OS: Debian 8.1
Php: 5.6.10
Apache: 2.4.12
My question is I trying to install php5 and add mcrypt,, but it is unable to run "aclocal" command. It show this message.
I have check with the path of /etc/profile, I'm sure that I have added the path as below. Beside that, before "aclocal" command I able to run another command which is "phpize". It is able to run successfully, after I added the path as below...
I've recently been trying to restore a Debian installation back to it's previous state after a serious operation system crash. Efforts are largely going well however I've run into problems since reinstalling Wine. Previously I could execute a Windows executable by simply entering ./executable.exe in the bash shell but this no longer seems to work as now I have to include the "wine" command in front of the executable. how to configure Debian to automatically use Wine to execute using the ./executable.exe format?
View 1 Replies View RelatedI have been having trouble setting up a daily backup script with cron. It would basically never worked. Searched the net for answers but didn't find anything. I finally figured it out !! When root crontab is edited the execute flag is removed from #/var/spool/cron/crontabs/root. I change it with #chmod a+x /var/spool/cron/crontabs/root and all is good.
View 5 Replies View RelatedI'm not so expert using Debian (3.2.68), especially when it comes to install stuff... I tried to execute for the first time a *.sh 451mb file, but it displayed that:
Code: Select allroot@Poulpe:/home/ambroise# sh gog_hatoful_boyfriend_2.0.0.2.sh
Verifying archive integrity... All good.
Uncompressing Hatoful Boyfriend (GOG.com) 100%
Collecting info for this system...
Operating system: linyx
CPU Arch: x86_64
trying mojosetup in bin/linux/x86_64
USING
PANIC
  Initial setup failed. Cannot continue.
Error: Couldn't run mojosetup
It seems that mojosetup is an open software included for all recent GOG games, but maybe it can't run on Debian ? Or could it be more a directory issue ?
Although I am new to Fedora/Linux I hope to contribute to the community once I'm on my feet with the OS.I am trying to update the graphics driver (Intel), so I downloaded the file, realized I needed to update libdrm, downloaded that, too, and am now on the step of installing libdrm 2.4.23.I am at the step of typing 'make install' on the command line, and get this error message:libtool: Version mismatch eror. This is libtool 2.2.6b Debian Debian-2.2.6b-2, but the definition of this LT_INIT comes from libtool 2.2.10. You should recreate aclocal.m4 with macros from libtool 2.2.6b Debian-2.2.6b-2 and run autoconf again.It appears that I have a newer version of libtools than is needed. How do I recreate aclocal.m4 with macros from an older libtool version, specifically 2.2.6b Debian-2.2.6b-2? Or is the problem with LT_INIT?
View 1 Replies View RelatedI just installed debian and I love it so far. I'm trying to mount an ssd that I took from my previous window installation but it gives me this error:
Error mounting /dev/sdb1 at /media/meknoy/Fotoschijf: Command-line `mount -t "ntfs" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,dmask=0077,fmask=0177" "/dev/sdb1" "/media/meknoy/Fotoschijf"' exited with non-zero exit status 14: The disk contains an unclean file system (0, 0).
Metadata kept in Windows cache, refused to mount.
Failed to mount '/dev/sdb1': Bewerking niet toegestaan
The NTFS partition is in an unsafe state. Please resume and shutdown Windows fully (no hibernation or fast restarting), or mount the volume read-only with the 'ro' mount option.
How can I sort this out? The data on the disk is important and I can not lose it.
Then my SD card with photos on it has about the same problem.
It gives me this message:
Error mounting /dev/sde1 at /media/meknoy/NIKON D7100: Command-line `mount -t "exfat" -o "uhelper=udisks2,nodev,nosuid,uid=1000,gid=1000,iocharset=utf8,namecase=0,errors=remount-ro,umask=0077" "/dev/sde1" "/media/meknoy/NIKON D7100"' exited with non-zero exit status 32: mount: unknown filesystem type 'exfat'
I use Debian Jessie 8.2 and I am using a 3G connection using this modem => [URL] ....
The 3G connection works fine, except after 24 hours the connection drops and I cannot reconnect. If I reboot the computer, the connection will work again.
My guess is that my ISP gives me a new IP address after 24 hours and somehow my system cannot handle it.
How can I reconnect my 3G connection without rebooting?
I have already tried the following commands:
Code: Select allsudo service network-manager restart
Code: Select alldhclient -r eth0
dhclient eth0
Code: Select allsystemctl restart ModemManager
Results of journalctl and grepping my connection name (SFR)
Code: Select allsept. 22 17:58:19 ark1 NetworkManager[512]: <info> Policy set 'SFR Web / Prepaid 1' (eth0) as default for IPv4 routing and DNS.
sept. 23 18:17:07 ark1 NetworkManager[9446]: <info> new connection /etc/NetworkManager/system-connections/SFR Web * Prepaid 1
sept. 23 18:17:08 ark1 NetworkManager[9446]: <info> Auto-activating connection 'SFR Web / Prepaid 1'.
[Code] ....
As you can see sept 22 at time 17:58 is when the computer started up. And roughly 24 hours after it failed to reconnect.
Also I should mention that there is a script to run the command:
Code: Select allsudo service network-manager restart
if the computer cannot ping a server, ie if the connection is lost.
More journalctl info when the system tries to reconnect:
Code: Select allsept. 23 23:52:53 ark1 NetworkManager[9446]: <info> Auto-activating connection 'SFR'.
sept. 23 23:52:53 ark1 NetworkManager[9446]: <info> Activation (ttyUSB0) starting connection 'SFR'
sept. 23 23:52:53 ark1 NetworkManager[9446]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled...
sept. 23 23:52:53 ark1 NetworkManager[9446]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started...
[Code] ....
When in Thundar (on XFCE - Debian 8.2) and I click the "Network" icon in the left sidebar the following message is displayed.
Failed to open "/ on". Specified location is not supported.
Cant install libfltk1.3.
apt-get install libfltk1.3
root@debian:/# apt-get install libfltk1.3
Reading package lists... Done
Building dependency tree
Reading state information... Done
[code]....
The following packages have unmet dependencies:
libc6-dev : Breaks: gcc-4.4 (< 4.4.6-4) but 4.4.5-8 is to be installed
E: Broken packages
root@debian:/#
I Have debian squeeze but i have install same programs from wheazy and sid reposity.i try to install fltk 1.3 from wheazy, sid and experimental reposity but none of the work.i want to try a program that use the fltk1.3 (dillo3) and cant becouse i cant install fltk 1.3!
I try to compile the fltk but this dosent work, the last text in the terminal was:
configure: error: Configure could not find required X11 libraries
./configure: line 11558: exit: aborting.: numeric argument required
./configure: line 11558: exit: aborting.: numeric argument required
make: *** [makeinclude] Error 255
How i cant install fltk-1.3.0
I've been having a problem with Bluetooth on Debian 8 Jessie i just can't connect to any bluetooth device, i have only tested my smartphone and my bluetooth headphones, i am using blueman manager.After attempting to connect to my bluetooth headphones/smartphone it just disconnects and says "Connection Failed: No such file or directory",i don't know if i have to create a config file or something, the error message doesn't say anything but the error previously mentioned.
View 7 Replies View RelatedI have three monitors, two Dells and an older LG all native at 1920x1080@60Hz and only recently installed Debian on this setup.
The LG is detected as running at 59.93Hz instead of 60Hz and this discrepancy appears to drive up the temperatures in my GPU constantly, even on idle, and introduces severe stuttering in any kind of graphical application.
I had the exact same issue with Windows 7 as well, but was able to fix it by changing the display settings of said monitor to 60Hz refresh, thereby returning the idle temps to normal and removing the stuttering.
My problem now is that I can't seem to change the refresh rate of this screen at all under debian.
xrandr -q returns that the monitor is running at 59.93Hz, but also shows 60Hz as available.
xrandr --output DVI-I-1 --rate 60
appears to have absolutely no effect, it doesn't error but it also doesn't change the refresh rate.
Trying to add a new mode with 60hz and modeline obtained from cvt results in the following:
Code: Select allxrandr --newmode "1920x1080_60.00" 173.00 1920 2048 2248 2576 1080 1083 1088 1120 -hsync +vsync
xrandr --addmode DVI-I-1 "1920x1080_60.00"X Error of failed request:Â BadMatch (invalid parameter attributes)
Major opcode of failed request:Â 140 (RANDR)
Minor opcode of failed request:Â 18 (RRAddOutputMode)
Serial number of failed request:Â 41
Current serial number in output stream:Â 42
I've also tried to set the refresh rate through the proprietary nvidia driver and manually through xorg.conf, both to no effect;
Here's my current xorg.conf:
Code: Select allSection "ServerLayout"
  Identifier   "Layout0"
  Screen   0 "Screen0" 0 0
  InputDevice  "Keyboard0" "CoreKeyboard"
  InputDevice  "Mouse0" "CorePointer"
  Option     "Xinerama" "0"
EndSection
[Code] ....
The driver settings will show 60Hz but the listing for the monitor in the driver and xrandr will still show 59.93Hz. Saving the settings of nvidia-settings to .nvidia-settings-rc was equally fruitless.
The settings on the monitor itself also show it running at 60Hz, without an option to go down to 59.93Hz so I got no clue where that is even coming from.
What else to try, besides buying a new monitor, which I'm not quite prepared to do yet.
Recently upgraded my PC and my WiFi Hotspot connection is refusing to connect. Running a dmesg returns this
Code: Select all[66529.184299] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[66530.762594] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
And the IPv6 configuration in the Hotspot is Ignore
I am trying to upgrade a Debian 4 server to v5 with the instructions from document.However, I am having trouble with getting an installed package upgraded to the latest version for the current release (see error below). And I am afraid to upgrade the distribution if I can't get this package to upgrade. One thing I did notice in the error was, "Aborting downgrade from (at least) 5.1 to 5.0". The dpkg --get-selections command showed that both MySQL 5.0 and 5.1 were installed (I don't know how or why, as I was not the one to setup this server), but 5.0 was the one running. So I've since uninstalled v5.1 but that error still shows up when I try to do an apt-install upgrade. I don't know that this is what is causing the package upgrade to fail but I thought it worth mentioning.
View 7 Replies View RelatedI have just set up the above OS, however, installation did not find my network and therefore APT additional software & security updates could not be accessed.The network was simple to setup post installation.I have uncommented a few sources in the sources list file but obviously that does not,in itself, suffice to get accessability. I am also unable to configure my supported HP printer and I assume that can only be done with an additional package via APT.
View 6 Replies View RelatedThis is embarrassing. I can't get a wireless address from my router with dhclient. The distribution is sid/lxde/liquorix kernel with no network manager on /dev/sdb1.
root@sid:/home/jheaton5# dhclient -4 -v wlan0
Internet Systems Consortium DHCP Client 4.1.1-P1
Copyright 2004-2010 Internet Systems Consortium.
[code]....
I'm trying to get my Intel HM55 GMA HD graphics card to work in Debian Lenny.As the vanilla Xorg didn't have any support for it, I manually compiled the last stable Xorg source (1.7.1 - such a pain) and the Intel driver. But when I try to launch X, I get the following message :
(EE) GARTInit: Unable to open /dev/agpgart (No such file or directory)
(EE) intel(0) : /dev/agpgart is either not available, or no memory is available for allocation. Please enable agpgart.
I have a problem defining persistent device naming on a Debian Lenny server.I have:RAID1 controller on the server machine with two SCSI disks.external storage with RAID5. I have / mount on the first partition on the server SCSI disk and /storage mount on the external storage.
I'm experiencing a problem: The system recognizes the system disk (RAID 1), as sda or sdb - randomly.I want: To control the recognition, and tell the system that sda (sda1) will always be the system disk.The motivation: GRUB is configured to work with sda, and when the system disk doesn't, boot process fails, and I end up in the initramfs shell-like interface.
Booting the kernel
.
.
.
mount:mounting /dev on /root/dev failed: No such file or directory
mount:mounting /sys on /root/sys failed: No such file or directory
[code]....
While I've been using Debian for various years, I have never actually used Stable. No Stable means no Backports, and I have a doubt about the latter. After reading Backports's documentation and the APT Preferences's manual page, I understand that, as of Squeeze, a backport must be installed manually, and that already installed backports are automatically updated. Also, because Backports archives have a pin-priority of 1, one cannot update all installed packages to the versions available in Backports.
I guess that one could achieve it by giving the Backports archive a pin-priority of 991. However, using the whole Backports repository is discouraged everywhere, and I don't really know why. How serious are these warnings? Does it cause a dependency Hell or is it just a warning for novice users?
I am using Empathy IM client to access to gadu gadu and to message with my friends. The strange thing that is happening is that I keep on being connected and then disconnected and then connected again even if I am continuously connected to my internet connection (no problem when surfing or using skype for example)It also seems to come only from me because when my girlfriend is using the same gadu gadu on her windows laptop simultaneously, she doesn´t get disconnected (whether when she is at home and using the same connection as I am or when she is outside, meaning that it doesn´t seem to come from the whole gadu gadu network)maybe it has something to do with the ports that gadu gadu is using but it is strange that sometimes it is working for a period of time and then not and then again.
View 1 Replies View RelatedI have some problems to start my dovecot server on Debian 6.0.1 I tried to install it from webmin using "un-used modules" but it was allways the same error: "E: Unable to locate package dovecot-pop3d".
When I tried to install it from console using the commands: apt-get install dovecot-imapd dovecot-pop3d dovecot-common - and there are no problems with dovecot-imapd and dovecot-common, but still the same error with dovecot-pop3d: "E: Unable to locate package dovecot-pop3d".
I did apt-get update ant apt-get upgrade but I'm receiving still the same error when I want to install pop3d.
It's interesting because there were no problems to install and run dovecot server on earlier versions of debian.
Recently tried to make RAID1 on MBR partitions scheme on Debian Jessie - debian-8.1.0-amd64-DVD-1. The issue - I have unable to boot from second drive after grub-install /dev/sdb by any ways. RAID1 itself for / swap and home is fully functional. Decided to try the same thing on GPT, same story. How to boot from second drive on most recent Debian Branches?
View 9 Replies View RelatedI have installed kmilo, modprobed nvram and added line: KERNEL=="nvram", MODE="0666", GROUP="nvram" to 91-permissions.rules. I used command addgroup nvram and add me ( user tomasso ) to nvram group. Kmilo works fine but I am not able to change brightness of my laptop in kpowersave or by using fn key on my laptop keyboard. I am in powerdev group too.
View 2 Replies View RelatedHave my proxy running on Lenny and tried to upgrade to squeeze. Originally the system was installed on Etch and upgrading to Lenny was no problem. In the system i have two RAID1 volumes, md0 for / and md1 for /home. For upgrading i added the sources to my apt.conf and startet dist-upgrade. During the installation procedure, when installing udev I was advised to install the new kernel first and continue upgrade after booting the kernel. so I installed the kernel by "apt-get install linux-image-2.6-686. When generating initramfs there was a message, that there are no arrays defined in /etc/mdadm/mdadm.conf I took a look and there were none. mdadm seems to have been update before.
I then added the lines for RAID definition and added the data for UUID The UUID I got from the output of "mdadm --detail /dev/md0"
What I don't understand: blkid gives the same UUIDs for the first partitions of the RAID and a different UUID for /dev/md0 and /dev/md1 than mdadm --detail The update of initramfs for kernel 2.6.32 then gives this result:
update-initramfs -u -k 2.6.32-3-686
update-initramfs: Generating /boot/initrd.img-2.6.32-3-686
W: Possible missing firmware /lib/firmware/e100/d102e_ucode.bin for module e100
W: Possible missing firmware /lib/firmware/e100/d101s_ucode.bin for module e100
[code].....
I am trying to upgrade the version of dovecot on a rarely-maintained Debian machine with which I almost never have problems (ain't Linux wonderful?). The current version is 1.0.rc15-2, and I think the latest version is 1.2 something, but the point is that I want to be able to use the pigeonhole sieve plugin. Anyway, when I try to "apt-get install dovecot-imapd dovecot-pop3d", it gets to this: Err [URL].. etch/main gnomemeeting 2.0.3-6 404 Not Found Failed to fetch [URL]..-6_all.deb 404 Not Found E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
View 5 Replies View Relatedi have the basic knowledge of networking. a week ago i installed debian Lenny version on an old pentium 3. in addition i installed a ddclient configured it according to many tutorials.i searched google a few days but didnt find my case. i ran the folowing command :
ddclient -daemon=0 -debug -verbose -noquiet
output:
debian:~# ddclient -daemon=0 -debug -verbose -noquiet
=== opt ====
opt{cache} : <undefined>
[Code]...
i installed ddclient before installing apache. the 10.0.0.10 address is the server address in my d link router behind NAT.
I upgraded a Guruplug Display machine running Lenny to Squeeze. It's running Linux on a MicroSD device, running an ARM-cpu.
# uname -a
Linux gplugD 2.6.29 #1 Wed Feb 16 17:59:04 IST 2011 armv5tejl GNU/Linux
yeri@gplugD ~ $ cat /etc/debian_version
6.0.1
However, after rebooting, every non root user was unable to access anything related to the net.This means, DHCP failed to auto start, ntp is giving errors, etc
# ntpq -p
localhost: timed out, nothing received
***Request timed out
daemon.log:
Mar 27 06:07:44 localhost ntpd[1478]: ./../lib/isc/unix/ifiter_ioctl.c:348: unexpected error:
Mar 27 06:07:44 localhost ntpd[1478]: making interface scan socket: Permission denied
Mar 27 06:07:44 localhost ntpd[1478]: Too many errors. Shutting up.
As root:
gplugD ~ # ping 85.12.6.171 -c 1
PING 85.12.6.171 (85.12.6.171) 56(84) bytes of data.
64 bytes from 85.12.6.171: icmp_req=1 ttl=58 time=42.1 ms
[code]....
I am running Debian 7.0 Wheezy amd64...I installed Debian's nvidia driver earlier but I was having a few issues with OpenGL. So I removed those drivers using "apt-get remove nvidia*" and installed proprietry NVIDIA's driver from their website.Now the issue is, my apt-get/synaptic does not work anymore because it is trying to remove xserver-xorg-video-nvidia and failing to do so.
Code: Select allThe following packages will be REMOVED:
xserver-xorg-video-nvidia
0 upgraded, 0 newly installed, 1 to remove and 4 not upgraded.1 not fully installed or removed.After this operation, 17.8 MB disk space will be freed.Do you want to continue [Y/n]? Y
(Reading database ... 194280 files and directories currently installed.)Removing xserver-xorg-video-nvidia dpkg: error processing xserver-xorg-video-nvidia (--remove):Â subprocess installed post-removal script returned error exit status 128.Errors were encountered while processing: Â xserver-xorg-video-nvidia.E: Sub-process /usr/bin/dpkg returned an error code (1)I have tried apt-get install -f to no avail.
I,ve upgraded Debian Testing to Gnome 3.18, acrivate from Online Accounts file integration of Google service.
In Nautilus left panel i see my Google Drive accounts but is impossible to mount , i have a generic error (impossible to mount position).
How i can fix this?
Same problem on Arch (Laptop).
I'm trying to configure auditd to monitor "strange" events with apache2 weberver on Wheezy (though same problem occurs on Jessie), tried both with "vanilla" 3.2 and backports 3.16 kernel I am actually using.
Here's auditd rules I have problem with:
Code: Select all-a exit,never -F arch=b64 -S stat -F path=/var/www/server-status -k web
-a exit,always -F arch=b64 -S stat -F uid=www-data -F success=0 -k web
So to recap, I want to log stat syscall failures for www-data user, but excluding some "known" issues, such as that "/var/www/server-status" (after a2enmod status, /server-status path can be accessed for statistics, though apache2 still tries to find physical file for that path and fails).
But the problem is.. excluding does not work.
Here's "auditctl -l" output:
Code: Select all# auditctl -l
LIST_RULES: exit,never arch=3221225534 (0xc000003e) watch=/var/www/server-status key=web syscall=stat
LIST_RULES: exit,always arch=3221225534 (0xc000003e) uid=33 (0x21) success=0 key=web syscall=stat
But when I execute:
Code: Select all# wget -O - http://localhost/server-status
audit.log appears:
Code: Select alltype=SYSCALL msg=audit(1461591557.077:365): arch=c000003e syscall=4 success=no exit=-2 a0=7f1bedab9358 a1=7ffef316ac20 a2=7ffef316ac20 a3=7f1bedab91f8 items=1 ppid=2398 pid=2451 auid=4294967295 uid=33 gid=33 euid=33 suid=33 fsuid=33 egid=33 sgid=33 fsgid=33 tty=(none) ses=4294967295 comm="apache2" exe="/usr/lib/apache2/mpm-prefork/apache2" key="web"
type=CWD msg=audit(1461591557.077:365):Â cwd="/"
type=PATH msg=audit(1461591557.077:365): item=0 name="/var/www/server-status" nametype=UNKNOWN
type=UNKNOWN[1327] msg=audit(1461591557.077:365): proctitle=2F7573722F7362696E2F61706163686532002D6B007374617274
So, syscall=4 (stat) is still captured. Looks like "path" is known for auditd, but not excluded.
I've tried various rule combinations, for example simpler, more generic one:
Code: Select all-a exit,never -F path=/var/www/server-status
But it's the same.
Sadly man audit.rules and man auditctl does not have "exit,never" examples, only some (sometimes also similarly unsuccessfull) google results.
Could it be that Debian kernel does not support some audit features?
I have got a laptop running Debian squeeze. I wish to share the wireless connection of the laptop (wlan0) to the ethernet port of the laptop, so that I can share the wireless connection to my desktop PC which is connected to the ethernet port.
[My desktop PC]---Ethernet---[My laptop]---))) WiFi )))---[Public network/ ISP]
I have read the article on Ubuntu community: [url]
I followed the steps, and the /etc/network/interfaces file on my laptop is:
Now the situation is: My laptop can connect to Internet (i.e. ping debian.org from laptop is fine), my desktop PC can connect to my laptop (i.e. ping 192.168.1.1 from desktop PC is fine). However, the desktop PC cannot reach the Internet.
I also read the information on Debian Wiki: [url]
It seems I must install and configure ebtables before sharing my wireless connection to ethernet port. Is it true? (But why the article on Ubuntu community doesn't mention it?) Or I just made some mistakes?