Debian :: 8.2 Hangs On Shutdown
Jan 13, 2016
Working with 8.2 DVD installation for about 5 days, Debian newbie. As subject says, screen goes dark and hangs indefinitely.
This guide: [URL]... similar to others I've read. I've done everything there to section: Status and Logs of Services, and that's as far as I've gotten.
Guide suggested posting some files, so here they are:
Code: Select all#
# Grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
[Code] ....
View 3 Replies
ADVERTISEMENT
Dec 12, 2015
I'm using Debian Sid xfce on my lenovo laptop. When i try to shutdown, the screen always stays on (the fans turn off). It says "reached target shutdown", then this happens: [URL] .... and then it hangs. I have to press the power button to shut it down. (I have the same problem with reboot). I had the same issues with Jessie.
Things i tried so far and didn't work:
Code: Select allshutdown -h now
shutdown -p now
halt
poweroff
systemctl poweroff
init 0
I edited /etc/default/grub and added the following options at "GRUB_CMDLINE_LINUX_DEFAULT":
acpi=force, acpi=off*, acpi=noirq
*acpi=off: shutdown (not reboot) worked a few times but i didn't have wifi and power manager didn't seem to work
none of them worked..
I have no energy or wake up options at my BIOS.
I found out that i can normally reboot with the Alt + sysrq + REISUB key combination.
View 5 Replies
View Related
Dec 3, 2015
Creating a separate /tmp partition manually during install prevents a clean shutdown.
Setup: Debian 8 minimal server configuration (SSH only) using net install as virtual machine on Windows Server 2012 R2 Hyper-V (Gen 2).
1024 MB RAM, 20 GB VHDX, and 1 Processor, EFI boot
Packages installed: openssh-server, sudo, unattended-upgrades, bsd-mailx postfix
Application: IPv6 gateway using 6in4 tunnel
Symptoms: When shutting down the operating system (poweroff or reboot), the message
A start job is running for Unattended-Upgrades ( xx seconds / no limit ).is displayed on the console and will persist for several minutes before eventually timing out and shutting down.I've tried several different configurations. Any configuration that creates /tmp automatically (whole disk with single partition, or disk with separate /home, /var, and /tmp partitions) works fine and shuts down promptly. When I partition the disk manually (512 MB EFI Boot, 17 GB /, 3 GB /var, 512 MB /tmp, and 512+ swap) the problem occurs. I've narrowed it down to just the /tmp partition by testing and comparing various configurations (including/excluding partitions, placing partitions on a separate disk, changing the partition sizes, matching against automatic configurations, etc.).
I have also compared the /etc/fstab and /etc/default/tmpfs configuration file between working and non-working systems and cannot see any meaningful difference.
View 0 Replies
View Related
May 31, 2010
I installed selinux and it caused ubuntu to stall/hang on shutdown, so I got rid of it, and it is still hanging. The splash stops at the third/fourth progress dot and just sits there.
View 1 Replies
View Related
Feb 27, 2009
the (almost) last message I see is"shutting down (remotefs) network nterfaceIf I then press Ctrl-Alt-Del the system goes on until:shutting down (localfs)network interface: eth0... and that's it - further go on possible,by any means.No complete shutdown possible.Until present I did at least get nojournal replay at the next startup
View 9 Replies
View Related
Jun 11, 2010
Ubuntu hangs on splash screen when shutting down and restarting after creating startup scrip.
I created the upstart script using the following method:
sudo gedit /etc/init.d/local.autostart "Edit local.autostart"
sudo chmod +x /etc/init.d/local.autostart And sudo update-rc.d local.autostart defaults 80. After this ubuntu hangs on the splash screen during shut down. If I remove the script by doing: sudo update-rc.d -f local.autostart remove
Then ubuntu can restart once again.
View 7 Replies
View Related
Jul 25, 2010
I just recently installed ubuntu 10.04 and it works great! I got it to work with both of my printers, scanner, and zune! The problem is occasionally when I boot up ubuntu it stops and displays "[drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?)"
View 2 Replies
View Related
Sep 19, 2010
When I'm shutting it down it hangs on the splash screen. The screen then fills with white in a weird way; it's hard to describe but it's like watching film become exposed to air. It almost looks like there's something wrong with the screen but there isn't. I have no idea why it could be doing this.
My laptop is a Toshiba Satellite A305D.
View 2 Replies
View Related
Feb 10, 2011
Shutting down sometimes hangs during the purple ubuntu shutdown screen. This especially happens when shutting down via ssh.
For example, sometimes I need to leave and wait for some operations to finish. Later, I ssh into the machine to sudo shutdown now. It tells me it's going down and disconnects me and all, but when I get home the shutdown screen is still on with a few white and red dots (those that are animated during shutdown).
When this happens, I do a slow Alt + SysRQ + R, E, I, S and U before I manually power down in order to keep my file systems happy.
Also, shutting down sometimes leaves me with a black unresponsive desktop. I can login through ssh and do a /etc/init.d/gdm restart and my desktop (or login screen) comes back.
I am running Ubuntu 10.04 LTS x64. I was running X86 before and I had the same issues with the shutdown hang. After a clean install of x64 it took a few weeks before I got the same symptoms again. The black desktop thing is new with x64.
what to do the next time this happens in order to find out why it's happening?
View 4 Replies
View Related
Apr 3, 2011
I'm not 100% certain, but I'm fairly sure that fglrx is preventing clean shut downsHardware is an ASUS E-35M1-I Deluxe, so fairly new, and I'm running Ubuntu natty.I couldn't find anything damning in the logs under /var/log, so I'm not sure where I can look to find the specific errors. All I know is that when I'm running with fglrx shutdown takes forever, as if it's waiting for the X server, and it just never shuts down cleanly, but when I run with the standard radeon driver everything shuts down quickly and cleanly.Sometimes when I tried to execute a "service slim stop" or "service gdm stop", the whole system would hang, and needed a hard reset.
View 7 Replies
View Related
Feb 3, 2010
Linux distro:
Mandriva One 2010.0-KDE
kernel(after update):-> 2.6.31.12-desktop586-1mnb
Pentium 4 3.4GHz
Used to boot to kenrel 2.6.31.6 for the past 2 months updating my system whenever i was asked to-NO PROBLEMS so far(till yesterday in fact)Mandriva yesterday, offered a list of system updates including the kernel 2.6.31.12 and the respective Nvidia drivers.Boot to that kernel computer reacted as usual and everything seemed to run properly. HOWEVER,when i tried to shutdown the system everything powered off(hdd-keyboard) except the CPU(and the power supplier).I restart(manually) the system boot in and try to reboot it-NO Problem-logout NO Problem but FAILED TO SHUTDOWN PROPERLY AGAIN.
View 7 Replies
View Related
Feb 20, 2010
I have just made a clean installation of FC12. The only change I have made for now is to disable the NetworkManager and set a static ip address. My problem is that when I click "shutdown" it doesn't complete the shutdown and hangs due to some kind of kernel error. Then I have to use the power-switch to shut it down. It doesn't happen every time, but it happens often (every 3rd shutdown or so).
I get this error-messages on the screen:
Code:
Unmounting file systems:[OK]
Halting system...
--------[ cut here ]-----------
kernel BUG at kernel/time/clockevents.c:262!
invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/mmodule/ip6_tables/refcnt
Modules linked in: {long list}
Pid: 1809, comm: hal Not tainted (2.6.31.12-174.2.22.fc12.i686 #1) OptiPlex GX270
This is exactly whats described here: [URL].
View 2 Replies
View Related
Mar 29, 2010
recently a weird error occured on my Ubuntu Karmic. When I shutdown (or reboot) the os, the flashing logo shows and then the whole process hangs with last few lines of shutdown log displayed. The last line then says this error:
Code:
init: rc main process (pid) killed by TERM signal where pid is actual pid of that process.
Then I have to shutdown the computer manually with hardware button. It's no big deal, it's just not that comfortable and I'd really like to know why this is happening.
View 1 Replies
View Related
May 20, 2011
Completely new Gateway dx4850-45, installed 11.04 64 bit.
Symptoms:
- Both restart and shutdown hangs, have to hold the power button to kill it.
- Once the screen saver kicks in it hangs,
- Try to reinstall using 11.04 and 9.10 and they both hang. On the screen there is briefly some ascii text talking about "... found 2 index files ..."
View 2 Replies
View Related
Jun 15, 2010
12.2 is up to date and am running the Firefox from Slackbuilds. There was an update to FF a few months ago. Since then FF "hangs" when I close it out. It does seem to shut down better from the home page instead of whatever site I happen to be on at the time of shutting down. I do have a few addons to FF but they were there before the update with no issues. The addons are Gmarks [disabled], Rankchecker, Scribefire, SEO for FF [disabled], SEO Toolbar, Weatherbug and Web Developer. I haven't done any "fixes" so I'm fairly certain I didn't create my own problem.
View 4 Replies
View Related
Dec 30, 2009
I have a SMB share being mounted during boot using a /etc/fstab entry.All that seems to work fine, but on shutdown or reboot I found that the system hangs for a variable period trying to unmount the share. It appears from the log that the unmount is happening after the network connections are closed.Is there someway around this, or is there some other way I should be mounting the share so that it is closes successfully at restart or shutdown?
View 1 Replies
View Related
Mar 7, 2010
Last night I shut down my computer and left, since it goes automatically after I tell it to shut down. This morning, my computer was still on, with some shutdown messages like "Stopping MySQL server mysqld" and such.
The last line said "deactivating swap..." and didn't appear to be doing anything. code...
View 6 Replies
View Related
Jan 20, 2011
About 1 shutdown in 3, my PC just hangs and doesn't actually power off. If I hit "escape" early enough during this, the last output is "iptables unloading modules", and nothing else changes. Wait long enough and hitting escape will not do anything, but still computer does not shutdown
View 5 Replies
View Related
Jan 3, 2010
i'm having a problem shutingdown my ubuntu 9.10. When I shutdown, it hangs after "Deactivating swap". It doesn't say fail or ok, just hangs there. Keyboard is still working.
View 1 Replies
View Related
Sep 3, 2011
i have fresh installed debian wheezy xfce4, and using slim to start it but i can't get reboot, shutdown and thunar can't open flash and others volumes. i using .xinitrc (exec ck-launch-session startxfce4)
View 3 Replies
View Related
Dec 10, 2010
I have installed a cluster computer with 10 nodes . The manufacturer is HP . All nodes and the master node have redhat enterprise linux installed in them . When I shutdown the nodes from the master terminal using "shutdown -h now" they get shutdown . But they dont get completely turned off . This issue bothers me when the power supply is given , all nodes boot up simultaneously generating a huge heat .
Thing to note : When we shutdown our PC they get completely turned off . When the power supply is given , a press on the Power On button is required to boot the system. But , why does it not happpen in the case of cluster? Is there any other way of completely turning off the nodes from the master terminal ?
View 1 Replies
View Related
Jan 17, 2010
I searched the forum for this, but didn't find anything about it: when I try to shut down the computer, it returns to the login screen. When I log back in and shutdown again, it shuts down.Squeeze works perfectly, but this is the only thing that doesn't work like it should. Is this a setting I should change somewhere?
View 6 Replies
View Related
Oct 17, 2010
On my squeeze installation, when I shutdown my computer, there is an error message saying that "...cannot shutdown mysqld". I ignored it and there does not seem to have any ill effect.
edit: here is the exact message: "Stopping msql-server: mysqld failed"
View 2 Replies
View Related
Feb 5, 2011
Recently I installed vncserver (tigervnc) on my desktop. Ever since my computer refuses to shutdown normally. At shutdown the following message pops up: Quote: System policy prevents stopping the system when other users are logged in Then I have to enter the root password to shutdown. If I stop vncserver before, the computer shuts down normally.
[Code]....
View 2 Replies
View Related
Jun 30, 2010
when my pc boots and shuts down my monitor goes into 'input out of range' mode for a bit between the gui and the text only phases of boot/shutdown.is there a way to fix this? or where to start troubleshooting?also, when it shuts down it hangs after coming back to the text only part
View 4 Replies
View Related
Mar 9, 2011
Is it possible to shutdown or to halt by means of cron ? this crontab entry is doing nothing: 45 3 * * * halt
View 2 Replies
View Related
Aug 19, 2011
I search many hours on the web for wipe my ram in a secure way and i find nothing good/secure/work exept URL... and i think it's the best solution for wipe RAM at shutdown!Im a newbie user and i want to implement this solution on my debian system at shutdown, i think its very easy because TAILS is based on debian! Does someone can put the procedures for get that on a debian box please?
View 8 Replies
View Related
Aug 5, 2010
I just installed debian unstable with kde 4.4.5 on a new hp desktop. Just about everything is working fine except when I try to logout or shutdown by right clicking on the desktop. No matter which option I choose--logout, shutdown, or restart--the screen goes black and nothing happens. I'm forced to do a hard shutdown or use alt-SysRq-B to reboot. I can reboot or shutdown using the command line when logged into kde.
View 4 Replies
View Related
Aug 16, 2010
Having issues starting my apache up again, This is what i get
Code: Starting web server: apache2[Sun Aug 15 19:19:01 2010] [warn] module auth_basic_module is already loaded, skipping
[Sun Aug 15 19:19:01 2010] [warn] module authn_file_module is already loaded, skipping
[Sun Aug 15 19:19:01 2010] [warn] module php5_module is already loaded, skipping
[Sun Aug 15 19:19:01 2010] [warn] module alias_module is already loaded, skipping
[Sun Aug 15 19:19:01 2010] [warn] module authz_groupfile_module is already loaded, skipping
[Code].....
View 1 Replies
View Related
Nov 27, 2010
I want to be able to run fsck at, or near, shutdown at the end of the day, and not have to wait for it when booting (important now that I have 1TB drives!). As far as I can tell, the only way to arrange to run fsck on the root partition is if it is unmounted and I believe that only occurs at reboot time.
So, I thought of using the /forcefsck file that, when exists, will force file system check upon the next boot. So I envision having a script that touches that file, or issues the right shutdown command, then lets the system reboot and thus forcing a fsck of the root partition. However, I then want the system to turn right around and then shutdown, so that when I cold boot the system in the morning, I won't see the fsck run at that time, ever.
So I think this boils down to being able to run a one-time init script or something like that. Is there an established way or idiom for running an init script only one time? I know I can create a non-standard init-script that looks for a special file like is done for /forcefsck, and only shutdown if that file is seen, but surely someone else has already come up with a canned solution/init-script to what I want to do.
View 5 Replies
View Related
