CentOS 5 :: Setup A Server With RAID 5?
Jul 21, 2009I looking to setup a CentOS server with RAID 5 i was wondering what the best way to set it up and How with the ability to add more HDD to the RAID system later on if needed?
View 1 Replies
ADVERTISEMENT
Server :: Setup RAID 1 On CentOS 5 Server For A Zimbra Email Server
Feb 7, 2011I'm trying to setup RAID 1 on a CentOS 5 server for a zimbra email server.I get a partion schema error. Can I do this?The server is a HP Proliant ML150 G3 server with two 80GB HDD.
View 1 Replies View RelatedCentOS 5 :: Setup Software RAID On A Current Production Server?
Mar 12, 2009Is it possible to setup software RAID on a current production server.
If so how would I go about doing so?
CentOS 5 :: Mistakenly Setup RAID 0 Array On / Instead Of RAID1 During Setup - Convert Without Loss?
Dec 15, 2010So I didn't notice when I setup my CentOS 5.5 server that I left / as RAID 0 on md1. All the rest are RAID 1. Is there a way I can modify the array to RAID 1 without a risk of data loss? I'm glad I caught this before I setup any other services. I've only setup smb so far...
[root@ftpserver ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md1 16G 3.0G 13G 20% /
[code]....
CentOS 5 Hardware :: Connect A RAID Box To The Server Via LSI 8880EM2 RAID Controller
Aug 3, 2010I am trying to connect a RAID Box to the server via LSI 8880EM2 RAID controller.The raid box is FUjitsu Externus DX60 with raid 1 configured.The server is Fujitsu Primergy SX300 S5 with LSI 8880EM2 RAID card.The external raid box is being recognised by the raid controllers bios.
The server runs CentOS 5.5 64bit. I have installed the megaraid_sas driver from LSI website and MegaCLI utility but CentOS still fails to see the box.MegaCLI utility, when launched from CentOS, recognises the raid box, CentOS does not(no mapping being created in /dev).
I have also tried to create a logical RAID0 HDD on one physical HDD(as seen by MegaCLI) with MegaCLI utility in CentOS.The result was success and the new logical drive could have been used, but when restarting the server, the controllers' bios fails with an error (not surprised(one logical RAID0 on one physical HDD)) and configuration is being erased.
Has anyone tried connecting 8880EM2 controller to a raid box with raid configured on the box, running it all under CentOS and what were the results.
CentOS 5 :: Booting With Over 2TB Raid Setup?
Dec 9, 2009I'm setting up a backup server using Centos 5.3 and an Adaptec 5805 raid card and discovered that I can't use a raid setup that is over 2TB in size as the boot drive. What I eventually did was set up 2 raids on the same set of 4 drives so that I have a 200Gb 'drive' for booting and a 2.6TB 'Drive' for data. I want to keep the OS in the raid setting so I have some protection instead of having a dedicated stand alone drive for the OS. This will be for a company wide backup server and I want to minimize the possibility of drive failure for the OS as well as the Data.
I was able to install and reboot the system and everything seemed to be working but after some working on it a bit I did a reboot and wound up with a non-booting system. I can boot to the rescue mode with the install dvd and mount the original system and I even tried to reinstall the grub setup per instructions I found on the net but still I get a system that hangs up after it asks if I want to boot from the CD. If I take out the CDROM option from the boot lineup in the bios I stop at the same place minus the boot cd prompt.
I'm guessing it is something to do with one of the raid drives being over 2TB but I'm booting from a 200gb sized raid so I'm really at a loss for what to do next??
Is what I've described the correct way to handle booting up with a large raid or is there another way to reconfigure the drives as one big 2.8TB raid and use something other than grub to boot to it?
Server :: Setup The Servers In A RAID Configuration?
Apr 15, 2010I am rebuilding two microsystems servers and I need some advice to make my dreams come true.I want to setup the servers in a RAID configuration and want to install a GUI Linux application to manage a file server, manage a subnet, and host a Moodle on my subnet.I am planning to use Asus eee netbooks running Linux as my client computers. I basically need to be able to get my kids on the web and be able to have them use some open source office suite tools. No major crunching. I'll have two Macs for that.
View 3 Replies View RelatedFedora Servers :: Setup RAID On DELL Server With F10 64Bit OS?
Jan 22, 2009I have had no problem installing Fedora OS on any of my Dell servers prior to this post. Anyway, I wouldn't call this a problem but recently, we bought another DELL server with Quad Core, 4GB, etc... AND this model has 2 swappable SAS Harddrives.
I wouldn't call myself an expert but then again I am not a newbie too. However, I have never setup any RAID before and now I am forced to setup RAID1 on this server. So, in a way, I am a newbie in setting up RAID
Would someone please point me in the right direction as I have no idea what I am supposed to do to setup the RAID. FYI, I will be installing Fedora 10 64bit on this server. I would appreciate if you can start from the very beginning, ie. partitioning, formatting the harddrives during OS installation, etc..
Server :: Unable To Setup A NIS Server Setup On CentOS System
Jan 19, 2010We are trying to set up a NIS server on a CentOS system. We need to have a NIS server which can provide NIS authentication to a couple of clients. We are practically new to all this stuff.
Just googled to find some ideas about installing ypserv and ypbind and portmapper. We did all that and also started them successfully. But now the clients are not able to join to the NIS domain . The error log states "YP_DOMAIN NOT BOUND".
I guess we have not entered the /etc/yp.conf, /etc/hosts files properly. Please let us know the detailed steps to setup a NIS server .
Also, please let us know what entries should go into the different /etc/<file_names>? What is meant by HOSTNAME in the /etc/hosts file?
Is there any other files which need to be changed? Are we missing any steps?
Also to add-on, while executing the ypinit command we faced the following error:
At this point, we have to construct a list of the hosts which will run NIS servers. localhost.localdomain is in the list of NIS server hosts. Please cont inue to add the names for the other hosts, one per line. When you are done with the list, type a <control D>. next host to add: localhost.localdomain next host to add:
The current list of NIS servers looks like this:
Is this correct? [y/n: y] y
Error running Makefile.
Fedora Installation :: Install F13 On A Server That Has A 2-disk RAID Setup In The BIOS?
Jul 8, 2010I'm attempting to install F13 on a server that has a 2-disk RAID setup in the BIOS. When I get to the screen where I select what drive to install on, there are no drives listed. The hard drives were completely formatted before starting the 13 installation. Do I need to put something on them before Fedora will install?
View 3 Replies View RelatedUbuntu Servers :: 9.10 Server/Raid 10 Setup - HDD - Not Recognizing The Full Capacity Of The Drives
Mar 12, 2010I have a total of 4 hdd's, 500gb 7.2rpm that I would like mirrored using raid 10. As you can see from the image, ubuntu 9.10 server isn't recognizing the full 2tb's. In fact, I'm not even sure about the configuration as I was thinking the HDD's would come up as four 500gb hdds. Instead I have the configuration above set and ready for Ubuntu to be installed on.
1. Is this typical of a server pre-configured from Dell(perc6 raid controller.
2.Why is ubuntu not recognizing the full capacity of the drives especially when it's a server install?
Red Hat / Fedora :: Format For Server & RAID Setup For Multi Platform Read/write/access?
Jun 23, 2011I'm looking to set up a server with attached mass storage device and tape autoloader to run linux. It's set up under Windows at the moment. Goal is to have users, connecting from individual workstations and laptops, backup their data to the linux server. On their personal machine, some users run linux, some MacOS, some Windows. I plan to set up the 5 500 GB drives as RAID5. I understand that if setting up as software raid the format is "physical volume for RAID". Under this setup, will Windows users be able to read/write and function as expected? I can't assume only linux user access.
View 3 Replies View RelatedGeneral :: Ubuntu 10.04 - Cannot Setup GRUB On RAID 0 Setup Disks
Jun 4, 2010I've been all afternoon trying to install Ubuntu Lucid on my fakeRAID 0 configured (2) HDDs and am unable to set GRUB up. The fake RAID setup is provided by Intel Matrix Storage Manager, it is correctly enabled and the BIOS is also correctly set up -- in fact, I've managed to install Windows 7 with no significant hitch. After struggling with partioning the drives (had to follow advice I found on a very helpful guide online [0]), creating the filesystems AND getting Ubuntu's installer to actually do what it is supposed to do, I now cannot seem to set GRUB up. My system, as it stands, is unbootable at all; via live CD only.
This is how the RAID0 dev is partitioned:
Code:
# fdisk -l /dev/mapper/isw_ecdeiihbfi_Volume0
Disk /dev/mapper/isw_ecdeiihbfi_Volume0: 1000.2 GB, 1000210694144 bytes
255 heads, 63 sectors/track, 121602 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 131072 bytes / 262144 bytes
Disk identifier: 0x6634b2b5 .....
Server :: CentOS 5.3 - How To Configure RAID 1
Dec 28, 2010I have centos 5.3. I have two h/d 1st h/d used as primary and backup of reqd things of first h/d is copied into 2nd h/d. I want to configure mirroring in this server how to configure this, raid 1 is ok or not.
View 1 Replies View RelatedCentOS 5 :: Setup The Centos Directory Server Without An Internet Connection?
Apr 20, 2010Is there any way to setup the Centos Directory Server without an internet connection?? i tried using the command: yum install centos-ds
but this just tries to connect to the internet to to download the packages. Is there a site where i can find the package so that i can copy it to my server and install it or is there some other way to do this?
Server :: Create Nested Raid In Centos?
Jan 21, 2010We can create normal raid levels in centos using mdadm, but how can we create nested raid levels ( example raid 1+0 Raid 0+1).
View 2 Replies View RelatedCentOS 5 Server :: Possible To Create RAID SW On Working System
Oct 5, 2009I'm working in a little company and 2 weeks ago one of our server had a hard disk failure (yes it was a seagate 11) and after passed two days without sleep trying to recover everything (and we did it!!) we took the decision now to use in some of our server a raid sw, so if one HD fail we can continue with our system without losing nothing. Yes I know normally you have to take all the precautions before so this things never happen, but you know I thing if it never arrives you, you always think than you're lucky and it's never going to happen to you but one day you discover reality.
So now this server is working with a Centos and the default HD partitions one boot partition and the LVM. I'm reading everything I'm finding about raid sw and lvm but I don't find if it's possible to create now with the system working a raid sw without having to reinstall all the system. Is it possible to do it ? If not what are my options to make a system backup before reinstalling everything?
CentOS 5 Hardware :: Mounting RAID Array On Samba Server?
Jun 23, 2009I need to mount my raid array on CentOS 5.2 samba server.
Here are my hardware specs:
Motherboard: Tyan S2510 LE dual PIII
CPU's: Intel PIII 850ghz socket 370
Memory: 4 gig Crucial 133 ECC SDRAM
OS: 2 x'x IBM Travelstar 6.4 gig 2.5 hard drives, (low heat/noise)
Storage: 4 x's Seagate 500 gig IDE 7200 rpm
RAID controller: 3Ware 7500-12 controller, (RAID 5) (66 mhz PCI bus)
NIC: 3COM 3C996B-T gigabit NIC, (66 mhz PCI bus)
I have the 2 IBM's set as RAID 1, (mirror) and the 4 Seagates as RAID 5, (1.5 TB) I have installed the OS with minor problems, (motherboard doesn't like the 2.6.18-128.1.14.el5 kernel, removed it from my grub.conf).
My problem is mounting the RAID array. I have done the following:
formatted with fdisk;
fdisk /dev/sdb
Then formatted with the following command;
mkfs.ext3 -m 0 /dev/sdb
The hard drive was formatted with the ext3 files system, but I have mounted it as an ext2 file system as I don't want 'journaling' to occur. I then edited my /ect/fstab like this: .....
Then: mount -a
When I go into my "home" directory and type ls, I get the following:
[root@hydra home]# ls -l
total 24
drwx------ 2 zog zog 4096 Jun 23 15:50 zog
lrwxrwxrwx 1 root root 6 Jun 23 15:46 home -> /home/
drwxrwxrwx 2 root root 16384 Jun 23 15:34 lost+found
drwxr-xr-x 2 root root 4096 Jun 23 17:18 tmp
Why my home directory is showing under home?
CentOS 5 Server :: Random Auto Rebuild Of Software Raid ?
Jan 16, 2010I have set up a software raid 5 and a software raid 1 on the same 3 disks.
But my problem is, every couple of days the software raid starts automatically resyncing. This resync is always succesful.
I do not know why this happens, any ideas to troubleshoot this further? I can not see an error in /var/log/messages
CentOS 5 :: Remove The Raid 1 Arrays On Server And Use Standalone Drive?
Mar 30, 2010i want to remove the raid 1 arrays on our server centos and use standalone drive
View 3 Replies View RelatedCentOS 5 Server :: Soft-Raid Didn't Start After Boot?
Apr 22, 2010I've a database-server (IBM x3650 M2) with about 3 TB Data on SAN (Hitachi) with lvm top of softraid (RAID1) based on multipath (2 SAN-boxes in different buildings). After booting the server, multipath starts, but no md starts the mirror. The same configuration with SLES 10 works.
cat /proc/mdstat
Personalities : [raid1]
md13 : active raid1 dm-17[1] dm-14[0]
[code]....
CentOS 5 Server :: Remove/Disable Software Raid Without Formatting?
Nov 8, 2010I am currently running CentOS 5.5 on a software raid 1 setup.
I would like to remove the raid configuration and have it run without raid.
How would one go ahead and do this?
CentOS 5 Server :: Best Practises For Managing Software Raid Arrays?
Jun 10, 2011With mdadm was only able to add a new drive to the using the --force function. I do not feel comfortable with using the function that way though.
When I remove a disk in VMWare, it perfectly says that the drive is lost and the array is degraded (mdadm --detail /dev/md0). Although after re-adding the drive, it immediately shows device as busy for both mdadm and sfdisk when I don't use --force.
Recovery and repairation of degraded array worked fine with sfdisk --force, mdadm --add --force, it automatically started recovering and took not so long.
What are best practises to manage software raid-1 arrays?
Server :: Setup An Incoming And Outgoing Mail Server On Centos?
Feb 22, 2010What is the easiest way to setup an incoming and outgoing mail server on centos? Without using a control panel, such was webmin.
View 2 Replies View RelatedSoftware :: Get An X Window Server Setup On My CentOS 5.3 Server Rack?
Jan 5, 2010I am trying to get an X window server setup on my CentOS 5.3 server rack. I have gotten as far as to doing:
yum groupinstall "X Window Sever" "GNOME Desktop Environment"
EDIT-Forgot to mention that I did Xorg -configure before testing the config. Only errors I got were:
(EE) LoadModule: Module ati_r500 does not have a ati_r500ModuleData data object.
(EE) Failed to load module "ati_r500" (invalid module, 0)
[Code]...
Linuxquestions--I posted this over on the CentOS forums, which are not as booming. Then I remembered these forums for when I had my VPS way back when and you guys were pretty helpful, of course expected me to mostly do my own reading which I dont mind its just having a hard time understanding some of the things in what I was reading. I even believe I came here with this problem before but abandoned the issue because my VPS was not powerful enough or something of the sort, but this was many years ago also on CentOS using apt. Now using yum which I like much better.
CentOS 5 Server :: Email Server Setup Using Sendmail And Dovecot?
Apr 24, 2009I am trying to set up a mail server on centos5 using sendmail and dovecot, and eventually spamassassin and some antivirus filter as well. I'd also like to get the proper secure auth mechanism set up at some point too. But for starters, I've been having a lot of difficulty trying to even connect to the mail server from a client computer in the local network. I installed Eudora on the client and after some tweaking in dovecot I was able to connect to the mail server, but then when I try to send an email I get a "connection refused" error, with nothing being logged on the server that I can see.
The last time I set up a mail server was Fedora Core 2, so the configuration files have changed a bit to say the least, and I can't really refer back to those to set up this new server. Does anybody know of a good step-by-step doc on getting the mail server going? I've read the man pages and other various readme's, but these really only list out the available options with no really good explanation of what needs to be done to get the mail server going. If there isn't a full write-up on how to do this, I'll put something together when I'm finished so others can use it in the future.
CentOS 5 Server :: MySQL Server Setup For Remote Access
May 4, 2009I have just installed CentOS 5. I have set mysql database to access from remote machines. But now the problem is it is not connecting from the local machine now.
View 5 Replies View RelatedCentOS 5 :: Easiest Way To Mirror Existing Server Setup On A New Server?
Jan 13, 2011We have two CentOS 5 servers in production (web and database). We are setting up a single staging server that will mirror the configurations of these servers as closely as possible. What is the easiest way to ensure the exact same software and configs as the production servers are setup on the new staging server. Our contracted data center provider has already informed us that they do not perform images and NO we do not have physical access to the machines. It is undetermined whether we will be virtualizing the staging server into two virtual servers yet, so for the purposes of this post lets assume we are not. I'm seeking a faster/more precise method than doing this by eye and hand.
Some information on our web server code...
CentOS 5 Hardware :: Setting Up RAID On Compaq Proliant DL580 G1 Server?
Aug 1, 2009how to setup RAID on a Compaq Proliant DL580 G1 Server. Currently there is no OS installed. I used the SmartStart CD but there is no option to setup RAID. When I put in the boot CD for CentOS 5 it recognizes individual hard drives not a RAID Setup.
View 4 Replies View RelatedCentOS 5 Hardware :: Install A RAID 1 On A Dell Power Edge Server?
Feb 10, 2010I am trying to get a understanding of how to install a RAID 1 on a Dell Power Edge server.
HARDWARE:
2 - 16gig SCSI dives
1 - 36gig SCSI drive
I have read through some documentation found online and at centos.org but still having problems.
get this accomplished keeping in mind this is my first go at using RAID system.