I just upgraded my squeeze to wheezy only to have a bunch of problems. Now I want to downgrade back to squeeze. To upgrade I changed everything in my /etc/apt/sources.list from 'squeeze' to 'wheezy' and ran 'aptitude dist-upgrade'. Is it possible to go back without reinstalling?
View 5 RepliesI need to install PHP 5.2 to run a script which didn't run correctly with PHP 5.3. Thus I would like to install PHP version from "lenny" packages (and not from "squeeze" packages).
I've found the following proceeding: [URL]
but I would like to use Debian packages instead Ubuntu packages.
But when Squeeze goes from 'testing' to 'stable' in December... does Wheezy get promoted from 'sid/unstable' to 'testing' at the same time?.
I started my life in Linux with and currently use Ubuntu, and it runs decent(barely). However, I just upgraded to Ubuntu 10.10, and because of strange little issues and increasing bloatware, I have been forced to strongly consider the "mother OS": Debian.
The reason for my original question is that I want to run whatever the current "testing version" is. And if Wheezy gets promoted at the same time Squeeze does, then I will just wait the 4 weeks instead of slogging through another install(I prefer fresh installations vs upgrading within). I know the test versions of Debian are a bit more active than stable, but I have used Ubuntu for over 2 years, so I have some experience dealing with Terminal commands, package management, gnome, etc...I am also currently VirtualBoxing a copy of Squeeze.
My Squeeze version is extension three and I had it loaded on my Seagate 1 TB SATA drive. Extension three Squeeze is still on the SATA drive. I loaded Wheezy on my 80 GB Western Digital IDE setup up as a master with my Plextor IDE CD/DVD ROM setup as the slave drive.
Squeeze on my version was LXDE and Wheezy on my version is Gnome gdm3. My Squeeze was loaded with Lilo 22.8 and my Wheezy worked with the regular bootloader. I am just wondering if I use Disk Utility to delete the extension three of Squeeze if it will make both versions unusable.
I'm trying to compile the 2.6.38 kernel (from the Wheezy sources) on my Squeeze laptop and get the following error: "dpkg-buildpackage: error: debian/rules build gave error exit status 2" After doing apt-get build-dep linux-image-2.6.38-2-amd64 and apt-get source linux-image-2.6.38-2-amd64 I did dpkg-buildpackeg and here is what happened:
[Code]...
I'm wondering I've read in some places that if people would like to move from a stable branch of Debian to the testing you can usually just replace the lines in sources.list with the testing release and update and then dist-upgrade. Is this true...and if so is it safe?
View 1 Replies View Relatedis it possible to simulate upgrading a Squeeze installation to a Wheezy or Jessie installation, on a OVH server ?I would like simulate upgrading server, and if not problems, upgrading in real time.I don't do that manipulation, and I don't do mistakes on a production server.
View 2 Replies View RelatedI try to update the packages before upgrade to wheezy,looks like when I run apt-get update,it shows error as per below:
W: GPG error: http://fosiki.com stable Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY 379393E0AAEE96F6
rat:~# apt-key adv --keyserver keyserver.fosiki.com --recv-keys 379393E0AAEE96F6
Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --
[code]....
I'm currently running Debian Wheezy (upgrading to Jessie is not possible since I'm using OpenMediaVault which only supports Wheezy) but ever since I installed Deluge BitTorrent client that I've had this python-libtorrent package as "kept back". I'd like to fix this system state but how...
A few things I've tried:
Code: Select all$ sudo apt-get dist-upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
Calculating upgrade... Done
The following packages have been kept back:
python-libtorrent
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
Code: Select all~$ sudo apt-get install python-libtorrent
Reading package lists... Done
Building dependency tree
Reading state information... Done
[Code] .....
I have the following APT repositories on my sources which I believe are causing my problem:
Code: Select alldeb http://dh2k.omv-extras.org/debian/ stoneburner-miller main
deb http://ppa.launchpad.net/deluge-team/ppa/ubuntu precise main
They were added through OpenMediaVault's interface when I enabled some checkboxes to be able to install Deluge.
I upgraded my Lucid Lynx with some PPAs and found some bugs. Now I removed the PPAs and want to downgrade my system according to default repositories. What is the best way to do that?
View 3 Replies View RelatedI upgraded U. 9.04 to 9.1 over the net a few days ago and got stung by the 'Driver' issue. Namely, my nvidia card is not reconciled and as a result, the monitor remains blank. I am assuming that the remainder of the upgrade went o.K. though I can only follow the boot sequence on the monitor during the bios start up.
I have a live disk of U. 9.04 and want to revert back to it, preserving my data. When I put in the disk and am hopefully asked if I want to "Upgrade", will it work in reverse, so to speak. I understand that there is a problem with compatible libraries etc. but will it ignore this and simply replace the new with the old?
Is there a way to do downgrade back to Lucid?
View 2 Replies View Related I could not get the hardware to work with Lenny's ancient drivers, so I gave up and decided to upgrade to Squeeze.Well, the hardware works (except sound), but KDE4 is a such a disaster that I want to run not walk! all the way back to Lenny. I'm stunned that after four years of active development, this desktop still doesn't have something as basic as keyboard shortcuts or the ability to place icons where YOU want them.
The widgets frustrate me to no end. The new K menu is impossible to navigate. I'd rather hang myself than use Dolphin as a file manager. KDE4 gives me more notifications than MS Windows' crapware. And it's UGLY !!! The "Oxygen" theme makes me want to tear my eyeballs out.
My laptop is Toshiba Portege 2000. Every time after I installed new ubuntu release, I have to replace the xorg.conf to fix the resolution problem b/c I got 800 x 600 screen only. However, after the 10.04 installation. I only got 1/2 of the screen of resolution. I cannot even see most of my terminal screen.
View 2 Replies View RelatedI am still running the linux-image-2.6.32-5-686 kernel a computer with squeeze. I installed squeeze on it when it was unstable. I would like to bring up to the new stable state.Should I do apt-get install linux-image-2.6.32-5-686or should Iapt-get dist-upgrade
View 1 Replies View Relatedi have fresh installed debian wheezy xfce4, and using slim to start it but i can't get reboot, shutdown and thunar can't open flash and others volumes. i using .xinitrc (exec ck-launch-session startxfce4)
View 3 Replies View RelatedI am giving Wheezy a whirl and am having with screen blinking ever 30 seconds.
View 5 Replies View RelatedI got "stuck" with stable up to now and want to upgrade to Wheezy. But, although I've done this before, I'm having a dependency problem I wanted to ask about before breaking my system somehow. This is the /etc/apt/sources.list, ready for Wheezy:
[URL]
So, I regularly use aptitude as my package manager. After updating the database with aptitude update, trying aptitude full-upgrade gives me a huge of conflicts.
[code]....
But, if I use apt-get dist-upgrade, I get no conflicts. if I dist-upgrade with apt-get, will that affect my daily usage of aptitude (which I prefer)? I know APT is a single database and apt-get and aptitude are just different interfaces, but I guess differences might rise when marking packages as automatically or manually installed.
Is it possible to run kde in Wheezy without udev? I am asking this because the modesetting failure is manifested as soon as udev tries to populate the /dev directory.
View 6 Replies View RelatedI dont want openjdk packages on my system, in Kubuntu I had a few troubles with them trying to make SqlDeveloper to work around. So this is what I see after a java -version:
Code: Select alledgardo@debian:~$ java -version
java version "1.8.0_45"
Java(TM) SE Runtime Environment (build 1.8.0_45-b14)
Java HotSpot(TM) 64-Bit Server VM (build 25.45-b02, mixed mode)
edgardo@debian:~$
I've been uninstalling openjdk from synaptic and with other few commands on the terminal so far and I think I probably broke it. I have no /usr/lib/jvm folder only /usr/lib/java/jdk1.8.0_45.But everytime I wish to start up Eclipse it shows the logo for a few seconds and that's it.... never gets opened. And in /usr/bin$ I only have this symbolic link....
Code: Select alllrwxrwxrwx 1 root root 22 abr 19 18:57 java -> /etc/alternatives/java
I've tried different tutorials I found surfing the web but none of 'em seem to work.
I've had a weird issue recently with Java/Spring. Basically, it would work on all machines but my trusty Debian box. Macs for devs, Ubuntu for production and some devs have it too. This annoyed me, because of course Debian is the greatest and it must work there too! Also, Java is based on the whole write once run anywhere concept, I have never really had a problem with code behaving differently on different Java installs of the same version, even on completely different OSs it seems to behave itself very well. URL....
I moved up to Jessie and the problem goes away. I can only conclude that some library that is called by Java got upgraded, somehow influences the order in which Spring resolves its dependencies. Probably the fact that other devs build on Ubuntu and have got it working there, and the upgrade to Jessie brings my libs more in line with what Ubuntu will be running has done the trick.
I am trying to install octave 4 in my debian wheezy, and I am getting following error after I have executed ./configure
checking for sgemm_ in -lmkl... (cached) no
checking for sgemm_ in -framework vecLib... no
checking for sgemm_ in -lcxml... (cached) no
checking for sgemm_ in -ldxml... (cached) no
checking for sgemm_ in -lscs... (cached) no
checking for sgemm_ in -lcomplib.sgimath... (cached) no
checking for sgemm_ in -lblas... (cached) no
checking for sgemm_ in -lblas... (cached) no
configure: error: A BLAS library was detected but found incompatible with your Fortran 77 compiler settings.
I have tried to find a solution about issues installing octave 4 from binaries. I can not use octave from the repository as it is old for my studies.
when gnome 2.32 might be ready for Wheezywhen gnome 2.32 might be ready for Wheezy. I'm in hopes that Wheezy will NOT have gnome3, and I'm somewhat confident of that, but I play in both Debian and Ubuntu and I'm thinking about trying to get the Ubuntu devs to port Debian's gnome version 2.32 into their Oneiric Ocelot via package 'gnome-desktop-environment'. (It's currently at 2.30).
View 5 Replies View RelatedJust re-installed Wheezy to ssd-drive and noticed that everything works much faster than before. For the older install I made some changes to /etc/fstab (I think) which I found from the web. I don't remember exactly what changes.
Question is: what's the situatation with Wheezys beta4-release and ssd-drive? Do I have to edit something at the moment, or does the installer notice ssd-drive and make everything needed?
I have upgraded the packages on wheezy and I see lots of errors
Code: Select allaptitude update aptitude upgrade.
I see Code: Select allErrors were encountered while processing:
mysql-server-5.5
ntp
rsyslog
apache2.2-common
apache2-mpm-prefork
apache2
bind9
corosync
[code]...
Still I am not able to install the dependencies.
This is Wheezy x86_64. I tried two different ways to install kernel 2.6.38 on my machine and both have failed. First thing I did was to follow this guide [URL]... el-26.html) and try to compile the latest stable from kernel.org. I don't know why, but it turns into kernel panic when I try to run it. Second thing I did was to install the liquorix 2.6.38, and that also fails, seeming to boot but hanging a second short from the login. I don't know what I'm doing wrong. Is there a special way to install kernels in Debian? This is the first time I tried compiling a kernel, so it's quite likely that the problem is sitting 6 inches from the computer screen. Also, how would I remove those kernels since they're obviously not working? I know I could remove them from the grub menu but I'm not sure how to completely delete them.
View 12 Replies View RelatedI will preface this post by stating I am a beginner in Linux in general. I am trying to add a 4TB hard drive to my LVM set up. I started by partitioning the disk using fdisk. After that I went to add the disk as a physical volume. When I ran pvdisplay I noticed that the disk was only showing as 2 TB.
After some research it appears that anything over 2 TB isn't supported by fdisk. Instead I need to use "parted" or "gdisk" . So I used the following command "sudo gdisk /dev/sda" and recieved this,
Partition table scan:
MBR: MBR only
BSD: not present
APM: not present
GPT: not present
Found invalid GPT and valid MBR; converting MBR to GPT format. THIS OPERATION IS POTENTIALLY DESTRUCTIVE! Exit by typing 'q' if you don't want to convert your MBR partitions to GPT format!
I was about to pull the trigger and enter "w" when I saw the message "THIS WILL OVERWRITE EXISTING PARTITIONS" which scared me away.
So does this message only refer to the previous partition I had created on /dev/sda? Or is it all partitions?
Every time i click 'System Settings', it says that it is Starting, but nothing else happens after that. I can access 'Advanced Settings', but not 'System settings'. A
View 13 Replies View RelatedI upgraded my Wheezy 7.8 to make sure all packages were installed Before taking the next step to upgrade to Jessie.I upgraded to Jessie and it seemed to run OK....but after reboot I had no network Connection..I checked ifconfig and the wrong network card mac address is being assigned to the wrong card....?I have a clonezilla server on my server, so this was my network interfaces before and after upgrade
Code: Select all# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
[code]...
I even checked nano /etc/resolv.conf and sure enough my gateway was the same for my Internet eth0.When I ran ifconfig I could see that the eth0 mac address was set as eth1..I tried to reset my drbl for clonezilla but that only sees the vmware Connection and not my actural cards.. have taken alook at /etc/udev/rules.d/70-persistent-net.rules and the assignment is right but not ifconfig?
With "quiet" removed from the grub linux line, I'm getting the following error messages when the boot hangs up early in the boot process (19.768231 seconds into boot).:
input: HDA NVidia HDMI/DP,pcm=3 as devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input6
input: HDA NVidia HDMI/DP,pcm=7 as devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input7
input: HDA NVidia HDMI/DP,pcm=8 as devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card0/input8
So, is this a NVidia issue or a sound card issue?