this is posable but am trying to do this "Create folder from a filename and move the file into the folder" i have 500000+ file's i need to do with is there a easy way?I really don't want to download them all make/move them with filemonkey just to re-upload them
View 2 RepliesWhen I position icons on the desktop in specific places, then I choose to move a file or folder into another folder, all the icons arrange back to the left side. This happened in an earlier version of KDE 4.x, disappeared the next version, and reappeared. how to keep this from happening. It makes using the desktop a pain in the you know what.
View 2 Replies View RelatedI'm running out of disk space in root, so I decide to move /usr/lib64 directory to other partition by creating moving the whole directory to new location and create a softlink in the old location. What I'm planning to do is:
1. Copy the whole directory to new location
2. Make sure if there's no problem in the copy process
3. Create a softlink in the old location pointing to the new location.
However, when I'm comparing the old location and the new location using du command, there's some discrepancies between those two where the new location contain bigger size than the old one. How is this possible?
Is this the proper way to save disk space by creating a softlink?
I have a folderA that contains folderB that contains a lot of files. I would like to get rid of folderB, but not its contents. I want those contents to be inside of folderA. How can I accomplish this on the commandline?
View 2 Replies View RelatedGparted shows that my dual boot laptop has the following partitions: [URL] I want to create a partition and move the contents of my Home folder into it.
View 3 Replies View RelatedI found a script that runs any commands from a dropbox folder. It seems to take the scripts i have from the remote folder to the output folder to the old folder. but it never seems to actually run the scripts. it just seems to move the scripts from folder to folder Here is the page of what I'm talking about. [URL]
View 6 Replies View RelatedI have this nasty habit of refreshing desktop in a quick succession by right-clicking and selecting 'Refresh',on my XP system at office.(And,iam sure most of us do the same).With Ubuntu,if a right-click on desktop slowly and select 'align by...',it simulates the XP refresh action as explained above.But,if i perform the same action rapidly,it takes this first option from right-click context menu,which is 'Create Folder',and results in an empty folder being created on desktop.I tried double right-clicking and again it created an empty folder.Is there any workaround to handle this.I mean:Can the right-click context menu items be shuffled so that the 'Create Folder' option is moved from 1st place
View 9 Replies View RelatedInitially I thought - use a for loop with ls in it:
Code:
However this causes lots of problems (folders have extensions, I have duplicate folders, the names with spaces create a folder for each element of the name).
The contents of the folder is basically movies (some with subtitles). Some of the names have things like (original) or CD1 CD2 in them.
I am trying to post a driver in ..../cups/model folder but it says"access denied....could not write to ....cups/model.how do i move this driver file to the model folder
View 1 Replies View RelatedI wrote this little script and I need some help, I am trying to achieve following:Every day I receive new file in the /home/denis/MyData/ folder and I don't know what the file mane will be but I want to move any file that arrives there to the new location /media/DataBackup/Linux/backup/ (media/DataBackup/ is external 500GB USB drive)to automatically create new folder with the date and time stamp every day and then to move content of the /home/denis/MyData/ into the new folder with current date stamp. So every day there will be new folder and will contain files for that day only.My script is as follows:
cd /media/DataBackup/Linux/backup/
mkdir MyData_$(date +%Y%b%d_%HH%MM)
#this creates file MyData_current date and time
[code]...
I would like to move a folder to another folder but I just want to merge the two folders.
For example,
say I have Folder B which has the following files in it
- fileA
- fileB
- fileC
Folder A has the following files in it
- fileA
- fileB
- fileC
- fileD
- fileE
And I want to move folder A to folder B.
The objective here is to ensure that existing fileA, fileB and fileC are not replaced but fileD and fileE are to be copied across.
Is there an easier way to do this in linux?
I am running Ubuntu 10.04.
I'm new to ubuntu and want to install stepmania so i downloaded the binary, i want to put the files in the /opt/ directory, the only problem is i cant create a new folder, i tried dragging a ready-made file into it but it just says "you do not have the permissions to file:///opt/" Im soo sad i wanna play my sM NOW!
View 3 Replies View RelatedI am able to view my windows network from my UBUNTU desktop after being prompted for a username and password to the windows network. No problem. But how can I accomplish this from the command prompt?
Here is my windows directory; smb://corpserver/d$/Data
And here is what I am trying to accomplish;
Code:
mv /var/lib/mysql/RSecuredData.csv smb://corpserver/d$/Data/Common/Secured%20R%20Reports/$(date +%Y%m%d)_RSecuredData.csv
Basically taking a csv file and moving it from mysql directory on my Ubuntu machine to a network folder on my windows server. (Windows Server 2003)
When I try that command from the command prompt I recieve;
Code:
mv: cannot move `/var/lib/mysql/RepoSecuredData.csv' to `smb://corpserver/d$/Data/Common/Secured%20Repo%20Reports/20100323_RepoSecuredData.csv': No such file or directory
Many years ago, I converted a portion of my files to an arbitrary format with a specific extension. i no longer desire to have them in this format and i would like begin the process of replacing them because conversion is not an appropriate solution. unfortunately, they are mixed in separate folders of the same root folder with files in my current format of a different extension. I feel it would make this process easier if I were to move every folder that contained a file with the undesired format to a separate root folder. The files are stored on a Linux server and shared via samba. How can I do this with a couple of commands or a script? I am open to other suggestions as well. I want to avoid time spent editing text files. Ultimately, I'd like a command that produced a list of full paths for folders, sorted by the number of levels would be a nice touch. A list of all of the files is clearly not what I'm looking for.
View 2 Replies View Related1. I need guide on how to create a folder name from the text file with .txt format.
2. First, I call the function of reading the directory.
3. Then, I dont know how to do.
4. Finally, I close the directory
This is my source code in perl
## read text.txt file ##
open F, "from/$directory/text.txt";
read F, $buf, 9999;
close F;[/size]
This source code is used to print the folder with date format like "ddmm" d stands for day and m stands for month
if ($command =~ s/-O "(.*)"/-O "$websites/$month/$file"/)
Instead, I want to have the name from text.txt to be folder name
I'm installing a tool on Linux system.For this installation, i didn't have the installation document. I got to know that have to create configure file from the bin folder
View 1 Replies View RelatedAfter upgrading to 11.04, I noticed something strange, being that when I want to drag a file or folder from one Nautilus folder window to another which is not visible, I can no longer hold the item over said folder's taskbar button and wait for it to appear. It just shows the + for copy, and when I let go (which I have no choice but to eventually do), it creates a launcher to that item (I assume it's doing that, and not actually copying there, but the + has me unsure).
I've looked in Nautilus's preferences to see if this is some new behaviour that I can revert back to, but could find nothing there.
I'm of course using the Classic desktop with bottom panel being the taskbar. If you know how I can rectify this, please let me know, as the times I would want to create a file or folder launcher without the usual hassle would be rare, but I am constantly dragging stuff from one folder to another, and it would be a real pain to have to line up source and destination folders each time.
i am trying to install a driver for my belkin wireless usb adapter but when i type make it says cannot find lib/modules/<debian version>/build so it does not configure the sources.
View 1 Replies View RelatedI have a php script that I want to create a file and allow it to be downloaded. I know the dangers of chmodding a directory to 777 so I am trying to avoid this.
What I have done is logged in through ssl as root.
Navigated to the directory where the directory I want to chown is located. I then perform:
chown -R apache directory
When i want copy a file or folder in some system folder like sbin,Etc.show me error about privilage but when I'm in console i use su command for become admin and i can copy my file or folder.in other operation system like windows user can copy anything,i want know for direct copy my folder in linux without console what should i do? i must join my user name in root group?
View 4 Replies View RelatedI have just begun using Debian Kwheezy and I'm also a newbie to Linux. My question is, how do I create or transfer folder icons to the desktop? Kwheezy's way isn't the same as most distros I've used.
View 6 Replies View RelatedI been using linux for a while, but I havent had the time to really learn it. Something Id like to get more familiar with is bash so here is a simple example of something I would like to do:
I have a directory full of files. For each file in the directory create a new subdirectory with each files name.
I tried this:
#im already in this directory
aaa=./*
for a in $aaa
do mkdir $a
done
One of the problems is that there are spaces () and - in the filenames so I get many subfolders with names like "-" which i don't want.
I tried stuff like:
aaa=./*
for a in $aaa
do mkdir "'"$a"'"
done
This of course also did not work.
Additional I tried just creating a folder with the name of one of the files and I got this:
mkdir: cannot create directory `(audio) - R56339.EXE': File exists
Well yeah a file exsists with that name, but I want to create a folder- why is there a conflict?
Just to be clear here are the contents of this folder:
~/Desktop/LAB/Media/Drivers - (Image Deployment)/Optiplex_GX260/XP> ls
(audio) - R56339.EXE (NIC-Onboard-Intel) - R54402.EXE
(Modem-datafax-V92) - R54403.EXE OEM_Applications
[Code].....
Is possible to make a folder permission like below?
-User can create files/folders in the shared folder.
-But the files/folders they created, cannot be delete/change by em.
(only can be delete by root users)
-Each new files/folders created will auto owner to root only.
I'm starting bash shell script and I'm looping without any solution.
I'm trying to find some files under a folder hierarchy and in case of errors moving these files to a destination folder under the same hierarchy recreating this hierarchy if not exists.
Finding all ._* files under /src and moving them to /dest recreating folder1 or the others which contains ._* files but without moving files which does not correspond to the pattern.
Code:
I tried find command and I'am getting all needed files
Code:
But I don't know how to use the output to get the parent folder of files which are found to
1- create folder with mkdir -p /dest/folder1 or /dest/folder1/folder4
2- move found files from /src/... to /dest/... with rm command
I'm working on a find command as this trying to do all in the same line but ... little lost
Code:
i'm trying to make a folder on fat32 partition named NEW by typing in console mkdir NEW, then i open PCMan file manager then go to that folder at first the folder name was NEW but after i doubleclick it and go back the folder name was changed to 'new'then i tried to rename it to NEW but it says file exist then i tried to rename it to 'not new' (this time inside PCMan) and it work then i rename it again to NEW, go into that folder and go back again... the folder name changed to 'new' again.anyone know why this happen?? this doesn't happen if i make the folder name more than one word such as 'NEW NEW'
View 2 Replies View RelatedI have an exe-File called 'pas'.The file run wihtout problem when I call it from the same folder . For example:
$ ./pas
But when I call it from another folder, it does not run. For example:
$ software/pas
How to move folder which have same name in subfolder Path : /root/Documents/untitled_folder/untitled_folder/abc.txt I want to move files from that folder how to do that
Output : /root/Documents/untitled_folder/abc.txt through terminal any idea ? and plz suggest a way to do in all folder present in directory recursevely how to check recursively in all folder's present in directory
./folder1/abc.txt
./folder1/folder1/abc.txt
./folder2/folder2/folder2/bbc.txt
./folder3/folder3/folder3/folder3/my.txt
./folder4/folder4/folder4/folder4/folder4/bcz.txt
./folder5/folder5/ca.txt
[Code]...
Anyways, I recently got into the whole HTPC scene, and picked up an Acer Revo for my self, with a media center OS (XBMC) that was apparently modded from Ubuntu. Keep in mind that I can only use the terminal for any of this, as the GUI is just for video settings, etc.
So, XBMC just totally crashed on me, and the GUI stopped working. The files were still there, I just couldn't watch them. After many hours of tinkering, I decided to just reinstall XBMC, but make two partitions, and then move my movies and stuff to the new, working partition, and afterwards, delete the old, non working one.
I just don't know how to move from one partition to another.
So, can someone explain, in absolute layman terms, how to move my "Movies" folder from my first partition, to the New one?
In my bash script I need to move files in a folder if it is not in use.
Code:
for entry in `ls /root/shared_storage/input`; do
echo $entry
run=`lsof /root/shared_storage/input/$entry`
ru=${run:0:5}
echo $entry
if [ "$ru" == "" ]; then
........
It worked fine sometimes but sometimes it just get stuck at lsof. Is there any other way that I can use here to check if the $entry is using some other process?
I'm trying to run a "Garry's Mod" game server on my dedicated server. I'm using a very helpful tutorial on the Gmod wiki (I cannot post a link to it as I don't have 15 posts or more ).
Now I have very, very little experience with Linux (I am running Debian on it). However, I've gotten quite far in the tutorial, and everything looks to be perfect. I am using putty to access my server, but I also have FTP on it.
Basically, when I need to access a certain folder called "orangebox" (using cd orangebox), an error comes up saying this:-bash: cd: orangebox: No such file or directory.
However, I know that there is such a folder, as I can see it fine on FTP.