Namely
gnome
gnome-desktop-environment
Now that seems odd to me. Am I ok to proceed or will I be left without a desktop? Following advice in an earlier thread, I pointed my sources.list at testing to move to a rolling distro; having installed squeeze beta 2, I'm wondering if using testing is what is causing this?
I am working on a project which targets both 32 and 64 bit architectures at the moment. My system is amd64. I added i386 architecture using this guide. However, my problem is
Code: Select allapt-get install package-name:i386
prompts the removal of currently installed packages (amd64 arch.) which is the problem.
Code: Select allReading package lists... Done
Building dependency tree
Reading state information... Done
The following extra packages will be installed:
libportaudio0:i386
[Code] ...
Some of the packages I am talking about are
-libegl1-mesa-dev:i386
-libportaudio-dev:i386
Now, as of now, I want to carry out the compilation using 32 bit libraries, however, I really don't want to install 64bit version of all prerequisites each time I switch the compilation from 32 bit to 64. Is there any way to have both architectures at the same time?
Not long ago I've switched from FreeBSD to Debian. As time passes, I install some packets, use them and forget to uninstall them. In FreeBSD there was a simple (dummy) way to keep only needed packets. Once in 6 months i just deleted all packages (pkg_delete -a) and then installed only those which i needed (xfce, xmms, gmplayer, etc). Is there a way to safely remove packets and their dependencies which i don't use anymore? May be there is a way to roll back to default desktop package collection?
View 14 Replies View RelatedSince I'm running Sid. Let's assume package foo has been upgraded via apt-get dist-upgrade, and it causes a serious bug so that Sid is never able to fully start up, and is not even able to get me to the console to remove the package.
(Reword: let's assume that I upgraded the system despite apt-listbug warning me that foo had serious issues.)
Is it possible for me to remove the package and get back in? Everything I've seen online assumes that I could at least access console--but this hypothetical bug doesn't allow that.
If it were in Arch, I would just boot from the live dist, arch-chroot into the / directory, and try to remove foo via pacman. But Debian doesn't offer a live disk past Stable, so I suspect that this wouldn't work with a Wheezy disk?
Am I asking for an impossible situation, or can a troublesome package be removed from an unresponsive Sid?
I have a a few questions about Testing's update manager. When I go to the update manager I get a message saying "Do you want to perform a safe-upgrade, which does not remove packages or install new ones"? Will my entire system ever eventually get upgraded if I only ever do safe-upgrades? Or is there a time and a place to do non-safe upgrades? I did a non-safe upgrade a few days ago and all it did was mess with a bunch of OpenOffice packages.
Why are only certain packages selected by default when doing a non safe upgrade? Why is it that whenever I do a non-safe upgrade when it's done applying the updates the same packages I just installed are listed as available updates? Also, I used this website to build my sources.list and there apparently is some sort of "fatal error" with one of the repositories I selected. Is there a text file somewhere I can go to see a readout of apt-get bug reports?
I added 'testing' channel into my wheezy 'stable' box and installed packages comes from 'testing'. In this case, if I changed my mind to go back to 'stable', how could I downgrade packages updated by 'testing' channel?
View 13 Replies View RelatedIs it possible to do an aptitude remove for all packages installed in, say, the past hour? I'm looking for an easy way to keep track of lots of installed packages without having to look through the logs and write them all down.
View 4 Replies View RelatedI added Sid to my /etc/apt/sources.list, so that I could install KDE4 (as described on some random KDE4/Debian web page). However, I now think that was a mistake and it would have been better to attempt to backport KDE4 onto Lenny. Over time, more and more sid packages have crept into the system to resolve dependencies, and now my system seems a bit broken; 'top' won't run, complains about missing libtermcap which is there, my cron jobs seem to be ignored and so on.
So given a system that is a mix of Lenny and Sid, what is the best way to uninstall all the Sid packages and then get back to a clean Lenny install? Is there some way that I can list all Sid packages, maybe to a file, then use that to tell apt what Lenny packages to install after sources.list has been updated to remove Sid?
I kept a log as the system was built, of everything that had to be manually set up after the debian installer has completed when I moved from 32-bit to 64-bit, so I could just do a clean install of Lenny then reconstruct the system from scratch. However, would much prefer to use the package management tools to revert to a clean Lenny.
Does aptitude(or apt-get) have the functionality to remove the packages installed from using build-dep? It just seems convenient if you want to remove a program that was built from source.
View 4 Replies View RelatedVirtualBox is awesome tool for experiment and learning Linux.On the Linux guest OS, I installed standard system without Xorg.i expected it remove all the packages that come along with gnome-terminal previously.Only gnome-terminal was removed, 750kB free space. Now the system have 149MB packages as waste data IMHO.It doesn't look right to me.
View 4 Replies View RelatedI have downloaded the entire Debian 5-dvd set. I want synaptic, apt-get and aptitude to first check online if there's a new version of the packages selected to install, if there's a new version, then get the packages online and install, if not, then ask to insert the corresponding dvd and install from that. Is there anyway to configure this?
View 8 Replies View RelatedWhen I try to install new packages I get following errors
Code: Select allE: cups: subprocess installed post-installation script returned error exit status 1
E: ntp: subprocess installed post-installation script returned error exit status 1
E: rsyslog: subprocess installed post-installation script returned error exit status 1
E: at: subprocess installed post-installation script returned error exit status 1
E: exim4-base: subprocess installed post-installation script returned error exit status 1
[Code] ....
Here is some detail
Code: Select allSetting up cups (1.5.3-5+deb7u6) ...
insserv: warning: script 'S99pcloudd_init' missing LSB tags and overrides
insserv: warning: script 'pcloudd_init' missing LSB tags and overrides
insserv: script pcloudd_init: service pcloudd_init already provided!
insserv: warning: script 'pcloudd_init_start' missing LSB tags and overrides
insserv: There is a loop at service minissdpd if started
[Code] .....
I was going to try out E16 and installed it via apt-get install. It ran through the usual of retrieving the required dependencies and whatnot, but as it was "setting" everything up as Debian usually does when installing packages, it seemed to take forever, to install a measly 6 or so megabytes.
Why is this? I regularly run "apt-get autoremove", "apt-get autoclean", and "apt-get clean", as well as check for orphaned packages and residual configs in Synaptic. Also, for some reason, Synaptic finds more packages left behind than the terminal finds.
I have downloaded the deb packages for OpenOffice 3 to my Debian machine under home. I can't figure out how to install these packages or add them to the list using Synaptic Package Manager.They are all inder a directory under /home/stephen.
View 2 Replies View Relatedim using fedora 14 and i have a slow internet connection. i want 2 install some packages from the fedora 14 dvd instead of downloading from internet using add/remove packages. i tried to edit /etc/yum.repos.d/fedora.repo and /etc/yum.repos.d/fedora-updates.repo but it dint work.
View 2 Replies View RelatedHow to add packages using X-Window's add/remove packages option in RHEL-5.3 as it shows only the currently installed package and and does not show any thing when we click the button "available packages" ?
View 2 Replies View RelatedI've been trying to install a few programs with the basic Debian repositories on my Jessie edition, but I keep getting a "broken packages" error and "cannot be installed" error, and the programs won't install.
I went to other repositories, e.g. Mint and Ubuntu, and with these included in my sources.list file, I was able to install the desired programs.
If the programs are listed in Debian and the dependecies as well, why would they not install?
I have 32-bit Debian 8 and am trying to install Vmime [URL] .....
apt-get cannot locate these packages:
apt-get install vmime0
apt-get install libvmime-dev
I have an issue raised on Vmime's Github page too [URL] .....
I have an issue with packages. When I try to install any package then I receive error like this one below.
e.g. install Lynx:
Code:
# apt-get -f install lynx
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these:
The following packages have unmet dependencies:
libperl5.10: Depends: perl-base (= 5.10.0-19lenny3) but 5.10.0-19lenny2 is to be installed
libsnmp15: Depends: libsnmp-base (>= 5.4.1~dfsg-12) but it is not going to be installed
lynx: Depends: lynx-cur (>= 2.8.7dev9-2.1) but it is not going to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
So I decided to remove libperl5.10 which apparently mess. But its not that easy, just take a look:
Code:
# apt-get --purge remove libperl5.10
Reading package lists... Done
Building dependency tree
Reading state information... Done
You might want to run 'apt-get -f install' to correct these:
The following packages have unmet dependencies:
libsnmp15: Depends: libsnmp-base (>= 5.4.1~dfsg-12) but it is not going to be installed
Depends: libperl5.10 (>= 5.10.0) but it is not going to be installed
E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution).
...and now I don't know what to do ?
After installing Jessie, apt-get gives me a huge list of packages with the suggestion to autoremove them. Now, I've tried auto-remove once and was left with a naked Gnome, so I was wondering if there's another way to find out which packages I should keep and which I can safely remove. Is it safe to delete packages that cannot be found using the search function for the stable release? I checked them one by one here URL....How about linux images that won't appear in the above search?
linux-image-3.14-0.bpo.1-amd64
linux-image-3.14-0.bpo.2-amd64
linux-image-3.16-0.bpo.2-amd64
linux-image-3.16-0.bpo.3-amd64
linux-image-3.2.0-4-amd64
How about results shown by deborphan?
I've been reading up on ssh and I don't want anyone to connect to my computer. I am not interested in remote connectivity at all. Should I uninstall ssh? I ran Code: apt-get remove ssh and debian returned "package ssh is not installed. 0 packages removed."
I also looked online and found out about /etc/ssh/ssh_conf but all of the lines on my computer were #'d out. I also added "PermitRootLogin no" at the end. Am I safe from ssh attacks if I don't have ssh? Might be a stupid question but I don't want to fall victim. edit: it seems as though I -do- have openssh-client and openssh-server installed. Should I just leave my ssh config with PermitRootLogin no or apt-get remove openssh-client openssh-server.
I have just installed Debian Lenny and was trying to upgrade the installed packages from the packages.debian.org site. when i asked synaptic to add the downloaded packages the would not appear, but when i checked the .xsessions file there are entries saying that the packages were being ingnored because they were either different versions, the MD5 did not match or even "can't find pkg". i have to use the local library to download the packages because i dont have an internet connection at home.
[Code]...
On Debian repo I found virtualbox-ose packages there. What will be the difference in operation/function between their packages and the packages download on virtualbox.org website?
View 3 Replies View RelatedWhy does yum remove so many packages, that are essential for my work, when I'm trying only to remove mysql ?
View 14 Replies View RelatedI have updated a few packages from rawhide F16 into my F15 install. How can I downgrade the F16 packages back to sync with F15.
Yum downgrade pacakge1 pacakge2 package3 etc.
I installed a LAMP server using RHEL 5.5 but we needed a higher version of php than was available in RHEL Yum repositories. I think at the time I installed Dag Wieers and got a 3rd party package. My question is the following:
1. How do I remove the 3rd party packages?
2. How do I remove Dag Wieers from my Yum repo list?
3. Anything else I need to know to get all 3rd party packages off?
If I do a fresh 'netinst' of CentOS 5.4 x64 on a server, what is the correct way to verify that no 32-bit packages were installed or mixed in with x64? Also can someone tell me if it is safe to remove those 32-bit RPM packages?
I searched the Wiki for 'Post Install Tips' and could not find anything there or on Google.
when I try to install anything using the Ubuntu software centre, I get the following message Requires installation of untrusted packages The action would require the installation of packages from not authenticated sources.
View 1 Replies View RelatedI have uninstalled Wine but it still says the packages are installed still how do I remove them? I am also on Fedora 13.
View 3 Replies View Relatedso i recently had a problem with preupgrade (power cut mid process). anyway it seems that my system is now f13. In any event it seems that there are 785 f12 packages still remaining.yum list installed | grep f12 output can be seen here.How can I mas remove these fc12 packages?
View 2 Replies View Related