Debian Hardware :: Rfkill Doesn't Unblock
Jan 26, 2015I went to turn my blue tooth off, and my wireless disables... i have done all rf kill and nothing happens...
View 2 Replies
ADVERTISEMENT
Debian :: Avahi Blocks Websites / Unblock Those?
Nov 8, 2010I am using my netbook with Squeeze when I travel. I recently started getting a msg "Network discovery service has been disabled" or something to that effect. And many websites have been blocked as well. I discovered that I could remove avahi-daemon to fix it and I have done so. Unfortunately, the websites are still blocked even though I no longer get the msg. I could not even post this msg here with Linux and had to boot with Windows to do it. It is a shame. Can someone please tell me how to unblock those websites.
View 7 Replies View RelatedOpenSUSE Wireless :: How To Add Rfkill To Startup
Jan 23, 2011my wireless wasn't working because the button to turn it on doesn't work in SUSE.
On 01/11/2011 01:36 PM, lak 726 wrote:
>
> Here it is:
>
> /usr/sbin/rfkill list
[Code].....
My results were good but now how do I add this to start up so I don't have to manually do this every time I boot?
Ubuntu Networking :: Rfkill Does Nothing Under Broadcom STA Driver?
May 3, 2011I've been seeing a lot of people checking for hardware and software blocks using the rfkill command. I can't seem to get it to do anything at all on my Broadcom "4321AG"/"4328" wireless using the Broadcom STA driver. Of course, I have an old-fashioned hardware switch on the front of my laptop.
Here is some information on my working wireless setup (that rfkill can't seem to see):
Quote:
lspci | grep work
03:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 03)
*-network
description: Wireless interface
product: BCM4328 802.11a/b/g/n
[Code]....
When I try rfkill list all, it does nothing, just returns me to my BASH prompt. The wifi, wlan, bluetooth, and wwan identifiers also seem to do nothing with rfkill list. It looks to me like it "hooked" IRQ19 in the BIOS, and the wireless does work quite stably (although it does need several seconds to auto-reestablish wireless when Linux goes to "sleep," say overnight).
This page doesn't really tell me much more than rfkill did with no parameters:
[URL]
Is this just because I have an electromechanical wireless switch, or is it a 64-bit problem, or...
EDIT: Oh yes, sudo rfkill list all also just returns me to my BASH prompt without any whistles or bells (after entering a password)...
Networking :: How To Unblock A Word
Jul 21, 2010I have blocked a word tube in squid proxy it is even blocking all the words contain tube like tubercolosis how to unblock a word
View 1 Replies View RelatedServer :: Unblock The Sites?
Jun 18, 2010In my college all popular sites blocked i am working on linux... is it possible to Encrypt the http request? anyother way except proxy sites
View 2 Replies View RelatedUbuntu :: Unblock A Domain In 7.04?
Sep 17, 2010how can i unblock a domain in ubuntu 7.04 ?
View 1 Replies View RelatedUbuntu :: Unblock A Webpage In 10.04?
Aug 4, 2010I inadvertently blocked a web page and get the following message when I try to open it using Firefox.
"The page isn't redirecting properly Firefox has detected that the server is redirecting the request for this address in a way that will never complete. * This problem can sometimes be caused by disabling or refusing to accept cookies."
I can change users and access the web page or change computers. No other websites were affected. Is there a way in Ubuntu or Gnome to unblock a website to accept cookies?
Ubuntu Networking :: Wireless Suddenly Stopped Working AND Rfkill Command Not Working
Jul 13, 2011When originally installing 11.04 I had problems getting my Ralink 5390 wireless card to work.
Today my computer froze completely and I had to turn it off via the power switch. When I turned it back on, wireless was no longer recognized! My iPod can connect to the network just fine, so it must be an Ubuntu problem. There are no problems with my ethernet connection either.
I researched this and found several threads about blocking and unblocking wireless devices using the rfkill command. Well, unfortunately for me the rfkill command doesn't work. When I type sudo rfkill list or sudo rfkill unblock all, nothing happens; it just returns me to my bash prompt. I even tried uninstalling and reinstalling rfkill...nothing.
Ubuntu Security :: How Can I Unblock Domain In 7.04
Sep 17, 2010Is there someone who can tell me how can i unblock a domain in ubuntu 7.04 ?
View 1 Replies View RelatedUbuntu :: Unblock HamSphere On Xubuntu 10.04?
Nov 1, 2010is it possible to unblock HamSphere on xubuntu 10.04?
View 2 Replies View RelatedUbuntu :: How To Unblock Sites Via Terminal
Apr 5, 2011At school we're running edubuntu and some sites are blocked. I've heard that there is way to unblock some sites via terminal. For example facebook is blocked in our school. Is there any way to unblock it via terminal?
View 2 Replies View RelatedGeneral :: Unblock Facebook From A Computer?
May 29, 2010My husband blocked my computer from facebook. How can I unblock it?
View 2 Replies View RelatedUbuntu Security :: How To Unblock 4662 Port
Sep 5, 2010I must be behind a firewall in this ubuntu 9.10 karmic. i need to access the Standard client TCP port. how to put a port into the firewall so that it is not blocked?
View 2 Replies View RelatedUbuntu Security :: Firehol - How To Unblock Transmission
Jun 15, 2011in my firehol.conf there is: client "http https ftp pop3 pop3s smtp cups dhcp dns lpd mysql ntp rdp smtps samba ssh submission telnet p2p" accept When I put: client all accept Transmission is working as it should. I still want to block unknown clients.How can I unblock it?
View 2 Replies View RelatedFedora :: Command To Undo The Cntrl D To Unblock Site?
Sep 5, 2009not paying attention, I cntrl D and blocked a site that I'm using in my research. what command to undo the cntrl D to unblock site
View 2 Replies View RelatedServer :: Unblock The Sites For A Particular Period Of Time Through Proxy?
May 24, 2011We are using Red Hat linux 4 .We blocked certain sites through squid for certain ip address.we want to unblock these sites in particular interval ,ie during noon time and after 4.00 pm.
Here we have given
In the sites.txt we have given the names the of those sites that should be blocked
The problem is to unblock sites in sites.txt, for particular intervals
Debian :: Dell XPS L501 And Debian - Ctrl+Alt+F1/2/3/4/ Doesn't Work ?
Jan 22, 2011I'm trying to install Debian on Dell XPS L501, and there are lots of problems...
1- Resolution is 800x600! I guess, I need to add that there is no xorg.conf file, and I couldn't create it by running `Xorg -configure`. It said the number of screens didn't match number of detected devices or something like that! I'd be really happy if this gets solved!
2- Ctrl+Alt+F1/2/3/4/... doesn't work! Sometimes Alt+Directional keys works. but most of the time it doesn't!
3- I can't get the loud speakers to work, and I couldn't compile Alsa from source... I'll try again, but does anyone know if there is a specific package I need to install to get them to work? (Realtek ID 665)
4- Keys are not working right... Function keys don't work... But the worse thing, is that if let's say Fn+F2 is supposed to disable wireless, F2 does!
Software :: Spam / Virus Block - Unblock Email With Attachment .zip Should Be All Attachment Through To Email?
Jul 5, 2011how to unblock email with attachment .zip should be all attachment through to my email i have below message when people sent me email to my domain
Warning: This message has had one or more attachments removed
Warning: (the entire message).
Warning: Please read the "Apex-Attachment-Warning.txt" attachment(s) for more information.
This is a message from the MailScanner E-Mail Virus Protection Service The original e-mail message contained potentially dangerous content, which has been removed for your safety. The content is dangerous as it is often used to spread viruses or to gain personal or confidential information from you, such as passwords or credit card numbers.
Debian :: Eclipse Doesn't Start
Jun 29, 2015 have intalled Debian 8 on bi quad cores opteron, also Tomcat 8 and openjdk7 are installed, i have do a mistake about version eclipse because i have installed eclipse Kepler or the lasted version of eclipse is Luna, after douwload Luna, i have deleted eclipse kepler who was installed in /opt directory, i do the command "tar" for luna version, no problems for instaling, but eclipse luna doesn't work.I try many version of luna like 32bits and 64 bits, but nothing to do the IDE doesn't start.
Code: Select allroot@dct-skyned:/opt/eclipse# ls
about_files configuration eclipse.ini icon.xpm plugins
about.html dropins epl-v10.html notice.html readme
artifacts.xml eclipse features p2
root@dct-skyned:/opt/eclipse# ./eclipse
bash: ./eclipse: Aucun fichier ou dossier de ce type
root@dct-skyned:/opt/eclipse#
Debian :: Password Doesn't Work
Sep 21, 2015I cannot log on. I don't know if this is related, I was setting up for remote desktop, setup a password for the remote session. After rebooting, my normal user and password do not work and my rdp password does not work.
View 13 Replies View RelatedDebian :: Sound Doesn't Work
Apr 13, 2016I have a motherboard Gigabyte H110M-H DDR3 1.0 and a VGA Nvidia NVS 300 (It doesn't have HDMI connector, but after Debian installation, it shows audio HDMI), After installling Debian 8.4 Jessie amd64, I noticed the sound doesn't work, the motherboard audio codec is a Realtek ALC887, I don't have a HDMI Monitor, nor my VGA has HDMI Connector, but is a little bit strange that Debian recognizes HDMI Audio, if a run "# cat /proc/asound/cards" it shows me two audio cards, the HDMI and the ALC887 and if I run "# cat /procs/asound/modules", both cards are using snd_hda_intel. It is installed PulseAudio and Pavucontrol, I have checked if the audio was muted, but the sound volume is set to 100%, I don't know what to do anymore... I have a computer with a realtek codec too, but it's another model ALC665 or something like that, and the system is equipped with an ATI HD 5450 with HDMI Audio, I have checked the what modules the Debian is using, and both uses the snd_hda_intel, but the sound works with HDMI and Realtek Codec.
View 8 Replies View RelatedDebian :: No Banshee.sh - Doesn't Exist ?
Aug 17, 2010I was just trying to get the now playing for banshee to show on conky but the way I was going to do it required me to make a wrapper for banshee.sh but I can't seem to find it or it doesn't exist.
View 4 Replies View RelatedDebian :: Webpages Doesn't Load?
Apr 1, 2011I use Debian 6. I noticed that when ever I try to open certain websites, the pages doesn't load at all. This happens when I try to open [URL] and certain other web pages. Browsers like chrome, epiphany, iceweasel, opera all had the same issue. The download speed is pretty normal. note that disabling ipv6 inside the browser configuration didn't help fight this issue.
View 8 Replies View RelatedDebian :: Grub Doesn't See Windows 7?
Jun 12, 2010fdisk -l
Disk /dev/sda: 400.1 GB, 400088457216 bayt
255 heads, 63 sectors/track, 48641 cylinders
[code]....
Debian :: Apt Get Update Doesn't Work
Jan 3, 2011i want to apt-get update. But it is not working.
[code]...
Is it something that is wrong in the source.list?
Debian Configuration :: NIC Goes To Sleep And Doesn't Come Up Again
Aug 5, 2015i have the following problem which i couldnt solve in the past weeks. We have two Server with an onboard "Atheros AR8161 Gigabit Ethernet (rev 10)" and a quad "Realtek RTL8111/8168B" network adapter connected via PCIe. One of the servers is running Debian Wheezy with a custom 3.2.53Kernel (compiled from linus repository) and the second one runs Debian Jessie with stock kernel. Both are running XFCE4.
Each of the computers are connected to a local network (192.168.0.1 respectively .2) and to the intranet of our institute (10.20.0.81 respectively .82). After a random time they are not accessible via the intranet (ping doesnt work, ssh gives no route to host). However, i can still ping them over the local network. Also, at the moment i try to establish a ssh connection over the local network, the computer is again acessible via the intranet.
I already tried the boot options acpi=off and pcie_aspm=off without success. Additionally we switched from the onboard Atheros NIC to the Realtek, but everything stays the same. Therefore i don't believe that it is driver related.
For me it looks like that the NIC goes to an energy saving mode which is not handled correctly by our intranet. However, how can i avoid that the NIC goes to energy saving state? Is there a way to disable the D-states?
Debian Configuration :: Laptop Fan Doesn't Run?
Jul 14, 2011I have installed Squeeze on my laptop, an Acer 5315.The fans never turn on, and the laptop eventually overheats and shuts off.This is not a hardware problem, because Lenny, on another partition, works fine.I have poked around, and discovered that the temperature sensor, as reported by "acpi -V", and in /sys/devices/virtual/thermal, does not get updated. It seems to get read at boot, but the reading never changes, no matter how hot the machine gets.
Specifically, if the machine is cool, acpi reports 40 degrees C, and goes on reporting the same number until the machine overheats and shuts down.On the other hand, if the machine is hot (because it's been running without the fan), and I reboot, then the reading at boot is usually either 75 or 85, and the fan turns on during boot, and stays on, at high speed, until the next reboot, and the reading never changes during the whole time
Debian :: Installer Doesn't See Broadcom NIC's / Do That?
Mar 22, 2011I did a quick Google search and found a few old reports of bugs and miscellaneous postings but nothing hit specifically to my issue. My Dell PowerEdge 2950 server has Broadcom NIC's onboard and when I try to install a fresh ISO of Squeeze and then I tried even Wheezy and both came back and had issues recognizing my NIC's. They asked me to load additional firmware for drivers which I obviously don't have from Dell since they only support Windows O.S. Is there a method or some how I can successfully do a network install (netinst) on this hardware?
View 6 Replies View RelatedDebian :: Installation Doesn't Work
Jun 2, 2010I'm trying to install Debian 5.0x to my miniITX computer.
Setup:
I had this setup running in a previous configuration. The only difference were the disks. I had a 120GB and a 1TB (/home). Because I need more space I swapped both disks for 2 x 2TB.
I tried a 64bit Debian 5.xx stable install. Everything goes fine until the first boot. After the POST and BIOS screen a cursor justs blinks and the computer does nothing. the computer doesn't start GRUB
Well I thought maybe a small error with downloading the DVD so I tried another debian but Testing now. There the setup hangs when it wants to make the file-systems. It says something like can't make ext4 filesystem. I also tried with ext3. So I manually tried to do fdisk and mkfs.ext4 (and mkfs.ext3) for both disks in the console during installation. fdisk works but when I try mkfs.ext4 /dev/sda1 it says that some bin-file is missing? How's that possible on an installation disc? Never ever had that before?
Well after 15 attempts (meanwhile lost 2kg of fingernails)I tried another 32 bit DVD install of Debian 5.xx. It can make the filesystems again and install everything but when it has to boot for the first time it just doesn't. I don't even see GRUB.
Seems to me that the computer doesn't refer to the HD to boot. In the BIOS the BOOT order is just fine (the previous config with the old HD's just worked fine). Even when I put in the install DVD it skips the HD and boots from the DVD?
I really don't get it. The disks are both shown in the BIOS. Is this a hardware or software issue? I think that Linux or GRUB should be able to work with 2TB discs isn't it?