CentOS 5 :: "hald" - IRQ Handler Type Mismatch For IRQ 12
Mar 21, 2009
I receive the following kernel trace message during the boot process after a fresh install of CentOS 5.2 x86_64. The trace occurs during the initialization of HALD in the boot process. From what I can tell things seem to be functioning properly, but I still would like to get rid of the noise for peace of mind.
Below is the pertinent information to date.
/var/log/messages:
With regards to hardware and operating system; all blades are identical with the exception of the amount of physical memory. The installation is done via kickstart against a frozen CentOS 5.2 x86_64 repository.
Server:Dell PowerEdge M600
Chassis:Dell PowerEdge M1000e
Processors:Dual Intel(R) Xeon(R) CPU E5450 @ 3.00GHz
Memory:16G/32G
OS:CentOS release 5.2 (Final)
Kernel:Linux dell-3-2-1 2.6.18-92.1.22.el5 #1 SMP Tue Dec 16 11:57:43 EST 2008 x86_64 x86_64 x86_64 GNU/Linux
Some googling has revealed or suggested that it may be related to a keyboard ps/2 interrupt. I have tried booting with noapic and received the same results.
Below are the contents of the interrupt table after each boot.
/proc/interrupts booting apic:
My next step is to install Redhat 5.3 x86_64 on the next blade I free up to see if I receive the same error.
View 9 Replies
ADVERTISEMENT
Jan 31, 2011
solve the following problem...mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combiningThis i am getting many lines in DMESG.
View 10 Replies
View Related
Nov 17, 2008
came to linux around 3 months ago. not up to speed by any means but want to stick with and get out of the windows trap. i used to plug in my external drives and they would be recognized but now they are not and I get HALD is not turned on please turn on
View 1 Replies
View Related
Mar 1, 2011
uname -r prints 2.6.18-164.el5
Yum install kernel-headers/kernel-devel gives me 2.6.18-194
When trying to run virtualbox I get an error:
Kernel Driver not installed: (rc=-1908)
Please reinstall the kernel module by running "/etc/init.d/vboxdrv setup" as root...
/etc/init.d/vboxdrv setup
Stopping VirtualBox kernel modules [OK]
Uninstalling old VirtualBox DKMS kernel modules [OK]
Trying to register the VirtualBox kernel modules using DKMS
Error! Your kernel headers for kernel 2.6.18-164.el5 cannot be found at /lib/modules/2.6.18-164.el5/build or /lib/modules/2.6.18-164.el5/source. [FAILED]
(Failed, trying without DKMS)
Recompiling VirtualBox kernel modules [FAILED]
(Look at /var/log/vbox-install.log to find out what went wrong)
I'm assuming the setup program is using the output from uname -r to determine the kernel, the problem is the kernel sources I've got from yum do not jibe with the uname value.
View 4 Replies
View Related
Sep 18, 2010
Summary: Does a discrepancy between MySQL client library 5.0.x and MySQL server of 5.1.50 cause "inconsistent behavior", as reported by phpMyAdmin? The longer version: Windows Sysadmin taking the plunge into Linux. I tried to spare you all the rookie questions and did a fair bit of reading. I'm rather happy I was able to get CentOS 5.5 installed and running, configured iptables, got the kernel updated, Apache, MySQL and PHP installed. Then upgraded PHP to 5.2 after I figured out how repos and priorities work.
I got phpMyAdmin installed and running, then decided to upgrade from 2.11 to 3.3.7 but it keeps complaining that my MySQL client libraries are something like 5.0.63, while my server is 5.1.50, and this may cause "inconsistent behavior" or something of the like. So, feeling industrious, I decided to find an updated client.
MySQL-client-community-5.1.50-1.rhel5.i386.rpm
But it wouldn't let me install it as it conflicted with the default mysql-server installation. I also couldn't remove just the old client, to update to a newer one. So I blew away everything mysql on my server and installed the above client
MySQL-server-community-5.1.50-1.rhel5.i386.rpm
and that server file. I'm assuming I'm missing dependencies now as phpMyAdmin claims it can't load the mysql extension. Attempting to 'yum' php-mysql tried to install 'mysql' as a dependency, which immediately conflicted with the files I'd installed. At this point I'm wondering if I'm closing in on successfully installing a version that phpMyAdmin doesn't complain about, or if I should even care that it is complaining and just go back to all the repo versions of everything.
# rpm -e MySQL-shared-community-5.1.50-1.rhel5.i386.rpm
error: package MySQL-shared-community-5.1.50-1.rhel5.i386.rpm is not installed
View 4 Replies
View Related
Jun 11, 2010
I was creating an OpenGL+GLUT+Perl Simulator, and I got this error on starting it:
Error: API mismatch: the NVIDIA kernel module has version 195.36.15, but this NVIDIA driver component has version 195.36.24. make sure that the kernel module and all NVIDIA driver components have the same version. The app still works fine, but I have no clue what to do about this.
View 1 Replies
View Related
Apr 1, 2009
when i open the shell console i get this error message Konsole is unable to open a PTY (pseudo teletype). It is likely that this is due to an incorrect configuration of the PTY devices. Konsole needs to have read/write access to the PTY devices.Now from what i have read i need to change some permissions, but i have no idea how The second problem related to Terminal, no command prompt appears so i cant type anything to run a programme
View 12 Replies
View Related
Dec 6, 2009
I have CentOS 5.4 installed within a Virtual machine using VMware 6.5. After my install I found that I couldn't type parentheses by pressing SHIFT+9 or SHIFT+0.
View 1 Replies
View Related
Mar 21, 2009
Once you have VLC open, select file, it only lists certain file types. Now if you go down to the bottom you can tell it to use other types (like *.*). How does one set it so one does not have to go down and change the file types every time? So that it shows all file types, all the time, by default.
View 1 Replies
View Related
Apr 13, 2009
I've downloaded a big file from another server via "wget" to my /backup/ directory, and after the download was compeded I did run "ls" and the error was:ls: full_plesk_backup: Value too large for defined data type.
View 13 Replies
View Related
Jun 21, 2011
We new have server with VmWare ESXi4.1 and we created virtual machine with CentOS5.6.This CentOS5.6 virtual machine will be used as webserver. We need to backup all files and have access to these files. We are going to keep all websites, databases, backups on data storage (NetApp FAS2000 series).
We have two options to how to use this storage:
1: We can mount storage volume directly to CentOS5.6 by NFS.
2: We can add storage via NFS to VmWare and then add new virtual disks to CentOS5.6 by VmWare vSphere client.
What option would you recommend to use? Which option is better, faster and more secure? My thoughts:If we mount storage volume directly to CentOS5.6 so we can access .snapshot directory there is all snapshots. So it's easy to access all backed up files. NetApp has snapshot system and we can schedule to make snapshots automatically, so we don't need to setup any additional backup utilities in CentOS5.6. But we don't have any NetApp snapshot restoring software license so copy/paste from .snapshot directory is only option.
If we add storage to VmWare firstly (by NFS) and then add new virtual hard disks to CentOS5.6 by VmWare vSphere client so we have to setup rsnapshot(or any similar utility) to make backups in CentOS5.6. But NetApp will also make backups of .vmdk files. So it's like double backups, lol :) If storage crashes so we screwed in both ways, I think.
View 2 Replies
View Related
Feb 18, 2010
When I run 'parted' and then type 'print' to see the partitions that are available, I see two entries: /dev/sda1 and /dev/sda2. /dev/sda1 is of ext3 type whereas for /dev/sda2 nothing is specified for file system type. The LVM flags are set for /dev/sda2.
When I tried to resize /dev/sda2, it gives me the error "File system type not recognized". let me know how to find out the file system type of the partition.
View 3 Replies
View Related
May 31, 2011
I have updated bind using yum on a Centos 5.3 server, after restarting, I have this error now.
Error in named configuration:
zone localhost/IN: loaded serial 42
/var/named/mydomain.hosts:20: unknown RR type 'SPF'
My version of is : bind.x86_64 30:9.3.6-16.P1.el5
View 2 Replies
View Related
Apr 2, 2009
Ok so I am doing a fresh install of 5.3 .... At the begning of the install after i get into it a get a screen that says "What type of media contais the packages to be installed?" with options... Local CDROM, HD, NFS Imahes, FTP, HTTP.I have a LG GH22NP20 that installed 5.2 fine on the system..... And can load the cd....?>
View 19 Replies
View Related
Jan 13, 2010
I have a server with two hard disks SATA (500 GB), I installed centos in one of them, desire to know how I can mount the other hard disk empty and without format, so that this hard disk always appears mounted when "reboot" the system.
View 1 Replies
View Related
Jul 31, 2010
SAN admin needs me to change the host port_type from an NLPort to an FPort,is[/sys /class /fc_host/host1/port_type] however i can not find anywhere to change this.the driver in question is Fusion MPT.
View 2 Replies
View Related
Feb 23, 2010
How can I set the handler without panel?
like when it's set to dso without panel
and next my qus is :
where is mod_cgi.so in whm panel ? i want edit this file but i can not found this file
View 1 Replies
View Related
Dec 30, 2009
I'd like to propose the following program, which I might write if nothing like this already exists. It would be similar to the "script" program in that it will allocate a new pty/tty pair and start a new session. But unlike the "script" program, it will provide a means to have BOTH the normal terminal session going AND a script or input source to provide input. It could be used, for example, to pre-start programs inside the pty session, and at the end, let the controlling tty it was started in fully interact with it (something that can't happen if it was started with input piped from the script).
My design would allow running a control script right from the beginning, or at any later time. The control script can see output from the session, filter that output for the controlling tty to see, provide input, maybe even filter the controlling tty input, too. When the script ends, the session can remain for regular interaction. Also, an environment variable will be set in the session to allow programs inside the session to provide similar controls, such as feeding input. That environment variable might be a local port number to connect to, with an access key or encryption key, to provide input and/or control commands.
I have several uses for this. Many of those uses could be done using other tools, but not all the uses would hit the same tools. But by doing it all in a program like this, I see a great many of my uses all solved in a single project, even if it isn't the most elegant (but I see solving many problems with one solution as being its own kind of elegant).
View 1 Replies
View Related
Dec 9, 2009
I installed Centos server and when I type this command to edit my network IP address I get this error.
View 5 Replies
View Related
May 22, 2010
I am looking for a good audio session handler.
On ubuntu I have seen Ladish but it is a preview release.
Is there a good audio session handler for openSUSE.
http://ladish.org/wiki/demovideo
View 4 Replies
View Related
Oct 11, 2010
I recently installed openSUSE 11.3 (4 times, I think, which gives me always a new name for the "server" and in my terminal screen I continuously get this error: Message from syslcgd@linux-i4cz at Oct 12 06:21:57 ... kernel:[2866.05E384] do_IRQ: 0.91 No irq handler for vector (irq -1) the number after kernel: varies I then hit a few time son the [I]enter[I] key and then I get my linux prompt.
View 2 Replies
View Related
Feb 4, 2011
In my system around 73gb(pc-desktop) i have,1 primary partition(windows)-25gb, 1-extended partition(remaining gb) 3 logical partitions were there in (under) extended partition in one of the logical partition is d:drive. in my hard disk d: drive is -/dev/sda5
previosly i was fat -file system , (d:drive-/dev/sda5), i remember i changed the d: drive(d:drive-/dev/sda5) file system to ext4file system ,with following command using terminal
After doing(changing the file system)this one ,i couldnt see the d:drive data
By doing that
1q) Did i reformatted the partition? i think the new filesystem(ext4) has no knowledge of the data that was on it when it had a FAT filesystem.
2q) How to do undo operation,i tried to change the filesystem type to fat/ntfs in terminal using command --sudo mkfs -t FAT /dev/sda5.
Result:its showing text message-'mkfs.FAT: No such file or directory'(not in single quote)
I had very imp data in d:drive
View 1 Replies
View Related
Feb 26, 2010
I just loaded octave. I ran through a few examples of how to implement a script file. Everything works until I get to "plot". When I run the "plot" command I get the following.
octave:2> test1.m
error: can't perform indexing operations for <unknown type> type
sh: gnuplot: not found
Just to double check my work, I ran the following code:
y=[1 2 3];
plot(y);
View 3 Replies
View Related
Dec 2, 2010
Assume: 1) Multi-cpu environment 2) Process that gets interrupted, is the same process that executes the interrupt handler, so I guess technically nothing gets interrupted except what the process was doing before, but it is still executing as it is executing the handler. 3) There is no top or bottom half, when an interrupt takes place the handler is invoked, executes, then return from interrupt, simple as that.
Why would sleeping the handler (puts in sleep queue, context switch to next runnable process) be a bad idea?
View 1 Replies
View Related
Apr 17, 2010
Ubunto is new to me when I try to play a movie I get the message, "no URI handler implemented for dvd".
View 1 Replies
View Related
Sep 29, 2010
I want to define a simple error handler for a script. Image a script that does a few commands:
Code:
ls .
cd ..
touch ...
whatever, it doesn't matter. I want to define one error handler for the script, so if any of the steps error than the script is terminated and the error handler is run. I see the -e option to quit on errors, but I want a GOTO on errors.
View 1 Replies
View Related
Nov 1, 2010
Is it possible to connect a signal handler to a variable?So when the variable changes the signal handler is called.I have a vector containing strings which i want to parse when there are one or more available strings in the vector
View 3 Replies
View Related
Oct 29, 2010
What is Fedora's best document organizer software? All the best, Novatian.
View 2 Replies
View Related
May 24, 2011
I am copying the file form one directory to another directory using shellscript.
Here i want to get the Mimetype/Content-type of the file.
How to i can get the MimeType.
View 9 Replies
View Related
Jun 22, 2010
I have a server hacked when i try to log in i type root but won't let me type a passwdthere are no services up, can't see page mail nothing
View 11 Replies
View Related
