CentOS 5 :: PHP Configure --enable-dom?
Feb 19, 2010
I am running CentOS 5.2 with the default install of php. Here is my configure info.
Quote:'./configure' '--build=i686-redhat-linux-gnu' '--host=i686-redhat-linux-gnu' '--target=i386-redhat-linux-gnu' '--program-prefix=' '--prefix=/usr' '--exec-prefix=/usr' '--bindir=/usr/bin' '--sbindir=/usr/sbin' '--sysconfdir=/etc' '--datadir=/usr/share' '--includedir=/usr/include' '--libdir=/usr/lib' '--libexecdir=/usr/libexec' '--localstatedir=/var' '--sharedstatedir=/usr/com' '--[code]..........
View 7 Replies
ADVERTISEMENT
Sep 23, 2010
I am trying to install the IDS component barnyard2 on RHEL 5. I am following the snort enterprise insall document by Patrick Harper. For installing barnyard, after the tar command it says to perform a ./configure --enable-mysql The --enable-mysql does not work: configure: WARNING: unrecognized options: --enable-mysql --with-mysql does work. Is there a difference? Next, using --with-mysql, I get a failure at the end:
ERROR! Libpcap library/headers (libpcap.a (or .so)/pcap.h) not found, go get it from Open Source and Linux Forums dot tcpdump dot org TCPDUMP/LIBPCAP public repository or use the --with-libpcap-* options, if you have it installed in unusual place. Also check if your libpcap depends on another shared library that may be installed in an unusual place I do a find / -name libpcap* and get:
/usr/share/doc/libpcap-0.9.4
/usr/lib/libpcap.so.0.9.4
/usr/lib/libpcap.so.0
/usr/lib/libpcap.so.0.9
/usr/lib64/libpcap.so.0.9.4
/usr/lib64/libpcap.so.0
/usr/lib64/libpcap.so.0.9
How do I tell the configure to use one of the above? I don't understand how to use the --with-libpcap-* option?
View 11 Replies
View Related
Feb 21, 2011
For X-Mas I got myself a nice little nettop running off an ION motherboard. how to enable HDMI audio output, but got it to work. I've realized that when I'm in XBMC (which is admittedly the only place I watch movies) certain sounds like gunshots will be extremely louder than something like dialog. My friend believes that I should mess around with the channels (to fake the center channel from the left and right) I don't want to threaten Linux, how lightweight I can make it which is critical to an HTPC, but considering XBMC just got a Netflix addon
View 1 Replies
View Related
Aug 9, 2011
I have tried to install and configure Hudson in centos distro version 5.Installed hudson with tomcat by deploying .war files.after configuration was completed, builded a project.It displayed build was completed successfully.but I was not able to download output of build.
So I rechecked configuration,found that i havent set artifact file pattern to archive. how to set artifact file pattern and how to get build output. how to manage hudson by using configure system and configure options.what is the correct way to configure public hudson?.
View 3 Replies
View Related
Feb 10, 2010
I recently installed Deluge 1.2.0 from the following PPA:[URL]I using this on two different Linux computers. One is running Linux Mint 8 and the other is running Ubuntu Netbook Remix 9.10. The first time on either computer when I enable WebUI in the Deluge GUI it works fine. However if I ever disable it in plugins section I am subsequently unable to re-enable it (doesn't appear in the side panel again). Rebooting or reinstalling Deluge seems to have no effect.Is this a bug or am I doing something wrong?
View 3 Replies
View Related
Aug 10, 2010
How do I know what sound system my Centos 5.5 install is using and how would I configure which soundcard output to use? I want to use the digital coax output from my M-Audio PCI soundcard, which appears to be detected and loaded. When I launch MPD, it autodetects an alsa sound system, but programs like alsamixer don't exist and I can't hear any sound out of the digital coax output. I haven't checked the 3.5mm stereo out yet.A little confused as to which documentation to be looking at at this point.
View 9 Replies
View Related
Dec 29, 2009
I am brand new to this forum! I have spent some time on other Linux forums but based on my usage of CentOS I figured that it would be best to come straight to the pros. I've been using CentOS for a while now, mostly as a web server. Actually I use it as the base and installed Parallels Plesk Control Panel.
Anyway I want to setup a VPN and so far I haven't found any real solid documentation on how to do that! Yes I could install DAG/RPM Forge but what I really want to know how to do it from scratch. What I mean by scratch is that I want to download the tar.gz package from openvpn.net and then build it as required. I don't know much about building or compiling a package so that is why I have come here for help! I am guessing that I need to compile openVPN with openSSL and probably a few other packages... I could use openSWAN but I don't want to.
View 6 Replies
View Related
Jun 12, 2010
I am bit lost with configuring my apache2 web server. From the book I am using it says for me to configure apache2 to support PHP I need to execute "./configure --prefix=/usr/local/apache2 --enable-so". From what I can determine Apache2 is located in "/etc/init.d/apache2" folder. I used a Ubuntu 9.04 distro (I386 Server Ed.) to install the server. I added "Kubuntu-desktop" for viewing. Then performed web upgrade to Karmic 9.10. All went well !! Question is; Where do I execute a command to enable PHP support? Once again, the command is to look something like "./configure --prefix=/usr/local/apache2 --enable-so"
View 2 Replies
View Related
Sep 20, 2010
I have a post at X86_64 but I still don't see any light there, hope some here could give me some info about HugeTLBFS on CentOS 5.x. This is the thread:
View 1 Replies
View Related
Jan 5, 2011
I transfer my dedicated to another i put same version on it php 5.2.9 and ldap module installed but couldnt activate it on new server is there something i missing ?
View 11 Replies
View Related
May 30, 2010
I want to enable quota on my centos 5.5, I've tried and it showed correctly quotacheck but when i rebooted the machine it showed me an error saying that fsck.ext3: no such file or direcotory while trying to open /dev/VolGroup00/LogVol00 below are my fdisk and fstab file. how can I enable quota based on below configuration. otherwise may be I have to reformat the machine..n it'll be really painfull for me.
[root@drikdhaka ~]# fdisk -l
Disk /dev/hda: 82.3 GB, 82348277760 bytes
255 heads, 63 sectors/track, 10011 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
View 1 Replies
View Related
Apr 10, 2009
I try to update my centos 5.2 to 5.3 but when run
yum update code...
View 9 Replies
View Related
Jun 4, 2009
A problem with installing CentOS 5.3 from DVD ...
I downloaded the CentOS-5.3-i386-bin-DVD.iso, after recording an image on DVD
Start the installation, selecting Installation Method, chose Local CDROM - Message on my screen: "CD Not Found"
P.S. md5sum matches with this website developer
What a problems?
View 2 Replies
View Related
Jun 25, 2009
We use Centos 5.3 which we deploy to dozens of boxes in different buildings throughout our shop. I set up KDE to be the default windows manager for these boxes, although the individual users can choose for themselves. We use LDAP authentication, and typically logging in through the LDAP into KDE goes without a hitch. However, a couple users are having problems logging in to their accounts through KDE, my boss and my boss's boss to be specific. We have NFS shares which serve up each users home directory regardless of where they connect in our system. When my boss, or his boss, try to log in, they put in their credentials, and LDAP accepts them, but KDE never starts. The splash screen which displays that it's "initializing system services" or "loading desktop" doesn't even come up, it just has a picture of the desktop with a cursor, and hangs there. I've tried deleting the .kde directories in their home folders, but that doesn't work. Those two are the only accounts out of our entire system that have problems logging in to KDE, and I have no idea why!
I've looked in the .xsession-errors file, here's a copy code...
I know it isn't the xset or "no profile" errors because all the users I've checked get those too, but they can log in just fine. Both xsession files on both users are almost identical to this one, it just seems that KDE will never start.
View 1 Replies
View Related
Jul 10, 2009
I'm trying to install centos on a softraid 10. Unfortunately this isn't supported standard. When i try to enable raid 10 in mdadm i get an error wich says modules can't be parsed.
how to enable raid10 during install?
View 5 Replies
View Related
Aug 28, 2009
I just loaded 5.3 from the CD's. How do I enable XFS file system support.
View 10 Replies
View Related
Jan 8, 2010
How can I install ssh?
I tried following:
yum install openssh
The installation works fine and on the last line appears: Complete!
But openssh is not working:
I tried
ssh root@172.21.35.110
-bash: ssh: command not found
Have you any ideas? The ping works to this maschine.
I checked the rpm (thanks to pSchaff)
rpm -qa *ssh*
openssh-4.3ps-36.e15_4.3
openssh-server-4.3p2-36.e15_4.3
Do I need additional openssh-client?
I tried: yum install openssh-client but without success --> it appers "nothing to do"
View 2 Replies
View Related
Oct 25, 2010
Update kernel to 2.6.26, i don't know how to enable kdump for this kernel version.
at http://debuginfo.centos.org/5/x86_64/ not find kernel-debuginfo-2.6.26,
how to enable it ?
View 3 Replies
View Related
May 14, 2011
One of my colleagues was working on my system (Centos 5.6). He deleted some files from the /tmp directory (he thought he was cleaning up files). Right after that, he rebooted the system. I now can no longer login.
Prior to this, here's what I see following a reboot code...
no matter what I use, I cannot login -- it takes me back to the (none) login: prompt
Any ideas? I know that deleting from the /tmp directory could lead to catastrophic results, but he thinks he only deleted a specific set of files.
View 1 Replies
View Related
Jun 2, 2011
how to enable php-mysqlnd extension in php-5.3.6 in centos 5.5. I tried no solutions and no proper google docs.
View 1 Replies
View Related
May 3, 2009
How to enable multiple language support in centos?
understand that we need to install scim (smart common input method)
but if I install and choose only one language, what should I do after installation
from http://www.centos.org/docs/4/4.5/rhel-ig-x8664-multi-en-4/s1-langsupport.html
I guess right now after i install scim, I'll still not able to view other language (Asian Language) web sites
View 1 Replies
View Related
May 5, 2009
have read [URL] lspci | grep Wireless 10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02
[Code]...
have read [URL] but still could not issue the problem how should I resolve my wireless isusues?
View 19 Replies
View Related
May 22, 2009
Does anyone know a way to activate a screensaver at the login screen? I've got about 5 machines here, and I'd really like the ability to just have the screensaver come on after 5 minutes of sitting there with nobody logged in...
Even a way to blank the screen would be nice. However, if we were to blank the screen, I need to ensure that it doesn't do a DPMS blanking, since we use calibrated monitors here, and turning them off sucks.
View 5 Replies
View Related
Mar 8, 2010
i'm running httpd 2.2.3-31 on a full update centos 5.4 , i need to enable mod_charset_lite on apache, how can do that?
View 3 Replies
View Related
Oct 27, 2010
I am using centos with two physical LAN cards. Some times one of our internet link goes down so the entire network stop. Now there are two different ISP internet lines coming into a single computer in their respactive lan cards for load balancing.
Kindly guide me that how can I enable Load Balancing in my Linux Box.
If one ISP goes down the load balancing server will use teh second one and vice virsa.
View 1 Replies
View Related
Sep 1, 2011
my local box is centos 5.5 running gnome.
I have a eucalyptus instance (vm) running an older version of centos (5.3?). As a vm it has no graphical display. I'd like to run a graphical app there so that it displays back on my local machine.
Used xhost locally and it shows the remote IP (eucalyptus instance) as enabled. On the remote side (eucalyptus instance) I set DISPLAY with:
export DISPLAY xx.xx.xx.xx:0.0
where xx.xx.xx.xx is my local ip address. Oh, I did install X in the vm instance (yum groupinstall "X Window System"). X is installed but not running there (does the point of origin of the x app need to have X running as well - and what does this mean in a vm which is a non-graphicla environment?).
Anyway, I try to run (from remote to local) xclock and get the typical
Error: Can't open display.
View 3 Replies
View Related
Feb 5, 2009
I trying to install a webcamera (Genius Messenger 310), but i have can not
View 3 Replies
View Related
Jun 3, 2010
I've installed a standalone system (no internet connection), and now I would like to add more software from the 7CD I used for the clean installation. I've enabled the 'media-repo' and disabled any other, but when I go to the main menu '->remove/install software' the System shows the message 'Can't find repomd.xml file...' and stops.
What can I do to enable this method?
View 1 Replies
View Related
Jun 7, 2010
I recently installed CentOS on a really old computer and while most things are running well, I am unable to connect to the internet. Using a Damn Small Linux live CD I am able to connect just fine and was able to see that that 'hp100' was being used as the netcard driver. When I tried to set up the network card using that adapter (HP10/100VG ....) it gives me the following error code...
View 1 Replies
View Related
Sep 27, 2010
I am unable to boot my server and it is erroring with the message "Kernel panic - not syncing: Attempted to kill init!". Here are the details:
I have a brand new Dell PowerEdge T110 server with Quad-Core Xeon CPU and 2GB 1333MHz RAM. I have installed a hard disk (SATA, 7.2rpm) on this machine that I removed from another Dell PowerEdge T100 server with Dual-Core Xeon CPU that was running software RAID 1.
Now when I boot the new T110 server, it displays the following error messages code...
I am running CentOs v5.5 x86-64. If I put the hard disk back into T100, it boots fine. I do not know why it is not working with T110 server.
View 6 Replies
View Related
