I'm running a server with CentOS 5 where the software that needs to run on the server uses ifconfig to verify the system IPv4.The problem is that /sbin isn't set for the user that is supposed to run the software (sadmin) which means the software can't execute ifconfig and thus terminates.now the workaround I've been using is simply to input.
View 10 RepliesI have installed CentOS 5.5 x86-64 on my HP 6710b laptop and currently am in the middle of adjusting it to my needs (software/hardware development). As stated in the subject I can't add /sbin to $PATH. I have tried editing .bash_profile in my home directory and adding /sbin to PATH=$PATH:$HOME/bin, but it does not help. It's not a big problem, al though it would be much easier to use some commands (ifconfig for example) globaly.
View 3 Replies View RelatedI just installed CentOS 5 last night. Former Debian user.I was having problems with commands like ifconfig and visudo. So naturally I ran locate and noticed that they where in /usr/sbin. Then echo $PATH and noticed /usr/sbin was not there.Should I add it to my $PATH?
View 3 Replies View RelatedHow do I set the PYTHONPATH for the root user only? Or at least add to the python path for the root user? I need to read from the /var/log/apache2/access.log in my python script, so I need to use sudo for my script to be able to read from it.I tried setting the PYTHONPATH in /root/.bashrc but that didn't work. I don't want to use a .pth file because I don't want the directory to be on the path for all users due to import collisions.
View 6 Replies View RelatedBeing new to Linux, i've just about got used to the Debian setup procedure now, but had a quick question on the default ownership of files and folders. On my default Debian installation, almost all the folders and files are owned by root:root. Is this the correct advised configuration or should the folders and files be owned by a user without root permissions - eg user:user?
View 12 Replies View RelatedAs I login as root, the bash is /sbin/sh. So I have problem to run script under /ect/rc3.d/myScript
So I want to change the bash from /sbin/sh to /bin/bash.
Because I keep a lot of data on a Netgear ReadyNAS which can be presented as a NFS server, I would like to have the default CentOS user have a uid and gid that match those for the user that owns the main NFS share. That way I can treat it as if it were a directory that I owned on the local machine. I'm probably going to install CentOS 5.3 over again to get a totally clean system. What is the neatest way to ensure that the default user has the desired uid and gid? Or is there a better way to work with the NAS? (Right now I'm running it with CIFS shares, but these are quirky and do not behave quite like a local file system, I'm hoping that NFS would be more consistent, but previously attempts to run NFS were hampered by different uid and gid values).
View 1 Replies View RelatedI did chmod -R g=rwx on /bin , /sbin
now I can not connect to the machine using root through telnet, ssh, scp, rsh or any means.
Hey I have made a user so that he is able to access my ftp files though filezilla.
However he does not have access to the root folder. How can I edit this?
Running a server using CentOS 5.5 (yum updated, x86_64), found that when using /usr/sbin/useradd to create system user, the quota for the user will default set to 5M soft and 10M hard (on /var/spool/mail partition). As remember the default setting for user quota should be both zero when create a new user.
man useradd and quota related command and no help, had any idea how to change/set the default quota when create user.
As root, firefox shows that no plugins are installed - does not see flash-plug. For the other user the flash-plugin is there however it only load for the first instance and then will only start again if I reload the page.
Yes I am new to Linux - I have just installed Centos 5.3 and via yum install adobe flash-plugin - lots of searching on the web to get this far.
I followed this tutorial for setting up my server. Whatever I type into mysql or mysqladmin all I get back is Quote:ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: NO)
View 1 Replies View RelatedI'm trying to get Xorg running on a Dell 2850.I can't get it to work.I installed xorg-x11-drivers via yum, and used both "Radeon / ati" drivers, including the default vesa.
Here are the main errors (error log file attached):
Could not init font path element unix/:7100, removing from list!
(**) RADEON(0): RADEONSaveScreen(2)
localuser:root being added to access control list
No profile for user 'root' found
[code]...
and at the end it says:
FreeFontPath: FPE "built-ins" refcount is 2, should be 1; fixing.
I am going to remove root access via SSH which seems fine but I don't know how to add a new user, do I have to create a group first or are there existing groups I can add a user to, and does it matter which group I add a user to if I want this user to have root access with sudo?
View 11 Replies View RelatedI forgot the root passwd for linux (via the "single" mode) and, according to all confirms, did so successfully! I then try to log on to Centos as root, and I can't....it says "incorrect passwd"! So then I log on as another, regular, but not root, user, with that passwd, and boot up into Centos. if I try to "su" to root, with the new root passwd, again it says its incorrect. there is no "system admin" passwd set. I checked!. I need root access within Centos!
View 8 Replies View RelatedCan anyone tell me how to make this script,( located in /etc/init.d/tomcat ) startup at boot time under the tomcat user and not the root user?
#!/bin/bash
# tomcatStartup Script for Tomcat
# chkconfig: 2345 20 80
# description: Tomcat Server basic start/shutdown script
# processname: tomcat
# pidfile: /var/run/tomcat.pid
[Code]...
I have a new CentOS server install. I am trying to connect from a windows xp box using putty ssh. I can get as far as putting in the password for root user and then it tells me access denied.
View 2 Replies View RelatedIs It possible to change a process running in root-user to non-root-user by setting suid / uid / euid / gid etc... I so please instruct how, when and wat to set in order to change a process running in root-user to non-root user
View 4 Replies View RelatedCan someone assist me with recovering/resetting the password for Root via Single User Mode in CentOS v5? I've modified the kernel line using Single, S, and 1 but it appears that these commands are being totally ignored as the server continues with the boot process and displays the GUI logon screen. The server in question is a VM box running on ESX v3.5 U4. The person that created this VM is no longer employed here and I've exhausted everything I know regarding Single User Mode.
View 12 Replies View Relatedwhen i want set quota for a user is use: "edquota -u root"
but if i want set quota for all user, and create a default for new user, what should i do ?
I have installed the Apache Directory Server (ApacheDS) Now I need a iniscript that startining the App as Root, so that it can use the Port 389. After them a unprivileged User (apachds) should run the Service. The same solution I am searching for Glassfish. What can I use for them? RHEL and compatibles doesn't have a start-stop-daemon like Debian.
View 3 Replies View RelatedFor my Project purpose , I need the terminal as root user by default. I dont want to enter the super user password all the time..
View 3 Replies View RelatedI windows xp. I install vmware on it and install centos 5. Now how to use internet in centos 5 using user name and password. Our internet provider give us user name and password.
View 1 Replies View RelatedI am using VSFTPD as my FTP daemon. I want it to be set up so that my user (cj) will have a default directory of / when I log on to the FTP server and I want the secondary account (guest) to have it's home directory as the default location without any access to the root of the drive.
I need my account to have the default as / because the FTP client that I use in Windows won't go up to the parent directory of the default. Therefore, I cannot access the rest of my drive.
When I set "local_root" to "/" , it brings both users to the / directory when they sign in, even though the guest account is set to open the home directory with the "chroot_list_enable". It seems like the local_root option overrides the chroot_list_enable option.
Is there any way to set the default directory for each local user separately?
Also, Let me know if this is impossible with this FTP daemon
i'm using Centos 5.3 (2.6.27.10-grsec-xxxx-grs-ipv4-64 x86_64 kernel) and i got a problem with installing apf/configuring iptables. It seems that my kernel doesn't support Loadeble Kernel Modules. I'm receiving following message when catting /proc/modules: Quote: cat: /proc/modules: No such file or directory /sbin/modprobe -l FATAL: Could not load /lib/modules/2.6.27.10-grsec-xxxx-grs-ipv4-64/modules.dep: No such file or directory
View 4 Replies View RelatedI need to create an SSH user that can only access the directory I would specify for them. For example, I've been able to execute the following:
useradd -d /home/me/directory_for_this_user someuser
So when someuser logs in they get into this directory. Problem is that once they log in they can simply execute:
cd /
and navigate through all other directories which is a security risk.
How I could limit someuser's access to only /home/me/directory_for_this_user and its subdirectories and nowhere else in the system?
We have installed apache 2.2.15 webserver on A rhel 5 Linux 64 box using the user wwwadm group www
We can start the webserver using root and it works fine but we dont have root access forever so we want the wwwadm user to have all the rights and we can start/stop/restart the Apache server using this wwwadm user.
accidently deleated ubuntu lucid default theme,and lost the default user logon,it's now flat and gray.how to get it back?i still have the background, not the user logon
View 8 Replies View RelatedOpen a new terminal either in tab or new windows,The default work directory is $HOMEDoes anyone know how to change it to `pwd`, so every time a new terminal starts form the same path as the mother terminal (the terminal user calls new from).
View 9 Replies View RelatedI want to change the default path for logs in Jboss running on Fedora box? How to do the same?
View 1 Replies View Related