I'm trying to install debian lenny on a Asus A7V board, with PCI ethernet card containing RTL8139 chipset.I'm using the netinstall cd. Installation fails because the network card is not recognized during the install, thus no DHCP, thus no internet.Kernel is 2.26.x
View 8 Replies
During the installation the installer asked me if my clock was set to UTC. I didn't know what that meant so I said yes. Now whenever I boot into Lenny it messes up the time of day, and since I dual boot with puppy and knoppix on this machine, the time of day is messed up in those systems also. Any idea how to permanently undo the damage in Lenny?
View 14 Replies View RelatedI have tried many variations of the following, but always get the same error.
Quote:
# aptitude install postgresql-8.3
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code]...
I downloaded and installed a fresh ISO and already installed it 3 times in my PC but after a seemingly good installation, my machine would shutdown when I try to boot my freshly installed lenny. It was a good CD. I encountered no error reports while installing but I can't understand why after I click on Debian lenny in the grub, it would act as if it were booting and then suddenly shutdown.
View 12 Replies View RelatedI cant get lime wire installed on my debian lenny. the repositories was changed to contrib non-free, still no go. Cant seem to get any kind of documentation even after 2 days of googling.
View 13 Replies View RelatedJust upgraded from Etch and now I'm stuck at 640x480 resolution. Xorg.conf doesn't show any display modes, and xrandr gives the only resolution as 640x480. The laptop is a Toshiba Tecra 730XCDT. I know its a doorstop, but 800x600 worked fine under Etch. Anyone know how to to change it back? It's really hard to look at right now.
View 3 Replies View RelatedI at trying to get my Intuos 3 installed on Debian Lenny AMD64. I installed both the xserver-xorg-input-wacom and wacom-tools. The problem is that the tablet works like a mouse. I have to press down and move the pen for it to work. In Windows, I can just hover over the tablet without making contact and it will move the cursor. Also, it isn't calibrated to the screen.
I put "wacom" in /etc/modules. Here is my xorg.conf though
Code:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.44 (buildmeister@builder103.nvidia.com) Thu Jul 29 01:52:55 PDT 2010
Section "ServerLayout"
[Code].....
I could not get the hardware to work with Lenny's ancient drivers, so I gave up and decided to upgrade to Squeeze.Well, the hardware works (except sound), but KDE4 is a such a disaster that I want to run not walk! all the way back to Lenny. I'm stunned that after four years of active development, this desktop still doesn't have something as basic as keyboard shortcuts or the ability to place icons where YOU want them.
The widgets frustrate me to no end. The new K menu is impossible to navigate. I'd rather hang myself than use Dolphin as a file manager. KDE4 gives me more notifications than MS Windows' crapware. And it's UGLY !!! The "Oxygen" theme makes me want to tear my eyeballs out.
Been working with this problem for over a week now and has come to a dead end, I have installed pureFTPD with MySQL on Debian 5 Lenny 64bit. My problem is I can't login with the users in the sql-database, but for some strange reason, I'm allowed to loggin as anonymous. Unix users can't login either.
I have followed the guide on: [URL]..
- Created a ftpgroup and ftpuser.
- Created a database ftpd
- Created a user vhosts and given access to ftpd db
My configurations files
/etc/pure-ftpd/auth/30mysql
Code:
/etc/pure-ftpd/db/mysql.conf
/etc/pure-ftpd/db/mysql.conf
[Code]...
I recently installed Lenny but have not been successful using the wireless. have previously used Ubuntu 8.04 where the wireless worked without problems (network-manager).I have also tried to install wicd but that too does not list any available networks. I have presently reinstalled network-manager
lspci:
06:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
iwconfig:
[code]...
I have installed Debian squeeze 6.0.1 using the CD1 of the i686 version (kernel 2.6.32.5) on my compaq presario sr1799es desktop. My machine has a ethernet card RTL8139 (RTL-8139/8139C/8139C+)(it has no wireless card). I can't connect to internet with debian.
I can connect to internet in this machine using windows xp. I also checked with the Puppy linux 5.2.5 version (with kernel 2.6.33.2) using a usb memory and I had success connecting to internet by dhcp. I already checked lots of forums with related questions but I couldn't find a solution for my problem. I'll show you the output of lspci and lsmod !grep 8139 commands:
lspci
00:00.0 Host bridge: ATI Technologies Inc Radeon Xpress 200 Host Bridge (rev 01)
00:02.0 PCI bridge: ATI Technologies Inc RS480 PCI-X Root Port
00:11.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80)
00:12.0 IDE interface: ATI Technologies Inc IXP SB400 Serial ATA Controller (rev 80)
[code]...
i was trying to use gnome and kde but i don't like them. I tried xfce and it seem to fit my needs but.My computer is used to be powered on for a weeks. While time passes, a process xfdesktop begin to use more and more memory and to free RAM i need to log out and log in again.
I tried squeeze yesterday on my virtual machine and it has 4.6 and seem not to have that bug, RAM usage is static(yes it still works when i write this and have memory usage 34492k, which is not changing for an hours of usage already), also 4.6 is MUCH better than 4.4.
i already tried adding squeeze to "sources.list" but i can see too many dependencies which should be upgraded if i install 4.6, i'm beginning to afraid it can crash entire GUI(or entire system, i can see there is libc6 required to be updated).
I'm trying to install Debian/Lenny on a iBook clamshell. I couldn't seem to burn an install CD that the iBook would recognize, so I eventually copied the contents of the CD onto a self-powered USB drive and I can now get the iBook to boot off of that thru open firmware. However, when I get to the Debian installer main menu, it still won't read the CD, and apparently it does not have network drivers to install over Ethernet. Is there any way I can supply a driver for the ethernet interface (lspci reports that its a sun GEM ethernet interface) or somehow convince the installer to install from the content of the USB drive (which is a duplicate of what's on the installer CD)? Heck, if it'd be easier to get the Airport interface running to reach the Internet I'd be up for that too.
View 1 Replies View RelatedI haven't used Debian in 1 year or so and would like to know if there is any possible way to do a fresh installation of Debian Lenny or Squeeze (either or) and not install Exim? I get to the package selection section of the Debian Installer and I de-select "Desktop Environment" & "Standard System" so nothing is selected and it still be default installs Exim. Is there a way to omit this from the install?
View 9 Replies View RelatedI recently bought a new Samsung netbook N310 and want to install dual-boot Debian lenny along with windows xp home edition. My CPU is like this: Intel Atom CPU N270 1.6GHz which architectures and kernels I should download from the cd installation? there are so many:alpha, amd64, armel, hppa, i386, ia64, mips, mipsel, powerpc, s390, and sparc.
View 4 Replies View RelatedHad an old Power Mac G5 (dual 1.6ghz 256MB ram) collecting dust, so I did some research and came upon Debian Lenny. Idea was to setup the mac as a home server to share with Win7 HTPC/OSX 10.6 macbook pro/Ubuntu9.10 dell laptop machines in my house. With so many different OS's running in my house, I thought it would be the ideal solution! Downloaded and installed the Debian on the G5. Now after the fresh install.
I hear the "mac chime." Then I get:
Stage 1 Boot:
This screen loops with a folder and the finder icon w/ a ? mark.... Also, the longer this loops the faster the fans go!
I installed ubuntu on my dual boot Debian/Lenny and windows 7 toshiba laptop. Now when I try to boot Lenny i get the following error messages:
kinit : name_to_dev_t(/dev/sda6)=dev(8,6)
kinit : trying to resume from /dev/sda6
kinit : No resume image doing normal boot ....
[code].....
I can see the whole filesystem is there. The problem may have something to do with the boot loader. I was originally using Grub 1.5 when I just had Lenny and Windows 7, but when I installed ubuntu it has installed GRUB 2. When I use the debian install cd to go into rescue mode, all the init scripts are still where they should be. Another thing that happened when I partioned of a section for ubuntu all the dev numbers went up one. In the debian /boot/grub/menu.lst windows 7 was booting under (hd0,1) now it boots under (hd0,2) debian used to boot from (hd0,7) with root=/dev/sda8 but now it is under (hd0,8) root=/dev/sda9 in the GRUB2 menu.lst. Is there anyway to get my Debian back up and running? After 6 months of studying it at uni I am finally learning my way around and want it back.
I have Lenny installed & it works fine, in a few days will add Windows 7 (want to dual boot - 1 250 GB hard disk) used gparted to free up lots of room for Win 7
- My question is this, Debian then Win or Win then Debian (I want GRUB to manage both so hope since Lenny is installed Win 7 will use the free space no problem) ?
I am trying to install Debian from a USB stick (which was prepared by unetbootin). The installer / kernel loads, and setup runs fine until It searches for a CD-ROM drive. My computer doesn't have a CD-ROM drive, but the net install ISO has been burned onto my USB stick. Is there some way that I can mount my USB stick as the cd-rom drive? it's of type FAT32 if it matters.
View 2 Replies View Relatedcurrently I'm running postgresql-8.3 server on lenny 32 bits. There are also installed some standard packages but in the near future I'd like to install mysql server on the same machine. I believe that 64 bit system will be faster so I decided to change from 32 to 64 bit. how to migrate postgresql database from 32 to 64 bits. I have postgresql data dir on separate volume. Will it be possible if I just use it as it is now in new 64 bit system with the same postgresql server config files or do I have to dump data and restore it in new installation ?
View 1 Replies View RelatedI am thinking of upgrading from my production Lenny to Squeeze.Is it better to upgrade from Lenny directly, or reformat my hard drive and install from fresh (I do have backup of my /home)?
View 14 Replies View RelatedHow can i install Sun Java (JDK) 1.6 on Debian lenny?
make-jpkg does not work with Java 1.6.
I have a question about dist-upgrading. I'm using 5.0 lenny with KDE 3.5 and I want to upgrade, but I don't want to change my KDE to that new version of disaster. Will the apt-get dist-upgrade update my kde?
View 6 Replies View RelatedA week or so ago, I downloaded the current stable and burned it. (lenny)And on the 5th I started installing and finished on the 6th.I then see squeeze was released LOL.I have started using the system and would rather not start over from scratch.(but I will if it is the *best* way to go)I am coming from Ubuntu but I do know my way around the system...
All the threads I see start off by editing the sources list to change lenny to squeezeIs there an easier way?I've looked for a HOWTO but did not see one.I am not looking to stop any part of the system from upgrading.In ubuntu I have gone from distro to distro, but that option is not offered.I checked "Software Sources" -> Updates I do not see the Ubuntu option of allowing distro updates ot be offered.
How can I remove awstats from my Debian Lenny installation, will aptitude remove awstats
View 5 Replies View RelatedI have problem with installing Deluge. I did not find any manual how to install Deluge. And I wanna install deluge newest version, and that is on Debian testing packages. So how can I install Deluge from debian testing packages. I read a little bit Deluge forum and there I see, there is lot of problems with Deluge on Debian Lenny. And all I need is use Deluge from web interfaces, thats all. How could I set it up?
View 6 Replies View RelatedUsing VirtualBox on Ubuntu 9.10. Processor is Intel Q8200 Debian amd64 ISOs should work on my system but I had to resort to i386, which installed flawlessly despite a couple of kernel panics once X started. I don't think the problem is VirtualBox and I'm about to reboot and try loading the CD normally to see if that works.
View 1 Replies View RelatedI'm giving up trying to install Lenny as a server. The netinstall won't recognise my realtek 8139 chipset on the PCI ethernet NIC. I've googled so much i'm freakin loosing it. The install fails while getting an IP adress via DHCP. So a new networkcard is in order. Why not go for gigabit lan then. Which PCI gigabit LAN card is 100% guaranteed to work with Lenny net install cd?
View 3 Replies View RelatedI have tried several times--unscuccessfully-- to upgrade to the testing branch. I change my apt sources to "squeeze". I get either "err" or "ign" on a lot of the sources when updating. I have seen several methods as to how to upgrade from stable to testing and none have worked so far. I have tried "apt-get update && apt-get dist-upgrade" as well as using aptitude to do the same similar commands. What I find is the following:
* My kernel never gets upgraded at all.
* udev is broken and mice and keyboard do not work.
* Many packages are held back and not upgraded.
I do have a debian 5 image to re-install and try again but I am not finding it to be as easy as many debian people claim. Also, I did a fresh install of squeeze using the net-install image. When the install finished and I rebooted, the computer hung on boot up. It never seemed to read where the kernel was. It would boot up, the system would beep and then reboot never finding the kernel or boot block apparently. how to get squeeze on my box? It is a 1.2 Ghz computer with 512mb ram with the intel i810 southbridge chipset I believe.
I just upgraded to lenny (stable) from a working etch system. It went pretty nicely but I'm having a problem with the print system.
Ok, I have an HP Laserjet 4M+ connected to my system by USB. (I have another color printer too and a scanner but I don't use them often).
I use CUPS. I never bothered with the HPLIP packages because straight cups has always worked well.
What happens now is that I'll send a job to the printer and nothing will happen. The printer won't get it. Looking at CUPS on the localhost:631 page I can see that the printer is on, connected, ready; the job is there too but just stuck on "processing".
Now here's the thing. If I manually load the ehci_hcd module with "modprobe ehci_hcd" then the job will make it to the printer and it will print.
I can't just make that module load at boot time because if I do and the printer is off, it doesn't work. (I have to unload it and reload it). For whatever reason, I have to make sure that module gets loaded AFTER the printer is turned on, or nothing gets sent to the printer!
