Ubuntu :: 10.04 Hangs On Shutdown?
May 31, 2010I installed selinux and it caused ubuntu to stall/hang on shutdown, so I got rid of it, and it is still hanging. The splash stops at the third/fourth progress dot and just sits there.
View 1 RepliesI installed selinux and it caused ubuntu to stall/hang on shutdown, so I got rid of it, and it is still hanging. The splash stops at the third/fourth progress dot and just sits there.
View 1 RepliesUbuntu hangs on splash screen when shutting down and restarting after creating startup scrip.
I created the upstart script using the following method:
sudo gedit /etc/init.d/local.autostart "Edit local.autostart"
sudo chmod +x /etc/init.d/local.autostart And sudo update-rc.d local.autostart defaults 80. After this ubuntu hangs on the splash screen during shut down. If I remove the script by doing: sudo update-rc.d -f local.autostart remove
Then ubuntu can restart once again.
I just recently installed ubuntu 10.04 and it works great! I got it to work with both of my printers, scanner, and zune! The problem is occasionally when I boot up ubuntu it stops and displays "[drm:rs400_gart_adjust_size] *ERROR* Forcing to 32M GART size (because of ASIC bug ?)"
View 2 Replies View RelatedWhen I'm shutting it down it hangs on the splash screen. The screen then fills with white in a weird way; it's hard to describe but it's like watching film become exposed to air. It almost looks like there's something wrong with the screen but there isn't. I have no idea why it could be doing this.
My laptop is a Toshiba Satellite A305D.
Shutting down sometimes hangs during the purple ubuntu shutdown screen. This especially happens when shutting down via ssh.
For example, sometimes I need to leave and wait for some operations to finish. Later, I ssh into the machine to sudo shutdown now. It tells me it's going down and disconnects me and all, but when I get home the shutdown screen is still on with a few white and red dots (those that are animated during shutdown).
When this happens, I do a slow Alt + SysRQ + R, E, I, S and U before I manually power down in order to keep my file systems happy.
Also, shutting down sometimes leaves me with a black unresponsive desktop. I can login through ssh and do a /etc/init.d/gdm restart and my desktop (or login screen) comes back.
I am running Ubuntu 10.04 LTS x64. I was running X86 before and I had the same issues with the shutdown hang. After a clean install of x64 it took a few weeks before I got the same symptoms again. The black desktop thing is new with x64.
what to do the next time this happens in order to find out why it's happening?
I'm not 100% certain, but I'm fairly sure that fglrx is preventing clean shut downsHardware is an ASUS E-35M1-I Deluxe, so fairly new, and I'm running Ubuntu natty.I couldn't find anything damning in the logs under /var/log, so I'm not sure where I can look to find the specific errors. All I know is that when I'm running with fglrx shutdown takes forever, as if it's waiting for the X server, and it just never shuts down cleanly, but when I run with the standard radeon driver everything shuts down quickly and cleanly.Sometimes when I tried to execute a "service slim stop" or "service gdm stop", the whole system would hang, and needed a hard reset.
View 7 Replies View RelatedWorking with 8.2 DVD installation for about 5 days, Debian newbie. As subject says, screen goes dark and hangs indefinitely.
This guide: [URL]... similar to others I've read. I've done everything there to section: Status and Logs of Services, and that's as far as I've gotten.
Guide suggested posting some files, so here they are:
Code: Select all#
# Grub.cfg
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#
[Code] ....
recently a weird error occured on my Ubuntu Karmic. When I shutdown (or reboot) the os, the flashing logo shows and then the whole process hangs with last few lines of shutdown log displayed. The last line then says this error:
Code:
init: rc main process (pid) killed by TERM signal where pid is actual pid of that process.
Then I have to shutdown the computer manually with hardware button. It's no big deal, it's just not that comfortable and I'd really like to know why this is happening.
Completely new Gateway dx4850-45, installed 11.04 64 bit.
Symptoms:
- Both restart and shutdown hangs, have to hold the power button to kill it.
- Once the screen saver kicks in it hangs,
- Try to reinstall using 11.04 and 9.10 and they both hang. On the screen there is briefly some ascii text talking about "... found 2 index files ..."
the (almost) last message I see is"shutting down (remotefs) network nterfaceIf I then press Ctrl-Alt-Del the system goes on until:shutting down (localfs)network interface: eth0... and that's it - further go on possible,by any means.No complete shutdown possible.Until present I did at least get nojournal replay at the next startup
View 9 Replies View RelatedLinux distro:
Mandriva One 2010.0-KDE
kernel(after update):-> 2.6.31.12-desktop586-1mnb
Pentium 4 3.4GHz
Used to boot to kenrel 2.6.31.6 for the past 2 months updating my system whenever i was asked to-NO PROBLEMS so far(till yesterday in fact)Mandriva yesterday, offered a list of system updates including the kernel 2.6.31.12 and the respective Nvidia drivers.Boot to that kernel computer reacted as usual and everything seemed to run properly. HOWEVER,when i tried to shutdown the system everything powered off(hdd-keyboard) except the CPU(and the power supplier).I restart(manually) the system boot in and try to reboot it-NO Problem-logout NO Problem but FAILED TO SHUTDOWN PROPERLY AGAIN.
I'm using Debian Sid xfce on my lenovo laptop. When i try to shutdown, the screen always stays on (the fans turn off). It says "reached target shutdown", then this happens: [URL] .... and then it hangs. I have to press the power button to shut it down. (I have the same problem with reboot). I had the same issues with Jessie.
Things i tried so far and didn't work:
Code: Select allshutdown -h now
shutdown -p now
halt
poweroff
systemctl poweroff
init 0
I edited /etc/default/grub and added the following options at "GRUB_CMDLINE_LINUX_DEFAULT":
acpi=force, acpi=off*, acpi=noirq
*acpi=off: shutdown (not reboot) worked a few times but i didn't have wifi and power manager didn't seem to work
none of them worked..
I have no energy or wake up options at my BIOS.
I found out that i can normally reboot with the Alt + sysrq + REISUB key combination.
I have just made a clean installation of FC12. The only change I have made for now is to disable the NetworkManager and set a static ip address. My problem is that when I click "shutdown" it doesn't complete the shutdown and hangs due to some kind of kernel error. Then I have to use the power-switch to shut it down. It doesn't happen every time, but it happens often (every 3rd shutdown or so).
I get this error-messages on the screen:
Code:
Unmounting file systems:[OK]
Halting system...
--------[ cut here ]-----------
kernel BUG at kernel/time/clockevents.c:262!
invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/mmodule/ip6_tables/refcnt
Modules linked in: {long list}
Pid: 1809, comm: hal Not tainted (2.6.31.12-174.2.22.fc12.i686 #1) OptiPlex GX270
This is exactly whats described here: [URL].
12.2 is up to date and am running the Firefox from Slackbuilds. There was an update to FF a few months ago. Since then FF "hangs" when I close it out. It does seem to shut down better from the home page instead of whatever site I happen to be on at the time of shutting down. I do have a few addons to FF but they were there before the update with no issues. The addons are Gmarks [disabled], Rankchecker, Scribefire, SEO for FF [disabled], SEO Toolbar, Weatherbug and Web Developer. I haven't done any "fixes" so I'm fairly certain I didn't create my own problem.
View 4 Replies View RelatedI have a SMB share being mounted during boot using a /etc/fstab entry.All that seems to work fine, but on shutdown or reboot I found that the system hangs for a variable period trying to unmount the share. It appears from the log that the unmount is happening after the network connections are closed.Is there someway around this, or is there some other way I should be mounting the share so that it is closes successfully at restart or shutdown?
View 1 Replies View RelatedCreating a separate /tmp partition manually during install prevents a clean shutdown.
Setup: Debian 8 minimal server configuration (SSH only) using net install as virtual machine on Windows Server 2012 R2 Hyper-V (Gen 2).
1024 MB RAM, 20 GB VHDX, and 1 Processor, EFI boot
Packages installed: openssh-server, sudo, unattended-upgrades, bsd-mailx postfix
Application: IPv6 gateway using 6in4 tunnel
Symptoms: When shutting down the operating system (poweroff or reboot), the message
A start job is running for Unattended-Upgrades ( xx seconds / no limit ).is displayed on the console and will persist for several minutes before eventually timing out and shutting down.I've tried several different configurations. Any configuration that creates /tmp automatically (whole disk with single partition, or disk with separate /home, /var, and /tmp partitions) works fine and shuts down promptly. When I partition the disk manually (512 MB EFI Boot, 17 GB /, 3 GB /var, 512 MB /tmp, and 512+ swap) the problem occurs. I've narrowed it down to just the /tmp partition by testing and comparing various configurations (including/excluding partitions, placing partitions on a separate disk, changing the partition sizes, matching against automatic configurations, etc.).
I have also compared the /etc/fstab and /etc/default/tmpfs configuration file between working and non-working systems and cannot see any meaningful difference.
Last night I shut down my computer and left, since it goes automatically after I tell it to shut down. This morning, my computer was still on, with some shutdown messages like "Stopping MySQL server mysqld" and such.
The last line said "deactivating swap..." and didn't appear to be doing anything. code...
i'm having a problem shutingdown my ubuntu 9.10. When I shutdown, it hangs after "Deactivating swap". It doesn't say fail or ok, just hangs there. Keyboard is still working.
View 1 Replies View RelatedAbout 1 shutdown in 3, my PC just hangs and doesn't actually power off. If I hit "escape" early enough during this, the last output is "iptables unloading modules", and nothing else changes. Wait long enough and hitting escape will not do anything, but still computer does not shutdown
View 5 Replies View RelatedI have installed a cluster computer with 10 nodes . The manufacturer is HP . All nodes and the master node have redhat enterprise linux installed in them . When I shutdown the nodes from the master terminal using "shutdown -h now" they get shutdown . But they dont get completely turned off . This issue bothers me when the power supply is given , all nodes boot up simultaneously generating a huge heat .
Thing to note : When we shutdown our PC they get completely turned off . When the power supply is given , a press on the Power On button is required to boot the system. But , why does it not happpen in the case of cluster? Is there any other way of completely turning off the nodes from the master terminal ?
when my pc boots and shuts down my monitor goes into 'input out of range' mode for a bit between the gui and the text only phases of boot/shutdown.is there a way to fix this? or where to start troubleshooting?also, when it shuts down it hangs after coming back to the text only part
View 4 Replies View RelatedRecently I installed vncserver (tigervnc) on my desktop. Ever since my computer refuses to shutdown normally. At shutdown the following message pops up: Quote: System policy prevents stopping the system when other users are logged in Then I have to enter the root password to shutdown. If I stop vncserver before, the computer shuts down normally.
[Code]....
I cant shutdown without running sudo shutdown. When I try to use the default gnome shut down it takes me back to the logon screen. Fresh install today and I've had the same problem on other installs.
View 9 Replies View RelatedUbuntu will randomly pop up the shutdown menu and then shutdown.It seems to happen when im in firefox and typing and it has been difficult to replicate. I dont think it is a temp issue since watch sensors shows temmp of 40-50C. Someimtes it happens every minute someimtes i can go 10min without it happening.
Dell Inspiron 1525
ubuntu 10.04 (only os on system)
looking for a command that shutdown/reboot my ubuntu just same as process that happened when I press shutdown buttonIn fact I need to close all programs that are running and then PC shutdown (that happened when I press shutdown button).
View 9 Replies View RelatedI am trying to install Ubuntu 10.10 x64 on a HP Pavilion p6565uk.
My PC is x64 compatible, although ubuntu will not install.
I don't get to any gui, it says ubuntu will continue install in 5 seconds, at 0, nothing happens. The CPU light is flashing, but nothing happens.
After about 10 minutes, it reboots, but when the HP splash screen shows (Before the boot selection screen) it just hangs. I have to do a hard shutdown to boot back up.
I am using wubi for install.
I cannot locate shutdown log for Linux shutdown to check various activities carried out during shutdown. I can view Startup Log which is availble on console>Applications>System Tools>System Logs.
I have included Shutdown/Startup in dbora, so that Oracle 10gR2 Shutdown/Startup will be automated during OS Shutdown/Startup.
I want to check Shutdown log because Oracle Shutdown was not running, as from $ORACLE_HOME/shutdown.log contains no entries, where as startup log contains latest startup details.
That means here 2 issues are there. One, I want to locate OS Shutdown Log and the other being Why Oracle Shutdown not getting executed.
I did a live upgrade from 11.3 KDE and observe a following issue.When I press the shutdown button on the laptop it initiates the shutdown and shuts down fine but after a significant delay of time (something like 30 seconds). When I click the shutdown button in KDE it initiates the shutdown instantly. This was not the case in 11.3 where the shutdown worked the same regardless of the method that triggered it
View 6 Replies View RelatedI'm trying to reboot the server (shutdown -r now).But it seems like nothing happened.
When I try "shutdown -c", the system prompts "shutdown: cannot find pid of running shutdown."
For a given user on a given networked system, starting KDE (slackware 13.1 stock) hangs during the startup. CNTL+ALT+Fx gets out, and KDE / X can be shutdown with a CNTL+C, however, afterwards doing a df hangs bash.My guess is that there is something IO oriented, as top shows a load of 9+.
There is 5% iowait according to iostat.