We received some client data on an external USB drive. We plugged it into our CentOS 5.5 machine and I ran an fdisk -l which gave me this new info: Quote: Disk /dev/sdf: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
[Code]....
When I try to boot to OpenSUSE I get the following error during boot-up: unknown filesystem type 'reiserfs' could not mount root filesystem - exiting to /bin/sh$
This only started happening quite recently - before this I could boot to Linux quite happily.
I am trying to mount a file image, like this
mount -o loop /tmp/apps.img /media/apps
But I get the following:
mount: you must specify the filesystem type
I try ext3:
mount -o loop /tmp/apps.img /media/apps -t ext3
dmesg says:
error: can't find ext3 filesystem on dev loop6.
I've also tried ext2, vfat etc. How can I detect the filesystem type of apps.img?
I installed Ubuntu Server 9.10 in a virtual machine, and I'm trying to install the VMware Tools but I can't mount the installer CD: $ sudo mount /dev/scd0 /media/cdrom mount: unknown filesystem type 'iso9660'
View 1 Replies View RelatedI recently upgrade my armel NAS from etch to squeeze. During the partitioning step of the installation I intentionally left unmounted the data partition (900GB formatted XFS) but after the installation I'm not able to mount it.
I edited the fstab file adding the last line
And tried a mount but I get the message
So i noticed throught lsmod that I don't have the module for xfs
Tried installing xfsprogs but it didn't helped. So I searched for xfs-modules but seems it doesn't exists for armel architecture. Am I right? What does it means? That XFS is not supported in armel Squeeze? Assumed I can't transfer/backup 900GB of partition, is there a way to convert it on-the-fly to a supported filesystem format?
I dont know anything about linux and just been assigned to amount a drive to it. here's what i did so far: Version of Linux using Red Hat Enterprise Linux Server release 5.3 (Tikanga) [root]# mount -t auto /dev/sdb1 /tmp/archive mount: unknown filesystem type 'ntfs'
when checking the /proc/filesystems, i noticed that 'ntfs' is not listed there, several forum suggested i try running 'modprobe ntfs'. If that is not found, you'll need a kernel with ntfs support. i'm so lost, where to i get the modprobe ntfs
I'm trying to mount an external DVD +RW Drive so I can burn a directory from my Linux Server to disk. I think I've figured out how to mount the drive, but it only works when there's a disk with data in the drive. When I enter mount /dev/scd1 /mnt I'm able to read from the drive, no problem. When I try to do the same thing, however, with a blank disk I get the following message: "mount: you must specify a filesystem type" So I'm assuming I need to prepare the disk somehow. I've verified that the dvd+rw-tools package is installed on the RH server but I'm not sure what the next step is.
View 4 Replies View RelatedI had windows with ntfs I installed ubuntu. All ok. Gurb with 2 os, can ran windows and ubuntu and can mount ntfs partition in ubuntu I installed debian with lvm over ubuntu partition. I can't mount ntfs partition now, and windows doesn't appears in gurb
# mount /dev/sda1 /mnt/windows/
mount: unknown filesystem type 'LVM2_member'
# pvs --all
PV VG Fmt Attr PSize PFree
/dev/dm-1 -- 0 0
/dev/dm-2 -- 0 0
/dev/root -- 0 0
[Code]....
I can't active vg because haven't name, but is not lvm, is only ntfs partition Maybe ubuntu puts in lvm and grub? Any idea? If I change with fdisk to ntfs i lose all the information in the partition?
[Code]...
I just got an Acer netbook Aspire One. I put the Ubuntu remix on it successfully, and was using it for several days without problems. Now all of a sudden when I turn on my computer I get a grub error message with a command prompt. I've tried following the direction to restore grub but I'm getting stuck right away on the command to mount my ubuntu partition. After I type "sudo mount /dev/sda4 /mnt", I keep getting the error message "mount: you must specify the filesystem type."
View 3 Replies View Relatedi am trying to compile kernel 2.6.23 on Fedora 12 After fixing a few bugs (getline error, %dil ,etc) i was able to compile the kernel made initramfs img using dracut updated grub and then booted up the new kernel 2.6.23 but it fails to boot with following error mount: unknown filesystem type 'ext4'
View 8 Replies View RelatedI just updated Fedora 14 with the updates it downloaded and I am now stuck with the error.
View 10 Replies View RelatedFormated new drive with ext3 on external drive on Suse 11.1 When upgraded to 11.2, drive was not connected... Could not get mounted after that... Set up another boot drive, could not get to mount. Found post with following:
>cryptsetup luksOpen /dev/sde1 restore
>mkdir /restore
>mount /dev/sde1 /restore
Error as follows: mount: unknown filesystem type 'crypto_LUKS' Have also got to another point where superblock was incorrect. I can use terminal, but am not a linux guru... Have looked at other posts under luks, but can not find a solution.
The problem of such standing Fedora 12-i686, with all the latest updates, the next time (do not remember what he's updated), restarted the computer ... after as soon as he began to load line (Grub boot norms) wrote many times that the Mount: You Must specify the filesystem type from the LiveCD tried all said that there was no public Linux systems, tried a single mode w that crusty file system ... tell me how best to restore the data from the HDD ...
View 13 Replies View RelatedIn my system around 73gb(pc-desktop) i have,1 primary partition(windows)-25gb, 1-extended partition(remaining gb) 3 logical partitions were there in (under) extended partition in one of the logical partition is d:drive. in my hard disk d: drive is -/dev/sda5
previosly i was fat -file system , (d:drive-/dev/sda5), i remember i changed the d: drive(d:drive-/dev/sda5) file system to ext4file system ,with following command using terminal
After doing(changing the file system)this one ,i couldnt see the d:drive data
By doing that
1q) Did i reformatted the partition? i think the new filesystem(ext4) has no knowledge of the data that was on it when it had a FAT filesystem.
2q) How to do undo operation,i tried to change the filesystem type to fat/ntfs in terminal using command --sudo mkfs -t FAT /dev/sda5.
Result:its showing text message-'mkfs.FAT: No such file or directory'(not in single quote)
I had very imp data in d:drive
I have a following problem: Recently my drive with Ubuntu 9.4 has mysteriously stopped working, i.e. when I switch the computer on it informs me that GRUB didn't find the filesystem. Well, I suppose it happens.
First, I though it was due to the drive dying, but I popped it in an external enclosure and HDTune told me the drive was fine. Wanting to recover the files on the drive before reinstalling I first tried to mount it in said external enclosure under Windows (I have Win Ext2 driver installed which used to work just fine). This time, however, drive gets assigned a letter but upon opening it Windows popped up an error saying that the drive was not formatted and whether I would like to format it then.
Unfazed by this streak of failures I tried to mount it under Linux but, alas, to no avail. I might have tried every single -t operator under mount command but it still won't budge and let me mount.
When I want to mount an iso file with "-o loop" I get an error that need the filesystem type. How can I fix that?
Code:
mahmood@pc:disk$ sudo mount -o loop ubuntu10.10_64.iso /mnt
mount: you must specify the filesystem type
I have been using truecrypt to mount a partition on my computer for a few months now. Yesterday I tried to access it and it failed, with the following error:" mount: you must specify the filesystem type "
When creating the partition, the filesystem type was set to ext2. Apart from yesterday, I have not accessed this partition for a number of days now, and have done nothing to the operating in system in the ways of changing settings and such for a good week.
how can i install debian on NTFS or FAT32?
View 3 Replies View RelatedCode:
fsck from util-linux-ng 2.17.2
e2fsck 1.41.11 (14-Mar-2010)
/dev/sda1 is mounted.
WARNING!!! The filesystem is mounted. If you continue you ***WILL***
cause ***SEVERE*** filesystem damage.
Do you really want to continue (y/n)?
I don't want to cause damage, but I'd rather not go into BIOS.
As per these instructions, I got up to the end of the "Acquiring an Ubuntu filesystem" step (where it asks you to mount the newly created Ubuntu partition) and ran into a problem: The partition won't mount, as the file system type cannot be determined because I cannot remember the file system used during installation. Is there any command that prints the file system type of GPT partitions?
View 5 Replies View RelatedUsing tar is it possible to backup different types of file system e.g.ext3, ufs, or any other file system. I know using dump it is not possible because it is reading through raw device. Then what about tar? Where I get more info about this? Means suppose I want to backup files from different file systems using tar then is it possible?
View 1 Replies View RelatedI've scoured the list of options for FS type in cfdisk for ext3 or ext4 to no avail. How then do I set the filesystem type for my partition to ext3?
View 3 Replies View RelatedI changed the first line of /etc/fstab in an attempt to get rid of an annoying message "mount: unknown filesystem type 'static'". All I did was put a "#" on the first line .... changing the original from:
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
to:
#
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
I have tried desperately to get to the file system so that I can edit that first line in fstab out but nothing works and the file system comes up as read only ...
I had installed ubuntu 11.04 on my system along with windows vista. After a few days, i decided to remove ubuntu so i just logged into windows and formatted the ubuntu partition using the windows partitioner, then extended my main c: drive to span the whole disk so that i was left with a single partition with only windows vista on it.Later when trying to restart my system couldn't log back into windows.I kept getting a prompt sayinggrub rescue>After googling around a bit i shrinked and created another partition the disk again and installed ubuntu on it again.still. =/GRUB doesn't show any windows entry.I noticed something strange though that when i tried viewing my partitions using parted i didnt see any filesystem type listed besides my windows partition (/dev/sda3). I doubt that is why GRUB does not show any windows entry.Also i manually tried to boot into windows from the grub prompt using commands...root(hd0,3)chainloader +1bootbut it says 'invalid signature'Did i somehow corrupted my windows partition during resizing and installing/un-installing? Plus i also booted with the windows installation dvd and when i typed bootmgr /fixbootit said something like no valid filesystem found.
View 5 Replies View RelatedWhat is the primary filesystem type used by Fedora 12 Linux?
View 7 Replies View Relatedhow to change the file type of /opt to vfat from ext 4. during installing fedora 15 (64 bit) on dell inspiron 1545, i choose file type of /opt as ext4 but now i have realised that it should be vfat. ans second problem during the installation the option of repository appeared and i choose "customize later ", and now i have to add some lib in "software tab", how can i achieve that?
View 3 Replies View RelatedI installed a month or so ago a Samba File Server along with Active Directory integration in my company. I choose to install on my newly created raid array, all in ext3 filesystem. The purpose of this fileserver is to have lots of files from the different departments on the company (all windows workstations except mine). Everyone has a private folder and a department folder, along with the common folder for all employees.did I made a mistake formating all to ext3? would I get a significant increase in performance if I resize the current ubuntu partiton and created a new NTFS new one and move the files to it?
View 2 Replies View RelatedI have a spare harddrive that I want to store my videos on. They are in mp4 format. I'm using cfdisk to create a new clean partition on the drive. What filesystem type should i make it (linux,HPFS/NTFS,FAT16...)
View 2 Replies View RelatedI've just made the switch from Ubuntu to Debian Squeeze and am having trouble connecting external media (be it a USB stick or an ext HD). The error I am getting when I connect anything via usb is the following:
Error mounting: mount exited with exit code 1: helper failed with: mount: wrong fs type, bad option, bad superblock on /dev/sdc1, missing codepage or helper program, or other error.
When i type the df command i see that /dev/hda1 as a filesytem that is mounted at '/'(root). Is /dev/hda1 a filesystem. I thought that it is a partition on my hard disk that contains the root file system.
View 6 Replies View Related