Debian Configuration :: Network Fails On DHCPNAK?

Jun 20, 2011

My debian machine works fine other that it loses network after a few (12 or so) hours. The dhclient manages to renew the DHCP lease the first time, after a few hours, but later when it tries again the modem gives a DHCPNAK. If I understood correctly, this should make the dhclient to fetch a new ip address but it does nothing. I am no expert so I don't know if the cause is the modem box or the debian. There are other (windows) machines connected to the modem box which work fine. The machines are behind NAT.

The debian machine does not currently have a display or a graphics card so it's difficult to start messing with the settings. I've considered having a static ip but I don't understand why the dynamic address doesn't work. What is weird is that it worked fine for several weeks and suddenly started failing. I was running a minecraft server (hehe) with an uptime of several weeks. At first I though it was a hardware issue because I thought the whole computer froze but instead it just drops the connection and I can no longer reach it with SSH or anything.My timezone is UTC+3, /etc/default/rcS has UTC=yes, I believe it is the reason why the lease and the logs differ by three hours.The machine is only running apache2+mysql+php5, GDM is stopped.I'm trying to post as much info I can.Here is the ifconfig output when the connection is working for the wired connection:

eth0 Link encap:Ethernet HWaddr 00:25:22:2b:28:f6
inet addr:10.0.0.7 Bcast:10.0.0.255 Mask:255.255.255.0
inet6 addr: fe80::225:22ff:fe2b:28f6/64 Scope:Link

[code]....

View 3 Replies


ADVERTISEMENT

Debian Installation :: Testing Install: Network Configuration Fails?

Sep 14, 2010

I'm trying to install Debian-testing to an ASUS 1018P netbook on which I have successfully installed Arch in the past. I'm installing from an external DVD drive and when I get to the point of network configuration it fails. I'm connected via Ethernet via eth0 which is recognized. Here is the last part of the ouput:

kernel: [ 1807.932848] atl1c 0000:01:00.0: irq 29 for MSI/MSI-X
kernel: [ 1807.933453] ADDRCONF(NETDEV_UP): eth0: link is not ready
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 8
dhclient: DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval is 15
code....

View 14 Replies View Related

Debian Configuration :: Systemd Fails To Raise Up Network Interface

Mar 15, 2016

Is this a problem of systemd or network-manager however when I started to see this alert I noticed the nm-applet doesn't start automatically anymore.

Code: Select allsystemctl status network
networking.service       network-online.target    network.target
network-manager.service  network-pre.target       
zagor@Debian-635:~$ systemctl status networking.service
● networking.service - Raise network interfaces
   Loaded: loaded (/lib/systemd/system/networking.service; enabled; vendor prese

[Code] ....

View 5 Replies View Related

Ubuntu Installation :: Mini.iso Network - Auto Configuration Always Fails

Jul 12, 2010

I've got this old IBM thinkpad which has 128mb of ram, and I'm trying to configure a small mini.iso minimized ubuntu distro set up on it. From here: [URL] During the instillation, it requires that I connect to the internet to install and choose packages, the problem is the auto configuration always fails. I plugged in via Ethernet, but I'm still not exactly sure how to get it working.

View 4 Replies View Related

Debian Installation :: 7.4 - WiFi Configuration Fails

Apr 8, 2014

I've been installing multiple versions of ubunutu over years and now I better understand why I faced always problems with wifi configuration on these different baselines : Debian root of course.

Now on Debian 7.4 :
The Broadcom BCM4313 driver is not loaded by default (not free product) for my wifi card. This is stated thru the UNCLAIMED declaration

Code: Select all 
sudo lshw -c network
 *-network UNCLAIMED
       description: Network controller
       product: BCM4313 802.11b/g/n Wireless LAN Controller
       vendor: Broadcom Corporation
       physical id: 0

[Code] ...

Unclaimed means : no driver found (no kernel association)

So I installed the driver located in the non-free backports by adding this target into the repository

Code: Select alldeb http://http.debian.net/debian/ wheezy main contrib non-free

and install :

Code: Select allsudo apt-get update && apt-get install firmware-brcm80211
sudo modprobe brcm80211

Check seems OK :

Code: Select allsudo lshw -c network

  *-network
       description: Wireless interface
       product: BCM4313 802.11b/g/n Wireless LAN Controller
       vendor: Broadcom Corporation
       physical id: 0

[Code] ....

I can't connect with wlan0, it doesn't work. I found information here regarding WPA2/PSK wifi configuration on debian : [URL] ....

so I added this setup to my interfaces file an got :

Code: Select allauto lo
iface lo inet loopback

allow-hotplug wlan0
iface wlan0 inet dhcp
 wpa-ssid Hznteam-Datacenter
 # hexadecimal psk is encoded from a plaintext passphrase
 wpa-psk 12345678901234567890123456

It's worth ! no more wifi network are detected and ifconfig gives no ip address allocated :

Code: Select allwlan0     Link encap:Ethernet  HWaddr 78:e4:00:4e:49:a3 
          UP BROADCAST MULTICAST  MTU:1500  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

[Code] ....

View 7 Replies View Related

Debian Configuration :: Xen - Qemu - Fails To Get Into Gnome

Jan 15, 2010

I've just installed lenny from dvd, and am just settling in. I'm curious about virtual machines. so I've installed xen. With xen comes qemu by default. Now the setup I've recently become familiar with is Suse-11 which is quite slick.In Suse, Yast provides a distribution prepared virtual management section for xen, including an installer. Debian's setup is similar but not a clone. I want to try out the installer. Aside from the differences, debian has a screaming deficit. On booting dom0 in Lenny, if fails to get into gnome, badly. I can tell what's probably wrong, but I need to fix it. Now I'm also a gentoo fan and very practised at posting queries, so here goes.

Debian's config for X is somewhat unhelpful. The xorg.conf just states Configured device and configured monitor for its components. If it expanded on just what the settings were it would help. What I have is a frambuffer driver not loadinf or being implemented.

View 14 Replies View Related

Debian Configuration :: Update Linuximage Fails ?

Dec 9, 2010

I have squeeze using the default setup with 5 seperate partitions on hard drive. All other updates are fine but it will not install the Linux-Image-2.6.32-5-amd64. I get message that not enough room. I think this is the kernal update. I use update manager. Is there a fix for this short of resizing the partition. This is a one computer/user setup. I had this problem on a previous install of stable and ignored it thinking that it was a glitch. That install was an experimental setup and I liked it but it didn't work on the internet very well so went to testing.

View 5 Replies View Related

Debian Configuration :: Grub Fails To Load From EFI?

Mar 8, 2011

I have happily been booting debian through grub2 by chain loading it with efi (rEFIt), until today, and now get to begin another learning experience I've been using linux for a while, and kept seeing the guides for splitting up /, /var, /tmp, /usr, and /home, into different partitions, so I did just that when I switched from Ubuntu to Debian (I've realized that this was a little bit pointless because I formated them all as ext4, but at least it acts as a safety for mission critical drives when I overfill /home. I unfortunately didn't give /tmp enough space, and it kept crashing SimpleScan so I decided to use gparted to resize it.

The operation went alright as far as I can tell, and was straight forward because there was some free space behind it so I only had to append the partition. I synced the master boot record through rEFIt as usual, but when I booted the linux partition grub did load, and only a blank screen is presented. I eventually figured out I could use the gparted live cd to boot back into debian, and have been screwing around for a while with grub commands trying to figure out how to allow rEFIt to successfully boot GRUB on its own again. I ran grug-mkconfig to replace my /boot/grub/grub.cfg file and have rebooted but that did not help.

I tried reinstalling grub and grub-common with apt-get, but I didn't purge configuration settings for fear of losing something important. My current focus is on the command grub-install. I think i just need to run this command with the /boot device, like su - root; grub-install /dev/sda1 or some thing like that. wipe out the MBR on /dev/sda1, or screw up what good configuration is left in grub, so I want to make sure that I'm using the right /dev. Currently the gparted output looks like this:

/dev/sda1: fat32 - GPT (gpt from fdisk, gparted shows EFI with the boot flag)
/dev/sda2: hfs+ - MacOSx
/dev/sda3: ext4 - /root

[code]...

how the gnome live gparted disk would have been able to boot. I have access to a hard drive so I'll probably end up making backup images of as many of the partitions as I can, and then try more drastic bashing around, but if anyone has any suggestions/wisdom they could offer while I'm researching solutions I'd appreciate it. I eventually want to try to axe my osx partition and boot directly from GRUB2-EFI so I figure it is worth the investment in time to get to know grub a little bit more intimately.

View 3 Replies View Related

Debian Configuration :: After Installing GRUB Win 7 Fails To Boot

Nov 26, 2015

I have a ~ 2008 notebook (Compaq CQ60-137EL) on which I had Windows 7 only (it was sold with Windows Vista installed).

Later I installed Debian Jessie 8.2.0 Stable ("Graphical expert install" from DVD), along with GRUB as a boot manager (I chose not to install it on the EFI removable media path).

Since then, if I select Windows 7 on the GRUB boot screen, I see "Starting Windows...", and after few seconds the screen flashes for a moment, and then the PC reboots: I see the bios screen, followed by the GRUB screen again.
What's even more weird about this is the fact it just happens only in like ~50% of the cases. In the other 50%, Win7 starts flawlessy.

I even tried to install Debian first, then Windows 7, then re-install GRUB, but I got the same issue, even with both system freshly installed.

On 6 attempts, 3 times it worked and 3 times it didn't.

On my desktop PC I'm in the same setting, but I don't have this issue. I think it may be related with the fact I have Win7 on a SSD and I installed Debian on a separate HDD, while on my notebook, as you can imagine, there's just one single HDD.

View 11 Replies View Related

Debian Configuration :: Jessie With XFCE - Service Fails

Feb 10, 2016

I am using Jessie with XFCE and I tried to write a service which executes a script to change my wallpaper. When I try to start the service with systemctl start wallpaper.service it fails and I get the outout below from systemctl status wallpaper.service

I don't think it to be a permissions issue, they are -rw- r-- r--

This service is called by a timer that goes off daily. Below is wallpaper.service

View 5 Replies View Related

Debian Configuration :: Connect To Proftpd But Upload Fails

Jul 22, 2010

I finally have my system to where I can connect to proftpd but my uploads fail. I think my problem lies in the upload folder. I do not really understand where to put it. Will someone look at this config file and tell me where to put it and what I need to do to get it working. A basic anonymous configuration, no upload directories.

[code]...

View 14 Replies View Related

Debian Configuration :: Popcon Mail Notification Fails?

Mar 5, 2011

I would like to use debian's popularity contest utility as I think it's an important tool for the developers and packagers, but it seems to be broken. I received the following notification after a recent full-upgrade from Lenny to Squeeze:

From MAILER-DAEMON Thu Nov 18 19:14:25 2010
Envelope-to: root@mediacenter.local
Delivery-date: Thu, 18 Nov 2010 19:14:25 +0200
X-Failed-Recipients: survey@popcon.debian.org
Auto-Submitted: auto-replied

[Code].....

View 3 Replies View Related

Debian Configuration :: Resume After Suspend Fails With Kernel 2.6.36

Aug 27, 2011

I'm having problems with resume after suspend to RAM. The machine starts to wake up, but the screens (multi mon VGA and DVI setup) are black and the keyboard doesn't light up. After ~20 seconds there's some brief disk activity and then the computer reboots. 100% repeatable with affected kernel versions. My test method is simple, I boot the machine on the kernel's recovery option, log on as root and run "PM_DEBUG=1 pm-suspend". I haven't found anything in the logs after a failed resume.

Here's the situation:
I have a SSD disk. To get TRIM support I have to use kernel 2.6.33 or later, which means that the standard kernel in Squeeze is too old.I have Nvidia graphics, and there was a change in 2.6.34 that breaks older versions of xserver-xorg-video-nouveau (version 0.0.15, used in Squeeze), I can't use Debian Squeeze with a kernel newer than 2.6.33.x.My machine (XFX GeForce 9300 motherboard) won't resume from suspend to RAM if I use a kernel newer than 2.6.36. There are no BIOS updates available.

My options:
Install newer kernel from Squeeze backports (2.6.38.2 last time I tried). <--- Not doable b/c of resume problems. Upgrade to Wheezy, which uses kernel 3.0.x. <--- Not doable b/c of resume problems.Compile a vanilla kernel. So basically I'm forced to compile my own vanilla kernel, 2.6.33.x on Squeeze or 2.6.35.x on Wheezy. I won't be stuck with an unsupported kernel version in the near future, but so far I've failed miserably.

I know that the latest kernel version where everything works is 2.6.36.x (no longer maintained), 2.6.37.0 and later cause resume problems (I've tried 2.6.37, 38, 39 and 3.0.0, .0.1). I've tried doing a git bisect on the kernel, but didn't succeed, ended up on 2.6.36-rc5 which is weird considering that 2.6.36.4 works. There may be several suspend/resume bugs in different kernel versions that messed up the bisecting results.

View 2 Replies View Related

Debian Configuration :: Gnome Login Screen Fails To Start

Oct 6, 2015

Today I upgraded my system to the Nvidia driver 340.93 and 4.2.0-1 kernel on Debian Stretch.

While I wait for the gnome login screen to pop up I get the "Oh no something has gone wrong" message.

When I log in from another terminal and execute startx , gnome initiates and starts although settings like my resolution and other xserver settings are not loaded.

From the journalctl I believe the error is located in the following section:

Code: Select allOct 06 14:23:17 DEBIAN-PC org.a11y.atspi.Registry[1692]: SpiRegistry daemon is running with well-known name - org.a11y.atspi.Registry
Oct 06 14:23:17 DEBIAN-PC gnome-session[1680]: X Error of failed request:  BadValue (integer parameter out of range for operation)
Oct 06 14:23:17 DEBIAN-PC gnome-session[1680]: Major opcode of failed request:  154 (GLX)

[Code] ....

I reinstalled the xorg-xserver and the nvidia drivers and I get the same behavior.

Looking for some info in order to reconfigure the gnome-session to work?

View 12 Replies View Related

Debian Configuration :: Update-initramfs Fails When Upgrading To Jessie

Oct 17, 2015

I'm just completing an upgrade from wheezy to jessie and get the following error

Code: Select allProcessing triggers for initramfs-tools (0.120) ...
update-initramfs: Generating /boot/initrd.img-3.2.0-4-amd64
E: intel-microcode: unsupported kernel version!

With a message like this I'm wondering if it's safe to reboot as well as how to resolve.

Is this somehow related to the change to only update the microcode on boot as reported earlier in the upgrade?

Code: Select allintel-microcode: microcode will be updated at next boot

View 5 Replies View Related

Debian Configuration :: PIP Installation Fails For MySQL Connector Python

Apr 6, 2016

I got assigned to a project, where the installation is done over ansible. As I'm new in linux, python, django, ansible I wanted to try this out on a empty linux debian.

Code: Select alluname -a

Linux DebianABC 3.16.0-4 amd64 #1 SMP Debian 3.16.7-ckt20-1+deb8u4 (2016-02-29) x86 64 Gnu/Linux

When I now run my ansible playbook it tries to install mysql and suddenly I get an error:

Code: Select all:stderr: DEPRECATION: --allow-external has been deprecated and will be removed in the future. Due to changes in the repository protocol, it no longer has any effect.

DEPRECATION: --allow-unverified has been deprecated and will be removed in the future. Due to changes in the repository protocol, it no longer has any effect.

Could not find a version that satisfies the requirement mysql-connector-python==1.0.12 (from -r /home/abc/abcTest/requirements.pip (line 36)) (from versions: )

No matching distribution found for mysql-connector-python==1.0.12 (from -r /home/abc/abcTest/requirements.pip (line 36))

FATAL: all hosts have already failed -- aborting

So I checked the target machine and tried to run

pip install -vvv -r requirement.txt mysql-connector-python

As version 1.0.12 is an old version, I was searching and tried the following: [URL] ....

But also if I run the installation by direct download I have the same error message:

Code: Select allabc@DebianABC:/home/abc/abcTest$ pip install -r requirements.pip -vvv mysql-connector-python
Collecting http://cdn.mysql.com//Downloads/Connector-Python/mysql-connector-python-1.0.12.tar.gz (from -r requirements.pip (line 36))
  Starting new HTTP connection (1): cdn.mysql.com
  "GET //Downloads/Connector-Python/mysql-connector-python-1.0.12.tar.gz HTTP/1.1" 200 230923

[Code] ....

I was reading about the version requirements from PEP: [URL] .... but as the version looks ok, this should not be the problem.

View 0 Replies View Related

Debian Configuration :: Openssh-server Fails To Restart During Update?

Feb 12, 2010

So this very (for me) important little package fails me once again. But this time it refuses to restart/start

This is the output:

Setting up openssh-server (1:5.3p1:-1)
Restarting OpenBSD Secure Shell Server: sshd: failed!
/dev/null is not a character device!
invoke-rc.d: initscript ssh, action "restart" failed.

[Code].....

The error is within the /etc/init.d/ssh script. ("error")

This is in squeeze so I can only blame my self, but.. This is one of the packages that fair and square should not fail to install/update/start/restart no mather what!

View 9 Replies View Related

Debian Configuration :: (GRUB2) Grub_env_find Not Found - Boot Fails

Mar 26, 2010

My evil nemesis Grub2 has decided to make a move on me again! So I rebooted a few minutes ago and got this:

Welcome to Grub
error the symbol 'grub_env_find' not found
Entering rescue mode

View 9 Replies View Related

Debian Configuration :: Firestarter Fails To Start On System Boot

Jul 11, 2011

I have just recently installed firestarter to get an idea of iptables editing with a GUI. Firestarter works great and I love it, however when I turn my system on, and my system is booting up the terminal displays a "Failed" message when attempting to start up firestarter. Now I have been doing my homework (reserch) and have read that a user will get this error because firestarter trys to load prior to the network manager starting up. I have also read some other variables that can cause this is if you use network manager and have a password on your user account (which I do have) can cause this issue.

However in most cases from what I have read is even though it gives the user a "Failed" startup message, once the user logs in, and is connected to the internet firestarter will actually load the iptables. I did some tests and from what I understand I can see that this is true because I have allowed access to certain torrent trackers, and denied access to others, and I can see some come online. Does firestarter load iptables once the user logs in? Or once it fails to load, does it not load at all unless you manually open/load the application. If firestarter just modifies iptables, then once I save my listings in firestarter then I really don't need it to start up correct?

View 1 Replies View Related

Debian Configuration :: NVidia Driver Fails With Built Kernel?

Jul 30, 2011

I've posted here before (viewtopic.php?f=5&t=66322) about problems arising from my attempts to get an nVidia driver to work with my custom kernel. Now those problems are all fixed, and I'm back to where I was: the built kernel boots fine, but the nVidia driver fails.

The custom kernel is as near to the stock one as I can make it, I'm just trying to find a working build process at present, before trying to build a later-version kernel.

I used sgfxi with "-! 40" to build the nVidia driver for my custom kernel; it reported that everything was fine.

With stock kernel - 2.6.32-5-amd64 ...

Extracts from /var/log/Xorg.0.log:
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
code....

View 6 Replies View Related

Debian Configuration :: Dmraid Device Fails To Mount After Jessie Upgrade

Oct 18, 2015

I eventually gave up and migrated to mdadm. Works just fine. Having upgraded to jessie and solved one problem

[URL] ....

I find the next one. When I boot into jessie my RAID device (just a data partition not /) is not found causing the boot to fail as per problems reported here

[URL] ....

After booting I can mount my RAID device but if it's in the fstab when booting it fails. Also, I notice that some of my lvm device names have changed. After a bit of hunting around I found a couple of solutions pointing to running dmraid as a service during boot and changing the entry for the RAID device in fstab to use the UUID.

[URL] .....

This seems to work. However this seems to be a workaround and as the lvm device paths for my / and /usr partitions have also changed, I'm wondering if there is a bug here as mentioned in the second link?

The / and /usr paths changed to /dev/dm-2 and /dev/dm-3 from the /dev/mapper/ form.

View 2 Replies View Related

Debian Configuration :: Hibernation Fails With Invalidating Stale Software Suspend?

May 20, 2011

My hibernation was working out_off_the_box but now it has strange issue. This is debian testing with kernel 2.6.38.4 "hibarnation-disk" hibernate successfully ,with an error though ( seen from hibernate-disk -v2 --dry-run) hibernate-disk:Warning: Tuxonice binary signature file not found Anyhow , after executing the hibernation , on the next boot, the system boots from scratch and not from the resume image. During boot a message is displayed though Invalidating stale software suspend images I have done some google search but none of the solution work so far, including reinstalling the package itself.

View 6 Replies View Related

Debian Configuration :: Squeeze: Suspend/hibernate Resume Fails With Radeon Graphics

Aug 6, 2010

I am running Squeeze on an older Compaq EVO laptop with radeon graphics.

A few months ago, after an upgrade, suspend and hibernate stopped working. The suspend or hibernate worked fine, but the resume just hung with a black screen. I finally got around to looking into it and found a workaround.

The workaround is to disable Kernel Mode Setting for the radeon. This can be done by adding the boot parameter "radeon.modeset=0" or by editing /etc/modprobe.d/radeon-kms.conf so that it includes the line "options radeon modeset=0".

If you are interested in the details, you can search for problem reports related to radeon kernel mode setting.

View 3 Replies View Related

Debian :: Openssh-server Auto Configuration Fails When Upgrading Lenny To Squeeze?

Sep 10, 2010

I'm in need of a bit of assistance from you Debian users. I have two servers that I thought were identical installations, both running Debian Lenny. Tonight I started the upgrade to Squeeze on both servers and one of them went smooth. The other one started out good but fails on the postconfiguration of openssh-server. I'm getting the following message:

Code:
Setting up openssh-server (1:5.5p1-4) ...
Auto configuration failed
2524:error:0E079065:configuration file routines:DEF_LOAD_BIO:missing equal sign:conf_def.c:366:line 67
invoke-rc.d: initscript ssh, action "restart" failed.

[Code].....

It looks like there's an error in one of the files in openssh-server that prohibits it from installing correctly. However on the other server it all went well.

View 3 Replies View Related

Debian Configuration :: Getting Network Error - Every Time Rebooting My Server Lost My Network Config

Mar 3, 2011

I was playing with my debian server when something went totally wrong while i was editing something on my network interface,i removed those crap that i wrote and left the network interface configuration as it was

Like for example after re-editing my network interface,it was like :

As i did a network restart, i get this error saying :

There is already a pid file /var/run/dhclient.eth0.pid with pid 2802 killed old client process, removed PID file.

What is this error and how can i fix it,because every time im re booting my server i lost my network config.

View 1 Replies View Related

Debian Configuration :: Network Not Work When Use 2 Network Cards

Oct 24, 2010

I'm planning to use Debian as the OS for a firewall machine, which will sit between my internet connection and the rest of my computers. Now my network is all wired, no wireless whatsoever. I'm using the onboard the motherboards cat5 socket which seems to be using the VIA rhine driver and I'm also using a 3com 100MBps card.

I can list the machine spec if you want but it's nothing special, an old Athlon 64 rig with 1gb ram and an OEM motherboard, it all seems to work ok apart from the internet doesn't' seem to work. Lenny seems to detect both cards ok and I even used the net install CD and it managed to download everything using the 3com card.

The strange thing is when I'm in Lenny, I can't seem to connect. I can ping google, but when I try and view a webpage, the browser just sits there with a while screen... Could it be that using 2 network cards is confusing Debian? Right now I've only got the modem hooked up the the 3com card, and nothing connected to the onboard network card.

View 5 Replies View Related

Debian Configuration :: Network Manager Is Quirky In KDE Debian

Feb 14, 2011

I have a new install of Debian Squeeze from debian-6.0.0-amd64-kde-CD-1.iso but I'm experiencing problems with the wireless internet applet in the taskbar.When the computer boots, it doesn't connect automatically eventhough I have it set as such. I have to fiddle with it until I get the request from KDE Wallet Manager to insert the password to complete the connection. I didn't have this behavior in Kubuntu.

View 1 Replies View Related

Debian Configuration :: Radeon DRI Driver, Clicking "Apply" It Fails?

Mar 3, 2011

i couldn't get out after many hours of reading documents/posts/forums etc.

The issue:In Kde 4.4.5, using xorg and radeon opensource driver, i can't set OpenGL for desktop effects. Clicking "Apply" it fails. OpenGL seems corrupted someway. I have to stay on XRender. This is the glxinfo output:

glxinfo | grep OpenGL
OpenGL vendor string: Mesa Project
OpenGL renderer string: Software Rasterizer
OpenGL version string: 2.1 Mesa 7.7.1
OpenGL shading language version string: 1.20
OpenGL extensions:

The story:i was running previously kde with nvidia propertary driver and a nvidia board. Then i removed the board for a fault and put a sapphire radeon HD5450. Initially i set up propertary radeon fglrx. At the end, i decided to use the opensource drivers, removed in the best way all fglrx files and links. So i then followed the wiki for reinstall open source radeon drivers, did it many times, also reinstalling xorg with purge, same for libgl1-mesa-xxx etc, but i still cannot use the OpenGL hardware support (should be DRI, that is correctly installed but not loaded).

Seems to be really an opengl corruption, if i disable the check on apply, and select OpenGL rendering, i get a complete blank screen.

Some information of the system:
01:12 ] angelo@angel3 [~] cat /proc/cpuinfo
processor: 0
vendor_id: GenuineIntel
cpu family : 6
code....

View 3 Replies View Related

Debian Configuration :: Restore From Hibernate Fails From Time To Time?

Apr 28, 2011

I have a Insprion 14R (N4010) and when I hibernate it will usually restore without a problem, but maybe 15% of the time it will reboot while loading. I would like to figure why, since I'd rather not lose anything... My swap space is 5.9GB, I have 4GB RAM (video uses 1gb, so I have 3gb usable)

lspci says

00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)

[code]....

I do have the hibernate package installed...

View 6 Replies View Related

Debian :: Can't Save Network Configuration

Jan 18, 2010

I'm opening up Network and it asks me for the root password. I enter it and the program comes up. I enter a static address for both eth0 and eth1.

I don't see a Save button. Eventually I get out of the configuration tool. The next time I run the tool, my static addresses have not been saved.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved