I am looking for a good audio session handler.
On ubuntu I have seen Ladish but it is a preview release.
Is there a good audio session handler for openSUSE.
http://ladish.org/wiki/demovideo
I recently installed openSUSE 11.3 (4 times, I think, which gives me always a new name for the "server" and in my terminal screen I continuously get this error: Message from syslcgd@linux-i4cz at Oct 12 06:21:57 ... kernel:[2866.05E384] do_IRQ: 0.91 No irq handler for vector (irq -1) the number after kernel: varies I then hit a few time son the [I]enter[I] key and then I get my linux prompt.
View 2 Replies View RelatedI'm having problem with XBMC sessions at startup. If a session is started automatically, i have no audio. IF i load gnome, then xbmc inside gnome. i have audio. If i then log out and log in using a xbmc session, i have audio. If i reboot then start xbmc a session (without logging into gnome and running it first), i have no audioWhats the deal? Originally i had problems with permissions, i hadn't selected "use audio devices" in the permissions menu when adding the user. Once i did this, i was able to use audio in gnome, then in xbmc. But never in when starting a sessions in xbmc first.
View 1 Replies View RelatedThe following message comes up when I boot up: Logging in user Warning: Cannot open ConsoleKit session: Unable to open session: Launch helper exited with unknown return code 0. When I press OK, the system completes the start up and everything looks normal. But when I try to connect to internet, I get the following message:
KNetworkManager cannot start because the installation is misconfigured. System DBUS policy does not allow it to provide user settings; contact your system administrator or distribution. KNetworkManager will not start automatically in future. If I reboot the system, I logg in successfully. So far the problem has appeared approximately upon every second time I boot up. Rebooting the system seems to take care of it.
Don't know what info is of interest. I'm using
Opensuse 11.2
KDE 4.4.2 (Factory)
After upgrade from 4.4.1 to 4.4.2 it worked fine for a week or so.
I have behringer UCA202 usb card, after plug to usb, it just works , I have only small problem with alsamixer, which still shows by default my integrated HDA Intel, I could switch it by F6 or by alsamixer -c 1no problem, but I expect that default card is now plugged "USB audio", so why alsamixer recognize default audio device as HDA intel and not a USB Audio ?anyone who has two or more sound cards with the same issue ?
View 3 Replies View RelatedI'm thinking of installing openSUSE-11.1 Gnome on a Fujitsu-Siemens Amilo 7400M laptop because the wireless in Gnome is much more user friendly than KDE3/KDE4 in openSUSE-11.1. The idea is to give this laptop to my 84-year old mother and things need to 'just work' for her (she currently has a desktop running openSUSE-11.1 KDE3 that uses a WIRED interface to the web).
I refuse to update this laptop to openSUSE-11.2 nor 11.3 (nor other recent distributions) because every kernel update after the 2.6.27 kernel has broken the Intel i855GM graphics drivers for that laptop. There are many bug reports and none have fixed the problem for this Fujitsu-Siemens implementation of the i855GM graphics.
Hence I am looking at Gnome.
I booted the laptop to a Gnome openSUSE-11.1 liveCD and wireless is easy and works great. But audio is very very VERY bad. It is incredibly user unfriendly and it does NOT work well. I assume that is because pulse audio in openSUSE-11.1 was very immature.
I note these updated packages in the openSUSE-11.1 update repository:
Code:
So my question is, did the updates to pulse audio (in the openSUSE-11.1 update repository) fix the pulse audio situation? Are there ANY helpful views on this?
Currently my wife is using this laptop with KDE-4.4.4 (and openSUSE-11.1) so I can't just install Gnome and play with it without taking the laptop away from her for a while (note the hard drive is too small for a dual boot of KDE/Gnome).
to start off, i'll post the specs of the machine:
dell inspiron e1505
3.2 gb ram
1.86 ghz intel core duo
ati x1400 gfx
opensuse 11.4 kde 32 bit.
okay, here are the details: can't play any audio with amarok when desktop effects are enabled because the minute a window is moved, it will distort the audio. even when disabling desktop effects, some applications still cause this. can't play videos videos even with desktop effects disabled because of the same reason.
i just switched from ubuntu and when i ran version 11.04, i had to disable kms to do anything. i tried on opensuse 11.4 and the audio was flawless but the gfx went all to hell.
on my PC I have 2 sound drivers, one from the mainboard (AC97) and one PCI card (ES1969). Because the mainboard sound path did not recording, I installed the PCI sound card and with 11.1, I managed it to play and record all audio data. With 11.2 the PCI sound path plays the system sounds (suse start-up or shut-down sounds) but not the streaming audio data (skype, flash player). But these are played by the mainboard audio instead. The audio-tests from yast->hardware->sound work for both paths. How should I configure the system to redirect the audio streams to the desired (PCI) audio path? The PCI audio is set as primary sound card and is not muted.
View 2 Replies View RelatedHow can I set the handler without panel?
like when it's set to dso without panel
and next my qus is :
where is mod_cgi.so in whm panel ? i want edit this file but i can not found this file
I'd like to propose the following program, which I might write if nothing like this already exists. It would be similar to the "script" program in that it will allocate a new pty/tty pair and start a new session. But unlike the "script" program, it will provide a means to have BOTH the normal terminal session going AND a script or input source to provide input. It could be used, for example, to pre-start programs inside the pty session, and at the end, let the controlling tty it was started in fully interact with it (something that can't happen if it was started with input piped from the script).
My design would allow running a control script right from the beginning, or at any later time. The control script can see output from the session, filter that output for the controlling tty to see, provide input, maybe even filter the controlling tty input, too. When the script ends, the session can remain for regular interaction. Also, an environment variable will be set in the session to allow programs inside the session to provide similar controls, such as feeding input. That environment variable might be a local port number to connect to, with an access key or encryption key, to provide input and/or control commands.
I have several uses for this. Many of those uses could be done using other tools, but not all the uses would hit the same tools. But by doing it all in a program like this, I see a great many of my uses all solved in a single project, even if it isn't the most elegant (but I see solving many problems with one solution as being its own kind of elegant).
can any tell me how can I configure OpenSuse for login session (kde/gnome) using a certificate in a SmartCart (spanish DNIe).
View 5 Replies View Relatedwhen i start my pc i have an error: Consolekit session error, unknown return code 0 when i click Ok it then starts my session
View 7 Replies View Relatedhypothetically speaking, can i write a script in which a telnet session is opened and then some more commands are forwarded to that session?
View 4 Replies View RelatedI have a very bad attempt at hashing the components of an tcp session to assign/locate the session in a hash table bucket. I am pretty sure that it has a very high collision rate and when there are a very large number of tcp sessions my application is having to search a long linked list to find the session within the bucket.
All the hashing functions I have found take a single string input where I need to input several integers and hash them into a single result. My guess is that any real hashing function is going to produce better results than what I am currently doing.
[Code]...
Assume: 1) Multi-cpu environment 2) Process that gets interrupted, is the same process that executes the interrupt handler, so I guess technically nothing gets interrupted except what the process was doing before, but it is still executing as it is executing the handler. 3) There is no top or bottom half, when an interrupt takes place the handler is invoked, executes, then return from interrupt, simple as that.
Why would sleeping the handler (puts in sleep queue, context switch to next runnable process) be a bad idea?
Ubunto is new to me when I try to play a movie I get the message, "no URI handler implemented for dvd".
View 1 Replies View RelatedI want to define a simple error handler for a script. Image a script that does a few commands:
Code:
ls .
cd ..
touch ...
whatever, it doesn't matter. I want to define one error handler for the script, so if any of the steps error than the script is terminated and the error handler is run. I see the -e option to quit on errors, but I want a GOTO on errors.
Is it possible to connect a signal handler to a variable?So when the variable changes the signal handler is called.I have a vector containing strings which i want to parse when there are one or more available strings in the vector
View 3 Replies View RelatedWhat is Fedora's best document organizer software? All the best, Novatian.
View 2 Replies View RelatedBasically I'm intending to write serial RX signal handler.Application receives defined packages of data over serial which contains header and payload. Handler should analyse incoming stream and upon detection of header (header is 6B in length) switches to receive payload of length defined in header, then after receiving full message packs it and sends to application for handling.Problem I'm facing is that at random moments in signal I receive errors that "Resource temporarily unavailable" while reading from ttyOx device and I see that sometimes I miss incoming data.Also is it possible that if while I'm handling signal one more signal arrives and it is started to be handled parallel? If it is, what are the ways to prevent it? So I would be sure that no more signals will fire on same peripheral until I will finish handling what I have on my hands now.
Serial open and init:
Code: Select allint open_port(int port_nr) {
int fd; /* File descriptor for the port */
switch (port_nr) {
case 1:
fd = open("/dev/ttyO1", O_RDWR | O_NOCTTY | O_NDELAY);
break;
[code]....
I have written a Linux kernel module (in Linux 2.4, Red Hat 9) which does the followings: It takes srcIP, sourceport, destIP, destport and loadvalue as command line arguments. If configured load value is greater than 1, it creates different channels (i.e. No of UDP channels created equals to configured load value), assign different source port and destination port to different channels and send UDP datagram in different channels. Say for example the configured parameters are as follows srcIP=10.17.17.43 destIP= 10.17.17.44 sourceport=10000 destport= 20000 loadvalue=2.
Then it creates two UDP different channels and transmits UDP packets (in every 20 milliseconds) to destination IP address (i.e., 10.17.17.44) with source port 10000, destination port 20000 in one channel and source port 10002, destination port 20000 in another channel. When I configure to pass ?loadvalue=500? and run the module, I get the below kernel panic message in system log file (i.e., var/log/messages) 0>Kernel panic: Aiee, killing interrupt handler! In interrupt handler - not syncing. Running the same linux kernel module ,in 1000 loadvalue, I get this message, eth0: Out-of-sync dirty pointer, 49937 vs. 49954 in text console. I am unable to catch the root cause of these problems and how will I solve these?
I would really like to install 2 or 3 PHP handler modules (suEXEC, FastCGI, etc) on a single server and assign which module should be used per virtual host or domain or whatever.
Is this possible?!
Could I get details?
I don't have wine installed. But I use teamviewer [URL] to remote support my friends. Teamviewer provide an "linux version" using wine wrapper. Every time I run it, some mime types such as .jpg, .wmv, .txt, .ini, v.v... was set to be handle by a "A Wine application". So, nothing happen when I open those file, I have to reset their handler to proper linux application.
1. How can I completely remove those "A wine application" handler? Is there a tool, or a settings applet in gnome that allow me to do that. Currently, I have to find those files in nautilus, right click and change the open with settings, that's frustrated.
2. Can I lock mime type handling settings from being changed by some application? Or even lock it from any changed at all? I don't mind remove the write permission from some settings file, I won't likely to change my current mime type handling settings in near future.
Is it possible to handle multiple signals in just one handler? I only know singal() catches one signal at a time
View 2 Replies View Relatedlocking mutex (phtread_t type) in a signal handler function (installed by function signal()) for Linux. It seems that if the mutex has been previously locked by another thread outside the signal handler function and then the signal handler function tries to lock it, the whole process hangs.
View 5 Replies View RelatedI'm new to Unix and every signal handler algorithm I've seen is more or less a copy of what I'm trying to do.[URL] designing a signal handler with sigwait in UNIX?
View 1 Replies View RelatedIs there a session manager I can use with 10.10? I would like to try Openbox but am not sure how to select it as a startup session. I would like to be able to choose between kde, gnome and openbox.
View 1 Replies View RelatedOdd that no posts come up in the search for "sox" or "specifically sox mp3"
How to get it up and going?
Which yum libraries need to be installed to get sox to recognize mp3s,
example: yum -y install force-mp3-to-start-working
its producing this error message: sox formats: no handler for file extension `mp3'
I am putting together some new systems for my customer and I'm having some trouble with a script that we use to back up files to a DVD R. The problem is that I can't write a 2nd session to the DVD unless I eject the disk and reload it. The drives are slimline type drives, Sony BD-5730S and Teac DV-W28S-V93, so they won't reload without human intervention. Opsys is CentOS 5.4 or RHEL 5.4. I've tried both AMD and Intel based mother boards. If i try this on Fedora 11 or 12 it works fine. This works on IDE attached drives but not a SATA attached drives. Fedora appears to use something called genisoimage instead of mkisofs. I can't get genisoimage to run on CentOS or RHEL.
Here's the code to setup the test files:
rm -f /tmp/BDtest/*
mkdir /tmp/BDtest
dd if=/dev/zero of=/tmp/BDtest/blank.iso bs=10M count=1
for NUM in {1..160}
[Code].....
I'm trying to create a signal handler thread to handle SIGALRM signals. The main thread calls the following function before creating any other threads
Code:
pthread_t Timer::Init(long _clock_interval_musec)
{
// Set interval.
clock_interval = _clock_interval_musec;
// This is called while in a single threaded environment.
[code]....
clock_interval is 50.
Is the timer not firing? Did I not set my interval correctly? Did I not proper block the signals ensuring the that the default handler would not take care of them?