I have a P2000 array from HP. What I did try to do was to expand vdisk and corresponding volume. After expanding finished i saw it expanded on management tool for array but it did not expand on host. I tried to rescan devices using pvcsan, rescan-scsi-bus.sh and so on. I tried to restart the host and it did not help neither. It's two node cluster with clustered lvm volume group which is causing the problems.
View 5 RepliesI have expanded a HP array by 500GB but am struggling to get Centos (Xenserver installation) to see it.
From the array controller the size of the disk is 1.4TB
Logical Drive: 2
Size: 1.4 TB
Fault Tolerance: RAID 5
Heads: 255
[Code].....
how I get LVM to see the whole disk that is now available (without destoying daya).
Trying to get a handle on xen. I have installed Centos 5.3 and I have created one xen guest using default 192 address. I can access this guest no problem from the xen host/server but how do I setup a bridged (I assume) xen guest so it can be connected from any network within my domain, The xm host is network is 10.32.161.0
View 1 Replies View RelatedI am using comcast ISP with DHCP.
When I type in hostname -f it says unknown host
in /etc/sysconfig/network
hostname=servix.example.com
in /etc/hosts
127.0.0.1 servix.mydomain.com localhost localhost.localdomain
192.168.1.101 example.com www.example.com
in /etc/resolv.conf
search servix.mydomain.com
COMCAST SNS SERVERS
nameserver 192.168.1.1
In linksys router I have host as servix and domain as example.com. So why is it returning unknown host?
Many of mails sent from my mail server that are in Queue;The main reason is deffered by domains like yahoo,aol,etc.but there is one more error that i keep getting and that is Host Unknown,Below is an example from mail log,The catch is,test mail sent on the same email id sent from my personal mail from the same server i.e. url was deliveredHowever,another mail containing client information sent from customercare@mycompanysdomain ended up in queue.
There are more examples of the same,around 20 domain have the same problem.
Sep 7 14:33:46 server2 sendmail[24591]: n8793jiC024589: to=<abc@xyz.fi>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=163672, relay=xyz.fi., dsn=5.1.2, stat=Host unknown (Name server: xyz.fi.: host not found)
Sep 7 22:09:42 server2 sendmail[6407]: n87Gdffa006403: to=<abc@def-fgh.com>, delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=152474, relay=def-fgh.com., dsn=5.1.2, stat=Host unknown (Name server: def-fgh.com.: host not found)
how to turn my computer on and browse the web. I want to host my website form my computer, only problem i don't now how to do it. It will take some time for me to understand this Os. (For now) My question is Can i use xampp linux to host my website using the security of centos. i now how to use xampp but i don't now how to use centos.? try reading around but i connot event find the yum program use to install softwares.
View 4 Replies View Related I installed ntop on our server, after installing it, i ran ntop as a daemon. shortly after we lost the ability to ssh into the server.tried restarting ssh, but it didn't work, so had to restart the entire server.Where should we look to find why ssh suddenly stopped?
the error ssh gave when we try to connect was like: ssh: no route to host what log files should i look at and what should i look for to find the cause of the error?
I'm having some trouble mounting an NFS share on a VM host (both CentOS 5.5):
-------------------------
SAN/NAS BOX (NFS Server):
-------------------------
/ filesystem on VolGroup00/LogVol00 = 7.6GB A 20GB filesystem on vg_vm/lv_vm1 is mounted at /srv/vm1 A 100GB filesystem on vg_vm/lv_data1 is mounted at /srv/data1
Output of 'df -h' (extraneous stuff removed):
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/VolGroup00-LogVol00
7.6G 1.8G 5.5G 25% /
/dev/mapper/vg_vm-lv_vm1
20G 173M 19G 1% /srv/vm1
/dev/mapper/vg_vm-lv_data1
99G 188M 94G 1% /srv/data1
I'm setting up apache on centOS 5.5 and administering it from another host on my LAN(this web server has no Xorg). I can ping from the config host to the web server but not the other way. My network is quite a way from being set up so i'm just configuring the web server at the moment, the simplest way i can. It's just trying to get two LAN hosts both with 192.168.1.0/24 I.Ps to talk to each other using a router to connect them.
Here are the outputs of ifconfig and netstat -rn for the web server, the config host and the router:
The ifconfig -a and netstat -rn of the config host are:
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
[code]....
I am a novice with linux but I pick up stuff pretty quick so far I have been able to figure everything else out except this, I have read all the documentation on apache 2 and getting virtual hosts to work and it appears I have everything setup right but yet I still can't get it to work, I have googgled my brains out and I still can not figure out whats going on here is my setup.I have two websites that I am trying to get to load[URL]I have webmin installed and I'm using their utilities to setup virtualhost. heres how it looks in my http config:NameVirtualHost 24.189.245.44:80 ( I have tryed * in place of my external ip)
<VirtualHost *:80>
DocumentRoot /var/www/html/gamerbreed
ServerName gamerbreed.com
[code]....
I have setup CentOS 5.2 with Nagios to monitor my network and have that configuration almost done. I have also setup Sendmail to forward all mail (really only Nagios notifications) out to my Exchange server using define('SMART_HOST', 'exchange.domain') in the sendmail configuration file and it seems to be working correctly.is there a way to configure Sendmail to forward all mail out through my Exchange server as it is now but send mail out to the internet itself if the exchange server is unavailable, somewhat like a failover configuration.
View 1 Replies View RelatedI installed bind & did not install chroot. I set up a fictional domain kelly.local. I am able to resolve FQDN (example: angus.kelly.local) in both dig & nslookup & ping on linux boxes.
I want to be able to resolve bare host names (example: angus) using bind. I get mixed results.
(1) linux boxes resolve bare host names & FQDNs just fine using nslookup & ping, but not dig. dig gives error:
; <<>> DiG 9.3.6-P1-RedHat-9.3.6-4.P1.el5_5.3 <<>> angus
;; global options: printcmd
;; Got answer:
;; ->>HEADER<<- opcode: QUERY, status: NXDOMAIN, id: 15241
[Code]....
My problem is that I can't setup a diskless environment with CentOS 5.4 (server) and CentOS 3.9 (hosts). On the host, I've recompiled the CentOS 3.9 kernel, with these mods:
- added kernel level IP autoconfiguration;
- added NFS file system support;
- added Root file system on NFS;
- added e1000 driver (the host has a gigabit network card);
Then, I have followed the guide at this link: [URL]
But in my dhcpd.conf I'he put other parameters:
ddns-update-style interim;
allow bootp;
allow booting;
subnet 192.168.195.0 netmask 255.255.255.0 {
range192.168.195.70 192.168.195.90;
option routers192.168.195.254;
option subnet-mask255.255.255.0;
option domain-name"lnf.infn.it";
option domain-name-servers192.168.195.254;
option time-offset-18000; # Eastern Standard Time
default-lease-time21600;
max-lease-time43200;
filename"linux-install/pxelinux.0";
next-server192.168.195.254;
}
host dante79 {
option host-name"dante79";
hardware ethernet00:20:38:01:C3:7C;
fixed-address192.168.195.79;
}
i have linux server application based on centos 5 that run httpd daemon from /usr/local/pf/conf/httpd.conf which is generated from the /usr/local/pf/conf/templates/httpd.conf.apache22 file
the problem is every time i run my linux server application i am not able to access phpmyadmin unless i stop my linux server application which is stop it httpd daemon then start "service httpd start"
i have been told by forum moderator to create an alias for my phpmyadmin in Virtual Host but it stil dont work, i am not able access my phpmyadmin site
this is what i have done to solve this problem
- open /usr/local/pf/conf/templates/httpd.conf.apache22 file then look for <VirtualHost *:%%admin_port%%>
- add Alias /phpmyadmin "/usr/share/phpmyadmin" (Failed)
- add Alias /phpmyadmin /usr/share/phpmyadmin (Failed)
- add Alias /phpmyadmin "/usr/share/phpmyadmin/" (Failed)
[Code]....
NB : my phpmyadmin is install on /usr/share/phpmyadmin with /etc/httpd/conf.d/phpmyadmin.conf as phpmyadmin configuration file
why i still cant open my phpmyadmin site ? or why i cant run phpmyadmin together with my linux server application because it use the same daemon (httpd daemon)
I'm trying to setup sendmail to use my gamil account as a mail relay but with no success. I followed these guides: [URL]and many others.my machine is a centos 5.5 vm running under opensuse host. ( I hope that its not just a virtualbox problem..)
I ended up with this setup:
/etc/mail/auth/client-info:
AuthInfo:smtp.gmail.com �U:root� �I:xxxxxx� �P:xxxxxx� "M:PLAIN LOGIN"
AuthInfo:smtp.gmail.com:587 �U:root� �I:xxxxxx� �P:xxxxxx� "M:PLAIN LOGIN"
[Code].....
I have installed centOS Server edition on my laptop and installed apache and mysql on server, i wanted to understand how can i make my server on line and host my website on my own server. I am using MTNL Broad band, and i have one static ip, How to make web server in centOS 5.5.
View 7 Replies View RelatedI have a linux box that I'm using as a ADSL router (slack 12.1).Until recently I had two hard drives in it, one for linux, and one for storing movies, music, etc.So, I have just bought another 1,5 TB disk. My plan was to add it to the same mount location: /opt/abram to expand my storage disk, only to come to conclusion that this can't be done. OK, it actually makes sense, if I thought about it I would realise it before. Anyway, what else can I do? Is there a way to add new drive to existing one in a way that would result in one 2,5 TB drive?
I tried it with mdadm, but as it turns out, it's impossible to crate RAID 0 without loosing all the data on sda1 disc.Also, it would be very cool if I could find a solution that would enable me to one day add a new drive to further expend my storage.I'm aware that I could mount my new disk to, let's say /opt/abram/Divx, or /opt/abram/mp3, but that's not the solution I'm looking for.
I am trying to set up samba in my CentOS virtual machine that is running on a Windows 7 host. I have found a tutorial in the How-Tos on this site but I'm not sure if they are exact and I'm paranoid about messing something up. The link to the tutorial is below. Is there anything that I should do different or anything that I should be aware of? Also, once this is set up, how do I transfer files between the two machines?
[URL]
Tearing my hair out on this one a little bit, having problems sending message from web based PHP form to user inbox.I keep getting: Undelivered Mail Returned to Sender<me@mydomain.co.uk>: Host or domain name not found. Name service error for name=mydomain.co.uk type=A: Host not found.Running these commands:
$ hostname = mydomain.co.uk
$ hostname -f = mydomain.co.uk
$ postconf -n =
[code]....
I've setup vsftpd correctly and it's running fine with local users (in the same LAN). However, when remote users wanna login to the server, it takes more than 1 minute to get in. Users do can login from remote. It just took too long. (It prompted for the username and password very fast.) Since the server is behind a router, I did configure the port forwarding for TCP 20-21. The centos version is 5.3. The vsftpd is v2.0.5.
View 6 Replies View Relatedi am getting the following error when use make command for asterisk -addons-1.4.13
Bhaskar reddy
menuselect/menuselect --check-deps menuselect.makeopts
Generating embedded module rules ...
[code]....
I have installed CentOS 5.4 machine named test.example.com (192.168.1.1)File /etc/hosts contains:127.0.0.1 test.example.com test localhost.localdomain localhostI have read that the loopback addres should not be assigned to host name,only to localhost and the host name should be assigned to 192.168.1.1, like this:127.0.0.1 localhost.localdomain localhost192.168.1.1 test.example.com testIs there any reason why it should be one or another way?
View 6 Replies View RelatedBit of an odd one, this. I've migrated a website from my old server to a new machine. Both servers run Ubuntu + Apache2. Both only serve a single site, apart from the default site.I've flipped the domain name to the new IP address.The trouble is that after moving the virtual host config over into sites-available, with the necessary link in sites-enabled, Apache attempts to serve from the default web root (/var/www) rather than the actual site content (in /var/www/technology). So for example, an attempt to browse.
View 1 Replies View RelatedI've been scanning the apache2 docs for the past few days and have not come up with an answer my following issue:
In my httpd.conf file, at the very end, I have the line
Include conf/vhosts/vhost_*.conf
However, when I run apache checkconfig or try to start apache, it gives me the error:
httpd: Syntax error on line 993 of /etc/httpd/conf/httpd.conf: Could not open configuration file /etc/httpd/conf/vhosts/vhost_1.conf: Permission denied
It appears as if the Include line is correct - in terms of it grabbing the first virtual host conf file. However, I'm confused on the permissions. the /etc/httpd folder is owned by root:root, as are the subfolders. As a test, I chown'd the conf/vhost folder combination and all the vhost files to apache:apache to see if that made a difference, and it appeared to make no difference at all. The log files don't contain anything (assumed because apache isn't starting). If I place the contents of the vhosts in a singular vhosts.conf it works - with the permissions set to root:root. I'd like to avoid having to use one vhosts conf for the configuration I'm trying to achieve - as it would make my life a lot easier.
I set up a DNS server, and it works fine when being queried from other hosts.But if I query it from localhost (by using nslookup), it reports error:
======================================
** server can't find www.example.com: NXDOMAIN
======================================
[code]....
I want to create a virtual host and virtual ip in proftpd linux centos. can anyone please help me on this,I'm new in linux.
View 8 Replies View RelatedI have some Oracle (Unbreakable|Enterprise) Linux systems, mostly running v5.4. I'd like to migrate them to CentOS 5.4 (or 5.5... I'm not picky about that).Is it as simple as updating the repo files in /etc/yum.repos.d, and issuing 'yum upgrade', or is there further magic involved?
View 1 Replies View RelatedWanting to join my CentOS5.3 to a windows 2003 active directory. Configured kerberos and samba.
Code:
[libdefaults]
default_realm = domain
dns_lookup_realm = false
[code].....
I'm trying to rsync files and directories from a RedHat linux host(v 4.5 & 4.7) to a Windows server 2003R2 Standard Edition with cygwin running. I'm executing the rsync command from the cygwin shell. The transfer involves rsync'ing approximately 1 TB of data from the linux server to the windows server. After about 280+GB of data transfer, the transfer just dies.
There seems to be no particular file or directory that the transfer stops at. I'm able to rsync GB's of data from other linux hosts to this cygwin server with no problem. Files and directories rsync fine.The network infrastructure is essentially the same regardless of the server being rsync'ed in that it is GB Ethernet running through Cisco GB switches. There appear to be no glitches or hiccups across the network path.
I've asked the folks at rsync.samba.org if they know of any problems or issues. Their response has been neutral in that if the version of rsync that cygwin has ported is within standards then there is no rsync reason this problem should happen.I've asked the cygwin support site if they know of any issues and they have yet to reply. So, my question is whether the version of rsync that is ported to cygwin is standard. If so, is there any reason cygwin & rsync keep failing like this?
I've asked the local rsync on linux guru's and they can't see any reason this should fail from a linux perspective. Apparently I am our company cygwin knowledge base by default.
Just something that struck me while working on our virtual servers today.
I have bonded 3 NICs at the host in Ubuntu Server 8.04 LTS. They are using mode 0 for Round-robin. Point is to increase the speed/performance of all the servers, but mainly the fileserver. The fileserver is a virtual server running Ubuntu Server 8.04 LTS on VMware Server 2.0.
1) I noticed the NIC in the slave OS reported link speed as 1000 and Im unable to change it as the NIC (virtual one) doesnt support it. Does this not really matter, as the NIC doesnt exist, and it will run at higher speeds anyway? Or do I have to remove the bond on the host, bridge all 3 interfaces from the host to the slave OS, and then make a bond in the slave OS?
2) While at it, does mode 0 only increase performance on data being sent from the host or does it also increase the available incoming bandwidth?