OpenSUSE Network :: Setting Up Single Sign-on/login Sync?
Aug 2, 2010
Does anyone know of a good tutorial for setting up single sign-on/login sync over a pure Linux network without any AD boxes in it? I have read this can be achieved through LDAP+Kerberos+PAM...I have these installed on a server...the users and groups on the server is configured to use them and a client has been pointed toward the LDAP server and has Kerberos enabled and users and Groups set to use the LDAP server as a backend.
I expected to see the users and groups list from the server show up on my client, or at least be able to login on the client as one such user. Am I misunderstanding what I read or am I just probably misconfiguring everything? My ultimate goal is for my clients to authenticate against my server and not have to sign in again when using server resources (Samba shares etc.).
I have read that NFS and NIS are old technologies that are going by the wayside and that Samba, LDAP authentication and such are overall better and more secure...What are everyone's thoughts on this? My network is just a home network so security isnt really a big problem...im just trying to set it up like a corporation with my limited resources would for the practice and education of doing it.
View 3 Replies
ADVERTISEMENT
Jan 24, 2011
configuring single signon using ldap
View 1 Replies
View Related
Jan 24, 2011
Setting up a single signon using ldap server ?
View 1 Replies
View Related
Apr 2, 2010
I dont know were to begin to solve my problem and I have been googling for hours to get a hint without any success. I'm runnning a Counterstrike Server on my virtual openSuse server - I'm exploring so don't justify what I am hosting at the moment
I want to make it possible to gain access to the cstrike folde via a ftp login. But I really have no idea were to start. The server is also a webserver, where I can ass FTP accounts for my apache vhosts via plesk - but I dont think this is the solution of my problem, isn't it?
View 2 Replies
View Related
Jun 8, 2010
I've been surfing and googling for a while trying to figure out how to set up my PC running Fedora 13 to connect to Windows AD using Single Sign On services. I couldn't find any guide or tutorial or anything. I believe I'm not the only case when the company is running Windows AD for authentication.
View 2 Replies
View Related
Nov 17, 2010
I am running 11.3 with Remote Admin(VNC) turned on. This has installed TightVNC.I also have also enabled xinetd to manage the startup of new (incoming) VNC requests.All this is working just fine. So, what's the problem, you ask? Its that missing Shift+3 symbol. To reproduce, I run TightVNC (viewer) from a variety of clients (Win & OpenSUSE) to a number of OpenSUSE servers with xinetd managed VNC services enabled. The Xvnc sessions start and the clients display the KDE log-on screen. You will notice that in the username field that the sign is not displayed.
I have run a parallel VNC service (is it Xvnc or vncserver?) which gave me a twm session. It also is missing thesign, so I conclude that it is not KDE that is causing the problem?Secondly, a scan throughog file produced by the parallel VNC service shows:Code:KbdAddEvent: unknown KeySym 0x3a - allocating KeyCode 92 Has anyone any suggestions on how I can get my pound sign?
View 5 Replies
View Related
Dec 10, 2010
I have 3 computers. One running openSuse 11.3 with SAMBA and the other 2 are Windows 7 Professional boxes. I have the same user name and passwords for all three boxes.
From the Linux box I can access one of the Windows 7 boxes but the other won't accept my user name and password. The one that won't accept has Windows LiveID Sign-In Assistant installed. Apparantly that's an automatic install now.
I've read that there is a bug with the SAMBA libsmbclient [URL].
I tried updating via YAST but still end up with version 3.5.4-5.1.2 and this doesn't work.
View 1 Replies
View Related
Mar 4, 2010
Does anybody have any documentation or can assist with any sort of steps on how to install a SSO server on Centos 5.4.We have just over 150 Centos servers country wide and we would like to implement an SSO server to manage the users and their login credentials locally and centrally.
View 1 Replies
View Related
May 28, 2011
When I attempt to connect to a wireless network, the network manager asks me for the network's password, then says 'setting network address' for 20 or so seconds, then asks me for some random Hex or ASCII key in the same type of window I put the password in (Secrets for Noel -- KDE Daemon). Since a key is already typed into the window, I press OK, which then causes the network manager to go back to 'setting network address', then the window pops up again and keeps repeating itself.
I'm running Opensuse 11.4 with KDE, and my driver is ath9k. I don't know much about linux so please don't tell me to 'recompile this' or 'change this setting' without explaining how to do it. Please help, I've been unable to connect to wireless in OpenSUSE for 2 weeks now.
View 9 Replies
View Related
Mar 23, 2010
I have a problem my ubuntu is the latest distro but the shiftkeys are not working like when i whant an @ sign i cant make that sign the keybaord layout has been changed i even have done most of the solutions found on the site and no use.
View 1 Replies
View Related
Oct 24, 2010
I use jpilot on opensuse 11.3 64bit to sync pim data with my Palm Treo 680 via bluetooth. This worked fine until today. Now I get the following error message when I try to sync: Syncing on device bt: Press the HotSync button now dlp_ReadSysInfo error Exiting with status YNC_ERROR_PI_CONNECT Finished.
The last successfull sync was on the 20th October and today is the 24th October. I did not change any settings in jpilot or on my palm device. So I guess there must have been an update of opensuse which causes this error. But I do not now how to look up the updates during this period or how to undo them. Was there an update between the 20th and the 24th Oktober, which might affect either jpilot or bluetooth functionality?
View 1 Replies
View Related
Feb 20, 2010
when ever i try to sign in to my messaging system it gives me this message and wont let me sign in,< Received unexpected response from [URL] useTLS=1 is not allowed for non secure requests.>
View 3 Replies
View Related
Jan 25, 2011
On the 32-bit Netbook with Intel Atom running opensuse-11.3 I have ethernet broadband connection with dynamic IP.I have now bought a D-Link Wireless 150 Router DIR-600 and have initialized it on my other laptop on Windows 7 Home Basic OS. I now want this opemsuse Netbook also to have the facility. Please advise me what packages I shall install and what modifications I have to do in /etc/sysconfig/network/ifcfg-wlan0 or whatever else is necessary.
View 2 Replies
View Related
Aug 9, 2011
yesterday I met a colleague on the floor, who told me that after looking at the jailhouse theme of Suse 11.4 (I guess that'sa kind of curtain? it really is remarkably ugly) he switched to Ubuntu. So well, I won't go that far, but now I thought, let'sswitch the login-screen for something better.Okay, I go to System Settings / System Administration / Login Screen, tab Theme.Alright, there are six themes there, but I don't like them. Great, there is "Get New Theme"!Okay, I get one. But the list of themes doesn't change --- I would have expected, that the newtheme would now be automatically included. So well, a bit stupid, but apparently it wants youto explicitly include it: so I click "Install new theme" --- unfortunately, then there is no hintwhere the themes have been stored! Okay, I download another one, hoping that during thatprocess I will be told what happens. Alas, there was a chance for such enlightenment with KDE3.
but likely no longer with KDE4 (which seems to go the Windows route, hiding everything; with thelittle difference that under Windows the basic things actually work). So no hint where it stores theselogin themes. Okay, I search the Internet, find various possibilities, /usr, /etc, and ~/.kde, ~/.kde4, butin none of them can I find these themes! (I found the desktop themes, and I found the six themes which were already there,but not the new themes).So could somebody tell my where KDE hides the newly downloaded themes?
By the way, the information under "Help" seems either irrelevant or outdated (the directories mentionedseem false anyway).In general, I think most(!) KDE problems would be solved if KDE would be more "verbose", enlighten the userabout its actions (while on the other hand, at least KDE4 seems to have the goal of "never say anything").Thanks for your attentionFrustrated Oliver(Since September 2010 I try to become friends with KDE4, where I was really satisfied with KDE3.
View 7 Replies
View Related
Jan 21, 2010
I'm new to networks and servers, been using Linux on the desktop for a while now but always relied on the company's IT guy for setting up everyting LAN-based.
Now I want to build up my home LAN, and want to do it with Linux. I've managed to set up LAMP and file share servers.
What I am looking for is information on what I need, and how to set up a server for the following tasks:Centralized Username and Password, that when the user logs into any one of the desktops in the LAN, it uses this for authentication
Something that allows this authentication to be utilized in other servers (file access, web access, router logging, etc.). Something to make it easier for continuing permissions from one service to another. e.g. I have IPCop filtering content, and it has provisions for tracking who is making which request if there is authentication going on. (optionally) to run a script for mounting Samba shares or mapped network drives so from one system to the next. For example, in whatever box somebody logs in, it mounts a server share ("smb://Myserver/users/<username>") to a local folder ("my_user_share").
So;user "fred" ="smb://Myserver/users/fred" and user "wilma" = "smb://Myserver/users/wilma" but both would find their respective one mounted under "~/my_user_share". This would be irrespective of which box they are loggin in with. If the server share location changes (new server/servername), I change it on the server so the next time they log in it points to the right place.
I guess it is similar to Window's Active Directory, though I'm not sure what it's called, how to configure it and what it is and is not capable of doing.
View 2 Replies
View Related
Apr 21, 2010
I have a single NIC (eth0) and it has a single, static public address assigned to it. I would like to assign an additional private address (192.168.1.68) to the NIC to make accessing my router more convenient, but I'm having a little trouble. I'm not using the Network Settings module in YaST because whenever I've tried before it has usually resulted in my internet connection failing and being unable to remove the alias info I tried setting in YaST. So, instead, I'm just trying to do it by editing the configuration directly. I'm also using it as an opportunity to learn a little bit more about Linux. So far, all I've done is add an extra line to my /etc/sysconfig/network/ifcfg-eth0 file. Originally the contents of the file were as follows.
Code:
BOOTPROTO='static'
BROADCAST=''
ETHTOOL_OPTIONS=''
IPADDR='XXX.XXX.XXX.XXX/21'
[code]....
Naturally, this didn't work either. Can anyone tell me how to specify the gateway for the additional local address?
View 3 Replies
View Related
Jun 6, 2010
What configuration options in /etc/ntp.conf do I have to set to allow other computers to receive time from a ntpd server? I've tried removing "nopeers" and "noquery" from the restrict lines, but I can't see anything on port 123.
View 2 Replies
View Related
Aug 19, 2009
i'm following the tips from Samba and Suse: HowTo Set up an openSUSE-Windows Home Office LAN/Network. Versions 10, 11 to set up samba and tweak it to my needs.
View 9 Replies
View Related
Jan 25, 2010
I've just installed OpenSUSE 11.2 w/KDE interface on a HP Pavilion dv5-1010us laptop.Now we're trying to get the wireless to work. It's got a built-in wireless adapter, but we're not sure what kind of adapter it is. HP's Website is no help there. According to another site, it's an Intel WifiLink 5100. I did download the wireless driver from the HP site, but it's a .exe file. Anyone had any luck setting up this or a similar HP laptop. I couldn't find this model on the HCL/Laptops/HP - openSUSE page, but it seems OpenSUSE supports wireless other HP Pavilion models.
View 1 Replies
View Related
Feb 1, 2010
I'm trying to setup a media server for my Playstation 3 I've opted for the one off of this site PS3 Media Server now the installation instructions in the README don't really say much just make sure you have JRE 6 and run the script which I have done but get a message that I can't even began to cipher which is the following..
Code:
./pms.jar: line 1: PK: command not found
./pms.jar: line 2: h:: command not found
./pms.jar: line 25: h:META-INF/MANIFEST.MFManifest-Version: 1.0
Ant-Version: Apache Ant 1.7.0
[Cpde]....
View 9 Replies
View Related
Mar 4, 2010
My husband has opensuse 11.2 on his PC and is trying to get the Buffalo Linkstation to automatically boot up and access it.He can manually mount it but is frustrated to bits in trying to set it up automatically. He's thinking of nuking opensuse and going to Ubuntu as it worked before.
View 3 Replies
View Related
Apr 8, 2010
I am running
Code:
On my laptop (HPDV7), using DHCP for network access, KDE4.
I use Network Manager to manage wired and wireless connectivity.
I also have Samba server running for connectivity to Windows machines.
My router runs DD-WRT.
How do I tell this HPDV7 system to propagate a Host Name up to the router?
In the DD-WRT status screen, I see Host Name as "*" associated with the assigned IP address.
I cannot, for example, ping my HPDV7 machine from my windows machine, I assume because the router (also providing DNS for my network) does not provide the name to address translation.
I CAN ping the IP address directly, and Samba connectivity from the Windows machine to HPDV7 works.
The file
Code:
View 3 Replies
View Related
Jun 9, 2010
I am connected to work via a VPN. I am logging into a Solaris box at work from OpenSuse 11, using ssh -X. I would like to start a GUI on the solaris box. The problem is that I don't know what value to give the DISPLAY variable. Is it the local internal LAN ip address, for my machine? I did try that, and I tested it using, xterm on the solaris machine. It says it can't open the display. I have enabled remote connections on my machine using xhost +.I have to run a performance test on the Solaris box at 7am in the morning... so need to find out how to start the GUI
View 6 Replies
View Related
Aug 10, 2010
i got some bad virus on my windows and there is no way to remove it so i need to use linux some time till i find a way to remove the virus.I run a online test to see what linux distribution will be the best for my pc since i have very bad/old pc and i found this one.Everything was fine but when it come the part to get internet access it gone bad...I have adsl modem the model model is DSL-360R.This is how i create a internet access in windows.I open con.panel go to network conections and there is a local area conection icon.Right click/properties the select Internet protocol(TCP/IP) and click install i enter thoose numbers(given by my net provider) Ip address: 192.168.1.2 and etc...(If you need the other numbers i will tell you.).
Then i create a new conection.I use a manual login i have username [URL] and password like 2003.I need to get internet on my linux.I aredy called the support of my operator but thoose noobs said they dont support linux and the man was kindly and said somethink about drivers and said to try somethink with spconfig or somethink like that i dont remmber all i know it didnt worked.That is it i tell you all i know and i hope that u can help me and tell me how to create a new connection. P.s my first impression from openSUSE> The os looks great, i love the instaled theme.
View 7 Replies
View Related
Aug 19, 2010
I can't seem to get Remote Administration (vnc) working for the life of me. I tried the ip4/ip6 fix and every other work around I could find. I simply can't figure things out. I can't say I'm new to Linux but I can say that I am quite new to openSuse and the RPM world in general. My actual error isn't much of an error but that of the vnc window just being a black window that eventually times out.
As of now I access and configure the box vis ssh.I'm using:
openSuse 11.3
Gnome Desktop
Installed from gnome live CD
View 5 Replies
View Related
Dec 20, 2010
im having a problem setting ad hoc wireless network between two opensuse boxes, using network manager, every time im about to smash the box, maybe im doing something wrong in the steps or something idk
how to set up ad hoc connectionl
note: im a linux rookie
View 3 Replies
View Related
Dec 22, 2010
After had installed opensuse 11.3 I am about toset a usb stick and connecting to internet. I can connect with ethernet but as I want to have also wireless internet I bought a LEVELONE WUA-0605 wireless usb adapter witch I can't setup and connect...
The only data witch I was able to find are:
linux-0wi7:~ # hwinfo --wlan
21: USB 00.0: 0282 WLAN controller
[Created at usb.122]
Unique ID: 2UT6.NomXlQ88uo3
Parent ID: k4bc.9T1GDCLyFd9
SysFS ID: /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.0
SysFS BusID: 1-3:1.0 .....
View 9 Replies
View Related
Feb 18, 2010
how I can define a local static IP address (so that I can run a web server off of the same IP, rather than letting my router DHCP it)?I've tried doing the YaST->Network Devices->Network Settings->Traditional Method with ifup->Set NIC to desired IP->Set Default Gateway to router address method, and afterwards I can't even get into my router anymore (not even responding to ping).
View 8 Replies
View Related
Apr 3, 2010
I'm maintaining a very modest network at home, with OpenSUSE as OS on the server. I got the DHCP and routing working by following the instructions in the wiki. However, every time I run dhclient on the server/router, it appears my own DHCP server assigns an address to the internal network card despite the fact I specifically assigned it to be static using Yast. The situation resolves itself when I restart the network services with the command /etc/init.d/network restart. Otherwise no problem, but it also seems the internal network card gets a "new" IP from my server every time the external card requests one from the ISP. This is more of an issue.
View 5 Replies
View Related
Feb 13, 2011
having a very specific problem setting up the wireless card in my Dell Inspiron 1545. The card's description under lspci is this:
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
I have the required drivers from this website: Broadcom.com - 802.11 Linux STA driver As far as I can tell I have followed all the instructions given by the readme, I have all kernel packages that I had understood to be required but when I try to make the Makefile I am given this:
borgs0@linux-yjl1:~/hybrid_wl> make
KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd`
make[1]: Entering directory `/lib/modules/2.6.34-12-desktop/build'
make[1]: *** No targets specified and no makefile found. Stop.
make[1]: Leaving directory `/lib/modules/2.6.34-12-desktop/build'
make: *** [all] Error 2
View 5 Replies
View Related
