Debian :: Lenny Xfce On Virtualbox - Can't Change Resolution
Mar 11, 2010
Well I have installed lenny from netinstall, with Xfce on a virtual machine, everything runs smooth and I really like how does it work, I just have a little big problem, the resolution is too high, it is higher than the host resolution, if I have to work in the down part of the screen I have to scroll down in host, it is kinda annoying, under screen config (right click>configuration>screen config) for resolution only the default option is available. I have googled and I have found that /etc/X11/xorg.conf must be modified to use another resolution, but I'm not sure of what to change or what to do exactly.
View 2 Replies
ADVERTISEMENT
Dec 14, 2009
i was trying to use gnome and kde but i don't like them. I tried xfce and it seem to fit my needs but.My computer is used to be powered on for a weeks. While time passes, a process xfdesktop begin to use more and more memory and to free RAM i need to log out and log in again.
I tried squeeze yesterday on my virtual machine and it has 4.6 and seem not to have that bug, RAM usage is static(yes it still works when i write this and have memory usage 34492k, which is not changing for an hours of usage already), also 4.6 is MUCH better than 4.4.
i already tried adding squeeze to "sources.list" but i can see too many dependencies which should be upgraded if i install 4.6, i'm beginning to afraid it can crash entire GUI(or entire system, i can see there is libc6 required to be updated).
View 14 Replies
View Related
Jul 1, 2011
When I try to change the resolution, it only shows 800X600 and 640X480 or something similar, nothing regarding a custom resolution. When I use the "Install Guest Additions" it won't mount because of some error, and so I can't open it, and even if I could mount and open it *I've tried it in other distros that don't automatically install it for you* I have no idea what to use. I've tried all of the .sh, even the autorun.sh and giving it executable permissions, and it STILL doesn't work. Perhaps I'm missing something, or there's a documentation out there that I can't find, but I can never get them to work. How can I fix this problem? I know in sbopkg, there's 32-bit Virtualbox Guest Additions but that doesn't work. The reason why I installed the 64-bit one is because I don't have 6 CDs to spare and I'm almost out of bandwidth and it has to last me a week. *I think around 200GBs out of 250GBs taken up so far, or more*
View 14 Replies
View Related
May 25, 2010
The VirtualBox website have a 64 bit deb for installation available for AMD64 Lenny but not for Squeeze. Is it okay to install the Lenny package on Squeeze or would this cause a problem?
View 4 Replies
View Related
Jul 31, 2010
I have created a squashfs live CD from HD (Gnome - lenny ). It runs like a charm in a "fromhd" mode but when I try the iso or even a burned CD in virtualbox on the same PC, X does not start. It says:
Failed to load module "type1" (module does not exist, 0) /usr/bin/xorg: symbol lookup error: /usr/lib/xorg/modules/drivers//vesa_drv.so: undefined symbol: xf86GTFMode
View 3 Replies
View Related
Sep 2, 2011
I have installed debian squeeze with XFCE following this tutorial:It worked well, but I have one problem: the resolution is not right. How could I change it?The only resolutions that are available right now are 1280x1024, 1024x768, 800x600, 640x780. I have a 19" wide screen, so the resolution should be 1440x900. I couldn't find xorg.conf since it seems new xorg doesn't need it anymore.
View 9 Replies
View Related
Mar 24, 2010
i recently moved away from ubuntu (as they wouldn't let me change my gdm themes lol) i installed lenny usin the net install for ia86 but i cannot change my screen resolution from 1024x768 to my card/monitors native setting of 1366x768 i have included a .txt taken from the benchmark an profile gizmo which i hope rovide any of you with all the info needed (to be honest i don't understand half of it) my laptop is a fujitsu amilo li3710 with dual core, 3gb ram an 160gb hd an a intel gma4500 with shared memory graphics
View 2 Replies
View Related
Jan 10, 2011
Just upgraded from Etch and now I'm stuck at 640x480 resolution. Xorg.conf doesn't show any display modes, and xrandr gives the only resolution as 640x480. The laptop is a Toshiba Tecra 730XCDT. I know its a doorstop, but 800x600 worked fine under Etch. Anyone know how to to change it back? It's really hard to look at right now.
View 3 Replies
View Related
Apr 23, 2009
I've finally managed to get the nvidia driver on my Lenny box. However I've now found that I can't change resolution from 640x480, the nvidia panel shows this and 320x240 as the only resolution. The layout shows "hidden as under 600 pixels" If I go to gnome screen resolutions it only shows 640x480. If I plug a second monitor in it won't detect it.
I'm using NVIDIA-Linux-x86-180.51-pkg1.run, older versions appear not to work with Lenny crashing x on boot. How to change resolution on the nvidia in Lenny?
View 5 Replies
View Related
Jan 1, 2011
GNOME decided not to use the correct resolution ever. In Ubuntu, it got it automatically and that said it should be 1366x768, and when i run this:
Code:
xrandr -s 1366x768
I get
Code:
Size 1366x768 not found in available modes
So then I tried to run xrandr and find out what was available and I got:
Code:
$ xrandr
Screen 0: minimum 640 x 480, current 1024 x 768, maximum 1024 x 768
default connected
[code]....
So when I try to change it to 1024x768, I get the same "not found in available modes" message.
View 9 Replies
View Related
Feb 3, 2011
I've Live Lenny with xfce desktop.Howto create application launcher and change icon on xfce desktop?
View 3 Replies
View Related
Apr 16, 2010
I installed Debian Lenny on my old IBM thinkpad R40e but i can't change the brightness either with the Fn keys or with the brightness control debian has. i have searched around and it seems to be a problem with linux on IBM thinkpads but i don't know that much about this sort of thing so any help would be appreciated. if you need any more info then just ask.
View 9 Replies
View Related
Feb 1, 2011
How to change boot loader from Grub to syslinux on running Lenny without damage the system?
View 1 Replies
View Related
Apr 12, 2010
got an acer aspire one zg8 running debian in a vmware enviroment i only have 800x600 and cant change resolution do i need to install linux drivers for intel 945 express vga card? i googled for drivers for vga card but linux and there were linux drivers,but it said linux 4 trying to get into linux.
View 1 Replies
View Related
Jun 16, 2010
playing with debian I find that I have no answer when I try to resize my console if I wish to use it without a GUI. Are there something that could resize the screen ? In this moment it seems to be 640x480 and it could be better if the resolution could be 800x600. I have tryed to modified /etc/grub/00_header
if [ "x${GRUB_GFXMODE}" = "x" ] ; then GRUB_GFXMODE=800x600 ; fi
View 7 Replies
View Related
Aug 17, 2010
Ever since I installed Debian, my monitor keep saying: "Input Signal Out of Range Change Settings to 1600x900 - 60Hz". So I thought it a problem of the screen resolution, so I have been trying to edit my xorg.conf file, but it doesn't seem to work at all. And this is my settings.
Section "Monitor"
Identifier"Configured Monitor"
EndSection
Section "Screen"
Identifier"Default Screen"
Monitor"Configured Monitor"
Device"HP 2009m"
SubSection "Display"
Depth24
Virtual2048 2048
Modes"1600x900_60.00"
EndSubSection
EndSection
View 2 Replies
View Related
Apr 23, 2010
I just installed debian (lenny) on a new MSI 785GTM-E45 motherboard with a built in Radeon 4200. I have a MAG 22" LCD monitor that has a maximun resolution of 1680X1050.xrandr on my sytems reports the following: the maximum is incorrect
Screen 0: minimum 320 x 200, current 1920 x 1440, maximum 1920 x 1440
default connected
1920x1440 0.0
[code]....
View 1 Replies
View Related
May 6, 2011
The resolution is OK in grub menu but after something is setting to higher value. How can i set it back to 640x480?
View 1 Replies
View Related
Jan 27, 2015
I have a fresh installation of Debian 7.8 on my Dell Precision notebook. Somehow I failed to configure Xorg in a proper way. I do have X up and running, but I can not change my monitor resolution. Here is my graphics card.
Code: Select all$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06)
01:00.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Radeon HD 8800M Series
I tried to follow suggestions from Debian Wiki, somehow nothing really worked (https://wiki.debian.org/AtiHowTo)
Code: Select all# aticonfig
aticonfig: No supported adapters detected
Code: Select all# X -configure
Terminated with an error, below is the Xorg.0.log file
Code: Select all[ 227.953]
X.Org X Server 1.12.4
[code]....
View 2 Replies
View Related
Dec 30, 2010
I just bought a Logitech 570 trackball. I feel as though the resolution may be set a little low. How do I change mouse resolution under Linux? I do have lomoco btw, but when I use the command lomoco -8 it says the device does not support writing a new resolution to it. Basically wondering if theres a text file somewhere where I can just change the default mouse resolution.
View 1 Replies
View Related
Nov 18, 2015
Now that I'm more lucid I can adjust the format a bit. If I try opening the TTY the screen goes completely black after visualizing few artifact on the bottom of the screen.
Pressing Ctrl+Alt+F7 brings me back safely to the GUI
So far I tried to modify the /etc/defaults/grub file to uncomment the grub resolution and the grub_terminal to no avail. Now at least it seams to waste some less time to load the grub (it took something like 15 sec before) but it lost the previous green/torquoise background and now it's white char on black background.
On a side note pressing C on the grub to reach the grub console gave me some answer I don't know how to deal with... I was trying to use vbeinfo but it didn't found the command and so I tried the insmod:
Photo(large) of the complete grub console session wrote:grub>
grub> videoinfo
List of supported video modes:
Legend: mask/position=red/green/blue/reserved
grub> videotest
error: no suitable video mode found.
grub> insmod vbe
error: file `/boot/grub/x86_64-efi/vbe.mod' not found
View 3 Replies
View Related
Jul 4, 2014
I have wheezy installed on my laptop with XFCE 4.8 and kernel 3.14 from backports. The laptop uses Nivida-optimus:
Code: Select all00:02.0 VGA compatible controller: Intel Corporation Haswell Integrated Graphics Controller (rev 06)
01:00.0 3D controller: NVIDIA Corporation Device 1292 (rev a1)
I installed the proprietary bumblebee-nvidia (version 3.2.1) as per the instructions in URL...The problem is that when I connect a monitor to the laptop, the image is duplicated with only part of the screen showing on the second monitor. The monitor itself is not detected in the display settings or arandr / xrandr, so I can't change the resolution or set dual display, etc. Here is the output of xrandr:
Code: Select all$ xrandr
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 1920 x 1080, current 1920 x 1080, maximum 1920 x 1080
default connected 1920x1080+0+0 0mm x 0mm
1920x1080 0.0*
View 0 Replies
View Related
Jan 30, 2010
The login screen is always at maximum screen resolution, how can i change this?
View 2 Replies
View Related
Jul 13, 2015
I am wanting to try to change my normal user (bbq) to a different screen size within my secondary user (lfs). I was wondering how one would do that.
This happened when OpenClonk changed my screen resolution and when i changed it back my screen blacked out (and me being the idiot save it).
Debian 8 GNOME
Also (a bit unrelated) could a video card problem cause a user to log out? I have been having some severe problems with my monitor and I am thinking it is th video card. Sometimes when I am starting a program my monitor will lose connection to my computer (HDMI signal not found) and I will either have to wait a few seconds and it will turn on or it will just stay blacked out.
View 0 Replies
View Related
Oct 4, 2014
Currently my display is set to 1280x960 at 60Hz, but my monitor supports 1920x1080, which is what I would like to have. Preferences -> Monitor Settings (lxrandr) does not change anything & does not show my desired resolution either. I tried using the Nvidia propietary drivers but whenever I try to switch to them from xorg.conf the X display can't start. right now I am using the nouveau driver. I've seen some xrandr commands but so far haven't been able to figure out what I need to do.
I am on Debian 7.6.0 (Wheezy) amd64:
Code: Select all$ uname -rms
Linux 3.2.0-4-amd64 x86_64
I installed my system from the LXDE live media.
My graphics card is the NVIDIA GeForce4 MX 440 (NV18).
lspci output:
$ lspci | grep -i vga
01:00.0 VGA compatible controller: NVIDIA Corporation NV18 [GeForce4 MX 440 AGP 8x] (rev c1)
View 8 Replies
View Related
Jun 18, 2010
I installed debian 5 in a pc with a Intel 4 series VGA. The optimal resolution for the monitor is 1360x76, but the system does not allow that. I tried to change my xorg.conf, but got no success.In my xorg.conf I used this:
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
[code]....
View 9 Replies
View Related
Oct 14, 2010
When I boot my computer I get this message: Warning Pc video resolution is out of range Change setting to recommended resolution 1280x1024 @60mh So I hit ctrl alt f1 I typed in Sudo dpkg-reconfigure xserver-xorg Nothing happens. It's been very frustrating because with everything that I've looked up it says that it's suppose to guide me through something. I desperately need my computer for school.
View 8 Replies
View Related
Feb 9, 2010
I'd been trying to get into Linux before I bought it so I figured that I would try to get it onto my new Mac so that I could use it wherever I am. I decided to try Debian Lenny 5.0.3 a whirl after reading about all the different distros available. I've successfully installed it and I can get to it with rEFIt, and I have quite a few things working such as the video drivers and wifi. However, I've had trouble getting it to a level where it'd be usable away from home. Here are the main problems I'm worried about:
1) I installed pommed but I still can't use the brightness keys to change the screen brightness. I'm not sure if there's some other workaround for this?
2) I tried some recommended power management packages (gnome-power-manager) but it doesn't seem to be accessible or functional right now. I don't have any way to control it or get to it that is obvious to me. Is an icon or anything supposed to appear on the task bar when you install or what? Getting some sort of power management on here is important because it gets really lousy battery life otherwise.
3) Being a Macbook, there's no right-click button. Multitouch would be really nice (two-finger scrolling!) but I'd be OK with ANY way to right-click with the touchpad. I have a wireless USB keyboard/mouse combo that works at home at least . . . right out of the box too!
4) I've seen some packages called the Mactel PPA, but they are made for Ubuntu. Since Debian and Ubuntu are so similar, is there any way to make those work on Lenny? I think that if I got those to work, I could fix some of the problems above. Or do I have to install Ubuntu?
5) I just noticed that the sound doesn't seem to work yet either.
View 4 Replies
View Related
Apr 27, 2010
my error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
View 6 Replies
View Related
May 21, 2011
I need to change the screen resolution, but there is no xorg.conf file.. Under system/preferences/screen resolution there is only 800x600 and 640x480 to choose from. I want at least 1024x780.
View 2 Replies
View Related
