver-xorg-input-synaptics according to this Debian wiki page: [URl] My Synaptics device: tyler@titanium:~$ egrep -i 'synap|alps|etps' /proc/bus/input/devices N: Name="ImPS/2 Synaptics TouchPad"
Output from synclient and syndaemon: tyler@titanium:~$ synclient -l Couldn't find synaptics properties. No synaptics driver loaded? tyler@titanium:~$ syndaemon Unable to find a synaptics device. I have tried building /etc/X11/xorg.conf.d/synaptics.conf and restarting but nothing changed: Section "InputClass"
[Code]....
I also examined [URL] and I just couldn't get very far to understand what was wrong, or what I needed to do.
I have installed gpointing-device-settings. It does exactly what I want it to do, disable the touchpad, until I reboot (not sure about logging out/in) and the touchpad is again enabled. So the vicious circle continues and I disable it for the session. Back in the days of xorg.conf it was easy enough to disable but of course that file, and the option to disable from within that file no longer exists for me. When I use Debian I can modprobe -r psmouse. That was a perfect solution as the touchpad was never heard from again with regard to that distribution. Attempting to remove that module under Fedora 15 results in the following.
Code: [glenn@f15beta ~>$ sudo modprobe -r psmouse FATAL: Module psmouse is builtin Is this something that I can change? I assume that built-in means that it's built in to the kernel? How about this angle. When I use gpointing-device-settings to toggle the touchpad on/off there must be one or more files that are altered. How easy would it be to find out exactly what files are altered and could I possibly set the immutable flag on this file so that it never gets toggled back to enabled again? There is a function key on this laptop, F9, that looks like it toggles the touchpad but it doesn't work under Fedora 15. Never tried it in any other releases.
Everything was working fine when my laptop got shut down after a battery failure. Now, on restarting, the computer hangs at the login screen. If I close the lid and reopen it, the keyboard seems to work and I can enter password and login, but the touchpad doesn't work at all and all the functions that were to be performed while holding the function key seems to happen automatically (For eg. when I press 0, another key gets typed). Perhaps the drivers are't getting loaded properly, I don't know. The same story is there no matter how many times I restart. I am using Ubuntu 9.10 and the laptop is Dell Vostro 1525
View 2 Replies View Relatedon my netbook I have a Debian unstable/sid system. A few days ago I did an apt-get (dist-)upgrade which I think also updated the X-Server. Since then my netbooks keyboard and touchpad are not working as soon as the desktop is started (I think gdm).
The Keyboard works during the Grub selection and also in recovery mode (Root Terminal), so I'm sure its not a hardware problem. Could it be that the X-Server unloads the kernel modules for those two devices?Also if I plug in a USB keyboard or mouce they are working.
I have tried to use the extensions toggle-touchpad and touchpad-indicator that claim to be able to do this, but neither will load properly. They show up with a little exclamation-point-triangle in the "Tweaks" panel saying "Error loading extension". How to get Jessie gnome system succeeded in getting their touchpad disabled via a simpe toggle mechanism?
View 5 Replies View RelatedI believe it is PS/2 but I am unsure. There isn't an option in the GNOME interface to edit this, either. Am I missing some sort of GNOME utility, or what?
View 2 Replies View RelatedI have a small issue I couldn't find a solution for. I'm running Centos 5.5 on a Fujitsu-Siemens S6120 laptop. When I boot my system and use the touchpad for the first couple of seconds my mouse cursor jumps around the screen sporadically and also mouse buttons "gets pressed" by themselves (without me actually touching them). After 1-2 seconds the situation becomes absolutely normal - mouse moves good and buttons work only when I press them.
Everything repeats after the reboot.
I see the following error in the system log:
psmouse.c: Mouse at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away
It appears right when I try to use the touchpad for the first time, I guess.
The situation isn't critical, but is quite annoying. Is there a way to get it fixed? I searched the Net, but found mostly issues with mouse loosing sync during operation - such thing never happened to me, as my issue appears only once per boot.
whenever I start my laptop with Ubuntu Installed the startup screen goes strange (fuzzy/block type) then is fine when the desktop appears, but I can't use the touchpad or the keyboard.
Is there a repair option or does anyone know what has happened ?
My hardware is a Gateway LT2104u netbook.Bought it today, took it out the box and installed the netbook version of Ubuntu.Now here is the problem.The touchpad works fine. I am able to move the mouse all over the screen, the keyboard works find too. The problem is with the mouse click. The clicks are recognized when I am in the 'overview screen'. For example I can click on firefox and it opens. However once firefox is open it does not respond to any clicks. Even clicks to close firefox.
I push Alt+f4 to close the program and then I can click into any other (or the original) programs, but once inside the problem replicates.The problem was present in the 'live cd' during install as well.Does anybody know what might cause this? The whole netbook is useless at this point since I need to click to pretty much do anything in most applications (the Terminal program is one of the few exceptions )
my touchpad worked out of the Box after insalling Xubunut 11.04 and did so ever since. But since yesterday it doesn't. It worked when i shut down the laptop and didn't when i booted later. How do i fix this? Yes i read the article about thouchpads.
View 2 Replies View RelatedMy touchpad just stopped working recently. It works in the framebuffer console, cat /dev/input/mice gives sensible output, X -retro shows a moving cross and it is completely functional during the gdm login prompt. But for some reason, it just stops responding halfway through the login process (roughly at the same time as gnome complains about my old laptop battery, if that is any help.) I run Debian Squeeze with Linux 2.6.32-5-686. The touchpad is a Synaptics PS/2 pad according to Xorg.
I do not understand the problem, actually. X seems unwilling to talk to my touchpad for some reason. When I run X manually from single-user mode, it complains that it cannot talk to my touchpad, but it works in the -retro test mode. As soon as gnome kicks in however, it stops working. synclient -l gives sensible output.
My external USB mouse works just fine.
I always edit /etc/default/grub to fix my touchpad issue and make it work on Ubuntu based distros. Recently I have installed Fedora15 and I tried to do the same work on it but I couldn't find the file. Do you know where is it in Fedora?
View 2 Replies View RelatedThis weekend I did a distribution upgrade to Karmic, but it didn't go very well. Upon reboot, I see a white ubuntu logo on a black screen. I hear the speakers pop, and the screen flashes several times, sorta like the blank screen is maybe changing video modes. After a while I see what I think is garbled text but is unreadable, and it looks like I can log on even though I can't read anything. Now, booting into recovery mode gets me to a readable prompt. There are no upgrades to apply. Typing gdm from here gets me to the desktop just fine. Also when booting, if I choose an earlier kernel the system boots fine also, except the touchpad doesn't work.
View 1 Replies View RelatedI initially had W7 starter on this netbook, changed to linux mint 8 very quickly (as fedora seems to have bricked my old laptop ), and eventually decided to try fedora again. However, unlike on LM8, the touchpad and Wireless LAN do not work.
Netbook Model- Acer Aspire One D250-1515
Wireless Card- Atheros Communications Inc. AR928X Wireless Network Adapter
Touchpad- unknown (how can I find this out?)
These two issues kind of make the netbook rather useless as a mobile device.