I installed mysqld with yum then yum quit working with this error:http://yum.baseurl.org/ticket/70 when mysqld is stopped yum works again. what does a running instance of mysqld have in common with a python yum package manager?
rpm -qa rpm* python* yum* mysql* | sort
mysql-5.0.45-7.el5
mysql-devel-5.0.45-7.el5
mysql-server-5.0.45-7.el5
[Code]...
After the upgrade from 8.10 to 9.04, all was well. But after the upgrade from 9.04 to 9.10, I lost the MySQL server. Now, I recall during the upgrade, I was asked if I wanted to keep the existing my.cnf file or replace it with a newer one. I did as suggested and kept the original as I had edited it before. The same question was asked with a couple other config files. I kept the original in each case. After the first step, I checked the server was running and the websites were up, all was well. After the update to 9.10, when I checked the server, I get the following error:
Code: error: 'Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)' Check that mysqld is running and that the socket: '/var/run/mysqld/mysqld.sock' exists! Can anyone point me in the right direction to getting this resolved?
I need some help.Trying to set up bugzilla on my VM.After setting up the IP to use static i could log on to the url its not even loading up from command line its issueing an error.when i try to log on to mysql
bugzilla:~# mysql -u root mysql] ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
I'm the lead Dev of GnackTrack and we're having issues with running MySQL on the LiveDVD.Once installed everything works fine, mysql can be connected to but when using the liveDVD we get the following error:
Code:
root@root:~# mysql
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
Contents of /etc/mysql/my.cf point to /var/run/mysqld/mysqld.sock but because this is a liveDVD the actual file is located in:
/rofs/var/run/mysqld/mysqld.sock
[code].....
I have Centos 5.1 and im a total newbie. I have managed to get it running with Apache and PHP but after I install mysql it fails to start with the above error. I have removed it as well using YUM and reinstalled it but it still will not start.
View 4 Replies View RelatedI'm wondering how python's thread & fork support is compared to perl? Which one is best option among Perl and Python
View 1 Replies View Relatedinstalling mysql server manually. i have successfully installed mysql server but when i am try to create database, it shows error like this
ERROR 2002 (HY000): Can't connect to local MySql server through socket '/var/run/mysqld/mysqld.sock' (2)
** mysqld is not available in /var/run and error log file is also not available in /var/log **
Since /etc/rc2.d/S19mysql does not exists anymore, and then init.d/mysql uses /sbin/start, I am unable to use mysql server anymore: me@mycomputer~#start mysql [ret] ...... for hours this command never returns so that ^C aborts...
me@mycomputer~#ps axw |grep mysql ( no results, no mysql!!! ) me@mycomputer~#stop mysql [ret] no returns either!!! This upstart [start|stop] thing seems a total failure for mysql!!!
I've installed the CentOS 5.1 from a CD only yesterday and everything is working fine except Mysql that came from the CD distribution. I have detected that my system has mysql.
[root@onion /]# rpm -qa |grep mysql
mysql-5.0.22-2.1.0.1
[root@onion /]# find . -name mysql
./usr/bin/mysql
./usr/share/mysql
./usr/lib/mysql
However I'm unable to find mysqld, safe_mysqld or mysql_install_db in my filesysytem.
[Code]...
How to get list of threads of a process using C code in Linux?
View 6 Replies View RelatedThis is a client server issue where the server creates a new thread for listening to a new client, now when the thread starts execution and during its execution the server needs to pass it an object of some X class, how's that to be done?
View 4 Replies View Relatedi have successfully installed mysql server but when i am try to create database, it shows error like this
ERROR 2002 (HY000): Can't connect to local MySql server through socket '/var/run/mysqld/mysqld.sock' (2)
** mysqld is not available in /var/run and error log file is also not available in /var/log **
I have a virtual machine (VirtualBox) with Ubuntu 9.10 installed, I'm trying to install MySql community editor using the linux-generic package (the tar package), I followed all the procedure but I had a problem with the next line of code:
shell> scripts/mysql_install_db --user=mysql
I don't understand a lot about the command line, but I think this line of code is used to create the basic tables of the database (users and so on). the problem I got with this line of code is:
FATAL ERROR: Could not find mysqld
I googled it and after a while I found this blog:
azimbabu.blogspot.com/2009/07/mysql-5136-in-ubuntu-904-fatal-error.html
The blog says that the problem is a default instalation of SQL, and the solution is replace the file my.cnf in the location /etc/mysql for other file that comes with the package.
I didn't replace the file my.cnf, I only changed the name and it woked perfectly, and this is the problem, I don't understand why it worked.
Any one knows why this file is so important?What could happen if I delete this file?what is the purpose of the package mysql-common un Ubuntu?
In short our required is that we are creating a share library which can be loaded by a process and that share library analysis the process which load it. Since share library is in address space of the process so I need to find out how many threads created by the process and what is status of their stack trace etc.
So I am looking for a way to get list of threads in running process.
yum dependency problem please? I am running Centos 5.5. I need to install python-devel, but when I do so I get:
[Code]....
I have recently installed MySQL Server on my CentOS box.
CentOS 5 MySQL 5.0.45 (installed using 'yum install mysql-server') I can start the daemon without error by issueing the following command: service mysqld start
The problem is that I want to use a number of the command line options available to mysqld, such as --verbose and When I issue '/etc/init.d/mysqld --verbose --help' I get the following output:
[Code]...
We have been struggling with a problem with the mysql-server package. This might be in the wrong category because our problems are with it on x86_64. Where the problem happens variables that should populate from the my.cnf don't, on other servers, they do, the my.cnf files are identical except for the server-id
The problem occurs on some of our machines but not others. All are using the mysql-server-5.0.45-7.el5.x86_64 The ones that work, when you connect with a client respond with server version 5.0.45-log source distribution The ones that don't work respond with 5.0.45 source distribution
It's unclear what the differences are between the two source versions and how we wind up with two different versions. One thing that might be involved, the mysql package is installed with both the i386 and x86_64
I'm running Ubuntu 8.04.4 LTS to host a moodle server in a school.. moodle is running OK - but I'm having problems with MySql Any mysql command generates:
unknown variable 'pid-file=/var/run/mysqld/mysqld.pid'
I've taken a look in unknown variable 'pid-file=/var/run/mysqld/ and there is no mysqld.pid file I have followed these instructions that I found elsewhere:
If there�s no mysqld.pid inside /var/run/mysqld directory, create mysqld.pid
# cd /var/run/mysqld
# touch mysqld.pid
[code]....
But after reboot the mysqld.pid file is missing again.. I can access mysql via phpmyadmin - but webmin fails with unknown variable 'pid-file=/var/run/mysqld/mysqld.pid'
I am going to use "pthread_setaffinity_np" to bind a thread to a specific core. My application has two threads. I have used mutex to assign a specific id to each thread and then bind that thread to a core different from another core. but it seems that the os assigns both thread to one core.What should I do to bind each thread to a specific core?
View 4 Replies View RelatedHow can I upgrade python-2.4.3 to python-2.5?
View 1 Replies View RelatedCan anyone tell me what command can be used so that the Linux Centos Server starts mysqld, httpd and ftpd services at boot time automatically?
View 2 Replies View RelatedI receive sequence of the following errors on CentOS 5.5 64bit when I want to install vmware worksatation 7I searched a lot but gain nothing Code:First this error appear:"Too many virtual machines are running."After that this error :"The maximum number of running virtual machines is 64."and at end :"Unable to change virtual machine power state: Cannot find a valid peer process to connect to"Code:Do you agree? [yes/no]: ySystem path prefix. Please note that choosing a path other than /usrmay result in missing icons, application launchers, and other desktopintegrations [/usr]: System lib directory [/usr/lib]:
Architecture-independent files [/usr/share]:
User level binaries [/usr/bin]:
Super user level binaries [/usr/sbin]:
[code]....
i got a dual-boot. both are debian. yesterday i upgraded one of them to debian-squeeze and to grub2.that installations boots just fine.but for the second i get the error message from the thread title:"render error detected"after the grub-menu.if i choose single user mode it boots and hangs waiting for the root file system.i found this results at google (which i am not allowed to post yet) but i don't understand them.
View 8 Replies View RelatedI'm running xen as installed from the CentOS Virtualization Suite and I'm having some problems. One of my VMs powers off immediately after an error during 'POST'. Is there a way to stop it from immediately powering off so I can see the error? And there's also at least one error message that appears for a split second after the vm craps out, before the gui console reports 'Guest not running'.
View 3 Replies View RelatedAfter I login to KDE I see an error dialog saying,"ESC is already running, but is not responding. To open a new windows, you must first close the existing ESC process, or restart your system."
What is ESC and what can I do to stop this error dialog from popping up right after I login?
I have installed Mysql in Ubuntu 9, for the use of roundcube database.After installing iam getting the error like this
* Stopping MySQL database server mysqld [ OK ]
* Starting MySQL database server mysqld [ OK ]
* Checking for corrupt, not cleanly closed and upgrade needing tables.
So because of this in the roundcube configuration its giving the error message that MYSQL is not installed. So Kindly give me a idea how to solve this.
i'm not the most knowlegable person but i have successfully installed mysql in the past. but now that i am attempting to install it again i'm getting this error during installation. has anyone seen this before?
mysql error: *Starting MySQL database server mysqld [fail] invoke-rc.d: initscript mysql, action "start" failed. dpkg: error processing mysql-server-5.0 (--configure): subprocess post-installation script returned error exit status 1
I need to know what version of python I am running. I am running ubuntu 10.04 and am going to be downloading wxpython but need to know what version of python I am running.In php there is a built in command phpinfo() that tells you everything you need to know about your installation of php, does python have something like this?Also, learned of python 2.7 today, I am currently learning python and am wondering if i should go ahead and upgrade or wait??
View 3 Replies View RelatedI just took a class on sql, unfortunately, it was Windows-centric, which means I have to figure out how to do stuff in Redhat by myself. By installing mysql via yum and then running pirut, I find there is an interface type program called MySQL-python-1.2.1-1.x86_64 so I installed it but I'll be danged if I can find any information on how to actually run the thing. What is the command to start MySQL-python-1.2.1-1.x86_64?
View 6 Replies View RelatedI am trying to get a list of running processes using audio (using gstreamer), just like in gnome-volume-control, under applications, but have so far been unsuccessful in finding anything in either the gtk or gstreamer library, anyone out there who can point me in the right direction?
View 1 Replies View Related
