Debian :: Dual Boot - Parallel Computing
Oct 11, 2015
I was asked to research if it is possible to install a Debian distribution of Linux to HP Z420 Workstations as second OS (dual boot) in our lab. The lab is normally used for Computer Aided Design (Windows 7). The plan is to have parallel computing possible with these workstations on Linux side.
The link for HP Z420 Specs suggests amd64 distrubition should be supported. Tell me If I'm wrong as I have always been interested in software side of things.
Looking for info regarding installation of Debian to HP Z420 workstations as well as using these computers for parallel computing with Debian.
View 2 Replies
ADVERTISEMENT
Jul 29, 2011
I came across some problems. I need to conduct parallel computing on CUDA. I input "uname -a"and read these: "Linux BXSJC 2.6.38.8-35.fc15.i686 #1 SMP Wed Jul 6 14:46:26 UTC 2011 i686 i686 i386 GNU/Linux". I use CUDAtoolkit 4.0. when I input: cd /home/bxsjc NVIDIA_GPU_Computing_SDK/C and "make -i ",the computer returns
[Code]...
View 7 Replies
View Related
Apr 5, 2011
Does Debian 6 "Squeeze" automatically run boot processes in parallel if not how do I
configure it to do so. Here is the quote from my /etc/init.d/rc :
# Specify method used to enable concurrent init.d scripts.
# Valid options are 'none' and 'makefile'. Obsolete options
[code]...
View 2 Replies
View Related
Apr 5, 2011
I have just installed Ubuntu (/dev/sda7) and Debian (/dev/sda4), but since I have updated all informations on Ubuntu, then Debian did not appear anymore on the grub list. There is an wiki I have found, but I an not really sure about what to do.
Here are the boot informations:
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Grub 2 is installed in the MBR of /dev/sda and looks at sector 488861020
of the same hard drive for core.img, core.img is at this location on
/dev/sda and looks on partition #3 for (,gpt3)/grub.
[Code]...
ps: on this file, it says that the /boot is installed on the MBR and /dev/sda3. I will remove the boot from MBR as I am now using /dev/sda3 instead. Sorry for my english
View 7 Replies
View Related
Dec 16, 2010
This is the third time I try unsuccessfully to install Debian as a second OS on a hard drive. When it gets to the end of the installation process the installer asks whether I want to go ahead with the Grub Boot Loader, I choose yes. The end result is however that I can't boot that partition within the hard drive -- i.e., Debian. Can someone tell me what is going on? Should I not use the Grub Boot Loader when I have more than one operating system on a machine? Should I not install Grub on the Master Boot Record (MBR)?
View 3 Replies
View Related
Apr 17, 2011
Before the installation, I had triple boot of WinXP, Win 7, Ubuntu 10.10. As you can guess, the main boot-loader was grub. The second is Win 7 boot loader, and there it gives the option what to choose, load XP or Win 7.I made a decision to remove Ubuntu and install Debian(you know better than me why I did). So first, I searched a guide how to un-dual-boot. It told me to delete the two partition that Ubuntu use(swap and ext4) and write to MBR the win 7 boot-loader(using EasyBCD), so I delete them and use EeasyBCD. At this stage, I had 2 partitions: NTFS for XP and NTFS for Win 7, and the Win 7 boot-loader(and XP) worked pretty well.I install the latest testing of Debian(6 RC2) from DVD1 using this guide, except I choose to use the graphical installer, ext4(not ext3 as there), install the desktop environment, and choose to install grub(even know it didn't asked me). The swap partition I set is 3 GB because my RAM is 2 GB, even know that ubuntu set it in the past to 2 GB.The installation went pretty well, just when come to grub package, it says that there was an error with installing grub package(it didn't told me what), I had no choice, so I choose to skip over grub/lilo and finish with no boot manager. I was thinking to myself: "So I couldn't install grub, at least I have the Win 7 boot-loader(which contain XP loader), and maybe Win 7 boot-loader will recognize Debian too.". But I end up with no boot at all.It told me than when choose not to install boot-manager that I need to load /vmlinuz and give it the parameter root=/dev/sda4(my deb partition).I think that if I could install grub, I could load all my boots("sudo grub update" right?).How can I fix it?
View 3 Replies
View Related
Jul 2, 2010
My boot time seems to be relatively slow & looking through the log file I notice that "ppdev: user-space parallel port driver" takes about 25 seconds to load.Is this normal/necessary to load? My laptop is a toshiba satellite pro running 10.04.
View 3 Replies
View Related
Oct 25, 2010
I was thinking of buying Debian with the five DVDs of software from their co. Is this possible with Mint or Ubuntu or Fedora...? Does Debian have good security from data theft...? Password protection and encryption, I never needed it before now so much.
Can Debian dual boot with XP? Is WINE effective in Debian? I heard Debian has a lot of software, compared with say Slackware which it's users love however saying the software is upgraded better. Any comments? And Mint has all Debian and Ubuntu software available, sadly for me, I found it had a fault built in in Mint 9. I use a Pentium 4 dual core with 3Gb RAM and a NVIDIA graphics card built in with 512 Mb RAM of it's own.
View 1 Replies
View Related
May 5, 2011
I have a printer that is not getting a device node assigned at boot.The printer is attached with a USB to Parallel (IEEE-1284) adapter cable.When I plug in the usb cable when the machine is running, the printer is assigned the device node: /dev/usb/lp0
I am guessing that during startup, the printer device is not detected since it is plugged in over an adapter cable which may be considered a device in itself?This is for a retail store, and we rely on the printer to pop the cash drawer open, so it kinda has to work without a "secret handshake".Unfortunately our workstations do not have Parallel ports. I would be happy to share terminal output, udev info, I'll write you a poem but I could sure use a helping hand- I'm stumped!
View 5 Replies
View Related
Jul 22, 2014
I am trying to replicate what is happening on this page under the tcsh shell, but using the bash shell found in Wheezy. Here is the page I am referring to:[URL] The command I am trying to replicate is on page 6 under figure 2.4. The command is "prompt> ./mem &; ./mem &".
I would like to run the same program twice, concurrently, but do not know how. Note that I am not trying to use a bash script, but rather by simply using syntax on the command line.
View 4 Replies
View Related
Mar 6, 2015
Is it possible to install Windows XP on a machine that already has Debian 7.8? I find lots of articles on installing Debian after but not before XP.
I would like to get a prompt at startup to select Windows XP or Debian 7.8 and then choose which one I want. The reason I want to do that is because I have Guitar Pro on XP and cant find anything as good and also I want to watch Netflix and cant seem to be able to find a way to do that on Debian 7.8 except windows emulator which defeats the point of Debian anyway. Also my Epson V500 will not work on Debian 7.1 and I have tried everything, been to Epson, installed drivers etc..
View 3 Replies
View Related
Apr 14, 2010
I have Lenny installed & it works fine, in a few days will add Windows 7 (want to dual boot - 1 250 GB hard disk) used gparted to free up lots of room for Win 7
- My question is this, Debian then Win or Win then Debian (I want GRUB to manage both so hope since Lenny is installed Win 7 will use the free space no problem) ?
View 3 Replies
View Related
Sep 11, 2011
One of the things holding me back from building a new system with nothing but Linux is the vague possibility that that I might need to use some proprietary program that only works on Wind'ohs in the future. So far it has been easy to keep dual boot systems around, but a new system will be > 4 Gb of RAM of course, so I can't just install one of my copies of Win XP on it. But buying a new 64-bit version of Wind'ohs for ~$200 seems a waste.Is it now possible to run XP in a "virtual" machine under Debian? More importantly, is it possible to install XP completely from within the virtual machine so it never sees the > 4 Gb or RAM and freaks out? What sort of hardware is required to do something like this? I presume a CPU with certain special capabilities is essential, but wouldn't those special instructions (whatever they are) be pretty standard now? Would the virtual XP install need its own partition?
View 1 Replies
View Related
May 24, 2011
I currently cannot get my printer to work (nothing ever get's printed) even though CUPS seems to be correctly configured and reports all jobs as "completed" without any errors. As I know that my printer works (I can print from my laptop on it) I currenty suspect my new PC's parallel port to maybe have a hardware issue. My question is now is there any way to check the parallel port?
Here are some details:
from dmesg:
lp0: using parport0 (interrupt-driven).
from lsmod:
parport 27954 3 ppdev,lp,parport_pc
In the BIOS the mode is set to EPP. So as far I can see (I am not really an expert) the kernel-modules are there, /dev/lp0 exists and has the proper permissions.
Yet doing 'echo -en "
Hello
f" >/dev/lp0' does not produce any Putout on my printer that is connected via the parallel port.
View 6 Replies
View Related
May 27, 2015
I have Debian installed but I need to dual boot with distribution based on Ubuntu 14.04. This is my first UEFI dual boot install attempt. And I must do it right. I must not lose my Debian !
Code: Select allDisk /dev/sdb: 232,9 GiB, 250059350016 bytes, 488397168 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
[Code] ....
Ubuntu will go to /dev/sdb5 but I don`t no for sure what to do when installing Ubuntu. How to select during install existing UEFI partition(/dev/sdb1) so Debian and Ubuntu can use it. Can I select existing UEFI partition like I would do for /home or /swap ? Will this work ?
And what will happen with Grub if I select install grub ? I want to manage grub from Debian, it is my main OS. Can I skip Grub install and just update grub on my debian after ubuntu install ? Or I just install grub, then after completed Ubuntu install I install it again from Debian. Will this work ?
Is procedure of installing dual boot trivial like before or UEFI hide`s some unpleasant surprise.
View 8 Replies
View Related
Dec 15, 2015
I'll start off with stating my problem and summarize how I got to it.
I installed Windows 10 on an SSD. I installed Debian 8.2 after it. The SSD was/is a GPT disk. I installed both installations from a UEFI booted device (DVD for Windows, and USB drive with Live CD for Debian).
I tested it after each installation making sure I could boot via UEFI into Windows, then Debian, then Windows, to make sure nothing broke.
I rebooted the machine. Suddenly, no more UEFI. Nothing. I didn't change any BIOS/UEFI setup menu settings. Not even my USB drive with Live CD will boot through UEFI anymore. Even when nothing else is plugged into the system.
My situation is actually a bit more complicated than that, but I think that will suffice for now. I can still boot into the Live CD on the USB drive, just in Legacy mode only. I mounted the EFI partition on /mnt/boot after I mounted the file system for Debian on /mnt. It is identical, as far as I can tell, to as it was before when it was working.
My motherboard has CSM and Secure Boot, both have been set up how they need to be to boot UEFI into Debian. Tinkering with them further after things broke did not fix it. I tried all variations of options/settings.
The GRUB Reinstall guide says to be in EFI mode before starting it, so I can't do that.
My motherboard is an ASUS X99 Deluxe, and I've heard ASUS has special "features" (read: bugs) that come with their boards. Searching hasn't brought up any other people with this issue. I believe the firmware is updated to it's most current one.
I've tried dd-ing my backup of my old system, from before trying to migrate to a Dual Boot system, to the SSD (after backing up the dual boot setup with dd -> <name>.img via the Live CD USB). However, that won't boot either as it is a UEFI install as well.
The layout of my EFI partition is as such:
/boot/EFI/Boot/bootx64.efi
/boot/EFI/Microsoft/<Microsoft-naming>.efi
/boot/EFI/debian/grubx64.efi
I've heard that the standards on how that's supposed to be set up isn't a standard. However, since it worked booting into the OS' the first time, I don't see how that could be the issue (a bad hierarchy layout leading to the UEFI not being able to see the OS installs).
I've seen that I can boot to an EFI shell (called Shell.efi, apparently) via an option in my UEFI BIOS setup menu on my motherboard. Is that an option here to somehow bypass this strange issue?
All I can think to try is burn it all and start over. But not knowing what caused it means I could just make it happen again. Plus, I can't boot into UEFI install media, so I can't install UEFI boot OS'. :/
View 5 Replies
View Related
Nov 26, 2010
Initially had windows xp in my system. Picked up on free partition (*it was not a primary partition*) and installed Debian from CD. The installation went fine. Towards end of installation the grub install ran detected windows xp presence and I continued with the install. End of install, prompted that the system would reboot.
However on reboot, I wasnt presented when boot option ( windows xp vs debian) but my windows xp directly got booted. How to get this boot option.
View 1 Replies
View Related
Dec 13, 2010
I've recently bought a new computer and installed Windows 7 on it, but left 100GB of space on a separate partition so I could put Debian next to it in dual boot. I have the new Intel i7 950 processor and I run Windows 7 Proffesional 64 bit, so I assumed I had to pick the ia64 debian image. However the CD I burned from the ia64 image didn't boot. (a black screen started and an underscore kept flashing, but nothing else happened)[URL]
I've managed to install i386 Debian on a older intel pentium 4 computer before and that worked fine. I believe I used another application to burn the CD then. This time I've burned the CD with the default Windows CD burn application. I can try burn more CD's but I don't have much left so I want to make sure this is the problem before attempting again. (the burned files on the ia64 CD look exactly the same as the files on the i386 CD, when browsing through the cd files in windows) "If your PC has a 64-bit AMD or Intel processor, you will most likely need the "amd64" images (though "i386" is also fine), the "ia64" images will not work."This seems a bit strange, they recommend me to use the amd64 image if you have a "64-bit AMD or intel processor". I dunno if this is a typo, but it seems weird to me that the AMD-64 Debian version would also work on my Intel machine
View 11 Replies
View Related
Mar 22, 2015
Im currently not an linux expert so I turn to this forum after several attempts to fix my issue with grub.
I had a dualboot single HD with both win7 and win8.1 when I decided to install debian wheezy from usb.
I deleted the win7 partition and installed debian there. The partition scheme is separate /home
After reboot I automatically get into the "Grub rescue mode" and now I´m stuck.
I tried the commands:
set prefix=(hd0,msdosX)/boot/grub/
Insmod normal
I have msdos1, msdos3, msdos5 and msdos6 but nothing is listing anything from the grub rescue mode.
I get the "UNKNOWN FILE SYSTEM" error and cant get past that.
I also tried booting into rescue mode from usb iso install but nothing happens when choosing to repair GRUB.
The listed devices in rescue mode are:
/dev/sda1
/dev/sda2
/dev/sda3
/dev/sda5
/dev/sda6
debian uses sdb 1-2 and sdb1 is the only option to Reinstall GRUB on but it gives me "Unable to install GRUB in /dev/sdb1 This is a fatal error" message
/dev/sdb1
/dev/sdb2
View 3 Replies
View Related
Jan 28, 2016
I have set up authentication when I am logging from my laptop using windows 7 (putty) into Debian server (see this post [URL].....) but since my laptop is dual boot (Windows 7 and Ubuntu) how would I set up authentication when i am using Ubuntu since from Ubuntu I will be logging into Debian SSH as same user that I am when logging from windows?
View 1 Replies
View Related
Oct 5, 2010
Have a little experience with backtrack 4, which is a Ubuntu distro. I'm changing to Lenny due to hardware limitations on my laptop, an older Dell inspiron 7000.
Here's the specs :
400 MHZ,
120 G HDD parted as C: = 20G (has bad sectors, left blank) and D: = 20G Windows part
128 Mb low density RAM
ATI Rage Mobility ( not sure of video RAM, I think 8 Mb)
Now I liked running BT and liked the linux work, so when the BT install went south I started to look for another linux distro I can run, the BT tools I use are linux after all. Here's where I hit my stump. I decided to go with the Lenny distro, it already has some of the tools I need, but the first time I installed I had the HDD like this 20G, 20G, 20G,20G, 17.??G. I had windows installed on C: (of course, no problems, yet)
After I installed lenny to D: via an iso I downloaded, the Debian GNU/Linux 5.0.6 "Lenny" - Official i386 xfce+lxde-CD Binary-1, BTW first install was from booting from the disk. After reparting, format, etc. of the install, GRUB boot loader detects my D: Windows, great. Reboot to GRUB boot menu, select ddebian, and it loads...cool, until I realize I don't have synaptic, the tools, and apt isn't going to work unless I can load the linux driver from the cdrom...which I can't find.
Reboot...windows, internet for answers I'm thinkin. GRUB loads fine, select windows and get the following error message "Windows can't start because of hardware configuration problems. Could not read from selected boot disk, check boot path and hardware. Check configuration manual for disk configuration."
It took three days to get Windows reinstalled, and a LL format (zerowrite the drive) but during the process I discovered a possible hdw issue...bad sectors on the C: hdd. Solution: C: 20G = unused, D: = Windows xp. Worked great. No more windows issues, so try it again. This time I used the disks installer from windows. Everything started great, boot menuselected debian, install-graphic, but this time I let the part manager create a drive, 20G from the free space an it appropriately made it's swapfile...when lenny booted it was good, but still no synaptic, cd/rom, couldn't browse the computer.
Reboot to windows to get instructions from someone that really knows what's going on...no windows. exactly same message as before. I was able to boot into debian okay, but couldn't find any drives, utilities, wasn't very much, but I needed my windows and the internet to get lessons. I am familiar with the terminal console and KDE. Can use apt for updating, but prefer using the synaptic. Why does my windows keep disappearing? If I can solve the dual boot issue I can learn the system casually. Right now my config is: C: = 20G, nothing here, still haven't run a scandisk either...next on todo list. D: = 20G Windows install...what I'm using now. I'm not going to attempt to reinstall debian until I receive a efinate answer to the dissappearing config, or boot capacity. Oh, yeah, Did try a fdisk/mbr and fix. this didn't bring it back either.
View 11 Replies
View Related
Feb 16, 2015
This is a recollection of my experience using Microsoft Surface Pro 3. I am running Debian Jessie RC1, using the latest linux kernel (as of now, 3.19).
Assume that everything works, except:
- grub2 does not allow to select menu entries without TypeCover/USB Keyboard (Ubuntu had a popup software keyboard in the live CD)
- there is no "right button click" on the touchscreen. Most interfaces use a long press as a right click.
- the touchscreen is sometimes unresponsive, especially when plugging/unplugging the TypeCover;
- cameras don't work (although there is a fix)
- wireless card works 80% of the time only (but the newest marvell firmware from github solves the problem)
- secure boot does not work (need to disable that from the boot menu)
- touchpad gestures don't work (e.g. two fingers scrolling - this is particularly puzzling, as Ubuntu 14.10 live had the touchpad working (including two fingers scrolling) but not the TypeCover)
- touchpad and touchscreen scrolling do not work in certain applications (e.g. in Iceweasel one needs to install an add-on)
- pen works (even when the touchscreen is unresponsive), but only one of three buttons work (with xournal)
View 0 Replies
View Related
Dec 7, 2010
I am going to dual boot debian and my current maverick. Is it possible for debian and ubuntu to share my existing seperate /home partition?
View 9 Replies
View Related
Sep 4, 2010
With Windows 7 pre-installed, what is the procedure for creating a dual boot system with Debian (kde)? The computer has an amd64 processor.
View 11 Replies
View Related
Jul 30, 2010
I had to boot into my Windows 7 install on my laptop for the first time in a few months and I noticed that the Windows clock was 4 hours ahead. Windows sync'd its time with the internet, then I booted back into Debian (Lenny) and my clock was now 4 hours behind. Both OS's are set to the same time zone (EDT). The minutes were correct in both systems. Could the fact that EDT is UTC-0400 be relevant?
View 7 Replies
View Related
Aug 30, 2014
I recently installed Debian 7 on a dual boot with Windows Vista. Thus, when I boot the computer, I am prompted by a GRUB screen to select Windows Vista loader, Debian, and Debian (recovery mode). I would like to upgrade Windows Vista to Windows 7. Will this cause an issue with GRUB? Will a Windows 7 loader be added to the list or will a Windows 7 loader replace the Windows Vista loader? Will there have to be a setting change within Debian? Within Windows?
View 6 Replies
View Related
Dec 23, 2014
My Toshiba Satellite C870-198 has Debian 7.7 installed in UEFI mode alongside Windows 8.1. The GRUB menu no longer displays, but the machine boots straight into Windows.
I can boot into Debian or Windows from rEFInd installed on a USB stick. The rEFInd menu has the following entries:
The Debian entry actually launches the GRUB menu which was installed with Debian.
Code: Select allBoot Microsoft EFI boot (Boot Repair backup) from Basic data partition.
Boot supposed Microsoft EFI boot (probably GRUB) from Basic data partition.
Boot EFIubuntugrubx64.efi from Basic data partition.
Boot EFIdebiangrubx64.efi from Basic data partition.
Boot bootootx64.efi from Basic data partition.
Boot vmlinuz-3.2.0-4-amd64 from boot.
In an attempt to fix GRUB I executed the commands in the 'Reinstalling grub-efi on your hard drive' section of: [URL] ....
Code: Select allmount /dev/sda1 /boot/efi
... surprisingly returned:
Code: Select all$LogFile version 2.0 is not supported. (This driver supports version 1.1 only.)
$LogFile version 2.0 is not supported. (This driver supports version 1.1 only.)
Did not find any restart pages in $LogFile and it was not empty.
The file system wasn't safely closed on Windows. Fixing.
Code: Select all[ -d /sys/firmware/efi ] && echo "EFI boot on HDD" || echo "Legacy boot on HDD"
... returned "EFI boot on HDD".
[Code] ....
... Where is Debian?
FULL HISTORY ....
=============================
The laptop came with Windows 8 preinstalled. I switched off Secure Boot and installed Ubuntu for UEFI dual boot. I recall having to use Boot Repair to get the GRUB boot manager working properly for both systems.
Recently I decided to replace Ubuntu with Debian 7.7 and first cloned the entire hard drive to a USB drive (The Clone Drive). This drive successfully boots into Ubuntu in UEFI mode.
Following this I took the opportunity to update Windows to 8.1, which broke GRUB as expected, so that the machine would only boot straight into Windows.
I installed Debian from a live USB stick in the mistaken belief that it would be bootable in UEFI mode. It did boot OK in legacy mode.
I then burned the full Debian 'DVD' image to a USB stick, booted it in UEFI mode and reinstalled Debian. In UEFI mode GRUB allowed me to boot into both Debian and Windows.
At this point I tested The Clone Drive. It was still able to boot into Ubuntu as previously, but after powering down, unplugging The Clone Drive and rebooting, the GRUB menu failed to appear and the machine booted straight into Windows. This is its current state.
View 13 Replies
View Related
Feb 13, 2015
I'm inexperienced in Debian. I have a dual-boot machine (64-bit, Debian 7.3, Windows 7, legacy boot) and encouter a problem at boot ever since I completed the installation of Debian 7.3 alongside the exising Windows 7. This machine has six hard drives: two are intended for ntfs storage of general data (raided together by RAID1); two more are intended for ext4 storage of general data (also raided together by RAID1); the fifth contains the Windows OS files and the sixth contains the Debian OS files. The problem is that I arrive to the grub_rescue each time at boot, seeing the message:
GRUB loading.
Welcome to GRUB!
error: no such device: e081517b-3399-4067-9294-8f0686f753ca.
Entering rescue mode...
grub_rescue>
View 2 Replies
View Related
Sep 4, 2015
I have a Dell laptop (inspiron 1150) which was dual booting Windows XP and Ubuntu 9.04. I have successfully installed Debian Jessie Standard over the Ubuntu. I pre-partitioned using gparted-live to make a separate single partition for the Debian install. Guided partitioning was then carried out by the installer producing separate /, /home, and swap partitions. After installation, the grub menu shows an entry for Debian and Windows XP. I can boot Debian, but not Windows XP. The symptoms are the same as reported in other forums: A terminal is displayed, vanishes and the system reboots defaulting to the Debian boot.
The grub.cfg file for the Jessie system has an other-os entry:
Code: Select allmenuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" {
  set root=(hostdisk//dev/sda, msdos2)
  search --no-floppy --fs-uuid --set=root cc0ce0ab0ce091ae
  drivemap -s (hd0) ${root}
  chainloader +1
}
The original Windows entry for the Ubuntu install was:
Code: Select allmenuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" {
  insmod ntfs
  set root=(hd0,2)
  search --no-floppy --fs-uuid --set cc0ce0ab0ce091ae
  drivemap -s (hd0) ${root}
  chainloader +1
}
The partitions produced by partman look OK (during the pre-partitioning I did not touch sda1, sda2, or sda3):
Code: Select all~ # fdisk -l
Disk /dev/sda: 37.3 GiB, 40007761920 bytes, 78140160 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code] .....
Partition table entries are not in disk order.
The os-prober found XP:
Code: Select all~ # os-prober
/dev/sda2:Microsoft Windows XP Home Edition:Windows:chain
So it seems that everything is in place, but there are perhaps important differences in the grub.cfg files. Are the two "set root" commands equivalent for example?
View 5 Replies
View Related
Dec 28, 2015
I have Windows 10 and Deb 8 dual boot, and I need to re-install Windows but want to avoid (or at least plan for) losing Grub/Linux boot.
Last time I re-installed Windows after Linux I ended up having to re-install Linux again afterwards as well, because I couldn't recover it (seemingly due to complications from encryption). So this time I'm wanting to plan and avoid that.
CURRENT DISK PARTITIONS:
Code: Select allsda1Â |Â 550MÂ Â |Â EFI System
sda2Â |Â 128MÂ Â |Â Microsoft reserved
sda3Â |Â 175.8G |Â Microsoft basic data
sda4Â |Â 286MÂ Â |Â Linux filesystem (Boot)
sda5Â |Â 28.2GÂ |Â Linux filesystem (Root)
sda6Â |Â 91.3GÂ |Â Linux filesystem (Home)
sda7Â |Â 1.9GÂ Â |Â Linux swap
[Code] ....
As there is a "Microsoft Reserved" partition and a separate Microsoft directory within the EFI partition, if I just go ahead and reinstall Windows will it install it's boot loader/image to one of it's own partitions? And NOT affect anything else like Grub and other Linux things?
Logic tells me yes, but there seems to be many issues on the internet about installing Windows after Linux.
My primary concern is whatever happens with Windows or anything to do with dual loading etc, is that Linux will still just boot, or I can get it working again without much hassle.
Why is there a reserved Microsoft partition AND a Microsoft directory in the EFI partition? Which one boots Windows?
Why is there a separate Linux Boot partition AND a Linux directory in the EFI partition? Which one boots Linux? Where is Grub invoked from, is one redundant, etc?
How these work. It is possible I've set them up wrong, or with redundant partitions, but both systems have been booting ok for months.
View 3 Replies
View Related
