Debian Installation :: Can Avoid A Long Installation
Sep 9, 2011
I'm just wondering to know if I can download an image to install debian, that let me perform a full installation without wait so long to retrieve packages from internet while installing.I used before a CD image for debian 648 MB, and I can see available DVD images 4 GB too (not clear if this is due to DVD format or content) but I'm not sure if this actually means that the DVD one has a version included with the latest packages of the OS itself.
View 2 Replies
ADVERTISEMENT
May 10, 2011
For a number of openSUSE releases now, on a periodic basis (monthly, it seems?) both my laptop and my desktop take forever to start. During this time, the hard disk activity is going berserk. When inspecting this with "iotop", a process called "preload" or "start_preload" is hammering the disk, sometimes up to 10 minutes.
The irony is when you research "preload", you find mostly articles like "drastically speed up your Linux system with preload"- I sometimes think it has to do with running VMs on these machines and maybe it's trying to cache those large disk images? Pure speculation, but I can't seem to find any documentation on this.
Anyway, I did finally find a way to turn this thing off. WARNING: since I do not know exactly what preload does and whether your machine becomes unusable if you turn it off, please only follow these instructions at your own risk. Since preload seems to be a very low-level system/service, I did not want to risk uninstalling it. What I did instead was:
Yast2 - System Services (RunLevel)
Click the Expert Mode radio button
Scroll down to the boot.startpreload entry
[code].....
Since I applied these steps, no long boot times with insane hard disk activity has occurred and I also have not noticed anything else complaining or not working with this service off.
View 9 Replies
View Related
Jul 15, 2010
while installation of debian 5 from small cd ... does configuring apt take a lot of time!!! installing debian for the first time.
View 1 Replies
View Related
Dec 3, 2010
As this was my first Debian installation with a 500gig drive, I chose to use the defaults. Debian announced that it was going to format the drive as EXT3, and commenced,I waited 3-4 minutes and only saw a very steady on disk active light. I presumed that the format should have ended sooner, and therefore, believing that the installer was in a loop, I rebooted and retried the installation again.
This time I let it run for the full duration, about 6-7 minutes (I also have a terabyte drive), for Debian, and after the longest time, the installer proceeded to the next step. The drive format was not in a loop.With todays large disks costing under $75.00 per terabyte, it makes sense to put a propellor or other indication on the text or graphic screen to show that the installer is really working at formatting. My screen showed an unchanging bargraph pegged at 31%.
View 7 Replies
View Related
Jan 2, 2011
Here are 2 questions
1.In the last line of the debian kernel handbook 4.2.2 Applying patches
It is possible to apply extra patches to the source before starting the build. First, you should apply the existing patches by running:
You will then find the patched source in the subdirectories debian/build/source_arch_none (default) and debian/build/source_arch_featureset (featuresets added).
You should apply the extra patches in the appropriate subdirectory. where can I find the "extra patchies" and how to do?
2.Even though More than 8 hours have passed, 4.2.3 Building many packages
To build all possible packages for this architecture, run:
To build all architecture-dependent packages, run:
To build all architecture-independent packages, run:
The 1st command still working. what is the all possible packages? and what I am doing?
I am just trying to rebuild debian linux kernel 2.6.26-2, Did I misunderstand?
View 3 Replies
View Related
Jan 18, 2011
I have downloaded Ubuntu 10.10 iso and created a bootable USB from it. After satisfactory live session i am trying to install it using "Install Ubuntu 10.10" option shown on desktop. The installation started properly detected that :1. atleast 2.6GB drive space is available2. is plugged to a power source 3. is connected to internet.Since last two days it is running and downloading content from internet. verified using network monitor tool. In two days it has downloaded 527 MB.My questions are:1. what is size of download which is required for successful download ?
2. I got pretty descent broadband connection (indian standard ). can download 700 MB movie in 3 hours), but why it is not using full bandwidth and downloading content at average speed of 5KBPS. However if i download some content from browser directly than speed is normal aroun 60 KBPS.So how long I need to wait to complete the installation ? Should I suspend this installation and install from CD
View 2 Replies
View Related
Jan 16, 2010
Why does Windows (7) [over-]write the MBR [pseudo-randomly]? And what settings can I change to prevent that?
Background : I used to dual-boot Ubuntu and Windows-7 on my gaming-laptop, but periodically I run into GRUB-got-messed-up-please-fix-me-again welcome screens. how-to guides on restoring GRUB, but no obvious ones on how to avoid messing up GRUB in the first place. Whats interesting to note; I have another work-laptop that dual-boots Windows XP and Ubuntu just fine (for the past year) and have never run into any GRUB-got-messed-up-please-fix-me-again situations.
My Hypothesis : I have a hunch that Windows 7 writes to the MBR for enabling Restore-Points.
View 6 Replies
View Related
Jan 27, 2010
What pitfalls are there to avoid when dual booting? What can go wrong?
View 4 Replies
View Related
Jan 29, 2010
This is the related question in Launchpad:and it may affect to debian-installer configuration (?)How can I do to avoid that in the alternate installation partitioner doesn't appear "ext4" filesystem as the default selection in any step?This could make able to install to an encrypted independent volume, for example, without crashing partman-ext3:
View 2 Replies
View Related
Jun 9, 2010
After a disastrous attempt to upgrade Ubuntu 8.04 to 8.10 (system would not boot), I partitioned the disk in two and installed 9.10 on the new partition.
The old data was still available so I copied my old home directory on top of my new one thus:
I have managed to re-install all my software, but a few problems remain.
Here is one of them:
In spite on marking (with Palimpsest Disk Utility) the old partition (with 8.04/8.10 on it) as not bootable, at boot time I get offered three versions of Ubuntu 8.10 as well as 9.10 and the corresponding recovery mode boots etc. Any idea how to get rid of these options without formatting the partition?
View 9 Replies
View Related
Nov 14, 2010
I have three Ubuntu desktops that I would like to upgrade from 9.10 to 10.04. Is there a way to avoid having each PC download the same packages? Is there some magic I can do with two of the PCs to maybe point the software source list at the third 'master' PC that does all the downloading?
View 2 Replies
View Related
Nov 12, 2010
I booted fedora from an live cd not i have a problem when i want to install fedora formatting is taking vey long its already busy for 1 hour and this is te second time im trying to install fedora does it need to take this long ? I've got an unexpected fault for the second time and pressed debug but nothing is happening keeps formatting.
View 3 Replies
View Related
May 28, 2011
I switched to Fedora from Ubuntu about a month ago, and I've been very happy so far. But today I started the upgrade to Fedora 15, and something isn't right. I used the preupgrade method, and the package download took a respectable 30-40 minutes, then I was prompted to reboot my machine. I did so, about 4 hours ago. It took about 2 hours to get to the point where it says it's installing the packages, and 2 hours to get to where it is as I write this, at 116 completed packages out of 1634.
I'm pretty sure this isn't normal for ANY distribution. The machine itself is about 6 months old, so I'm pretty sure it's not a hardware issue. I'm considering interrupting the upgrade and doing a clean install, but I was wondering, is there anything I can do before resorting to the clean install option?
View 7 Replies
View Related
Jan 20, 2010
The image disk boots OK and comes to the screen that gives the option to try or install. I opted for the "try Ubuntu" once, but got a long list of i/o errors. Tried the install option, and same thing. The install did get to an apparent Ubuntu background, but never any further prompts. Is the iso bad? I'm trying to install on a Dell Inspiron 7500. Currently has Win2000 loaded.
View 4 Replies
View Related
Jul 6, 2011
Installed Fedora 15, ran the updates, so everything is by default, so the .bashrc file just runs the version in /etc
sftp gives me an error message too long.
I went into to the .bashrc file and commented out the call to the /etc version and I still get the sftp error.
How can this be fixed?
View 1 Replies
View Related
Mar 26, 2010
I have just made a clean install of Ubuntu 9.10 and after installing all updates, GDM is taking a long time (about one minute) to come up after a clean boot, resulting in a regular console prompt.
If I issue "sudo service gdm start" it does come up promptly.
What can I do? Where can I see startup logs to try and identify any problems?
View 5 Replies
View Related
Jul 25, 2010
I have an Acer Aspire 1810TZ laptop with Windows 7 on it. I decided to dual boot w/ Ubuntu 10.04 32-bit Lucid Lynx. I was initially getting this issue
Code:
gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline)
[code]....
View 1 Replies
View Related
Nov 19, 2010
I'm running ubuntu on an i5-650, Intel H55 mobo system. I have 4GB RAM.I was running Lucid (AMD64) very happily, but then had a severe failure of the Samsung HD502HJ hdd (the smart report is showing more than 1000 bad sectors, increasing everytime I try to access the disk).I have replaced that drive with a Seagate ST3500418AS. Using ddrescue I was able to recover all but 9MB of the drive content. However, with my /etc, /proc and /opt directories having gone missing, I decided that attempting to recover the installation was a lost cause so I went ahead and installed Maverick onto the new drive.As part of this process I created a separate partition for my /home directory (recovered from the old drive).
Now, having installed only a few 'essential' packages (eg autofs5), I've realised that a lot of actions are taking well in excess of a minute to take effect. For instance, clicking on 'Places->Computer', it takes approximately 100 seconds before the Nautilus window appears.According to System Monitor, there is nothing using any significant resource during this time - it's as though something is waiting for a timeout to complete before actioning my command.If I look at the processes in System Monitor during this time, I can see that the Nautilus process is showing 'autofs4_wait'.
View 3 Replies
View Related
Jun 3, 2010
just upgraded from 9.10 to 10.04LTS and upon first reboot it gets stuck at the splash screen.. it just keeps loading over and over, nothing happens.I don't have the liveCD as I just did the download from the internet via Synaptic Softwarethis is what I tried:hit ESC when GRUB menu loads.. tried to hit "e" on the boot option and nothing happens.. I was told changing quite splash to nomodeset would fix it but it doesn't even say quiet splash, unless someone wants to walk me through it.I'm soo frustrated, I have tons of e-mails and documents that I need to save.is there a fix to get me back in just so I can copy my emails and docs and do a fresh install?
View 1 Replies
View Related
Nov 19, 2010
I'm attempting to install Kubuntu on a new laptop but seem to be having some strange issues. It's a Dell Latitude E5410 with 160GB HDD, 2GB RAM and Intel Core i5-520M(2.4GHz). I'm trying to install Kubuntu 10.10. When I restart the machine and boot from the CD for an initial install it seems to hang for a VERY long time. It will eventually get to the boot options (after hours) but seems sluggish. Once the install gets going everything seems decent except for that I can't seem to get it to finish. I know the CD is good since I used it to get Kubuntu on 2 desktops and another laptop in the last 48 hours. I've also burned another CD just to make sure. The checksum was spot on. Does anyone know what I can do to get this remedied?
View 1 Replies
View Related
Jun 11, 2010
I keep hearing about how Ubuntu is supposed to be so much faster than Windows 7, but have yet to see any major difference in their boot times. I am dual-booting Windows 7 and Ubuntu 10.04 on an intel Centrino 2 processor with 4Gb of ram and both OS's take about the same time to boot. After I get to the bootmanager to select OS, if I click on Windows 7 it almost immediately goes to the GUI load screen with the windows logo. On the other hand, if I boot into Ubuntu I get a black screen for ~30 seconds before the Ubuntu logo even appears. Comparing GUI boot times, Ubuntu is clearly the winner, but they take the same time total.
Does anyone know what is making the long black screen or how to reduce the time? I would really like to show people how fast Ubuntu really boots.Immediatly before Ubuntu Gui starts, an message shows up for a second saying something like "Unknown adaptor version (2): You may experience some problems", it flies past so quickly that may not be verbatim.
View 7 Replies
View Related
Sep 21, 2010
I'm trying to fix a friends EeePC notebook (Asus) running a recently upgraded Ubuntu 10.04 from Karmic Koala. She used the update manager for the upgrade to 10.04 LTS and everything was fine until she had tried to install something from the Ubuntu Software Center (she doesn't remember what happened). After that, both Update manager and Synaptic stopped working.Update manager gives the following error:Quote:Software index is broken. ... Try to use synaptic for something?!...
Then Synaptic manager gives the following error:Quote:E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem. E: _cache->open() failed, please report.And when I try that command, the terminal just keeps blinking with the cursor and does nothing for more than an hour. This is the output of the comand:Quote:
jasna@Jasna:~$ sudo dpkg --configure -a
[sudo] password for jasna:
Setting up moodle (1.9.4.dfsg-0ubuntu4) ...
[code]...
View 9 Replies
View Related
Jul 18, 2011
I have a Macbook 5,2, on which I'm triple booting OS X - Linux - Windows, using bootcamp and rEFIt.I had a variation of Ubuntu 10.04 called Uber Student as the linux installation.I installed Ubuntu 11.04 AMD64 instead, by choosing the EFI boot option.Now this gave me some problems. When I shot down, the Macbook gives me a troubling long beep sound.When I start up, I'm still able to boot up into rEFIt and Grub2, but there is a big delay with the screen being black for about 30 seconds and the little white light in the left corner of the Macbook is blinking feverishly. I read something about a guy which had a similar problem and the process seemed to mess up the firmware on his Macbook, so he had to have his MB changed.
What's up with the scary beep sound and the long boot up delay?Secondly, when I want to do an update of the Ubuntu system, the update manager asks me to do a partial upgrade, which includes removing the grub-EFI, resulting in a system that won't boot...
View 2 Replies
View Related
Jul 12, 2010
I recently broke down in the face of morbid curiosity and clicked that little version update button. it seems to run flawlessly (after i uninstalled the pesky touchpad) but it takes a long time to boot up now. at least a full minute. is this normal?
I will add also that it said my version of grub had been modified (which i dont remember doing, but may have) so i told it to leave the current one in place.
View 2 Replies
View Related
Aug 14, 2011
I have successfully build .deb im my box and it is running well. But during the debuild process I got followingdpkg-shlibdeps: warning: dependency on libatk-1.0.so.0 could be avoided if "debian/retrovol/usr/bin/retrovol" were not uselessly linked against it (they use none of its symbols).
dpkg-shlibdeps: warning: dependency on libdl.so.2 could be avoided if "debian/retrovol/usr/bin/retrovol" were
[code]....
View 1 Replies
View Related
Jul 13, 2011
I'm new to Debian and GNU/Linux, and I don't know when it is time to update or upgrade Debian, and how to do it in order to avoid breakages
View 4 Replies
View Related
Aug 17, 2011
I have been looking at how to avoid typing my firefox master password. So far no luck.
Do you know of a way to have the master password in a file on a USB stick?
I am also looking for a way to integrate keepassx with firefox. I found passifox at[URL].. It depends on keepasshttp and seems to be a windows thing.
View 2 Replies
View Related
Jul 20, 2015
So I have this laptop with a busted battery, I'm trying to get it into some kind of headless server, media topbox hybrid.
First thing I want to do is being able to leave it shut (powered on) in the corner without having to interact with it directly.
I've setup ssh and vnc so to login remotely and do task, transfer files and etc.
However there is a little issue with the laptop lid down upon turning it on, it immediately goes into suspend when getting to the display manager, which is 'lightdm'.
I suppose this is the default setting for Xorg and as such my custom configs for KDE only kick in after I login.
Question is: I never seen configuration for default power management stuff being done in Xorg, is there some way to disable automatic suspension on lid down?
Another question is: After the KDE kicks in does it always replace power options? I have setup a xorg.conf file specifying dpms options but these don't seem to remain.
View 11 Replies
View Related
Nov 8, 2010
A customer of mine has setup a Debian 5 system enabling root filesystem encryption without really needing it.As long as i have a remote access to the system, i have to ask for his interaction to input passphrase when we do need do a system reboot for a reason.One time the customer doesn't really need an encrypted FS, i ask:Is there any way to decrypt a luks fs? If not, or if it's hard, how do i generate a keyfile to be retrieved from /boot FS which is not encrypted?
View 1 Replies
View Related
Jul 30, 2011
I have a bash script and I'm dropping a file on script launcher shortcut. Everything seems fine, only that after executing the script console window closes, so I can't see if some messages were produced during execution.
As I just recently switched from Windows, this kind of problem is solved there by adding 'pause' command in batch script, on which user has to press key and script will then continue (finish) or by launching through 'cmd /k' which makes console window persistent.
Googling I found about 'sleep' command and more appropriate for me 'read' command, so I did this:
Unfortunately, I can't see any effect of 'read' command as console windows again terminates after execution. Execution is successful BTW. So what's the catch?
View 9 Replies
View Related
