Debian Hardware :: Installed On Lenovo B560 Squeeze?
Apr 22, 2011I have installed on my Lenovo B560 Debian Squeeze and there is one problem. Integrated microphone does not work. Do you have any idea how to solve this issue?
View 2 RepliesI have installed on my Lenovo B560 Debian Squeeze and there is one problem. Integrated microphone does not work. Do you have any idea how to solve this issue?
View 2 RepliesI want to install NVIDIA drivers on my Debian Squeeze so that I can use parallel computing packages like CUDA C or OpenCL for my Master Thesis. I have NVIDIA Geforce 310M.
I found a link in wiki.debian which gives me two ways to install NVIDIA drivers and I want to install the NVIDIA way (non-debian way).I have to stop 'X' and I stopped it by typing 'service gdm3 stop' and then I went to ''init 3'' . Now I want run
'sh /home/swaroop/Downloads/NVIDIA-Linux-x86-270-41.06.run' but its not working.
My broadcom wireless device is of model BCM4313 and I dont find the way to install the drivers.
View 4 Replies View RelatedSound is not working on my new Lenovo B560 laptop with Intel sound card. The sound card appears in the lspci output. But the Preferences->Sound->Hardware menu is empty, not listing any soundcard.ALSA diagnostics are as follows:[URL]When I run "sudo alsa reload" I get the following output:Quote:
[sudo] password for me:
lsof: WARNING: can't stat() fuse.gvfs-fuse-daemon file system /home/me/.gvfs
Output information may be incomplete.
[code]....
I am running Fedora 14 on a Lenovo B560 laptop.This laptop has a hardware peculiarity, namely Nvidia's newest gag: Optimus.This laptop has two graphics cards: an Intel GMA HD (for 2D) and a Nvidia 310 M (for 3D). The Optimus technology automatically activates the graphics card required for the current task.
Now, Optimus on linux is so far officially unsupported by Nvidia.
At the moment, my Fedora runs on the Intel GMA. I personally don't care if Optimus doesn't run on linux if I can somehow manually (even solely) use the Nvidia 310M graphics card.
So far, all my manual attempts in xorg.conf to speak to this card fail with the X not starting and the well-known "Screen not found" error.
Does anyone have any experience with this or ideas how to activate the Nvidia card?
i have debian squeeze installed on my lenovo t61 notebook with intel wireless 3945 firmware.
i've installed the firmware-iwlwifi package but cannot get any wireless connection.
i'm using the fluxbox dekstop with wicd network manager.
i've searched around on the debian user forum archives and the internet but have yet to find a solution for this. it seems most people have just installed the firmware-iwlwifi package and then wlan was working.
i had ubuntu installed on this machine before with wlan running, so i know that there is nothing wrong with my hardware.
I installed Firestarter firewall on debian Squeeze.Now i note there is a gui available in System->Administration which apparently does not need to be running all the time - its not set up to start on boot.When I boot I notice the boot message has a line saying "Starting Firestarter firewall .... failed"When I am logged in and type "/etc/init.d/firestarter status" as the Firestarter FAQs say, I get"Firestarter is running... ... (warning)"I can run the gui manually and still same message.
View 2 Replies View RelatedI have installed Debian Squeeze 6.0.1a i386 via download DVD image from [URL]. Eventhough I specifically selected "Desktop" from installation menu, only basic system is installed.
I have only 1st DVD, which I understand is sufficient for desktop setup. if I have missed any of the steps or any saperate installation is required.
I bought a netbook with an i5 460M (64 bit). What version of Debian squeeze do you suggest to install to have maximum benefits?
View 1 Replies View RelatedI installed Debian squeeze on my old Dell Latitude C600 laptop. I Installed it from a cd that worked to a friend of mine. I finished the installation successfully. After booting the computer I can get to the grub screen and after choosing the OS (Debian GNU/LINUX, with linx 2.6.32-5-686) I see the computer loading and running command lines, but after few lines, I get black screen and I hear the computer "working" but can't see anything and it doesn't react to anything that I do.
View 9 Replies View RelatedI“ve read lots of out-of-date guides on how to install Skype on 64-bit GNU/Linux, but has anyone managed to do it on Squeeze.
View 14 Replies View Relatedi got a copy of CD1 from [URL]. And then, i noticed there was no gdm(X server) installed. Is it different from Lenny? It is possible to install X from the CD?
View 5 Replies View RelatedI just installed squeeze and at finish it asked me if it write the MBR with gurb.
I say yes, but after restarintg, squeeze doesnot appear in grub.
I also have lenny in the same PC. code...
How can I run squeeze I just installed.
I am running Debian Squeeze 32bit with gnome-core installed. When I alter the acceleration or sensitivity within the pointer speed section of gnome-mouse-properties, my mouse does not act differently. Has anyone else encountered this problem? How can I change my mouse sensitivity? I have installed Debian Lenny previously and I recall that I was capable of changing the sensitivity.
View 1 Replies View RelatedJust installed squeeze and noticing slow responses to ping. Ping with -n is fine, and as expected. Ping without -n is very slow to appear on the screen.
ben@WOPR:~$ ping google.com
PING google.com (74.125.230.114) 56(84) bytes of data.
64 bytes from 74.125.230.114: icmp_req=1 ttl=54 time=26.2 ms
64 bytes from 74.125.230.114: icmp_req=2 ttl=54 time=25.9 ms
64 bytes from 74.125.230.114: icmp_req=3 ttl=54 time=29.3 ms
64 bytes from 74.125.230.114: icmp_req=4 ttl=54 time=25.5 ms
^C64 bytes from 74.125.230.114: icmp_req=5 ttl=54 time=25.8 ms
--- google.com ping statistics ---
5 packets transmitted, 5 received, 0% packet loss, time 20199ms
rtt min/avg/max/mdev = 25.514/26.569/29.308/1.399 ms
ben@WOPR:~$ ping -n google.com
PING google.com (74.125.230.115) 56(84) bytes of data.
64 bytes from 74.125.230.115: icmp_req=1 ttl=54 time=25.6 ms
64 bytes from 74.125.230.115: icmp_req=2 ttl=54 time=26.0 ms
64 bytes from 74.125.230.115: icmp_req=3 ttl=54 time=26.8 ms
64 bytes from 74.125.230.115: icmp_req=4 ttl=53 time=21.5 ms
^C
--- google.com ping statistics ---
5 packets transmitted, 4 received, 20% packet loss, time 4006ms
rtt min/avg/max/mdev = 21.540/25.042/26.859/2.064 ms
I've tried disabling ip6, disabling avahi and adding options single-request to my /etc/resolv.conf - problem remains. If it helps when installing Squeeze was prompted to install firmware-realtek, which I didn't have. So downloaded onto usb from another machine installed once setup was complete.
I could not get the hardware to work with Lenny's ancient drivers, so I gave up and decided to upgrade to Squeeze.Well, the hardware works (except sound), but KDE4 is a such a disaster that I want to run not walk! all the way back to Lenny. I'm stunned that after four years of active development, this desktop still doesn't have something as basic as keyboard shortcuts or the ability to place icons where YOU want them.
The widgets frustrate me to no end. The new K menu is impossible to navigate. I'd rather hang myself than use Dolphin as a file manager. KDE4 gives me more notifications than MS Windows' crapware. And it's UGLY !!! The "Oxygen" theme makes me want to tear my eyeballs out.
Installed gfax on Debian Linux i386 squeeze.Also installed: libc-bin libc-dev-bin libpaper-utils.Also upgraded: libc6 libc6-dev libc6-i686 libmono-corlib2.0-cil libmono-security2.0-cil libmono-system2.0-cil locales mono-2.0-gac mono-gac mono-runtime.
It fails to work. As user:
francesco@deb32:~$ gfax
Unhandled Exception: System.UnauthorizedAccessException: Access to the path
[code]....
Hi,I'm using a Dell Lattitude D620 laptop. I just installed the latest kernel 2.6.38 in my Squeeze amd64 :
Output of uname -r
2.6.38-bpo.2-amd64
Now I'm running on new kernel,everything seems fine except my wifi ( now I'm connected through ethernet ). Before I do the process with the guide in http://wiki.debian.org/wl to activate my wifi,I'd like to ask for some advice here,is this latest kernel support my wifi card? If yes,how to activate it?
Output of lspci :
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
[code]....
i had windows 7 on my system and now i installed debian squeeze but grub does not show my windows 7 in menu for selecting how could repair this problem?
View 4 Replies View RelatedI have installed vmlinuz and initrd.gz (squeeze) in /boot/newinstallation and added to Grub the lines:titleNova InstalaĆ§Ć£oroot(hd0,0)kernel/boot/newinstall/vmlinuzinitrd/newinstall/initrd.gzNevertheless, when I choose this option at the grub, it begins to start the kernel vmlinuz and thus restart the system. The installed Debian Lenny boots in a normal way.
View 10 Replies View RelatedI just installed linuxmint 10 in my lenovo s10e and cant get the wireless to work
View 14 Replies View RelatedI was finally able to successfully install debian Squeeze on my Netra X1. Upon bootup, however, I get a scrolling message saying:[ 206.790092] eth0: (71) System Error occurred (2)Not really sure what this is about. I never received this when I had it running Solaris or FreeBSD or even Ubuntu's older SPARC versions.I also know that it's unlikely to be a bad ethernet card, since Debian was network-installed, and I never came across this error before.
View 1 Replies View RelatedI am still running the linux-image-2.6.32-5-686 kernel a computer with squeeze. I installed squeeze on it when it was unstable. I would like to bring up to the new stable state.Should I do apt-get install linux-image-2.6.32-5-686or should Iapt-get dist-upgrade
View 1 Replies View RelatedI'm new to Linux and I'm still trying to make my linux work on an external drive. I think I have found how, but I need to use the pipe symbol in a command line and I don't have it on my keyboard.I've tried different settings for my keyboard and different language, but nothing seems to do; I try all the keys, with shift or alt, but nothing works.I'm working on Debian, Lenny, with a Lenovo 3000 v100 Laptop. Nowhere on my keyboard do I have the symbol I am looking for. I have the vertical bar divided in two, but not the continous one.Do I need somehow to remap my keyboard or add a function to a key?
View 3 Replies View RelatedI'm trying to change the backlight via xbacklight but this is not working. Although
Code: Select allxbacklight -set X
causes
Code: Select allxbacklight -get
to return X, the real monitor backlight is unchanged.
The XF86MonBrightnessDown (fn+some-key) isn't working either, although it may have been working earlier.
How can I further debug this issue?
Why are the extensions ["", "txt", "text"] "not allowed" for upload?
I tried stracing the xbacklight call, I'm including the output, but I can't make anything out of it.
Is there a way to do this via xrandr or is there a lower-level way?
how to use 5GHz on my laptop? It's Lenovo ideapad Y580, router enabled dual band. However, these are results from terminal:
iwconfig wlan0
wlan0 IEEE 802.11bgn ESSID:"BTHub..."
Mode:Managed Frequency:2.437 GHz Access Point: 00:E9:...
Bit Rate=130 Mb/s Tx-Power=15 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
Link Quality=70/70 Signal level=-36 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:67 Invalid misc:252 Missed beacon:0
I could not get wireless connection during the Debian Testing (LXDE) installation and am wondering how I can setup wireless connection now. Here are the details:
- Hardware: Lenovo Thinkpad X1 Carbon (3rd gen., 2015, core i7, 256GB, WHQD display)
- For installation, I used [URL] .... -> debian-testing-amd64-lxde-CD-1.iso
- During the installation process, I received a message that the following files are missing: iwlwifi-7265-8.ucode, iwlwifi-7265-9.ucode (strangely (to me), they were mentioned twice, so 4 files). I was asked to provide them on a USB stick
- I went to [URL] ...., downloaded firmware-nonfree_0.43.tar.gz and put the files iwlwifi-7265-8.ucode-22.24.8.0 and iwlwifi-7265-9.ucode-23.214.9.0 on a USB stick (FAT32 formatted). They were not recognized. Also not after renaming precisely to the file names I was asked for (what should I have done in this case?)
- I then simply continued the installation (flawlessly) without internet connection
- How can I now set up wireless connection?
I'm new to Debian but an Ubuntu user for 3 years. I tried to use commands from Ubuntu (ipconfig...) to figure out more, but they were not available.
Recently purchased a Lenovo B40-70 Dec 15 Make and isntalled Debian Jessie as the only operating system. Everything seems to work fine except internal microphone.
I have entries under ports of pavucontrol
- Internal Microphone
- Microphone (unplugged)
I changed amplification levels of left and right channels (as some suggested having right and left at same level cancel each other thus producing no audio). I've added entries such as Code: Select alloptions snd-hda-intel model=laptop to non existing alsa-base.conf in /etc/modprobe.d/. - No effect
Haven't seen Lenovo internal microphone problems offlate in forums or QA Boards, so asking it here again.
Also, I'm planning to buy a USB microphone : [URL].....
Will this work out of the box to make skype calls ?
As the title states, I'm having trouble getting WiFi working. I do have the firmware-realtek package installed.
lspci gives out the following information only:
Code: Select all01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 03)
I can't connect using wireless connection because it is disable (the light indicator is off) after I pass the grub, but it works fine in win 7. does anyone know how to enable it?lspci output said my wireless module is broadcom 4313.
View 2 Replies View Related