CentOS 5 :: Saslauthd Missing Mech "sasldb" (tried Rebuild)?
Jul 31, 2009
I'm migrating from a system that has sasldb enabled as a mechanism for saslauthd. For CentOS, this feature is commented out (disabled) in the *.spec file for the RPM, and the default mech in /etc/sysconfig/saslauthd is MECH=pam. I would prefer the authentication passwords be separate from the system login (in my case, /etc/passwd).
I tried rebuilding the SRPM with rpmbuild, but ran into errors after adding the switch --enable-auth-sasldb. Is there some clever way around this, where I can get the /etc/sasldb2 used under PAM? Or am I just approaching this incorrectly.
View 1 Replies
ADVERTISEMENT
Apr 29, 2010
I made a script that, by using "rpmrebuild" (which is available on SourceForge and uses rpmbuild as its backend), recreates all the currently installed RPM packages and stores them in a user-defined directory.
Everything works like a charm, except for a few packages.
Those packages fail to build because some of the files they should contain are missing on the filesystem.
This is an example of the errors I get:
Code:
error: File not found: /etc/identd.key
File not found: /etc/identd.key
/usr/lib/rpmrebuild/rpmrebuild.sh: ERROR: package 'pidentd-3.0.14-5' build failed
error: File not found: /usr/share/ssl/certs/stunnel.pem
File not found: /usr/share/ssl/certs/stunnel.pem
/usr/lib/rpmrebuild/rpmrebuild.sh: ERROR: package 'stunnel-3.26-1.7.3' build failed
Is there a way to ask rpmbuild (because yes, rpmrebuild allows to pass parameters to rpmbuild) to *ignore* the missing files?
View 4 Replies
View Related
Nov 21, 2010
When trying to rebuild a RAID1 on a FastTrak TX4310 controller after a disk was replaced the below message is given:
Code:
[root@SAMBA Samba]# dmraid -R pdc_gigcjhdfa /dev/sdc
Volume "pdc_gigcjhdfa" is not in rebuild state (current: 16)
Rebuild: cannot rebuild from current state!
View 4 Replies
View Related
Jul 18, 2009
I want rebuild my 2.6.18.-128.e15 kernel in CentOS 5.3? but i have one trouble. When i type make bzImage I see
make[1]: *** No rule to make target `init/main.o', needed by `init/built-in.o'. Stop.
make: *** [init] Error 2
on the screen. It is because kernel sourse codes are not full. I can not search full sourse codes of 2.6.18.-128.e15 kernel.not in src.rpm , not in tar.bz2 etc.
View 5 Replies
View Related
Apr 6, 2009
I've got a server running a software Raid for SATA disks on a P5E motherboard.
I had to had a lot of memory on thi sserver, then I have had to flash the bios. This has resetted the software raid on the disks, then when I boot, i got a Kernel Panic cause it doesn't find anything ...
how to rebuild the raid ? I can boot on a live cd, or anything else, but don't know how to do it without loosing my data.
View 2 Replies
View Related
Nov 13, 2009
I'm working on the development of a custom kernel (actually just a "small" change in the networking part), from the standard 2.6.23.17 source code (downloaded from kernel.org), on CentoOS 5.3. I'm using the following procedure to build and install the kernel:
1)cd <ROOT_DIRECTORY_OF_KERNEL_SOURCE>
2)Modifiy the 4th line of the Make file as follows:EXTRAVERSION = .17CUSTOM
3)make clean && make mrproper
4)make menuconfig
5) make rpm
[Code]...
View 2 Replies
View Related
Oct 25, 2010
I would like to rebuild the live cd 5.5 of centOS to add some application. I am looking for source code to rebuild live cd 5.5.
View 1 Replies
View Related
Oct 6, 2010
I have an Nvidia graphics card,... actually I manage several workstations that run centos and have an nvidia video card. I also have a personal computer with ubuntu and an nvidia network card.
I would like to do a regular automatic update of those Centos workstations. (With a pilot group to test and then a full roll-out). Until oktober 2009 no major difference in automatic updating ubuntu and centos (apart from the differences between apt and yum):
After a kernel upgrade, the systems can not boot into it's Xorg gui, because the nvidia driver must be rebuild (=not recompiled, because this is partially object code, the driver is not opensource).
But from ubuntu 9.10 onwards, the kernel update process checks for the presence of propietary drivers like those of nvidia and does a rebuild on the reboot, so that the system can succesfully boot into the xorg GUI (and gdm or kdm) My question is: Are ther any plans for Centos to do the same, this would relief me from some upgrade hassle for the Centos workstations that I manage. Or does anyone know about a (good) automagic workaround?
View 6 Replies
View Related
Jan 16, 2010
I have set up a software raid 5 and a software raid 1 on the same 3 disks.
But my problem is, every couple of days the software raid starts automatically resyncing. This resync is always succesful.
I do not know why this happens, any ideas to troubleshoot this further? I can not see an error in /var/log/messages
View 14 Replies
View Related
Mar 24, 2011
After restoring from a hardware failure, I cannot get bridging to work again. I reinstalled the host version 5.5, and copied the .img file back onto the rebuilt machine. I also had the network scripts and iptables backed up. Through virt-manager I re-attached the virtual machine, and when I boot it, I get a MAC address conflict on the vm's eth0; "Device eth0 has a different MAC address than expected". The vm had a static ip address.
[root@trngvh ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1
DEVICE=eth1
HWADDR=00:24:81:E4:FC:02
[code]....
View 10 Replies
View Related
Dec 9, 2009
I have a serious problem in booting centos 5.4 x86 as shown in the attached picture.I tried to backup before using fsck command, but I could not make a backup of damaged lvm on hard drive.First I made a rescue centos at virtualbox, and installed centos 5.4 x86 on virtual hard disk.And I attatched damaged hard drive. S I can see this damaged hard drive's lvm as attached picture.Please let me know how to backup my files and to use "fsck.ext3 --rebuild-tree using livecd".
View 2 Replies
View Related
May 3, 2011
I'm building a new machine with slackware 13.37 64bit and so far all has gone well except for secure smtp. My previous setup was with slackware 13.1 32bit which worked fine. If I run with (`confAUTH_OPTIONS', `A p y') in my sendmail config it shows "AUTH warning: no mechanisms" in my maillog and obviously fails to authenticate. When I take the 'p' out and run with (`confAUTH_OPTIONS', `A y') then it does list the defined confAUTH_MECHANISMS and works. I would prefer to run with the 'p' option and require the security layer.
Most of my setup guidance has come from the "Sendmail SMTP AUTH Howto":
http://www.linuxquestions.org/questi...-howto-224543/
The Sendmail "TLS SASL SMTP-AUTH" page on slackwiki:
http://www.slackwiki.org/Sendmail_TLS_SASL_SMTP-AUTH
And this page for debugging "How to test Sendmail SASL Authentication":
http://networking.ringofsaturn.com/P...entication.php
[Code]...
My hope is that I'm just missing something simple. Does anyone have insight into why adding the 'p' to confAUTH_OPTIONS is causing this behavior?
View 2 Replies
View Related
May 8, 2011
I'm building a new machine with slackware 13.37 64bit and so far all has gone well except for secure smtp. My previous setup was with slackware 13.1 32bit which worked fine.
If I run with (`confAUTH_OPTIONS', `A p y') in my sendmail config it shows "AUTH warning: no mechanisms" in my maillog and obviously fails to authenticate.
When I take the 'p' out and run with (`confAUTH_OPTIONS', `A y') then it does list the defined confAUTH_MECHANISMS and works.
I would prefer to run with the 'p' option and require the security layer.
Most of my setup guidance has come from the "Sendmail SMTP AUTH Howto":
My goal is to be able to send mail remotely with secure authentication. If the way I'm trying to go about it is old and there is some newer/better way I'm happy to go with that - but sendmail/saslauthd has worked for me in the past.
Sendmail is version 8.14.4 and looks like it has the necessary options compiled in:
Code:
saslauthd is version 2.1.23 and supports shadow:
Code:
I did discover the need to link /etc/sasl2 to /usr/lib64/sasl2 and created the Sendmail.conf file there:
Code:
Here's the sendmail configuration script I'm using. Its really just the vanilla /usr/share/sendmail/cf/cf/sendmail-slackware-tls-sasl.mc file with my cert file names:
Code:
When I try to connect with (`confAUTH_OPTIONS', `A p y') in the config here is the output I get in maillog (none of the other logs seem to show anything and I dont see any errors/warnings when I restart sendmail):
Code:
If I change the option so its just (`confAUTH_OPTIONS', `A y') then it does work and this is the log output I get:
Code:
My client is configured to use SSL and when I go through the setup, it does appear to authenticate against the smtp server and it validates. The fail comes in when trying to actually send mail.
Does anyone have insight into why adding the 'p' to confAUTH_OPTIONS is causing this behavior?
View 4 Replies
View Related
Jul 23, 2010
I recently installed a server with Software RAID. I tested by powering it down, unplugging one drive and powering it up. Magically, it worked!I found out later that I have to manually add individual devices like md1 to sda2 md2 to sda4. I got all of them added and rebuilt but my question is: Is there a way to make it so that if I "removed" a drive and put it back, the system will senses the new drive and rebuilds based on some internal table?
View 1 Replies
View Related
Dec 17, 2010
I have been trying to install clisp on one of our systems and get the error: Missing Dependency: libsigsegv.so.0()(64bit) for package: clisphowever, I have checked and the library libsigsegv-2.7-1.el5.rf.x86_64 and its associated header file package are, in fact,installed.
View 3 Replies
View Related
Jun 15, 2011
I tried to installed Centos5.4 version on Dell PC intel corei3 inspiron580s and succeeded but found some issues following below
1 Hardware issue for LAN driver ( Broadcomlink(TM)gigabit ethernet)
2 Display Driver not support and also missing Xorg.config file (i.e ., My Screen Starts from center of screen )
3. What is minimum configuration for centos 5.4 ?
View 2 Replies
View Related
May 18, 2009
Fresh instalaation of Centos 5.3 (32 bit machine). Got the Dag-Wier repos set up. Ran yum install videolan-client which found one missing dependency: libdvdread.so.3 is needed by vlc.0.9.9-2.el5.rf.i386. Looking in /usr/lib, I find libdvdread.so.4.1.3 installed, but no libdvdread.so.3. I created a symboloic link libdvdread.s0.3 -> libdvdread.so.4..1.3 and rand ldconfig. Tried to install videolan-client again with yum but got the same failed dependency. how to get vlc installed?
View 3 Replies
View Related
Jun 13, 2009
After upgrading to 5.3 I don't have xm anymore, anyone else with this problem or know how to fix it?
Quote:[root@xxxxxxx /]# xm list
bash: xm: command not found
View 2 Replies
View Related
Jan 12, 2010
I don't know why but my Yum is completely missing on my CentOS 5.2 code...
View 12 Replies
View Related
May 28, 2010
Today, I try to update firefox by Package Updater but show error by bellow. "Missing Dependency: xulrunner >= 1.9.0.19-1 is needed by package firefox-3.0.19-1.el5.centos.x86_64 (CentOS5updates)"
View 6 Replies
View Related
Mar 12, 2010
Not so long time ago I have installed Centos 5.3 on my AMD Phenom II X4 server (I am hosting game servers on it). Only today I noticed, that cpuinfo shows me only two CPUs. I watched for the info in the dmesg and found there that the system boots up only 2CPUs.
Here is some info from the dmesg:
Quote:
Linux version 2.6.18-164.11.1.el5 (mockbuild@builder10.centos.org) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Wed Jan 20 07:32:21 EST 2010
Command line: ro root=/dev/VolGroup00/LogVol00
ACPI: Local APIC address 0xfee00000
[Code]....
Am I correctly understand that something wrong in BIOS? Or it is something else?
View 9 Replies
View Related
Mar 25, 2010
I have a CentOS install but I have problem with repositories(I guess) because I can install almost basic system programs nothing more. How I can check the repositories list with the url of repo? Are they like in Ubuntu or Debian repo universe etc.? For e.g., I'm trying to install lighttpd from source but I can't get dependencies from the repo such as headers and more...
View 4 Replies
View Related
Oct 22, 2009
I have just done the upgrade to CentOS 5.4, but it seems that the iptables library libipt_time.so is no longer provided in /lib/iptables in the distribution. The currently installed version is iptables-1.3.5-5.3
I am getting this error message: iptables v1.3.5: Couldn't load match `time':/lib/iptables/libipt_time.so: cannot open shared object file: No such file or directory
Have the -m time components been moved to another library or removed from iptables? How do I stop iptables from trying to load this non-existent library?
View 1 Replies
View Related
Jan 10, 2010
i was trying to install iftop using make installso when i ran /configureit told me that some header files are missing and some modules aaare also missingis there a way to search for the missing header files on the internet and missing modules n the internet
View 1 Replies
View Related
Feb 4, 2010
I installed HP Linux Imaging and Printing system yesterday and since then my panels are missing, is there a way to access the config files to correct this?
View 1 Replies
View Related
Oct 7, 2010
I use a Windows computer to remotely operate two Centos 5.4 boxes over the Internet. For text or console work I use putty which does an excellent job. But sometimes I need to run a graphical app such as xterm. For that, I use an X Server such as Xming or MobaXterm. Until today, that was working reasonably well. On one Centos, it still does. But on the other one, I started getting an error message that I have not seen before:
[root ]# /usr/bin/system-config-network connect /tmp/.X11-unix/X0: No such file or directory The application 'system-config-network-gui' lost its connection to the display localhost:10.0;
most likely the X server was shut down or you killed/destroyed the application. [root ]# xterm connect /tmp/.X11-unix/X0: No such file or directory X connection to localhost:10.0 broken (explicit kill or server shutdown). [root ]#
View 2 Replies
View Related
Mar 2, 2011
I have been trying to get an app to work and it needs x11 I have that working but than the app complains xrand is not avilable. Dose enybody know a solution or a pre patched x11 rpm for this??
View 7 Replies
View Related
Apr 12, 2011
I'm trying to download some SRPMS from CentOS 5.6 tree, but it seems that a lot of mirrors are not yet synced for the SRPMS directory.
I barely see the repodata and xml files inside it, but no SRPMS at all.
Is it a deliberate action to provide faster distribution of the 5.6 install tree or someone forgive to give the last rsync?
View 7 Replies
View Related
Apr 20, 2011
Where can I find SRPMs for the latest python-2.4.3-43 and gcc-4.1.2-50 included in CentOS 5.6? They seems to be missing from centos/5.6/os/SRPMS on all mirrors that I checked...
View 1 Replies
View Related
Mar 12, 2010
Not so long time ago I have installed Centos 5.3 on my AMD Phenom II X4 server (I am hosting game servers on it). Only today I noticed, that cpuinfo shows me only two CPUs. I watched for the info in the dmesg and found there that the system boots up only 2CPUs.Here is some info from the dmesg:
Linux version 2.6.18-164.11.1.el5 (gcc version 4.1.2 20080704 (Red Hat 4.1.2-46)) #1 SMP Wed Jan 20 07:32:21 EST 2010
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 0:4 APIC version 16
[code].....
View 1 Replies
View Related
