I have Audio and Video over HDMI separately, but when I try to watch a movie, I just have Video.NVIDIA HDMI is my default, I'm using "Debian lenny amd64" and kernel is "2.6.32-trunk" on "Studio XPS 13" with "KDE 4.3".
View 2 Replies
script which adjusts my NVIDIA settings to HDMI and also my Audio output to my digital output. I feel its quite a lot of clicking to get my signal to my LCD.So I hope somebody already had this idea and can give me the script or can assist me in writing it myself. I think its not a complicated script. i guess its only 2 lines. But i am not exactly a pro in Ubuntu..So as i said i have a NVIDIA graphic cardand aplay -l shows
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog]
Subdevices: 1/1
[code]...
I have ATI graphic card with HDMI video and Audio:
I see that I have HDMI connector and S/PDIF connector on the mortherboard, I just have HDMI connector on the monitor, I have no problem with the video but the audio does not work, I just want to confirm that the audio should also go throught the HDMI cable right ?
Here is the output from the alsa-info.sh script.
I get picture through the hdmi connection of my Radeon HD 4670 card, but when I tell the system to use the audio not only do I not get anything it also speeds up any video currently playing.
View 10 Replies View RelatedI am new to using debian and have decided to build a Haswell-based i5 NUC (D54250WYK) to run Kodi. I have everything running smoothly until I realised that there is no audio.
I ran the aplay -l command and it only showed
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 1: ALC283 Analog [ALC283 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
but no HDMI
A lot of people recommend the following commands :
-sudo add-apt-repository ppa:ubuntu-audio-dev/alsa-daily
-sudo apt-get update
-sudo apt-get install oem-audio-hda-daily-dkms
and then reboot the device, but when ever i try and run it, the last step i get the "E: Unable to locate package oem-audio-hda-dkms" error.
I am trying to get audio to play in tv/monitor via HDMI cable. It seems ALSA does not recognize my nVidia audio device and can only use the onboard audio device. Here's some relevant info I have collected:
[Code]...
I recently switched over one of my Ubuntu machines to Debian Wheezy. On the Ubuntu system I was able to get the HDMI audio working by adding radeon.audio=1 to grub. I've tried this on this system to no avail. The fglrx-legacy-driver causes underscan and I'd like to avoid it if possible for convenience.
Things I've tried:
fglrx-legacy-driver - Introduced underscan while not solving the problemradeon.audio=1 in grub boot line - No effectGoogling for several hours - There's a lot of topics about this, but most are old and irrelevant, and the ones that are current enough didn't solve my issue.Yelling at it - HDD light blinked a few times, no change
lspci shows
Code: Select allAudio device: Advanced Micro Devices, Inc. [AMD/ATI] RS780 HDMI Audio [Radeon (HD) 3000 Series]
I am running a small Debian Jessie installation on my Zotac Nano AD10 (based on AMD's E-350, Radeon 6310). I use it as an MPD server, it outputs to my receiver over HDMI.
Up until kernel 3.11 that works fine. My GRUB command line looks like this (default grub.cfg file):
Code: Select all$ grep radeon /etc/default/grub
GRUB_CMDLINE_LINUX_DEFAULT="quiet elevator=noop radeon.audio=1 radeon.dpm=1"
Up till 3.11, this worked fine. The available outputs in alsamixer are unmuted [00]. Aplay reports this:
Code: Select all$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
I also set the HDMI output as system-wide default:
Code: Select all$ cat /etc/asound.conf
pcm.!default {
type plug
slave {
pcm "hw:0,3" # HDMI audio
}
}
Running speakertest on device 0,3 though, - no sound:
Code: Select all$ speaker-test --device plughw:0,3
speaker-test 1.0.27.2
Playback device is plughw:0,3
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 16384
Period size range from 32 to 8192
Using max buffer size 16384
[Code] ...
I've tried fixing this repeatedly (3.12, 3.13, 3.14) but everytime i find myself returning to 3.11 because that keeps working.... Some posts suggest running xrandr could get it working, but this is a headless installation, so I cannot use xrandr.
For reference, OpenELEC works on this same system (separate install), and they're up to 3.14 as well. Never had a problem with OpenELEC and the audio not working.
When i was using windows it shows up and works, so thus it has to have the hardware onboard and the support for it sans the driver. It's incapable of working, i don't know why but it's not listing it, and it's just not working with it. I've tried a million times before to find a fix and they only have them for the desktop drivers and not the mobile ones. I was glad to see that i could finally use a second monitor correctly in linux now but the hdmi audio thing is driving me loopy and there doesn't seem to be anyone else who has posted with this issue before.
[list=] aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC663 Analog [ALC663 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
[Code]....
I realise this is an issue that has been covered a lot, one way or another, but at least from what I've been able to find, most of the discussion centres around getting HDMI audio to work. However, I have problems even getting the video to work from my laptop's HDMI output.
I have an HP dv6z-se, with an ATI Mobility Radeon HD 6550 (1 Gb) video card and using F14/KDE. My problem is that when I go to System Settings/Display/Monitor, Fedora doesn't actually seem to realise my computer even has an HDMI output and only displays options for VGA and my integrated screen.
When I plug it into my LCD screen, sometimes I get a 'No Signal' message and sometimes I get garbled static and a message about unrecognised input and the frequency it's coming at.
I read elsewhere in the forum that someone was able to get video working by editing their xorg.conf file, so I went in and tried to see if I could replicate that, but none of the files in my xorg.conf.d folder had anything related to video outputs (as far as I can tell at this point).
I'm using Debian Lenny with an nVidia 8400GS. Before I changed motherboards (and graphic cards, as apparently AGP doesn't exist anymore) this set-up worked fine, but with the new hardware, I can't use the TV as a second screen anymore: there's simply no image going through. All that's visible on the screen is "No video signal".I've tried the proprietary nVidia driver and nvidia-settings, but nvidia-settings doesn't even see the second screen. I've tried adding it manually to xorg.conf, but again, nothing.
View 4 Replies View RelatedI intend to update my video card to allow the operation of all three of my monitors in a triple monitor configuration. I have a 790i motherboard with Nvidia chips, so I will most likely choose an Nvidia card for the upgrade. As I will need connections for three monitors, I will have to have two cards. It is my intention to have one large screen field spread across all three monitors. I assume the best way of doing this will be to use an SLI Bridge to link the two video cards. Thus the two video cards must be identical.
Question 01: Is this the best way of realizing a triple monitor setup?
While I am upgrading, I desire to also give the system the ability to play Blue-Ray High Def Movie one of the 1920x1200 monitors I will be using.
Question 02: What are the pitfalls of playing BD-Discs on Debian. I know I will be eventually acquiring a BD-Disc player (once the prices come down a bit more), but when shelling out for two video cards, I better think as far ahead as possible and get the two video cards that will do everything I can foresee them needing to do.
Question 03: As all of my monitors have HDMI input ports, I assume that I will need Video cards that have HDMI output ports to play full 1080P movies. Is this a valid assumption?
Question 04: Can anyone recommend a video card that does what I am wanting it to do? (This is to say Two Dual Link DVI connectors and an HDMI connector per video card with standard and high definition video playback capabilities). Keep in mind that I will most likely need to purchase two of them, to the Super Expensive Bleeding Edge cards are probably not going to be a practical option here.
Question 05: Is there a way that I can just play the BD-Discs with full resolution in a window on one of the three monitors I will have connected to the computer without having to go the HDMI route?
I have a problem with avconv. Most of the use cases work spledidly, but when I need to crop a segment and then splice multiple segments together, I get problems.
The process I use is this:
1. Raw recording of short segments in high-quality AVI, These are produced by avconv, some as screencast and some by combining a PNG file with flac audio from audacity.
2. Conversion segment by segment into mp4 and ogv
Options A: -acodec aac -strict experimental -ab 128k -ac 2 -vcodec libx264 -s 640x480 -pix_fmt yuv420p -movflags +faststart -crf 22
Options B: -acodec libvorbis -ab 128k -ac 2 -vcodec libtheora -s 640x480 -b 500k
3. Splicing of the segments using MP4Box or oggCat.
(I used to do this in ffmpeg, but I have not figured out how to do it in avconv.)
This works.
In some cases I need to crop the segments, using the copy codecs and the -ss and/or =t options.
If I crop the AVI segments (between 1 and 2) the sound is clipping (this also generates a spree of error messages `Non-monotonous DTS'). If I crop mp4/ogv segments, (between 2 and 3) the remaining video, after the cropped segment are out of sync. I get the same problems with both OGV and MP4 playing them in vlc. Playing the mp4 directly in iceweasel works as it should.
I have recently swapped over to debian (KDE 32bit) from linux mint, however vlc only plays audio, no video (This is for .avi's, .wmv's and rtsp streams, probably others but that what i have available to try). I've installed debian multimedia and dragon player will play .avi's fine, though crashes with .wmv's .
Output if i start play a video vlc through terminal
VLC media player 1.1.3 The Luggage (revision exported)
Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS")
[code]....
Miro won't play audio cd and dvd video!!! I am using Miro 4.0.1 and I can't a play a simple audio cd or dvd video. I have "show all devices and drives" checked. My audio cd and dvd video doesn't not show up on the left pane like it does on iTunes, totem, etc.
View 6 Replies View RelatedI have the Debian 8.1 problem on the Intel Broadwell system , there are some issue which we have been found below.
1.Onboard eDP panel is not work.
2.Onboard DP audio has no sound
3.Intel WLAN is not work.
4.Intel onboard LAN is not work.
OS : Debian 8.1
CPU: Intel i5-5300U
Graphic : Intel HD Graphics 5500
Wireless : Intel wireless 7265AC
I have been using Linux Mint for the past two years, I am interested in using Debian as my desktop OS.By default Linux mint can play all the audio and video formats
View 8 Replies View RelatedI am on Squeeze. In the past I have successfully extracted audio from video files. Recently when I try it I get an unplayable file, just some brief noise nothing more. Mplayer on the other hand plays every video and audio file out there. Is there something wrong with mplayer? I installed mplayer from the repo. I haven't compile mplayer since before Lenny.
View 14 Replies View RelatedI recently put together a small computer on which I'm running Ubuntu 10.04. The plan here was to test the motherboard out for use in a HTPC running linux, and using smplayer and vdpau (not exactly sure if that's the way to say it), I'm running video just fine out of my HDMI cable, but I'm not having any luck getting any audio.
My motherboard is one of those Zotac Ion Itx G-E with an NVidia Geforece 9400 thingamajig. Customer reviews on New Egg said it handled Linux and Mythbuntu well, and that was my reason for making this purchase. When I recieved my motherboard, I loaded Ubuntu as the instructions said I should, and then I attempted to load the disc with the drivers and that failed. Apparently, the disc was designed to run in Windows. I downloaded drivers from the Zotac website which were supposedly designed for linux, however I haven't had any luck installing these. The terminal keeps saying I need the installer.
I am big fan of Ubuntu and presently doing a lot of research on switching over to Ubuntu from Windows environment.
First things first
My desktop basic hardware specs
Motherboard: GIGABYTE MA790XT-UD4P
CPU: AMD PHENON 545
GPU: NVIDIA GT240 (1GB)
RAM: 4GB
POWER: 650W
HDD: 1TB
I am using Win 7 64bit and installed Ubuntu 10.10 64bit Ubuntu installation went smooth and it got updated...
Everything is fine except couple of things
1. No audio output from HDMI.
2. No Multitasking.
I will elaborate the above issues
1. My comp display is my LCD TV which is connected by HDMI cable, usually I get sound from TV speakers when I use Win 7, however in Ubuntu there is option to select the sound output by HDMI but even though after selecting nothing happens...
2. Whenever I am to listen to music in Ubuntu and if I am doing some other work like copying files or opening multiple files or burning DVD's, music gets stuck or it plays pause by pause...so multitasking problems...
I have been trying for a while now to get the audio over HDMI working from my PNY G210 graphics card and mythtv but with no luck.
I have followed this guide [URL]
prior to following this I only had my motherboards on board audio showing up but I am now at the stage that I can see the HDMI audio and select it and un mute it but still cannot get any sound out of it.
As a side effect after following the steps from the link above, now every time I boot the computer up my on board audio is muted so I need to un mute it from sound preferences.
This is my audio config as it stands:
scott@MythtvFrontend:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 0: AD198x Analog [AD198x Analog]
Subdevices: 1/1
[Code].....
The mother board is a an ASUS MN32-SLI deluxe and I have 2 graphics cards in it, a 9600GT to run the 2 monitors connected and a G210 which I would like to use to connect to my TV using the HDMI output. At the moment I am using the VGA output from the G210 to the TV and a separate audio out from the computer which was working fine but the audio is now always muted on startup.
I don't think it is an issue with my mythtv settings as I cannot get any audio over the HDMI using speaker-test (on board analogue audio works ok).
I have a Mythbuntu 9.0.4 fresh install and seem to be having issues with audio over HDMI. I can get audio over the headset output (green round port).
I am guessing this probably has something to do with the default sound card that is used to output when I play something, say internet radio. how to configure Ubuntu to use the HDMI output as default.
The motherboard is: [URL]
Output of the following:
$ cat /proc/asound/cards
0 [SB ]: HDA-Intel - HDA ATI SB
HDA ATI SB at 0xfe7f4000 irq 16
1 [HDMI ]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xfe9e8000 irq 19
[Code]....
I have a Nvidia GTS 450 GPU with HDMI. I want to have the audio on my TV that's connected with HDMI cable. But for some reason I'm not able to get the audio working. The card has its own audio chip. In Yast and pulseaudio I can see the card. But when I select it for playing audio it will not play on my TV.
Changing the cable doesn't work and don't know what to do. Every thing on the internet I have tried doesn't work. Here are some settings (if you need more just ask): Using openSuSE 11.4
Code:
cat /proc/asound/cards
0 [NVidia ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xf7f78000 irq 21
1 [NVidia_1 ]: HDA-Intel - HDA NVidia
HDA NVidia at 0xfbefc000 irq 16
[Code]...
I've got a new machine with an Nvidia GeForce 210 graphics card with HDMI output. I'm trying to get sound to go out that HDMI cable, but although the device shows up on lspci, I can't get it acknowledged by aplay -l, which lists the audio devices known to the audio driver.
lspci shows (in part): 00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)01:00.1 Audio device: nVidia Corporation High Definition Audio Controller (rev a1) The first is the motherboard audio, and it works fine. The second (I assume) is the graphics card with HDMI. But aplay -l lists only the motherboard analog and S/PDIF outputs:
[Code]...
I can't see how I'm going to select a device that the drivers think isn't there. how to make that device visible to the sound drivers? I'm running Ubuntu 10.04 with a 2.6.32 stock kernel. The Nvidia driver version is 195.36.24.
I'm able to get HDMI audio/video perfectly when I'm playing a dvd on mythbuntu. However, If I try to play the ripped version or any other video that is on the hard drive, I get no Audio?
I've checked alsamixer to make sure the device isn't muted.
If I use vlc media player I don't have any audio either. Is there a way to enable hdmi audio as default?
I have just build a HTPC with an Intel DH57JG Mini-ITX motherboard. The motherboard supports HDMI Audio but I just can't make it work.
View 8 Replies View RelatedI've been googling and searching these forums and I can't find a fix. I just discovered that I have a headphone jack on the bottom of my monitor and it would be a lot more convenient to use that rather than the jack on my tower. However, when I switch to HDMI audio output I don't hear anything. I now it's not my cable because it works on my HDTV and throughput audio fine.
I have Ubuntu 9.10 with the Asus M4A78T-E mobo with integrated ATI HD 3300 graphics. I am running the official drivers from ATI, ATI Catalyst 10.3 Proprietary Linux x86 Display Driver, the latest and greatest, not the one from Synaptic. I know this is a bad time to be looking for a fix since 10.4 is out in 8 days but if anyone knows a quick fix that would be great.
I currently installed ubuntu 10.04 and I am having trouble getting sound from my monitor. The monitor that I have is a HANNS-G HH251. It is connected to a Sapphire 4850 Video card through a HDMI wire. The monitor has audio when I boot it in windows7, but there is no audio when I use ubuntu 10.04.
View 5 Replies View RelatedI am running 10.04 with an integrated Radeon HD3200 card. When I set up the tv through hdmi, the sound works perfectly; however, when I switch to analog audio to play something else, the next time I try to use hdmi audio I get nothing. It shows to have good level through Pulse Audio Volume Control - shows like there is a sound coming through it, but I get no audio through the tv. The only way I can fix this is by uninstalling proprietary drivers and reverting back to generic configuration and then reinstalling proprietary drivers. I have to revert back to generic in order to get the sound working again.
View 1 Replies View RelatedI have a dell 1525 laptop with ubuntu 10.10 . Just made the switch from win vista . Everything seems to be perfect, wireless, video, ect. However no audio on my onboard hdmi port. The video is displayed perfect runs very smooth. This could be my lack of knowledge on ubuntu just not understanding what settings to change maybe no driver for the hdmi audio. I would like to add that the laptop onboard speakers work fine.
View 5 Replies View Related
