CentOS 5 :: Centos Freeze After Acronis Installation?
Mar 1, 2010
I've just install a new Virtual Machine with Centos 5.4 on a server running VMWare Server 2.0. I need to install Acronis 10 Linux Agent (latest version). My kernel version is 2.6.18-164.11.1.el5. I already install Acronis Agent. Compile kernel for module snapapi26 0.7.47.When I reboot machine it starts correctly, but when I connect to it from my Acronis Console running on host machine, Centos freeze and keyboard led start blinking.
View 16 Replies
ADVERTISEMENT
Dec 1, 2009
I'm quite new to Linux and totally new to CentOS. I need it to isntall a Lotus Domino Server, and for security reason i'd like to install the Acronis Linux agent to backup this server with my Win Acronis enterprise server. I have installed a new CentOS server 5.4 on a Vmware virtual machine, then installed the Acronis Linux agent following the instruction here [URL].. The agent seems to work because with the command "/etc/init.d/acronis_agent status" the sistem respond with "Acronis Agenti is running"
But i can't connect to the agent from the server console!
I have disabled the firewall to avoid any connectin problem...
Does anybody use acronis with CentOS?
View 8 Replies
View Related
Aug 4, 2010
Problems with xen 3.1.2 creating and installing domU CentOS 5.5 I am trying to do a virt-install --prompt --paravirt, and the install error out while trying to download install RPMs. I have googled for xen centos virt-install and various permutations. I have found similar howtos for 5.4 and 5.3, but they resulted in the same outcome. I did find several posts with similar issues, but no solution was posted.[URL]..
View 4 Replies
View Related
Aug 31, 2010
My issue is: I am "locked" on kernel 2.6.18-164, I just can't get my server up and running with any later release. It simply hangs at "Starting udev".
The hardware is:
MB: Asus M2N32-Deluxe
CPU: AMD Phenom(tm) II X4 920 Processor
Boot FS: Ext2
RootFS: xfs
RAM: 4Gb
I have 2.6.18-194.el5 running on other machines.
PS: I'm about to install/update a fresh 5.5 disc for testing purpose anyway. I'll update here if it works.
View 3 Replies
View Related
Feb 4, 2010
I've installed Centos 5 on 2 serveurs.The first one export the file system with NFS.The second one use amd to automount the filesystem with the link/net/@IP/Shared/folder/On the client side, I mean the second server, there is some logs into the messages system telling us the the process gam_server as crashed (segfault)On the first one, sometime, NFS Freeze, and nothing is available. This need a Hard reboot of the server in that case.
View 5 Replies
View Related
Jun 16, 2011
i would like to upgrade my centos 5.3 with the oldest update from repository. (about 224 update)I would like to update all the system but keep freezed php and mysql.
View 2 Replies
View Related
Apr 25, 2009
I have a problem with the VMware Workstation 6.5.2 build-156735 on CentOS 5.3. When I start a VM then, after 10-20 minutes the machine and VMware Workstation freeze. The mysterious thing was, after the freeze a large of folders from my two partitons were lost. ( I have two partitons on a NVIDIA Raid,configured with dmraid.) But the partitons still here, I can see them and they are mounted. Its very mysterious.
I have installed the VM's to a folder on my raid. When I killed the processes and restart VMware Workstation I cant start a VM.
VMware says that CentOS 5.3 are supported for the VMware Workstation 6.5.2 build-156735.
View 6 Replies
View Related
Jul 1, 2010
I'm installing Centos 5.5 32 bit and after the reboot and during the install the keyboard and mouse freeze up. Why? No way to correct except reboot and it freezes again.
View 1 Replies
View Related
Aug 7, 2011
I have my DNS configure in 2 zones. 1 internal, and the other external. DNS is chrooted under /var/named/chroot amd has been operating without any problems for well over 2 years now. I have recently run cross the problem shown in the subject line. When I try to freeze the internal dehnert.com zone with the following command...rndc freeze dehnert.com IN internal
I get the error...
I have been running the command as root, and with iptables turned off, so there is no firewall to restricting access. (the system sits behind a firewall) I have been searching the forums all over, but I havent run across what might be causing me to have root denied access. If anyone has seen any problem like this, please point me in the right direction so I can iron this out.
My named.conf is as follows...
View 1 Replies
View Related
Jun 13, 2010
I'm a long time user of CentOS 5 w/KDE 3.5. I have always had this problem to various degrees no matter what installation of CentOS 5 I'm currently on. This same hardware does not exhibit the same symptoms with another OS.The problem is I regularly have many konsole instances open. I alt-tab between them frequently. Inevitably a random alt-tab will freeze the keyboard and the mouse won't be able to click anything although I can move the mouse cursor around. I can't type anything. It seems to have some sort of timeout and it always come back to responsiveness.
I alleviated this problem (I think) by switching keyboards, installing the nvidia driver instead of the nv driver, shutting down all non-essential services.I have seen these symptoms on every system I have installed CentOS 5 where KDE 3.5 was also installed. Very different hardware setups each time.Has anyone else run into similar symptoms?I'm surprised that it's just CentOS 5 w/KDE 3.5 that exhibits this behaviour on the same hardware where other operating systems (gentoo, suse, etc.) did not exhibit these symptoms.
View 1 Replies
View Related
Jun 24, 2009
I have one desktop PC I'd like to use as a jukebox. It's installed in the basement as a black box, with only SSH access, and it has got a minimal CentOS 5.3 install with MPD and NCMPC. It's connected to the hi-fi in the basement, so I can stream music to it when I'm downstairs. Since I didn't want to use cables everywhere, I bought a PCI wireless card, with a RT2561 chip.
Until recently this card worked OK with Linux. Recent kernel version even have out-of-the-box support for it, except of course you still have to download the firmware from the Ralinktech website.
I gave the thing a static IP configuration by editing /etc/sysconfig/network-scripts/ifcfg-wlan0, interface went up fine, I can ping the machine and SSH into it OK. Now the only problem is, when I do a shutdown -h now, the machine "hangs" while trying to bring wlan0 down. (In case you wonder: I temporarily attached a monitor to it, since wanting to know what goes on while shutting down in an SSH session is a chicken-and-egg situation :)). I actually have to hard-reboot it (by pressing RESET).
View 1 Replies
View Related
Feb 27, 2011
I've faced the problem with server freeze on heavy write.
System
CentOS 5.5 x64_86 with latest updates and kernel (2.6.18-194.32.1). Also tried 2.6.18-194.26.1 and 2.6.37-2 from ELRepo with the same results.
CPU: Intel(R) Core(TM) i7 CPU 920 @ 2.67GHz
Memory: 3 x 2Gb DDR3.
HDDs: 2 x Western Digital WDC WD1002FBYS-02A6B0
[Code].....
View 19 Replies
View Related
Feb 18, 2010
I am trying to install CentOS 5.2, and the installation ran out of disk space after running for about 2 hours.I checked the FAQ, and it said 1.2 GB. The disk is 3 GB. The default install was selected, and I think that it checks for sufficient available disk space before installing. Still, it ran for quite a while before announcing that it was out of disk space.The Installation Guide is not very helpful, since there is a blank page where the disk space requirement is supposed to be. I just picked the default installation. A search of the forums on "not enough disk space" did not return much.
View 13 Replies
View Related
Jun 14, 2010
i am trying to install centos 5.5 x86_64 as a guest OS in vmware server 2.0.2 using netinstall iso. Installation runs fine until the point, when it tries to install selinux-policy-targeted-2.4.6-279.el5.noarch, the whole virtual pc hangs at this.any ideas? i tried to google few things about this, but i have found nothing. this has happened 3 times in row, whole virtual pc always hangs at the same package. i dont have any other problems with vmware, gentoo runs and installs fine in it.i would prefer to do installation using netinstall.iso, it would take a lot of time to download all cds or whole dvd and all i require is a very basic set of packages.
View 7 Replies
View Related
Jul 29, 2011
I am trying to install Centos 5.6 on a motherboard with a built in Marvel 88SE61xx drive controller.NO drive arrays are configured using the Marvel BIOS configuration utility.During the install CENTOS displays loading MARVEL_PATA driver and it waits and waits and waits.Looking on one of the system message screens I get the following types of messages:qc timeoutfailed to identifyI/O errorLink is slow to respondSRST failed errno=16ata4: reset failed - giving upAny ideas as to how to get CENTOS to recognize the drives connected to the motherboard Marvell controller on a NON-RAID configuration?
View 1 Replies
View Related
Sep 19, 2010
3 partitions (in order): Windows 7, CentOS and shared data partition.
I need to increase the size of the Windows 7 partition (c:windowswinsxs seems to be something not easily remedied).
GParted didn't work in moving things around (bad sector) so I wiped out its partition (# 2 out of 3) and I was able to increase the size of the Windows 7 partition (I can reinstall CentOS easily and not much work lost).
Except ... no more grub menu (unsurprising). This incantation does allow me to boot into Windows 7.
Is there any way of rebuilding the grub menu short of reinstalling CentOS (5.5)?
View 2 Replies
View Related
May 9, 2010
I am trying to clone the hard drive to a slightly smaller hard drive in the same computer, same setup.What software or commands do you use to clone the entire system and resize the partition automatically?The original HD is a little larger than the destination HD. The source partition only has about 20 GB in use and the rest is blank.
I have 2 partition, a small 100MB boot partition and another 500GB LVM partition.I can't just clone from the original disk to the new disk. (for another long reason) I need to make an image of the original disk on an external USB drive first, then move that image onto a new disk.I have tried creating an image of the whole disk with Clonezilla, but then the restoration didn't work because the target drive is smaller than the original.
View 7 Replies
View Related
Mar 28, 2009
I am trying to install CentOS 5.2 on an HP rp5700 desktop unit. These units were originally sold as a Point of Sales unit I believe, but HP also markets it as a high life cycle server for SMB market.I tried to load CentOS on this unit via CD (created from downloaded ISO of course). It presents the initial CentOS banner page and waits for the obligatory "enter" to continue. It begins the boot process up to discovering the PCI stuff and just locks up, no response. I have to power down to restart.Since this does not even get to the point of installing. I am at a loss what to do next. Has anyone had a similar issue with other PCs.The boot stops at the lineACPI: PCI Root Bridge [PCI0] (0000:00)
View 3 Replies
View Related
Mar 18, 2009
I installed centos 5.1 in my system, it installed perfectly, but when I am trying to install centos 5.2 then it is not let me install.
My system has 220 SATA HardDisk Intel Core 2 Duo 4 GB RAM Intel Desktop Board DG41TY when I try to install centos 5.2, it show me menu bar After hit enter key to install centos 5.2, it show me loading usb drive and then showing some strange font. System is hang after this Can you please tell how I install centos 5.2
View 5 Replies
View Related
Mar 21, 2009
can anyone know how to install the compiz-fusion desktop theme on centos-5which is very great experience and fun, like Macos X like look and feel.
View 1 Replies
View Related
Dec 4, 2009
I download the xxxx.tar.bz2 file
extracted it,
when i run ./configure under the directory i get the following error code...
i even followed the link http://wiki.winehq.org/WineOn64bit
also http://forum.winehq.org/viewtopic.php?p=28622&sid=17383eb0b922b2c230238f9ab50b265a. and several googling.
i think the architect of the OS and the wine is not matching.
So guide me to solve the above problem.
the output i get on "uname -i"
x86_64
View 3 Replies
View Related
Oct 1, 2010
i am trying to install this printer on my centos installation and could not i have the drivers but cannot install
View 1 Replies
View Related
Jul 5, 2009
U have spent 4 days trying to configure my router thinking that it is my router that is not working but when I go to my dynamic dns or my static ip address it takes me to my admin router on the local computers.when I type httpd it says it cannot bind to port 0.0.0.0:80 i checked it is set up to listen to port 80 this is really confusing me i am beginning to think the people who built my server did not set it up properly if i go to localhost or 0.0.0.127 it goes to the apache default page fine.I have not changed anything since it wad installed except the centos 5 updates any ideas?When i login my password is root and the password is the default I have changed nothing else on the system as I still have no clue about it.Just to clarify on my router I have port 80 and port 443 set to my static ip address is this correct or should it be the eth0 Bcast ip address?Can anyone give me an idea of what i need to check? On my router I have set up port 80 and port 443 and dynamic dns and static ip address.Sorry I am totally new to linux never used it before would be nice if anyone has any ideas how i can proceed with this.
View 1 Replies
View Related
Aug 26, 2009
Once i install the centos in my mac pro, it ask for reboot after completion, and on reboot it does not see the hard drive with centos in it.
Any clue to get around this problem?
View 1 Replies
View Related
Feb 26, 2010
Installation CentOS 5.3 on server HP Proliant ML110 passes without problems. At installation I choose breakdown of disks by default.All is established without problems. After reboot HP stops. Last message on the screen the such:
Filesystem type is ext2fs, partition type 0x83 kernel /vmlinuz-2.6.18-92.el5 ro root=/dev/VolGroup00/LogVol00 rhgb gniet
[Linux-bzImage, Setup=0x1e00,size=0x1b7034]
initrd/initrd-2.6.18-92.el5.img
[Linux-initrd@ 0x37cf5000,0x2fa44c bytes]
Further loading does not go. It is probably connected with RAID a file? On HP it is adjusted hardware SATA RAID1 Embedded. In what a problem?
View 2 Replies
View Related
Aug 18, 2010
Is it possible to alter questions to the CentOS installer?
eg/ it could ask what platform you're on, instead of what packages you want to install, and it would then perform a function (eg/ installing drivers) based on the platform (be it dell etc.)
Is this possible and can anyone point me in the right direction to accomplish this?
View 3 Replies
View Related
Sep 25, 2010
There is a way to have a CentOS installation very very minimal?Not like Damn Small Linux, but similar (as footprint)My need is create some Virtual Machine that only have BIND and SSH on it.
View 2 Replies
View Related
Feb 9, 2011
I am in the process of building a new server on an Asus P5QPL-AM motherboard and an Intel E8600 processor.explain to me the difference between the two versions and what would you recommend.Also, is there any advantage of SATA over IDE hard drives?
View 1 Replies
View Related
Apr 1, 2011
Firstly I've never (successfully) upgraded before using update manager -d but I've only tried once. I'm on 10.10 at the moment but I want to make a full disk backup using Acronis and try out 11.04 beta 1 so if I can't boot (like with the 11.04 Alpha 3) I'm ok.
What I want to know is if I upgrade to beta 1 it will install new things and settings, if beta 2 is released and I upgrade to that (after having beta 1 installed) will it overwrite all the settings again? Or will I be able to spend time set beta 1 up nice how I want it (if it works) and just smoothly upgrade gradually to final 11.04 keeping it pretty much exactly how I want it?
Also with the software sources, I understand I need to disable the ones I manually added before updating from 10.10 then to re-enable them, but how do I re-enable them for Natty as they are currently for Maverick? Do I just change the word Maverick to Natty, or is it better to remove and re-add them for natty? And do the authentication keys need updating or are they ok? I don't really know a lot about the keys.
1 more thing (sorry) will an upgrade overwrite any settings I have e.g. etc/fstab, sudoers, things like that? I know when you upgrade it gives you an option for some things e.g. keep or replace, if I keep old settings from maverick does it matter? Or does 11.04 add new lines/things to these files if I choose replace?
Sorry for all the questions, I'm pretty new been using ubuntu as my only OS for couple months now and most of my time has been spent tweaking settings and I don't want to lose them, or do a clean install when 11.04 final is released as I won't ever be able to remember them all.
View 7 Replies
View Related
Nov 25, 2010
I have a quick question. I want to install CentOS as a part of Guest OS on my Hyper-v Main hardware node. It is because I want to start providing linux based VPS to my customers. I am searching around in Google to get module/tool from which I can automate the installation of CentOS 5. But, I could not get much information from Google. So is there any automate tool available in CentOS like sysprep in Windows from which I can automate the installation of centos without giving answers of installation manually?
View 1 Replies
View Related
