Debian :: Installer Doesn't See Broadcom NIC's / Do That?
Mar 22, 2011
I did a quick Google search and found a few old reports of bugs and miscellaneous postings but nothing hit specifically to my issue. My Dell PowerEdge 2950 server has Broadcom NIC's onboard and when I try to install a fresh ISO of Squeeze and then I tried even Wheezy and both came back and had issues recognizing my NIC's. They asked me to load additional firmware for drivers which I obviously don't have from Dell since they only support Windows O.S. Is there a method or some how I can successfully do a network install (netinst) on this hardware?
I downloaded this "debian-6.0.1a-amd64-netinst" iso image....But on the partitioning screen, after selecting the manual partitioning, it shows the whole hard disk without detecting the XP partitions.
I am trying to install Debian Lenny (64 bit) on my brand new Toshiba laptop (intel i3, 3 GB RAM) and for some reason the installer cannot detect the ethernet card. This is the error message I get:"No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list."And then there's a list which is quite long -- and I cannot replicate it here. But I want to know why the installer cannot find the ethernet card on its own or find the appropriate driver. In any case how can I fix this problem?
I'm very new to Debian (and Linux in general), and am currently taking a Linux course at college... I'm trying to get Debian running on my MacBook Pro (late 2009 model) and it's been complicated but I've got the operating system installed on it... I'm just having a few problems, the biggest right now of which is my wireless card, which doesn't work. So, I found instructions on the Debian Wiki for getting the driver for it, but it's not compiled already and I have little knowledge of manually installing stuff through Linux...
I'm working on Lucid, in HP Pavilion 9730us laptop.
My wireless broadcom card was working just fine until now as i installed it with the Hardware Devices manager, Today i put a new ALFA AWUS036H usb card to work with aircrack. both cards were working together for a while, but as i started playing around with aircrack the broadcom card of the HP has stopped working.
I made a mistake and followed the aircrack tutorial for R8187 / ieee80211 stacks driver, while i'm using RTL 8187 / mac80211 stack drivers, and blacklisted the RTL8187 , rebooted and then both card didn't work. I un-blacklisted it, and the ALFA is working but the broadcom not!
iwconfig shows me only one wireless card on wlan0 the blue light showing activity in the HP card doesn't go on.
Tried to uninstall and reinstall broadcom drivers, still no change.
I've searched the forums, internet, etc... and I can't seem to find anything on this. I installed Windows 7 using ~70% of my available hard drive space, the other 30% is unallocated. there are two partitions, the 100MB 'System' partition and the NTFS one with Windows 7.
On my first attempt to install Ubuntu: The partitions didn't look right. It detected two NTFS partitions, the first one of 100MB, and a second NTFS partition using ~30% of my hard drive, and 70% (presumably Windows) as unallocated. I decided to go ahead and try to install it over the 30% NTFS partition thinking that maybe the installer just didn't recognize the free space right or something, but after that happened, Nothing loaded and my Windows partition was trashed.
I wiped the drive, and reinstalled Windows again with the 70/30 split. On my second attempt to install Ubuntu: On step 4 of the installation process (partitions) it doesn't detect my Windows 7 installation at all. Instead, it says the disk is 100% unallocated.
Does anyone know why the Ubuntu Installer is not detecting my Windows partition correctly? If so, how can I go about getting Ubuntu to see it and install itself along side Windows?
I have trouble installing ubuntu on my desktop machine. I had Mint before, reinstalled Win7 and wanted to upgrade to newest release as I didn't use Linux for some time.
Basically fdisk can see the disk but installer don't
I'm trying to dual-boot install ubuntu but when i start up the installer it doesn't see my ntfs windows 7 partiton (64 bit if that matters) but i can mount it in nautilus?
Also, the same exact thing happens in Pclinuxos and Sabayon.
I'm using a Dell Vostro 1000, and i just installed lucid. However, whenever i try to install either the broadcom STA or B43 drivers, i get this message
SystemError: Failed to lock /var/cache/apt/archives/lock
I'm trying to setup a dual boot system with Windows Vista 64 (already installed) and Ubuntu 10.10. I added a new drive which is identical to the one Vista is installed on. When I boot into the LiveCD I can see and mount the second drive and edit it in Gparted. However, when I use the installer it will only bring up the drive that already has Vista installed.
I recently did a fresh install of Windows 7 on my laptop, then shrunk my partition and set aside some free space for Ubuntu. When I went to install Ubuntu, however, it told me that no operating systems had been detected on the system. I ignored this message and just installed Ubuntu on the free space, but when the installation was finished, GRUB failed to recognize Windows 7 as well and would only boot into Ubuntu.
After several attempts at getting GRUB to see W7, I eventually gave up and used my W7 CD to reinstall the Windows bootloader which, naturally, didn't detect Ubuntu and would only allow me to boot Windows.
I've tried messing around with my Windows partition a bit, but no matter what configuration I use, I can't seem to get the Karmic installer to see it. I've resorted to using WUBI for now, but I'd really like to have Ubuntu on its own partition in case something goes wrong with Windows; plus, I'd love to be able to use ext4 and GRUB. Anybody know how I can get around this issue?
I've used the same install CD on several other machines with Windows 7 and it recognized them just fine. It's only this one computer that's having the issue.
When trying to install Ubuntu 10.04 desktop from USB pendrive I can't see the sda partitions in the manual partition editor.I have a dual boot PC with Windows XP Pro and Ubuntu 8.10 running (see below for more details). Using the 10.04 Ubuntu desktop edition on a USB stick (pendrivelinux), I can boot without a problem and everything works fine: mount/unmount of all my drives, read data, etc. But I can't install the 10.04!When running the installer, at the point where the partition is selected, I choose "manual" as option. On the next screen I only see the drives/partitions starting from /dev/sdb1... to sde, but NOT /dev/sda. The "Add" button is greyed out, I can only edit the existing partitions. When I edit and press forward I get an error telling me that the SWAP partition is missing. I already HAVE a swap on sda.
I also tried booting Ubuntu 10.04 and then running the installer - no difference. I also remove the plug from one of the drives (sde) - still the installer doesn't show me sda.I would like to install 10.04 without messing up my Windows XP Pro and without messing up my /home partition or any other partitions that are non-Ubuntu stuff.In former years this used to be the easiest part, now it looks like a challenge. Any help is appreciated. System and background info:Hardware: Desktop PC with Intel Core 2, Nvidia graphics card, 5 SATA hard drives hooked to Gigabyte mother board, two network cards (only one in use)Current OSes: Windows XP Pro on sda1, Ubuntu 8.10 on sda and sdb
When I tried to install Ubuntu 9.10 or 10.04 (from CD or USB drive), and selected manual partitioning, the installer would not show all my drives.
However, when booting the life CD/USB, gparted or the Disk Utility did recognize all drives and partitions.
It turned out that one of my drives was marked as RAID partition, although I never used RAID!
Here the symptom:
When you run the installer and select "manual partitioning", the resulting list of drives and partitions is incomplete. In my example it was:
sda - sda1 sdc - sdc1
[Code]....
You may have multiple drives with the RAID metadata on it. In that case you need to repeat the above command for all those drives. Just make sure you don't wipe out your existing RAID, if you have one.
Reboot the system and see if it works.
P.S.: Also check your BIOS settings - do you have drives configured as RAID?
I'm trying to install ubuntu 10.04 on an old computer, but the installer doesn't have any listed partitions and I can't go any further. The hard drive I'm trying to install it to was just formated in Windows 7, it's a clean hard drive. Uh, how am I supposed to install it?
20GB Laptop HDD in external enclosure with USB interface. Formatted FAT32. Shows up in Windows as E:. The Universal USB Installer, however does not see the drive. Is that app only set to look for a true USB flash drive and I'm just doing it wrong?
Trying to install Ubuntu 10.10 on new Apple Macbook Air 3.2 with USB key. I'm able to partition and install REFIT fine, but when I tell REFIT to boot from the USB key, it goes to black and says "boot error".I then tried dd'ing the USB key partition to a local partition on the Macbook Air and booting that via a suggestion from another thread. It actually started loading the purple Ubuntu bootsplash-looking background then went straight to black even before the screen to select "try" or "install". Anyone know how to get the install USB to boot?
I've been trying to install Ubuntu 10.10 on my custom built AMD Athlon FX-53 system to use as a web server. I downloaded the AMD64 desktop version and whenever I boot to the CD it'll go through the loading screen, bring up the install background and then the mouse cursor will appear. After that the mouse cursor keeps switching between the loading one and the regular one and it never fully loads the installer.
The system specs are:
AMD Athlon FX-53 @ 2.4 GHz (Stock) 1 Gb OCZ PC-3200 ram (2x512) PNY Verto FX5200 Western Digital 40 Gb IDE hard drive based off an Asus SK8V motherboard (Skate 5 to me...)
I was able to install the 32-bit version and I've tried 2 burns, one on a CD-RW and one on a CD-R and the checksum is the correct one based on whats posted on the site.
I'm trying to install DropBox so that the 'DropBox' folder gets placed in /dev/sda4 which is a spare ext4 partition on my disk. Root is /dev/sda1, swap is /dev/sda2 and home is /dev/sda3.
The DropBox installer does not show /dev/sda4 as a location to install it to in the 'Location' drop-down selector.
In Dolphin, the /dev/sda4 partition appears as '19.7 Gib Hard Drive'.
Do I need to do something to make /dev/sda4 accessible to the DropBox installer?
I'm trying to set up a dual boot of Ubuntu & Windows XP.I have two hard disks installed - sda is 80GB and has an existing Windows setup on it, sdb is my 160GB data storage disk.When I have installed Ubuntu on other machines, it has detected any exisiting OS's and offered to install Ubuntu alongside them.
However, this time Windows doesn't seem to be detected - it says 'no other operating systems found' and wants to install to my second (i.e. sdb) disk. I was intending for Ubuntu & Windows to sit side-by-side on the first hard disk.Although I've installed Ubuntu before, I'm a bit of a novice and I'm not sure how to achieve this - where am I going wrong?
I am about to make a fresh install of ubuntu 9.10 on my 160gb hdd and keep my home directory. Here I also have Windows XP installed, the swap, home and root. All of these are done manually and given names such as 'sda1', 'sda5' ect.(I do see them in system monitor > file systems) The problem is that the installer doesn't seem to show me these tables. I only get a 160gb big chunk. GParted will not show it either (but as root is running from their I guess it cant?).
I downloaded wubi.exe from Opera 10.61. The file downloads ok, but then refuses to do anything when I click on the file.
I also switched to my IE version, and tried to run the file from there. Again, I get the hourglass symbol for a couple of seconds, then nothing.
I'm running Windows 98. I know, I should have a newer version, but finances can't manage that right now. In the meantime, is there a manual way to run the installer for wubi and get it to work?
I have an Asus P5K motherboard with an Intel Core 2 Duo 8400. It has 2 SATA hard disks, a 250 GB Seagate and a 500GB Hitachi.
I've been running Fedora 10 x86_64 for 6 months on this computer without problems.
I'm trying to do a new Fedora 11 install on this computer but the installer (Anaconda?) only detects the Hitachi disk.
I've tried to make a new Fedora 10 install to check if it was a media or disk problem and it detects the two hard disks.
I've tried to install it via a Live CD, and the installer only detects the Hitachi disk. The LiveCD detects the two hard disks, I can access it, partition, format, write, but the installer only detects the Hitachi.
I've tried to change from Enhanced SATA (AHCI) to Compatible in BIOS without success and I've changed SATA cables from one disk to the other, changed the disk order and nothing.
Must I enter some boot parameters for Fedora 11? Has the LiveCD installer some options?
I have been upgrading from 9.04 to 10.04. Now, I want to install 10.10 from the beginning without losing the data in my current partitions but when I run the Maverick installer it recognize my disk as a whole with no partitions. From another posts, I suspect that the problem is in the partition list because it seems to be a duplicate partition but don't know how to fix it. This is the fdisk output:
Code: jgarcia@jgarcia-laptop:~$ sudo fdisk -lu /dev/sda Disco /dev/sda: 250.1 GB, 250059350016 bytes 255 cabezas, 63 sectores/pista, 30401 cilindros, 488397168 sectores en total Unidades = sectores de 1 * 512 = 512 bytes
I have a Windows XP system, and wanted to install Ubuntu to a 100 GB XT3 partition on the same drive. I was told I could chainload Ubuntu from the NT Loader menu. I booted from a Ubuntu 10.04 CD and ran the installer. It didn't find any hard drives. On a hunch, I tried the 10.04 alternate installer CD. That DID find the hard drive and partitions. I had the installer make /dev/sda7 (the XT3 partition) the root. Installation proceeded smoothly, but then the installer told me it did not see any other OS's on my drive! Why? I directed the installer to place grub on /dev/sda7 instead of the MBR.
Per the instructions I was given, I used DD to copy the first 512 bytes of /dev/sda7 to the Windows primary partition (sda1) as bootloader.lnx. But the resulting file is empty, and it won't boot. I repeated the whole process - formatting, installing FOUR times, and same results. I have no idea where GRUB was installed. It is apparently not in the MBR, because I still have my normal Windows boot. I downloaded the 10.10 alternate installer and got the same exact results. Even switched from XT3 to XT4. After two weeks of this nonsense, I still have yet to see Linux boot.
I've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this: - is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or - did I do something wrong in the install process? or - is this some weird bug manifesting itself?
when I finally wanted to install Debian to my hardrive. Somehow, how to copy it to USB drive and make it boot-able. Installation process started without problems, but it failed on step called (something like) "Find files in CD-ROM" - what was expectable, since I used USB drive. So I wanted to unmount "/cdrom" and mount my USB drive there instead. I moved to another terminal, and searched for right device. "ls /dev" does not help, since I can't scroll to see other devices. Also kernel messages - can't scroll. Tried to change keyboard layout, still didn't work. I also can't use less, because there is no apt-get installed. Another problem is, that after trying to mount only viewable device (/dev/sda1), mount failed bacause I gave there invalid argument, or directory didn't exist. (Note that I created directory in /mnt/... or /media/... first). So I am asking - how can I remap keyboard to use those page up/down keys?
when it comes to openSUSE but I am earnestly trying. I installed the openSUSE OS on my HP dv6000 laptop, but it does not seem to recognize my wireless card (which is a Broadcom 4311).
Now that Etch is on archive.debian.org - how do I get the Debian installer to install it (via. net)?Before everyone shouts "upgrade to Lenny" - I need Etch for a reason.Simply putting archive.debian.org as the install mirror doesn't work either.
