I have downloaded the entire Debian 5-dvd set. I want synaptic, apt-get and aptitude to first check online if there's a new version of the packages selected to install, if there's a new version, then get the packages online and install, if not, then ask to insert the corresponding dvd and install from that. Is there anyway to configure this?
View 8 RepliesI have just installed Debian Lenny and was trying to upgrade the installed packages from the packages.debian.org site. when i asked synaptic to add the downloaded packages the would not appear, but when i checked the .xsessions file there are entries saying that the packages were being ingnored because they were either different versions, the MD5 did not match or even "can't find pkg". i have to use the local library to download the packages because i dont have an internet connection at home.
[Code]...
I am working on a project which targets both 32 and 64 bit architectures at the moment. My system is amd64. I added i386 architecture using this guide. However, my problem is
Code: Select allapt-get install package-name:i386
prompts the removal of currently installed packages (amd64 arch.) which is the problem.
Code: Select allReading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libportaudio0:i386
[Code] ...
Some of the packages I am talking about are
-libegl1-mesa-dev:i386
-libportaudio-dev:i386
Now, as of now, I want to carry out the compilation using 32 bit libraries, however, I really don't want to install 64bit version of all prerequisites each time I switch the compilation from 32 bit to 64. Is there any way to have both architectures at the same time?
I completed an installation of Ubuntu 10.10 LTS 64-bit as a guest operating system on a VMWare server. Somehow during the installation process, I neglected to install a GUI desktop. I want to install the gnome desktop, but I am running into a series of errors similar to the one shown below:
[Code]....
I'm wondering, where can I get older .deb packages?I want to install Project Open - ERP, ITSM system on my Debian, but I need older postgresql-8.1 not the latest 8.3. Even that I'm suspecting compatibility issues.
View 1 Replies View RelatedI have Debian Lenny installed and I am using the KDE interface.How do I get to use tar.gz packages with the kpackage program? Anyone know hat else I have to install in order to make it work?
View 3 Replies View RelatedAfter what seems like a Long time trying off-shoots of Debian, I installed--and am still installing-- packages from the DEbian distribution. Is there an entry for the sources.list that would give me things that are Asus EEE-specific? Stuff like the evolution mailer and the touchpad controller? (I need to turn the touchpad off, e.g.).
View 12 Replies View RelatedHow do I install software packages? I downloaded google chrome and I seem to be unable to install it. Can't find the appropriate program to open it with.
View 2 Replies View RelatedI am trying to keep a stable system (after a date with the unstable version which broke everything ) but a package (namely deluge) is horribly out-of-date. It is better in the unstable packages.I read the official documentation with the preferences file, pinning and the rest of the apt zoo but after a few tests I am still there with my old deluge in my stable environment.(in reality I managed to upgrade deluge by swapping the sources.list file with one with only the unstable repositories -- but this is not a particularly clever approach)I would be very grateful if someone could give me the right content for the preferences file which would allow to keep the system at stable level, except for the deluge package which should be updated to the newest, bleeding edge version.
View 3 Replies View RelatedWhen I try to install new packages I get following errors
Code: Select allE: cups: subprocess installed post-installation script returned error exit status 1
E: ntp: subprocess installed post-installation script returned error exit status 1
E: rsyslog: subprocess installed post-installation script returned error exit status 1
E: at: subprocess installed post-installation script returned error exit status 1
E: exim4-base: subprocess installed post-installation script returned error exit status 1
[Code] ....
Here is some detail
Code: Select allSetting up cups (1.5.3-5+deb7u6) ...
insserv: warning: script 'S99pcloudd_init' missing LSB tags and overrides
insserv: warning: script 'pcloudd_init' missing LSB tags and overrides
insserv: script pcloudd_init: service pcloudd_init already provided!
insserv: warning: script 'pcloudd_init_start' missing LSB tags and overrides
insserv: There is a loop at service minissdpd if started
[Code] .....
I was going to try out E16 and installed it via apt-get install. It ran through the usual of retrieving the required dependencies and whatnot, but as it was "setting" everything up as Debian usually does when installing packages, it seemed to take forever, to install a measly 6 or so megabytes.
Why is this? I regularly run "apt-get autoremove", "apt-get autoclean", and "apt-get clean", as well as check for orphaned packages and residual configs in Synaptic. Also, for some reason, Synaptic finds more packages left behind than the terminal finds.
I have downloaded the deb packages for OpenOffice 3 to my Debian machine under home. I can't figure out how to install these packages or add them to the list using Synaptic Package Manager.They are all inder a directory under /home/stephen.
View 2 Replies View RelatedWhen trying to do a system update, I'm facing following error:
Code: Select allroot@machine: apt-get upgrade
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following packages have been kept back:
libdevmapper1.02.1
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
1 not fully installed or removed.
[Code] ....
No such file or directory of an older and unused kernel? What's wrong with my system?
More about my machine, which runs Debian 6:
Code: Select allroot@machine: uname -a
Linux machine 2.6.32-5-686 #1 SMP Sat Jul 12 22:59:16 UTC 2014 i686 GNU/Linux
Code: Select allroot@machine: cat /etc/apt/sources.list
deb http://http.debian.net/debian/ squeeze main contrib non-free
deb-src http://http.debian.net/debian/ squeeze main contrib non-free
deb http://security.debian.org/ squeeze/updates main contrib non-free
deb-src http://security.debian.org/ squeeze/updates main contrib non-free
deb http://http.debian.net/debian squeeze-lts main contrib non-free
deb-src http://http.debian.net/debian squeeze-lts main contrib non-free
I use Jessie, with the Aptitude curses interface for package management. It seems that every time I successfully uninstall/purge a package (along with its dependencies), then the next time I try to install/uninstall anything else it wants to reinstall that package (and its dependencies). It takes several (I haven't counted) "don't install" instructions from me before it will forget about it.
View 3 Replies View RelatedSo, as per Arch Linux's wiki, I tried to make some optimisations to the intel driver through setting it up in Xorg.conf (or as advised by that wiki article, in '/etc/X11/xorg.conf.d/20-intel.conf' ), but I've ran into trouble enabling DRI3. Here's my current config file:
Code: Select allSection "Device"
Identifier "Intel Graphics"
Driver "intel"
Option "AccelMethod" "SNA"
Option "DRI" "3"
Option "TearFree" "true"
EndSection
So far everything works fine, I haven't seen any noticeable tearing, nor did I had any problems with any graphics-intensive programs I run, but there's a slight problem with the DRI3 part as indicated by Xorg's logs:
Code: Select all[ 26.556] (II) Loading sub module "dri2"
[ 26.556] (II) LoadModule: "dri2"
[ 26.556] (II) Module "dri2" already built-in
[ 26.556] (==) Depth 24 pixmap format is 32 bpp
[ 26.616] (II) intel(0): SNA initialized with Haswell (gen7.5, gt2) backend
[ 26.616] (==) intel(0): Backing store enabled
[Code] ....
First of all it still mentions the DRI2 driver, is this supposed to happen, or did something go wrong? Also it complains that it cannot find a file, which I can't figure out which package it belongs to, and taking a quick search around the interwebs hasn't produced anything useful...
The IGP is the CPU, which is actually a i5-4460... which according to Wikipedia it has a HD Graphics 4600 GPU.
So I just installed Debian Lenny on my PC (the install went fine). After installing, I went into aptitude and noticed that most of the packages available in the repository are out of date (python 2.5, GCC 4.3). System Update tells me that I am up to date, and when I tell synaptic/aptitude to mark all updatable packages, it does nothing. I have tried typing apt-get update as root aswell. Nothing worked.
I installed Debian with the first DVD from [URL]. During the installation, I told it to download anything that wasn't on the DVD. Shortly after installing, I had manually edited my /etc/apt/sources.list and commented out the CD line. Could any of this have messed up APT?
My new laptop works out of the box except for the video and the ethernet. For this, I have to use a later kernel than the Debian kernel (debian squeeze is currently 2.6.32). Upgrading to the new kernel (without moving to the testing dist itself) was pretty easy. I just installed linux-image-2.6.38-2-amd64 and linux-base from the testing distribution by manually downloading and using dpkg. After that, ethernet and video started working.
However, my virtualbox installation no longer works because the drivers do not match the kernel. I am used to this; whenever debian upgrades the kernel on me, I have to run "/etc/init.d/vboxdrv setup". This rebuilds the drivers. This failed for me, however, because it could not find the headers. So, I installed some more packages:
linux-kbuild-2.6.38
linux-headers-2.6.38-2-common
linux-headers-2.6.38-2-amd64
Now, when I rebuild it, I get this:
# /etc/init.d/vboxdrv setup
Stopping VirtualBox kernel modules:.
Uninstalling old VirtualBox DKMS kernel modules:.
[code]....
I have a fresh Debian install, since this install was on a desktop, I had an internet connection and didn't notice (it was late, I was half asleep) I opted to download a whole load of packages I didn't really need. I thought all was doomed until I remembered that I have done another Debian install but a week ago on a laptop, which has a nice clean install without all the bloat.
So I ran dpkg --get-selections > selections
and had it sent to my new desktop installation.
Now if I run dpkg --set-selections < selections followed by dselect-upgrade nothing happens. I assume this is because the smaller list contains all the packages 'to be installed' which already are, and all the missing packages are not being purged. Do I need to explicitly add all the packages I want to purge to the 'selection' list or is there a better way of doing it?
I want to build my own binary package that replaces several from the repositories.But then whenever I install something that depends on libffado2, aptitude wants to uninstall mypkg and install libffado2. Why doesn't Provides work here?
View 3 Replies View RelatedIf I want to compile a kernel from source (from kernel.org), including all the drivers I need regardless of their origin, I would not need any firmware-*.deb packages, right? Do the firmware packages add anything that is not present in the latest kernel?
View 3 Replies View Relatedi did an install of squeeze without selecting anything during tasksel. after install i changed my sources to testing, updated, and did a dist-upgrade. i then installed xfce4 and xfce4 goodies. i noticed some of the xfce4 packages have the current state 'pa'. for example:
[Code]...
this makes me worry some things didn't install all the way, because if i did aptitude install xfce4-power-manager it would install it and leave make the current state 'i'.is there anyway to install all the packages labeled 'pi'?
I've been trying to install a few programs with the basic Debian repositories on my Jessie edition, but I keep getting a "broken packages" error and "cannot be installed" error, and the programs won't install.
I went to other repositories, e.g. Mint and Ubuntu, and with these included in my sources.list file, I was able to install the desired programs.
If the programs are listed in Debian and the dependecies as well, why would they not install?
Namely
gnome
gnome-desktop-environment
Now that seems odd to me. Am I ok to proceed or will I be left without a desktop? Following advice in an earlier thread, I pointed my sources.list at testing to move to a rolling distro; having installed squeeze beta 2, I'm wondering if using testing is what is causing this?
I have 32-bit Debian 8 and am trying to install Vmime [URL] .....
apt-get cannot locate these packages:
apt-get install vmime0
apt-get install libvmime-dev
I have an issue raised on Vmime's Github page too [URL] .....
I have an issue with packages. When I try to install any package then I receive error like this one below.
e.g. install Lynx:
Code:
# apt-get -f install lynx
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these:
The following packages have unmet dependencies:
libperl5.10: Depends: perl-base (= 5.10.0-19lenny3) but 5.10.0-19lenny2 is to be installed
libsnmp15: Depends: libsnmp-base (>= 5.4.1~dfsg-12) but it is not going to be installed
lynx: Depends: lynx-cur (>= 2.8.7dev9-2.1) but it is not going to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
So I decided to remove libperl5.10 which apparently mess. But its not that easy, just take a look:
Code:
# apt-get --purge remove libperl5.10
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these:
The following packages have unmet dependencies:
libsnmp15: Depends: libsnmp-base (>= 5.4.1~dfsg-12) but it is not going to be installed
Depends: libperl5.10 (>= 5.10.0) but it is not going to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
...and now I don't know what to do ?
I had been doing some removal of packages, and things went well, or so I thought. Now whenever I try and install any package using aptitude, some old state is lingering around and wants me to install packages that I do not want, and remove some packages that I am not sure about removing (did I actually select those to be removed??) I removed libvirt etc, and now it wants to come back? Also, like I mentioned, why remove those other four packages?
The following NEW packages will be installed:
aqemu gtkrsync libvirt-doc libvirt0 python-libvirt qemu qemu-kvm qemu-system qemu-user qemu-utils virt-top virt-viewer virtinst
The following packages will be removed:
dnsmasq-base{u} netcat-openbsd{u} python-gtk-vnc{u} python-vte{u}
0 packages upgraded, 13 newly installed, 4 to remove and 176 not upgraded.
Need to get 2,210kB/24.3MB of archives. After unpacking 72.7MB will be used.
Do you want to continue? [Y/n/?] ^C
Running squeeze, and enjoying it so far, apart from a broken out of the box synergy (compiled my own synergy-plus to fix that issue) and a buggy samba client.
Does aptitude(or apt-get) have the functionality to remove the packages installed from using build-dep? It just seems convenient if you want to remove a program that was built from source.
View 4 Replies View RelatedVirtualBox is awesome tool for experiment and learning Linux.On the Linux guest OS, I installed standard system without Xorg.i expected it remove all the packages that come along with gnome-terminal previously.Only gnome-terminal was removed, 750kB free space. Now the system have 149MB packages as waste data IMHO.It doesn't look right to me.
View 4 Replies View RelatedI have a computer with internet access with amd64 architecture running Debian stable (Lenny). I have another computer with NO internet access with i386 architecture running Debian stable (Lenny).I want to download some packages for the i386 computer using the amd64 computer. So far, the only way I can see to do this is to use dpkg-architecture to temporarily change to i386 on the internet computer, run aptitude with the download-only option to retrieve the packages I need with all suitable dependencies, then switch the internet computer back over to amd64.
I can't imagine I'm the only person who ever needed to do this, and yet I've had no luck finding any advice. The method I described seems rather awkward - is there a more elegant solution?
I apologize to the membership, I realize now the absurdity of this subject. Having now studied the online repository search functions closer, I see it appears packages are automatically retrieved with all necessary dependencies. As such, it is not necessary to use apt and its various functions to do the job.
Are the 1.3 Wine packages availible at [url] compatible with the Squeeze kernel? What about future updates to the packages there?
View 3 Replies View Related