I'm installing Centos 5.5 32 bit and after the reboot and during the install the keyboard and mouse freeze up. Why? No way to correct except reboot and it freezes again.
View 1 RepliesI'm a long time user of CentOS 5 w/KDE 3.5. I have always had this problem to various degrees no matter what installation of CentOS 5 I'm currently on. This same hardware does not exhibit the same symptoms with another OS.The problem is I regularly have many konsole instances open. I alt-tab between them frequently. Inevitably a random alt-tab will freeze the keyboard and the mouse won't be able to click anything although I can move the mouse cursor around. I can't type anything. It seems to have some sort of timeout and it always come back to responsiveness.
I alleviated this problem (I think) by switching keyboards, installing the nvidia driver instead of the nv driver, shutting down all non-essential services.I have seen these symptoms on every system I have installed CentOS 5 where KDE 3.5 was also installed. Very different hardware setups each time.Has anyone else run into similar symptoms?I'm surprised that it's just CentOS 5 w/KDE 3.5 that exhibits this behaviour on the same hardware where other operating systems (gentoo, suse, etc.) did not exhibit these symptoms.
The mouse, and keyboard, freezes at random times? When I search the discussion boards for a solution to this problem, it is overwhelming to see how many others are having the same difficulty, yet I haven't come across specific solution(s) to the problem. (One posting has over 180 pages of comments!) I am still using Jaunty but would like to move up to 10.04, which I have installed on a separate partition. Unfortunately, that partition can't be used by my family because it freezes at random times! Naturally, I am unable to get any more updates with Jaunty. (I never had problem with Jaunty freezing.) Incidentally, I tried Linux Mint, which was a adaptation of Ubuntu 10.04 and had the same problem.
View 7 Replies View RelatedI've upgraded my ubuntu from 9.04 -> 9.10. But after reboot, my mouse & keyboard become freeze. I did some search and found some advice about mannauly configure /etc/X11/xorg.conf but unsuccess.
Here are some log
toannc@vt_ttpm_rd_toannc5:~$ uname -a
Linux vt_ttpm_rd_toannc5 2.6.31-20-generic #58-Ubuntu SMP Fri Mar 12 05:23:09 UTC 2010 i686 GNU/Linux
toannc@vt_ttpm_rd_toannc5:~$ lspci
00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller (rev 10)
00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
code....
I am running Ubuntu 10.04, randomly while working in gnome with no particular application I get a freeze periodically. Neither the mouse or the keyboard will respond. I am running it on a lenovo Z61m laptop. I have had previous experience with Posix systems but I am a recent migrant from XP as my primary operating system. I never had such an issue with this computer which leads me to believe that it is not a hardware issue.
View 1 Replies View RelatedI have a problem with mouse and keyboard. Both freeze within 30sec to half an hour after logging into squeeze 64bit (using gnome). My hardware is Asus P7P55D EVO (tested with linux according to ASUS) with Intel i5 760 CPU. I use IBM keyboard and Trust PS2 mouse. I also have MSI HD4350 graphics card, that was at least listed on Ubuntu to be supported, worked fine also with Lenny.
When using same combination with Lenny (64-bit) I never found any problem with either keyboard nor mouse, even running long nights. However there was need to upgrade to Squeeze since it has newer kernel supporting the sensors on board my MB. I used same mouse and keyboard also on Ubuntu 9.10 and had never problems. However when I upgraded to new MB I started with Ubuntu 10.04 64 bit version and experienced same keyboard and mouse freeze as I have now in squeeze. Only way out from this status is hard reset using PC reset button.
I connected with putty to my linux box and found following (while the linux box was on frozen state) from dmesg on keyboard: :/var/log$ dmesg | grep -i keyboard [ 1.064628] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
Multi GPU - Mouse and Keyboard Freeze once enabled Previously on Ubuntu Karmic I had multi GPU setup without a problem.System consists of three ATI radeon HD 3600 series (multi head) running 6 monitors.
Setting it up was was easy as on Microsoft windows. All I did was download the ati catalyst and issue the following command: aticonfig --initial=dual-head --adapter=all
That created the perfect xorg.conf. With the amdcccle desktop, I then rearranged the monitors around to my setup and enabled xinerama. I thus had a total of six monitors working without a problem. (Naturally with compiz turned off).
- UPGRADING TO LUCID BIGGEST MISTAKE -
Yesterday the update manager popped up Lucid Ubuntu 10.04 Release available. I upgraded. I got the same issue of fglrx.. Reading through Forum I deleted the /usr/share/ati folder. uninstalled the catalyst. Rebooted in safe mode and then re-installed via synatic fglrx and amdcccle. All went well.
I then issued the basic command.
aticonfig --initial -f
This created the standard xorg.conf. On rebooting machine. My first two screens (off the first Radeon HD 3600) worked fine, without a problem. (See attached file)
I then issued
aticonfig --initial=dual-head --adapter=all.
This created the long xorg.conf file for all the cards on the system to work.
BUMPER !! Machine reboots and right before the X login screen appears all of a sudden my monitor screen goes into "Digital Power saving mode" and the monitor goes to sleep. Keyboard and Mouse are not responsive (All freeze). No alternative but to cold boot the machine and restart.
I have tried everything, each time mouse and keyboard just freeze.
I downloaded and burnt the Kubuntu 10.04 release to a CD. I tried to install it. First time, couldn't find the disks and eventually it froze. Ok, second try, when it's contacting the "time server" (or whatever) another freeze, but this time I notice everything is running fine and then get a nice little image with the current time (increasing seconds and all). Third attemp, clicked the "update this installer" and it went fine. "Yay!" I thought. Well, a few minutes in my beautiful 10.04 system and again, another freeze. Hit the power button and to my surprise a "Shutdown" dialog shows up with a countdown. After 30 seconds it logs out and mouse is working again. I log back in and come here to write this long post, and as I was writing the title "Random mouse/ke..." guess what? Yeah, it froze again. And the little bar that goes after the writing continued happily blinking. Hit the power button but this time mouse and keyboard were still frozen in the login screen.
Short version: mouse and keyboard randomly freeze while the rest of the system apparently work fine.
I have Ubuntu 10.10 Desktop Edition i386 version. It was recently working fine until i installed few updates that showed in Update Manager about total size of 200Mb. During the installation BUG USB (blue screen) error comes and laptop restarted. Now i restarted the laptop and from now my mouse and the keyboard not working. I am not able to even login to the system. Not working now anything.. Details: I am running Ubuntu 10.10 Desktop i386 on VMWare Workstation on Windows Vista.
[Code]....
I've just installed CentOS-5.4 on an AMD64 box, dual boot with Windows 7 64, if that matters. At first I could not get the GUI to display at all, but fixed that using system-config-display. During installation, the keyboard (HP bluetooth set with mouse) worked fine in the GUI, but mouse did not. Now when it loads the GUI interface after booting, neither the keyboard or the mouse will work at all, therefore I can't navigate anywhere. I have done the yum update already as well, from init 3, but they still are not working. what I should do next, where to check?
View 5 Replies View RelatedI installed Centos 5.3 x86_64 and jumped out to me the problem with which I cannot manage.
After about 10 minutes from the start of the system becomes detached to me the monitor, the keyboard and the mouse.Itself system in himself works and I have a possibility to connect myself across ssh or else mappings of disks.
Ive got a ClearCube Blade server installed with a mirrored clone of a Centos 5.4 system. Running X with GNOME. Upon starting the new blade, i find that I am having issues with the keyboard and mouse. When I plug in USB mouse and keyboard directly into the blade they work fine. When I hook the use mouse and board to the cport kvm, I don't even get any power to the devices. If I plug in ps2 mouse and board through the kvm, I get power and can use them in the bios but once Centos starts to load, they go dead. I have changed the kvm 3 times with new kvms, and I spoke with the manufacturer there are no incompatibilities with the hp mouse or keyboard or any reason why the usb ports wouldn't be working on the kvm for the devices.
View 7 Replies View RelatedI just install CentOS 5.6 on my computer. My mouse and keyboard stops working in 2 cases: 1. copy files from usb (FAT and NTFS); 2. update my system (specifically, when downloading update packages). But the system's still working. It seems weird but I can do nothing but reboot every time.
View 3 Replies View RelatedI have downloaded the latest Ubuntu.iso and extracted it to /tmp/ubuntu/ on my laptop. In the folder isolinux there is an isolinux.cfg file. I am trying to prepare a USB stick by modifying those files, so that when I boot from USB it opens VNC and puts a static IP of 192.168.1.125. How can I enable VNC and a static IP so that from my laptop I can do the installation of Ubuntu 11.04 without using a keyboard or mouse?[URL]..
View 1 Replies View RelatedI have a weird situation. After installing openSUSE 11.2 on a machine it has no response to the keyboard and mouse. I then installed Mandriva 2010 on the machine and the keyboard and mouse work.
View 7 Replies View RelatedI just installed the new OpenSuSE 11.2 release and after coming up in graphical mode the keyboard and mouse are not responding at all.
After that via a remote login force the machine back to runlevel 3 and this makes it able to login to the console and trying to start sax2 to make a new X configuration.
Well it doesn't read the old configuration but gets stuck as well.
The install was an update from OpenSuSE 11.1.
I am quite experienced in installing openSUSE. (I used it for many years.) But the problem showed below tricks me out.
I just tried to install openSUSE 11.2. In initmode 3 the keyboard works well. Everything worked well up to the moment I started runlevel 5. In XWindows Modus, the keyboard and the mouse are disabled. And I cannot get back to any other Virtual console.
When I started sax2, I get something (in the file /var/log/Sax.log) or both mouse and keyboard like this:
It indicates , mouse and keyboard are disabled.
Here are my questions:
How can I ENABLE my keyboard and my mouse?
Where is the file that configures sax2?
Do I have to set ("on") the AutoAddDevices? or to "off"
I have just update from 11.1 to 11.2 and after reboot system hangs when arrives to the screen where all users logins are showed. I run the installation again in repair mode. Everything correct. Started system again in Level 3, login as one of the users and run startx. It starts the desktop but no keyboard or mouse is working. Started system again in level 3, login as root, started gdm and same results. It arrives to the login screen for the different users and keyboard and mouse does not work. System seems to be running as clock in the right down works.
Started system again in Level 3, login as root, run SaX2 and same results: no keyboard no mouse. I am running gnome desktop with last image downloaded openSUSE-11.2-DVD-i586.iso. it seems to be something related to bug in OpenSuse 11.2 Milestone 7: (Bugs:Most Annoying Bugs 11.2 dev - openSUSE) HAL may crash, leaving XOrg without keyboard and mouse (Bug #537452), work-around: update with 'hal' package from Base:System
On our SuSe 11.1 PC keyboard and mouse are no more responding although it did work properly until yesterday. We shut down the computer yesterday evening and today they do not work anymore. But it is not a hardware problem, we can use keyboard and mouse until Grub bootloader, but as soon as we start a Linux session (doesn't matter if normal or failsave mode) the keyboard and mouse are disabled, we can see that because the NumLock and CapsLock LEDs are switched off immediately.
We have no idea what happened. We booted from CD into rescue mode and mounted the hard disk manually and checked some logfiles, but the boot.log tells us that USB keyboard and mouse are detected, as well as the Xorg.0.log file. And we found no indication that keyboard or mouse are disabled or something like that.
Today I installed openSUSE 11.3. I finished downloading updates, and restarted. I can get through the grub menu fine, but after that my keyboard and mouse fail to respond. On my windows partition(which is where I'm writing this) my keyboard and mouse work fine. If it matters, they are the Logitech Wireless EX100 keyboard and mouse set.
View 5 Replies View RelatedI just bought a Fujitsu Esprimo P1500 computer with Windows 7 Home Premium. When I try to install OpenSuse 11.2, the keyboard works in the first screen, so I can select "Installation" with the arrow keys. But when the next screen comes up (select keyboard etc.), neither keyboard nor mouse work. Well, the CapsLock and NumLock LEDs light up, but that is all (and hitting the corresponding keys does not turn them off.)
View 6 Replies View RelatedI recently installed suse 11.2 on my system and during the install the keyboard (Microsoft internet keyboard PS/2) and mouse (Microsoft optical mouse USB with scroll wheel) worked perfectly, but once I reached the login screen they both became unusable.
I also tried rebooting into failsafe mode but once reaching the login screen the same happened again, the only key that seems to work is the 'F Lock' key and the optical light appears on the mouse.
I had a normal OpenSuse 11.1 setup, along with Windows XP, swap partition and /home partition. After my hd began failing (badblocks), I cloned the system to a different location (using ddrescue), updated the hd with a new one (bigger), made new partitions on the new hd (preserving the old locations, ex: /dev/sda1 ext3 on old hd still is /dev/sda1 on new one, but made changes to the partitions sizes to make them bigger), recovered all the clones to the new hd, fsck'ed them, recovered grub with install dvd then tried to boot.
On the first boot, it failed to mount / (/dev/sda1) and gave me a command line. I checked /etc/fstab and saw that, on the old setup, it was mounting the partitions based on the HD-id, which obviously changed. I fixed that to use /dev/sda1, /dev/sda2, etc. Now, the systems boots fine. But, when I get to the graphical login part, the keyboard and the mouse don't work. It's a Dell Inspiron 1525 notebook, now with a 320gb samsung hd.
Ubuntu 10.04 64 bit, GNOME desktop. Previous install (same OS) gave an error when switching users. Did a fresh install, and now the keyboard and mouse freeze. This happens almost every session. I have to force shutdown. Sometimes it happens in 5 minutes, other times it happens in 4 hours. I don't want to sound like a jerk, but the Ubuntu problems are starting to get to me. I really want to use this. I like it, but I'm getting frustrated. 9.10 had wireless problems, and now I'm getting this freezing thing. Both the keyboard and mouse are USB connections. Everything else works when the freeze occurs, i.e., video's still play, web browser is still displaying gifs, etc. Only the mouse and keyboard freeze. All other operations seem normal.
View 3 Replies View Relatedsimilar issue to Keyboard and mouse deactivated while installing - openSUSE ForumsI am installing from OpenSuse Linux 11.2 DVD. After I hit install, the screen with keyboard layout choice comes up, but neither my mouse nor my keyboard work on that screen (they did work until that screen)I have Vista and Win7 installed on separate partitions. My keyboard is a logitech S520 and mouse LX5, both wireless, connected to a USB portI did try to connect a wired keyboard and mouse over USB (front ports), did not work.
View 9 Replies View RelatedI'm having trouble installing F11 x86_64, and I'm sure it is something to do with the video card.X will not even start if I have both nvidia quadro FX1700's installed. If I take one out, I can install F11, but it always 'hangs' when it starts X (which is to say, both the keyboard and mouse are locked - until I press the power button, but then it shuts down anyway).I've fiddled inittab so it starts in runlevel 3 so I can at least get in and tinker. There is no xorg.conf in /etc/X11, so I assume the system is building it's own and not quite getting it right (guess work based on other threads with similar symptoms).
I can connect to the system from another Linux machine via ssh, and I can ftp to it. I tried copying the xorg.conf from the other machine, but while it changed the screen resolution (ergo, it had some effect), it still went nuts. Starting X remotely via ssh allowed me to trap the messages, which indicate the lack of HAL has something to do with the problem.service --status-all reports hald stopped; I'm assuming this should not be the case. I've used yum to reinstall hal, but that made no difference. Nor did an update - it was already at the most recent level.F11 was installed from a DVD downloaded vai a bittorrent; the disk checked out ok.
My knowledge is limited, and I don't know what should be in xorg.conf for my machine, although I could type it in from scratch or ftp it across from here. It was 'okay' under F10, happily tolerating both video cards. But it seems to be sulking under F11. In case it matters, I'm doing everything as root; since firstboot starts X, I can't use that to create another userid.
- nomodeset, xdriver=vesa, selinux=0, remove rhgb as boot parameters - all to no avail (although these changes seem to be ignored for the most part anyway);
- start the HAL daemon manually (mine failed to start, as others have reported). It didn't like that! (the output is available, but is enormous)
- startx -configure - simply failed;
- dirconf didn't work;
- I've tried swearing at it during start-up, which turned out to be no more or less successful than anything else, but it was fun.
Intel Q6600 64 bit. Twin nvidia Quadro FX1700 cards (one removed for the time being) driving two 1920x1200 monitors each. Please let me know if there is any other relevant information I can supply.
Was running out of room on / and set in Yast to delete /tmp on startup. Also deleted /var/log and /var/tmp while logged in. Rebooted and now mouse and keyboard (both USB) not working. Keyboard works on grub menu. Also works now in XP. Tried reconnecting (sync & plug unplug) different usb ports and nothing. Gave it a few minutes on startup and still nothing. Plugged in a PS2 keyboard and the lights just blink after startup and it will not work either.
View 7 Replies View RelatedI know that in previous versions of OpenSuSE one could be in front of the screen/KBD/mouse get things started, and log into another session and get things started there and run some apps, and so on. Now with OpenSuSE 11.x I see no means in which to do so. Is there another way? Point being is that I want to run one application as one user session and another application in yet another user session. Either one I can get to by switching user accounts at one screen/kbd/mouse. Or through VNC. No need to run something like xen or VMWare and incur additional overhead. (It is next on my list to try though.
View 2 Replies View Relatedanyway the reason for my posti downloaded a network install of wheezypartitioned and loaded wheezy on to a dell latitude d600now after installation the keyboard and mouse ( touchpad or nipple ) do not functionsince this inconvenience i have been plugging in a usb keyboard and mouse at the graphical login then using them to work the laptopAfter a reboot the usb peripherals do need to be uplugged and reconnected otherwise they also do not functioni am obviously missing something vital here but i am not sure where to start, kernel 2.6.38.2-686
i have loaded the non-free repos added the various firmware files etc. to get wireless and bluetooth to functionbut the keyboard and mouse has me stumped i have searched the forum and google but haven't come across anyone with the same issue.Some forum suggestions have been to reconfigure xorg.conf but this does not exist on this installevdev - the event driver is thereudev - the kernel device manager is also there
I have installed VMWare server 2 on a windows XP host. Then I installed Suse 11.2 on the VMWare server. For the most part everything seems to be working Ok. However, the key board will type two letters with every keystroke. I have used the the accessibility options to force a hack fix (slow keys). Also, the host pointer looses synchronization with the guest. Simple fix, running it off the screen forces VM to synchronize.
I have managed to find work around solutions, but overall it is annoying and effects my productivity (IE Ctrl+C takes about 2 seconds to register!!!). I would like to find better solutions. So I am looking for advice on how I could address these issues, I need advice on two methods:
1) Assuming the problems are within Linux, I will need to tweak/change the drivers for my mouse and keyboard, how would I do that?
2) Assuming the problem is with VMWare Tools, I will need to tweak/update the tools. Now, I have noticed that Suse has their own custom setup for the tools. Thus the documentation for tweaking the tools doesn't apply (ie cannot find vmware-tools-config.pl). So how would I go about playing with that side of things?
3) Ruled out the problem being with VMWare itself. Whenever I run the system in command line mode, or in the graphical installer, the keyboard works fine. It is only within KDE that the problems arise. Thus it is either X-Windows/KDE or the VMWare tools layer that is causing the problem. So my next question, is there a way of turning components off and on to narrow in on what component is causing the problem?