I have CentOS 5.4, and am trying to install mailman.sudo yum install mailmanlook fine, tries to install Package 3:mailman-2.1.9-4.el5.i386, gets to "Installing: mailman [#### ] 1/1"and then freezes with #'s about 80% across. There it stays, until I kill -9 from a different shell.yum-complete-transaction just repeats the same experience.yum update works fine, everything else updates without trouble.
View 1 RepliesI have a fresh install of CentOS 5.5 on small thin client system with a 80G HDDs, 1 GB ram [URL], I have run into an issue where the system just locks up and freezes and I can no longer access it, cant ping it, cant use webmin and cant view its web pages. The system seemed to be running fine unitl I left it to do some updates via webmin as it informed me there were 118 updates. I really only use the system as a LAN captive network server, and it is currently in the testing phase for this setup. The install went on with no issues and it ran fine, but now every so often within 12 hours it just locks up and I have to reboot. kdump shows no logs so I am finding hard to work out what is going on. but have installed it on 5 of my servers 4x ibm x335 and this . I intend to use the mini server for a captive portal system displaying advertising and promotions to wireless clients.
View 5 Replies View RelatedI had a server running Centos 5.5, which i have Webmin installed.. The other day i saw that there were updates available so i installed them, and now i have Centos 5.6 installed. I just had to reboot my server to move it, and now it wont boot. It is freezing at "Starting xend:"
View 5 Replies View RelatedI've been having problems for a while with my pc at work and after a bout with a similar desktop I figured out that it somehow relates to the kernel updates from 5.3 to 5.4. I have two machines with identical motherboards (Asus M3a32-mvp), cpu ( athlon 64 X2 6400) and memory (8 gigs Corsair) with different video cards.
My desktop at work started with Centos 5.2 and was kept updated to 5.4 along the way. The other PC is my desktop at home and it started out at 5.3 and stayed there until recently mainly because my wife mostly uses it so I just never got around to doing updates.
Here is the problem, a while back the work PC started doing weird things, it would stutter, freeze up, sometime the mouse cursor would freeze into a cross hair and sometimes completely lock me out where even the keyboard wouldn't work so I had to kill power to reboot anf get control back. I eventually discovered that if I still had keyboard access I could jump to a console window, log in and killall nautilus or killall gnome-panel and I might get things back to normal for a while. I can even log in with another machine to use the killall commands if the keyboard locks up. I checked TOP during these episodes to see what was killing the system, I figured something was running a muck and gobbling up processing time or memory but nothing shows that appears to be off.
Like I said the home system was on 5.3 and not showing the stuttering problems so I even considered that the video card drivers might be causing something, that is until I tried to update the home system and got the same issues.
I had a hard drive failing at home so I figured I'd back up the data and reinstall the main system on a new one so I could start over with a clean system. This time I started from 5.4. Almost imediately I discovered the freezing problems after the complete install so after trying a few things I wiped and reloaded, couldn't mess around too long with it as the wife was really complaining about not having a PC, a 5.3 version. Bingo, now the system functions perfectly, no stuttering or freezing up. I then used yum updates to updates everything but the kernel. This also seemed to give me a system without freezes so I stopped there with the home machine.
Just to be clear the home pc used the standard yum repositories defaulted in the setup i didn't add any so it isn't a 3rd party repo causing the problems with the home machine. So it looks like the updates from 5.3 to 5.4 regarding the kernel seem to be causing me problems.
It's getting so bad at work I'm planning on wiping and reloading a 5.3 version and going from there but that's alot of work so I'd really like to just fix what is going on with the 5.4 version.
I'm having a bit of a problem with a CentOS install I'm working on.This computer is an Asus M2A-VM mobo with the latest bios and a fully patched CentOS 5.3 system.The system randomly freezes and I've been able to narrow it down to what i think is ACPI issues with the chipset since the system is rock stable if I use the ACPI=off option in grub. However, when I do, I get messages about OHCI and EGCI controllers not having the correct PCI IRQ or somesuch and my USB don't work. Since this system has a usb keyboard, mice and printer, that's a bit of an issue!The system boots fine but will freeze after a random amount of time, sometimes even during startup (after the X Window system has been opened).
I'm at the end of my rope here as I'm admittedly pretty new to Linux (about 2 months experience although I've succesfully set up 5 systems and a zimbra server in that time - slowly learning when I'm trying to do something) and I've been scouring the net to try and find a solution to no avail.I know this particular chipset seems to be very trouble prone if I look around but the only thing I could find about issues like mine was related to ACPI with the chipset but that supposedly solved in earlier kernel revisions (and I have the latest kernel).troubleshoot the defective part of ACPI on my chipset would be appreciated so I can turn off the offending ACPI "feature".
PS : I also get an error message when booting : ACPI expecting a [REFERENCE] package element, found type F7B953PC
The first server I installed installed fine. The second server, installed with the same config, went to "kernel panic not syncing no init found try passing init= option in kernel" error. I tried reinstalling but it keeps going to that error after install reboot. The storage is ISCSI connected via Intel Server Adapter, which allows it to boot from ISCSI. Not sure if that's the cause for the problem, but the first server is connected to the same ISCSI and installed just fine.
Is there a way that I can make sure ISCSI module installs during installation? Although I think it is installed since it's able to copy the files and setup /dev/sda. I just wana make sure that it installs during setup.
I have tried to install debian 5.0 and 4.0 without any luck. I have both tried virt-manager and virt-install with both debian-501-i386-netinst.iso, and full dvd. I't always gives me the same error:Starting install.Could not find an installable distribution at '/xen/debian-501-i386-netinst.iso'
[Code]...
i didnt find a solution to a display problem im having. my server mobo is an asus k8n-dre with built in video. after the install(using built in video) the screen dosnt display fully as in black sections on the left and top of the screen. from the searching i did i found something about an "xrandr" command that would let me change the video settings but it didnt do anything with the black areas when i tried it. i also have a nvidia geforce 9500gt video card so i changed the jumper to boot from it and tried again. the black sections are still there but the centos display covers much more of the screen now. theres still about a third of an inch gap on the left hand side and about 1/4 of an inch on the top. ive also tried updating the software to see if it may be a driver issue but no luck. anyone know how or if it can fit to full sceen? the screen displays up to 1440x900 if im not mistaken but with the built in video it gave me lots of display options including the 1440x900. after changing to the nvidia card it only shows 800x600 and 640x480.
View 5 Replies View RelatedI am trying to install CentOS 5.2, and the installation ran out of disk space after running for about 2 hours.I checked the FAQ, and it said 1.2 GB. The disk is 3 GB. The default install was selected, and I think that it checks for sufficient available disk space before installing. Still, it ran for quite a while before announcing that it was out of disk space.The Installation Guide is not very helpful, since there is a blank page where the disk space requirement is supposed to be. I just picked the default installation. A search of the forums on "not enough disk space" did not return much.
View 13 Replies View RelatedI have successfully installed CentOS 5.4, and after choosing it from the GRUB menu, I am getting the following error message:1706-Smart Array Controller Extended BIOS Data Area Memory Corrupted. Int 13h BIOS Cannot Continue - System Halted.I'm using two SAS disks that came along with the server, left the default RAID configuration (1+0) on a P410 controller
View 5 Replies View RelatedI've got a box (prev used for WinXP) with 2GB Ram and a new 500GB HD to throw in there.Noticed on the Wiki CreatingUpdateMedia and reading as much as I can ramping up for this.I'm curious how I should partition this disk, and what other decisions I'll need to make on install.I see quite a bit of interest also in virtualization, and if I find a need, this could be useful too.Kernel upgrades?how to do? Does the disk have to be wiped or just use an alternate boot device to replace K on HD? I have a tech background in programming and some solaris, but *nix has grown up in the last 5 years.Hopefully devices will function and networking connectivity can be acheived without too much troubleshooting.
I'm doing this in part to be more educated, especially in the new world of web-hosting where you have a virtualized box, root and shell access, and need to manage it yourself. Beyond that even, my goal is to be able to work on my web-host by setting up a remote linux desktop, and I'll be looking for ways to configure that. There are clients out there (VNC, etc), but I'm not sure on the host-server configuration, and also the port-forwarding setup on my local router.
[URL]VMware Workstation 7.0.1 Release Notes has a list of supported OS:[URL]According to that, RHEL 5.4 is listed as supported for both host andguest but CentOS 5.4 is only for guest. This is quite strange and, ifit is true, that could be a serious issue.I succeed to install vmware workstaion 7.1 on centos 5.5, but have run-time error:
[root@ ~]# /etc/init.d/vmware start
Starting VMware services:
VMware USB Arbitrator [ OK ]
[code]....
I'm new on Dell PowerEdge 2900. I dont know how to install centOS 5.2 on it. whice OS type that I should select. at first I select RH enterprise 5 and it format HDD. already and I put centOS 5.2 in, but it was deny and eject that cd. when I power off it shown that
"root(hd0,1)filesystem type is ext2f2,partition type0x83
kernel/linux/vmlinz%(ksLocations)
Error is : file not found
press any key to continue"
I am trying to do a basic install of CentOS 5.4 on my embedded computer. It is a Linutop 2 system with a AMD Geode 800MHz CPU and 512Mb Ram. Have installed an IBM 40Gb 2.5" HD for OS storage. I am doing the install procedure in text mode. Everything goes as planned until I get to the package selection.
1. Booting from (i386) DVD with "linux text" parameter.
2. Skipping media check.
3. Selecting "English" install language.
4. Selecting "DK-latin1" as keyboard layout.
5. Selecting "Remove all partitions and create default layout" and selecting "no" to modifying partition layout.
6. Selecting "yes" to configure "eth0" and mark to enable "IPv4" on boot.
7. Selecting DHCP for IP configuration and Manual host name.
8. Setting time zone to "Europe/Copenhagen".
9. Setting root password to a 16 digit alphanumeric pass-phrase.
10. De-selecting "Desktop - Gnome" (no other entries selected).
When the system is checking for dependencies, an exception
Traceback (most recent call first):
File "/usr/lib/python2.4/site-packages/yum/packageSack.py", line 426, in returnNewestByName
raise PackageSackError, 'No Package Matching %s' % ui_pats
File "/tmp/treedir.22057/instimage/usr/lib/anaconda/yuminstall.py", line 1072, in getBestKernelByArch
pkgs = ayum.pkgSack.returnNewestByName(pkgname)
[Code]...
I've been trying for the past week to install an icecast server on my centos 5 VPS hosted through phurix.
I've tried compiling it, installing it from RPM. but im getting nowhere. Has anybody had any luck installing it, who wouldn't mind explaining how they went about it?
I've searched google for hours on end and all I can come up with is generic cent os 4 guides that just wont work. Im not the best when in comes to linux. I do a great job of copying and pasting to a shell prompt and can use ftp etc.
if this is any use.. heres the last output from my last attempt and compiling it...
[root@vps613 icecast-2.3.2]# ./configure --prefix=/usr/local/icecast
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for a thread-safe mkdir -p... /bin/mkdir -p
checking for gawk... gawk
checking whether make sets $(MAKE)... no
[Code]...
How do I know what sound system my Centos 5.5 install is using and how would I configure which soundcard output to use? I want to use the digital coax output from my M-Audio PCI soundcard, which appears to be detected and loaded. When I launch MPD, it autodetects an alsa sound system, but programs like alsamixer don't exist and I can't hear any sound out of the digital coax output. I haven't checked the 3.5mm stereo out yet.A little confused as to which documentation to be looking at at this point.
View 9 Replies View RelatedI am trying to run though the qmailrocks setup on a centos 5.5 and I am running into an issue when trying to telnet to port 25:
telnet localhost 25
Trying 127.0.0.1...
Connected to localhost.localdomain (127.0.0.1).
Escape character is '^]'.
Connection closed by foreign host.
Everything else seems to be working (telnet to 110), and I turned off the firewall entirely, but I still cannot telnet to port 25. I also get a blank error within squirrelmail when attempting to send mail out (ERROR:Message not sent. Server replied: ). I apologize for not going directly to the qmailrocks forum, but they are currently closed down (due to lack of funds). I also am a newbie, so I apologize for the lack of needed information. If anyone has any ideas, please let me know what information you would need.
I have an i5 Thinkpad running Windows 7 64-bit. VT is enabled in the BIOS. I have installed vmware server v 2.0.2 but am unable to install Centos 5.5 x86_64 as a guest OS. The steps that I followed are as follows:1. Created a new VM, specifying RHEL 5 64-bit as the intended guest OS (per vmware documentation - Centos is not available as a selection2. Downloaded all 8 iso files for Centos v5.5 64-bit3. Modified the CD/DVD drive to 'connect at power' and use an iso with the path pointing to the x86_64 iso 1 of 8When I power up the VM, the console window displays 'ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin' and nothing else. The installation splash screen never appears. As a test, I downloaded the first of 7 iso files for the 32-bit version of Centos 5.5 and pointed the CD/DVD drive to that iso. In that case, the installation starts as expected. I would really like to get the 64-bit version installed and running.
View 3 Replies View RelatedWhat i want to be able to do is create a custom kickstart for my centOS 5 server. I want to create a bootable cd that I can pop in my server and basically walk away for 45 minutes and I come back and its fully installed. All the directions I have read so far tell me that I have to create a seperate ks.cfg and then I need my original centos cd to get it booted. Then the cd will ask for where the ks.cfg file is and I have to type the location. I just want to pop the CD in and type in linux_clean or something and have it perform a custom install based on the information and specification in my ks.cfg. How can I go about doing this?
View 1 Replies View RelatedI am having a problem during a fresh install of CentOS 5.3 on an IBM Intellistation Z Pro 6221. I have tested the installation media (CDs). The install runs normally until I am asked to specify the appropriate keyboard.I take the default (English) and hit next. The keyboard and mouse keys become unresponsive though the mouse pointer moves. I can go no further than this. This behavior is the same whether I install in text mode or graphic mode. I have tried the noprobe installation option without success. The box I am doing the install on dual boots fine between Windows XP and CentOS 4.7 currently.Does anyone have an idea of what the problem may be?
View 2 Replies View RelatedI am eager to install GSN3 on CentOS 5 and work on GNS3. But i am unable to find a suitable easy guide to install the same. install GSN3 on CentOS.5 with rpm links if you suggest to download.
View 1 Replies View Relatedsomebody please tell me whether it would be all right to install xp inside CentOS using VMware or it's better to do vice versa if it is ok to install xp inside centos then at the beginning when i install centos should i allocate all hard disk to this OS and later give some to xp , or initially i should keep some space for xp and install centos in the rest ?
View 1 Replies View Relatedi wanna ask if it's possible to install centos on hard2 while am running centos on hard1 then after installation is complete boot from the second hard drive. i dont have physical access to the server, all i can is connect to it through SSH. so is it possible to install centos on the second hard drive from CLI! then boot from it?
View 1 Replies View Relatedim the newbie in this area.can anyone tell me how to install centos 5.4 in this hp proliant dl160 server.what I need to do to handle this RAID thing? because it show me not detected any logical hard drive in RAID configuration utility.
View 5 Replies View RelatedI have run into a bit of a problem. Trying to get a new install of Centos onto a pair of 750GB drives.
These were once part of a software raid setup. The installer reconises them as a ddf1 raid set. so it does not list the drives as 2 individual drives. I can get around this with the nodmraid
It is any possibility to install centos 5.5 on ext4 by anaconda ? Is ext4 filesystem is secure for files server (samba) ?? In anaconda installer there is only ext2, ext3 choice.
View 16 Replies View RelatedI have been trying to install clisp on one of our systems and get the error: Missing Dependency: libsigsegv.so.0()(64bit) for package: clisphowever, I have checked and the library libsigsegv-2.7-1.el5.rf.x86_64 and its associated header file package are, in fact,installed.
View 3 Replies View Relatedi have a IBM IBM BladeCenter 8677-3RU it currently doesnt have any ISO installed on the chassis since i dont know what to installed into it. The blade has 14 2 X 2.7GHZ PROCESSORS 2-socket single-core 64-bit PowerPC 970MP
4GB RAM
1 X 73.4GB SAS HARD DRIVES 1OK
based on this i can only install a ibm power [UTL]
I got a Centos 5.0 and just purchase a HP Laserjet P1102. I check Hp website and got to know that they supported linux except Centos. Anyone out there, Is there anyway to install this printer?
View 2 Replies View RelatedHow to install absolutely minimal Gnome without gnome-games, any cdrecord, dvd rw-tools, dialup modem tools, gnome-screensaver, festival etc. on Centos 5.5? If I try to remove these software separately then Gnome is gone.
View 2 Replies View Related