Debian Installation :: Communicate With Hosts On Internet?
Aug 17, 2010
Trying to install Debian 5050i-386 ISO Image. Part way through I get the following error message: The network autoconfiguration was successful. However, no default route was set: the system does not know how to communicate with hosts on the Internet. This will make it impossible to continue with the installation unless you have the first official Debian CD-ROM, a 'Netinst' CD-ROM, or packages available on the local network. Of course I discontinued the install. How does one set a default rout?
View 8 Replies
ADVERTISEMENT
Jan 26, 2009
After updates and restart of debian server, my NIS is not functioning. No yptools are working, it cannot find the server. All my commands I issue on the NIS server. When I issue the command yptest, I get:
>>
century4:~# yptest
Test 1: domainname
Configured domainname is "cga.lan"
Test 2: ypbind
Can't communicate with ypbind
century4:~#
<<
rpcinfo gives:
>>
century4:~# rpcinfo -p
program vers proto port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100004 2 udp 899 ypserv
100004 1 udp 899 ypserv
100004 2 tcp 902 ypserv
100004 1 tcp 902 ypserv
100009 1 udp 901 yppasswdd
600100069 1 udp 904 fypxfrd
600100069 1 tcp 906 fypxfrd
100007 2 udp 913 ypbind
100007 1 udp 913 ypbind
100007 2 tcp 916 ypbind
100007 1 tcp 916 ypbind
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100021 1 udp 32795 nlockmgr
100021 3 udp 32795 nlockmgr
100021 4 udp 32795 nlockmgr
100021 1 tcp 59990 nlockmgr
100021 3 tcp 59990 nlockmgr
100021 4 tcp 59990 nlockmgr
100005 1 udp 894 mountd
100005 1 tcp 897 mountd
100005 2 udp 894 mountd
100005 2 tcp 897 mountd
100005 3 udp 894 mountd
100005 3 tcp 897 mountd
100024 1 udp 32797 status
100024 1 tcp 59863 status
century4:~#
View 3 Replies
View Related
Apr 19, 2011
I am trying to get Skype working, the only problem is the webcam, in the test video all I get is a black screen.
After some research I found this command to get Skype to work with my webcam, as you can see there are a few errors.
Below is a listing of of /usr/lib/libv4l/ directory
Other than the video, eveything seems to be working.
This is on Skype 2.2, Skype 2.1 was the same. webcam works fine.
View 2 Replies
View Related
Jul 27, 2014
I have a problem with my WiFi HP LaserJet P1102w printer. I can add the printer, but whenever I try to print anything, say, HP testpage, I get the following errors:
Code: Select allerror: Unable to communicate with device (code=12): hp:/net/HP_LaserJet_Professional_P_1102w?ip=192.168.1.6
error: Unable to print to printer. Please check device and try again.
error: Unable to communicate with printer HP_LaserJet_Professional_P_1102w. Please check the printer and try again.
I'm using current testing repos and the system is updated.
The printer is detected and installed via hp-setup, it just doesn't print.
This setup used to work, but I haven't printed anything in a while so can't be sure what caused it to stop working: updates, recent power outage or something else.
Printer is using a static IP address.
What works:
Printing over USB works.
Printing over WiFi from a different, Windows, PC works.
Pinging the printer (connected over a WiFi router) works. Also, opening the printer admin page works.
What I've tried:
Restarting everything.
Purging all hplip packages and reinstalling.
Installation log: [URL] ....
hp-check: [URL] .....
I'm stuck.
View 2 Replies
View Related
Apr 23, 2010
The computer connects wirelessly to a router. The router is connected to the internet and that is working well. (If i use a cable connection to the router, I can reach the internet).
Why wont the wireless connection reach the Internet? It is a strong connection. It worked before wirelessly. I am on 10.04 beta, with the recent updates installed.
View 1 Replies
View Related
Jan 28, 2010
I have annoying problem. My setup is the following: debian Linux, 64 bits, VMWare workstation 7 host, with Windows XP running as guest. From Firefox, or Internet Explorer, I am unable to access few sites, for example nvidia.com, osdir. Basically get connection timed out, on the other hand ping works to those sites. Moreover, Slashdot loads very very slow and sometimes gets horrible text-only version.
everything works fine on Linux host
I suspect it has something to do with routing on Linux, I recall having similar problem long time ago, which was fixed by setting something in /proc.
I tried setting MTU and TCP window size on Windows lower, but did not help
View 2 Replies
View Related
May 2, 2011
I'm trying to use ssh-keyscan to get some known_host file population going on, but I have a ton of hosts I want to scan, all with multiple aliases in /etc/hosts. Is there a way to use my current /etc/hosts file to do an ssh-keyscan instead of making a special list of hosts that (from what I've read) ssh-keyscan needs?
View 2 Replies
View Related
Aug 17, 2011
Well, as many proxy applications, GNOME Network Proxy Preferences only allow to ignore hosts. What I want to do is exactly the opposite. I only want to use the proxy for few sites. Is it possible to define only the allowed hosts in any way?
PS: I know FoxyProxy add-on for Firefox does this, but 1)I don't use Firefox and 2)I want the proxy settings system wide not only for browser.
View 9 Replies
View Related
Jan 26, 2011
Probably an easy (which means stoopid) question...I am trying to reroute a website using my hosts file so that it matches my servers certificate file for testing without effect dns and the live site.When I went to edit my /etc/hosts file it is non-existent. I have, I am assuming in it's place, hosts.allow and hosts.deny. Can anyone explain why I do not have a hosts file?
View 1 Replies
View Related
Sep 3, 2011
How would one block an IP range access to a Debian-based Linux system for say 47.1.1.1. - 48.255.255.255? Would it be with the hosts.deny file? If so, how would it be written in the file? Also, would the system require being restarted for the changes to take effect, after writing to the file?
View 14 Replies
View Related
Dec 27, 2010
I am trying to setup a basic file server, but seem to be stuck with the editing of the allow.hosts file. I installed the latest Debian, and when I try to edit it, and then save, it says I dont have permissions.
As a sidenote, I dont mean to belittle linux or start a debate, I am behind the whole open source/free software thing, but every time I say to myself, "okay, time to give Linux another chance", I cant believe how difficult it is to do even the most simplist of tasks. No wonder MS is still on top. If only one could do it ALL from a GUI.
View 5 Replies
View Related
Jan 17, 2011
[Code]....
What I want: multiple virtual hosts with ssl and only 1 ip address: In my example: server = 192.168.227.129
[Code]....
View 9 Replies
View Related
Mar 4, 2010
I'm having trouble implementing SSL on a AvantFax login screen. I've created the the certificates and keys and have them stored in /etc/apache2/ssl and I'm sort of stuck now. I've been following a guide but any changes to the conf files leads to errors. The system I'm using is Debian 5.0
[Code]...
View 2 Replies
View Related
Apr 1, 2011
I have a debian squeeze box with dual NICs that I'm trying to configure with two virtual hosts. I'd like to have one of these machines act as a router for the 2nd NIC so I can plug in a switch and have a separate subnet.
Something like:
- Openwrt router 192.168.1.1 (firewall/vpn/stats for 192.168.1.0/24 domain)
- KVM machine with 2 NICs (192.168.1.2)
- Virtual machine #1 has a fixed IP of 192.168.1.3 (virtual nic)
- Virtual machine #2 has a fixed IP of 192.168.1.4 (virtual nic) but also controls the 2nd nic and routes 192.168.80.0/24
I'd like to use the 192.168.80.0/24 network for testing equipment without poisoning my existing network.
View 2 Replies
View Related
Jun 11, 2011
Installed the latest stable of version of debian off of the website (amd64) (DVD version)
When I installed no network card was detected so I just proceeded to install without the internet access.When it booted up I didn't have sound either.So... is there any way to get my internet and sound to work?I have an ASUS P5G41T Motherboard with Atheros Eithernet and Realtek HD sound.
View 2 Replies
View Related
Sep 14, 2015
I don't know if this should be a followup to my prior topic [URL] ....
Each of the pieces I've installed all have an "Alias" directive in the conf file to link the directory where they live to be present on my server. For instance, DotClear lives in /usr/share/dotclear/web/ and there is a directive
Code: Select allAlias /dotclear /usr/share/dotclear/web
that directs http://myserver/dotclear to that site.
Now, I've set up VirtualHost entries for my DotClear and Owncloud with their own hostnames.
Code: Select all<VirtualHost *:443>
ServerName myowndotclear.com
ServerAlias www.myowndotclear.com
DocumentRoot /usr/share/dotclear/web
[Code] ....
Something similar for Owncloud.
The problem is when I go to [URL] ...., I get to my mythweb site.
This is not so good. So, for the sites that have their own hostnames, I removed the "Alias ..." directive. Of course, now I can't get to the hosts by going to the primary site which is probably fine, but I also still get my mythweb since that doesn't have it's own virtualhost entry.
This doesn't seem like correct behavior. Is there a better place to put the "Alias ..." directive so that it only works from one site and not all of them?
I am also thinking I should just link the directories into /var/www/html, but I'm not sure that's a better solution.
View 2 Replies
View Related
Oct 30, 2015
How to best manage both http and https pages on the same apache-server without conflicts. For example, if i have both 000-default.conf and 000-default-ssl.conf pointing to mydomain.com, and don't want users who visit mydomain.com without specifically type the https-prefix to be redirected to the https-page - how to handle users using browserplugins such as https-everywhere etc?
Another option would be to create a subdomain ssl.mudomain.com and have users who want to reach the ssl site to have to type ssl. I have tested several things with https everywhere enabled in my own browser, and it seems really hard to make this working the way i want, in one way or another i always end up getting redirected to the ssl-site automatically.
The reason i need this to work is because i run one site that i don't care much about SSL, that is the "official" part of that site, and i also host some things for friends and family on the SSL-part. This would not have been a problem if it wasn't that i use self-signed certificates for my ssl-site and the major user become afraid when a certificate-warning pops up in their browser and therefor leave the site.
View 2 Replies
View Related
Sep 6, 2010
I am trying something a bit tricky.Suppose there is a website URL...Now suppose when i open a file /var/www/ test.php which connects to the above website to gather some info and then allow me to further in the process, i want it to instead direct to a file say /var/www/test_done.php.How do i edit my hosts file for such a scenario? Is there any other better option than using a hosts file ?
View 1 Replies
View Related
Nov 1, 2015
I recently installed Debian using the net install file through USB on my Lenovo z510 laptop. It did not recognize my internet so I continued my installation without it and ended up with a bare bones command prompt version of Debian. So to uninstall it I just deleted the partition and took up the space with Windows 10. So now when I boot into the boot list(uefi) I still see Debian listed, and when I boot into it I see grub-rescue command prompt. Now I downloaded the live Debian ISO and used pendrivelinux to put it on. When I look in my boot list the USB does not appear and USB booting is on + Secure boot is off. What should I do to fix this mess? In the end I want Debian dual-booted with windows 10 with Debian being with the GNOME 3.x desktop environment.
View 2 Replies
View Related
May 20, 2011
New installation of Squeeze. No Internet. I have googled and browsed but all the responses seem highly complex, involving editing files. But elsewhere it says "In effect, the goal of NetworkManager is to make networking Just Work."
What should I do next?
I don't really understand these commands, but they always seem to be asked for code...
View 14 Replies
View Related
Oct 29, 2014
freshly installed Debian-netinst, configured internet connection. Pinged Google - all transmitted packets were received, 0% loss.
Yet I am not sure if I have internet connection for what ever package I am trying to install using apt-get install package_name, I receive
E: Unable to locate package package_name
How can I check internet connection from CLI?
View 3 Replies
View Related
Jan 22, 2011
I'm able to use apt-get and do updates.I cannot go to any webpages except debian.org.The same thing happened when I first installed linux mint debian 2010 on this same machine.Ethernet controller: VIA Technologies, Inc. VT6105/VT6106S [Rhine-III]Lenny was installed on this machine and I was able to go to any website.Do you think this will be fixed when Squeeze is officially released?
View 14 Replies
View Related
Dec 18, 2010
I have internet connection - you need to open a browser & in the login screen enter your user name & password to get connected. The connection is via a ethernet cable. I have the netinstall cd for debian testing. How to connect to internet & get debian testing installed.
View 6 Replies
View Related
Aug 8, 2011
I am trying to upgrade my system from 7.04 to a current version. I now face the known problem that my machine tries to download everything from archives.ubuntu.com although it has all been moved to old-releases."If you have this problem, you could change your /etc/host file to point archive.ubuntu.com to old-releases. Do this by running host old-releases.
ubuntu.com | grep address | awk '{print $NF" archive.ubuntu.com"}' | sudo tee -a /etc/hosts."
I have tried typing that information into the command line, with no success. I opened the /etc/hosts file in emacs (using sudo) but did not see an obvious place to impliment the fix.
View 1 Replies
View Related
Jul 30, 2014
Fresh install without a desktop environment, I only selected "standard software utilities" from the software selection step of the installation process, nothing else is installed thereafter.
I cannot follow these instructions [URL] .... because "auto" and "iface" commands not found.
iptables isn't installed, but I want to install nftables since it's what iproute2 is to net-tools.
And it doesn't even have NetworkManager either and so far I found out ifconfig (net-tools) has been dropped in favor of iproute2, although that is just what Wikipedia says.
[URL] ....
"apt-cache search iproute2" revealed there is only iproute.
I just checked, net-tools is also installed, but ifconfig command not found?
View 4 Replies
View Related
Jan 1, 2016
During the installation of Debian ( debian-8.2.0-amd64-CD-1.iso ) I couldn't connect to any mirror probably because the internet wasn't configured.
Thus, after the basic installation I wasn't able to install any packages ( trying to install sudo as root prompted me to insert the media disc - the USB drive I used wasn't detected going in an infinite loop ). Judging by the fact that I don't have a window manager installed.
View 14 Replies
View Related
Jun 3, 2011
I have installed ubuntu on Vmware.I work in Lan environment and I have 2 local linux servers in my office.I have installed nagios on ubuntu.but nagios doesnt show other hosts in office.How to do I add other hosts in the office in nagios so that I can monitor network properly?
View 1 Replies
View Related
Oct 22, 2014
I manage to install debian on my flex 10 (lenovo), but now internet is not working, i can see the network, but even being able to connect to them i can't access the net...
View 14 Replies
View Related
Dec 13, 2010
I've been looking through the Debian wiki, searching past topics in the forum, and generally googling, but all to no avail. I'm unable to connect to the internet through any wireless connections, nor through an ethernet cable. I installed the latest weekly image of Debian squeeze. After installation, I found myself on the command line. I installed gnome with
apt-get install gnome-desktop-environment I also tried installing gnome-applets, gnome-netstatus-applet, and gnome-nettool, but I guess they were already installed. When I open System > Administration > Network in Gnome, there's no connections tab in the Network Settings application.
Here's what I think is the relevant portion of lspci -v
07:00.0 Ethernet Controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01)
Subsystem: Hewlett-Packard Company Device 137a
Flags: bus master, fast devsel, latency 0, IRQ23
Memory at c2000000 (64-bit, non-prefetchable) [size=64K]
Capabilities: [40] Power Management version 2
[Code]...
I'm one of those people migrating from Ubuntu and in Ubuntu I had to add a 'rfkill -unblock all' command to my rc.local file for this laptop. Not sure if that's relevant, but thought more info couldn't hurt.
View 13 Replies
View Related
May 17, 2011
I just installed debian, durning the installation i opted not to connect to the internet since the large network cable was in the closet and i did not feel like standing up. Now i have finished installing and plugged the network cable in, expecting it to "just work", this is not the case. What needs to happen before the wired network connection starts working? also, the lspci output, appearantly it won't find any network adapter. I suspect this is the fault of my lazyness.
[code]...
View 2 Replies
View Related
