CentOS 5 :: LDAP - Directory Server Group Rights?
Mar 24, 2010
I've installed Directory Server (LDAP). The setup has been done according to the tutorials online. Able to access the interface as well. So far so good. The issue I have is with permissions. I can assign file permissions to a user created in the Directory Server ( user not created on the local server). But the same can't be done for a group - alteast the way I currently see it. How could i assign file system rights to a group created in the directory server.
View 5 Replies
ADVERTISEMENT
Apr 26, 2010
I've several servers (windows+linux) that authenticate to an LDAP server. There is one machine that I would like to allow only certain groups from LDAP server to have access and I am not sure where to start.
If that cannot be done, is it possible to disable LDAP root user to access these machines?
View 4 Replies
View Related
May 25, 2011
I am using RackMonkey to map out my lab. Unfortunately, due to RM limitations, every user who accesses the site has write access UNLESS they are logged in as a user named "guest". I currently have Apache allowing only the users (sysadmins) in an LDAP group access to RM, but I would like to allow read-only access for other users as well.I found mod_authn_anon, but I am having trouble combining the two authentication methods. I am using Apache 2.2.18 (compiled myself) on SLES 11.1.
This is the common part:
Code:
AuthType Basic
AuthBasicProvider ldap anon
Order allow,deny
Allow from all
This part by itself works for the LDAP authentication:
Code:
AuthName "System Admins"
AuthLDAPURL "ldaps://example.com/ou=ldap,o=example.com?mail" SSL
Require ldap-group cn=SysAdmins,ou=memberlist,ou=groups,o=example.com
This part works by itself for guest access:
Code:
Anonymous guest
Anonymous_VerifyEmail Off
Anonymous_MustGiveEmail Off
Anonymous_LogEmail on
Require valid-user
But if I have both of the previous blocks enabled at once, then guest access does not work. If I throw in a "Satisfy any", then I am not prompted for a username at all. How can I allow access to this LDAP group and to a user named "guest", but not allow all valid LDAP users to log in?
View 1 Replies
View Related
Mar 16, 2009
I did useradd -g users ldaptest and tried logging in remotely but the client always says no such user. what do I have to do to update the users that LDAP sees?
View 2 Replies
View Related
Aug 12, 2010
I have configured Ldap Server in CentOS 5.4 & it's working fine, the problem is when I create a ldapuser from server the user can login in client machine but the user has no rights to change the password. How to rectify this by using commands.
View 2 Replies
View Related
Apr 12, 2011
I have openldap server and i am authenticating with Redhat Directory Services(RHDS).I have confgured the RHDS for the user login giving /bin/bash as the login shell and joined the client machine using system-config-authentication.The user is able to login in connand line but below it gives the error :
"cannot find name for group id <id number>"
View 1 Replies
View Related
Apr 13, 2011
I'm trying to create a group called Domain Users, that will include several other groups that are populated with users inside of the LDAP database. In the LDAPdatabase, for a group entry, there are memberUid entries that can be filled. When I try to use another "Group" name, it just lists that name and not the people in that group. So if group "A" has Jim, John, Sue, and I include group "A" in the memberUid of the Domain Users group, I want that to reference the people in that group, not the group name. Testing access right, having the group name listed in "Domain Users" group, does not grant user access under the group rights on a directory. Should be simple, but I don't know the syntax to use for this reference.
View 2 Replies
View Related
Mar 31, 2010
When I run an exe-File, I become the message: -bash: ./a.out: Keine Berechtigung (No rights)
I have all Rights on the Folder and on the file. I suppose that the problem is that my group "Benutzer" has no rights to execute files. Where can I change the rights of my group?
View 8 Replies
View Related
Jun 8, 2010
I have this group "cn=admins,ou=groups,dc=home,dc=com" And I've configured slapd in the new way so I'm not using slapd.conf (I think). First I thought about just modifying the files at /etc/ldap/cn=config/....... but that didn't work. How do I make that group into an admin-group with all the rights ?
View 3 Replies
View Related
Mar 30, 2010
I have joined the domain (server 2003) and can log in consistently now. Now I would like to give all the windows users in on specific group (domain power users) SUDO rights on the machines in question. I have found one way to add users on a pr. user basis, but adding 30 users will take some time.
View 4 Replies
View Related
Nov 12, 2010
I have Centos ( and Postfix+ldap+dovecot ) TLS works with Postfix and LDAP. When I open evolution mail client I can browse ldap tree and search for users, send-receive mails ...all fine
View 3 Replies
View Related
Jul 8, 2010
On our fileserver, we primary use samba to share files to our users, but a few users have to use ssh/sftp to access the file server. In samba we have the shares setup so that permissions are forced to be the correct group owner and group read/write. The problem is those few who access via ssh/sftp. There files do not have the correct permissions. These people are not the most computer savvy, I'm dealing with biologist here. Is there some way to fix this or will I just have to setup a cron job to go through and set permissions periodically?
View 1 Replies
View Related
Feb 5, 2010
I've been busy with configuring Samba with the 389-Directory Server (former Fedora Directory Server) for the past weeks and I almost have everything working. The last thing (I hope) that I haven working are the smbldap-tools which I'd like to use for adding computers and users to the domain. The part where I'm stuck is with the security certificates. I don know how to get the client certificates out of my installation.
My smbldap.conf file contains this:
Code:
# $Source: $
# $Id: smbldap.conf,v 1.18 2005/05/27 14:28:47 jtournier Exp $
#
# smbldap-tools.conf : Q & D configuration file for smbldap-tools
# Purpose :
# . be the configuration file for all smbldap-tools scripts .....
I used the setupssl2.sh script to setup ssl for my 389-ds, which seemed to have worked fine. I however simply have no clou how to get client certificates out of this.
View 1 Replies
View Related
Nov 19, 2010
(This was posted at the end of another thread, where it probably didn't belong, so reposting here)I have Active Directory set up on one machine (and I can't really adjust the settings very much) and Ubuntu Server 10.04, which I would like to use as a client.I followed the directions at https://help.ubuntu.com/community/LD...Authentication, but when I get to
Code:
getent passwd
I don't see anything from the LDAP, and ssh'ing into the box from an LDAP/AD username certainly doesn't work.
In addition, I've attempted to use Webmin's LDAP Configuration module to configure it. I can connect to the server and can browse it with the LDAP browser with my settings, but the Webmin package doesn't recognize the users (which are organized in one of four Organizational Units (OUs) within the OU that I have as my Search Base) as users,
View 1 Replies
View Related
Feb 26, 2011
We have a small group of linux servers, currently with local logins. I want to eliminate the local logins and authenticate against the corporate AD. I've been looking at PAM - but winbind requires each machine to be added to the AD. This becomes a pain if we create new virtual or physical servers. Is it possible to have one server authenticate directly with AD, and the other servers authenticate against this server, which defers to the one server that is registered in AD?
View 3 Replies
View Related
May 9, 2011
My slapd.conf file
# This file should NOT be world readable.
#
include /etc/openldap/schema/core.schema
include /etc/openldap/schema/cosine.schema
include /etc/openldap/schema/inetorgperson.schema
include /etc/openldap/schema/nis.schema
# Allow LDAPv2 client connections. This is NOT the default.
allow bind_v2
# Do not enable referrals until AFTER you have a working directory
code....
View 19 Replies
View Related
Mar 17, 2009
If I ssh from my laptop (running F10) to the server (centos 5.2) it asks for the password, but everytime I enter the correct password it says incorrect password. when I do the same from the server to my laptop I can get in just fine. I think my passwords are stored as ssha in the LDAP (I tried clear passwords and that dosen't work either).
View 1 Replies
View Related
Sep 28, 2010
Just installed openldap server on a VM CentOS called 'ldapsrv', it works fine, ldapsearch returns all ldap information.
Installed openldap client on another VM CentOS called 'ldapclient1', configured it with most basic configuration, no ssl/tls etc. but ldapsearch returns error:
ldapsrv is pingable:
Some outputs:
PHP Code:
PHP Code:
View 20 Replies
View Related
May 31, 2010
we have a weird problem with our opensuse 11.2 server installation.
We want to set up a LDAP Server using the Yast-LDAP Server configuriation tool.
This indeed already worked weeks ago until....this week.
Maybe some updates??!
I do not know what happend exactly. The server just does not want to start again and throws following error:
Starting ldap-serverstartproc: exit status of parent of /usr/lib/openldap/slapd: 1 failed
This happend after a little check of the configuration, but without a change, with Yast. Google delivered only "reinstall your box"-answers.
So.. i did that. And now the "mystical" part: The SAME ERROR occurs with a fresh vanilla system with a brand new and simple configuration (certificats, database, pw...the first Yast config dialog...). I did not change the way i set it up.
I remember, when i did this the first time with 11.2 on that machine, when no problems occured...everything was running out of the box (except the "use commen server certificate" option...).
View 4 Replies
View Related
Jun 11, 2011
I configured openLdap in RHEL5 on virtual achines,everything is working fine, I created a user called ldapuser,in LDAP server and i created a home directory for ldapuser in my LDAP client, now i can able to login to the both Server and client with ldapuser account....
Now here what am expecting is i want to export my server's home directory to the client, i dont want to create home directories manually in the client machine, i googled about that, and it can be done through autofs.....
what need to be done on the client and server side.
View 6 Replies
View Related
Sep 8, 2009
I installed CentOS 5.2 and then run yum update. I configured this server as LDAP/Samba primary domain controller. LDAP seems to be OK and for testing I am able to create users with:smbldap-tools useradd -am usernameI can ssh into the server as root and also as a Linux user which was locally created in the server. But ssh into the server as LDAP user fails (from a Fedora 11 machine) with "Permission denied, please try again", prompting again for password.Some data:
# rpm -qa | grep ldap
python-ldap-2.2.0-2.1
php-ldap-5.1.6-23.2.el5_3
[code]....
View 1 Replies
View Related
Feb 27, 2010
I've been trying to set up a Linux-only network and currently have a working DHCP, DNS, LDAP and NFS server, with a client that can authenticate with the LDAP server and a central /home folder.However, if I wanted to share folders on the NFS server, how would I make the share available to, for example, a particular group of users in the directory?I've never used NIS(+) on a network, but believe you can add a 'group' of users in the /etc/exports file--simples!Does anyone know of the best way to do it (even better anyone who is doing this in a production environment)?
View 5 Replies
View Related
Dec 28, 2010
operating system: CentOS 5.5 git version:1.7.3.4 ldap server:OpenLdap Http server:Apache 2.2 the software above have been installed. How to config /etc/httpd/conf.d/gitweb.conf file to let git authed by ldap?
View 2 Replies
View Related
Apr 22, 2009
I would like to setup LDAP (openldap) with Samba. I would like to know what should I setup first? Should I setup LDAP before Samba or Samba before LDAP?
View 1 Replies
View Related
Jun 10, 2009
using centos 5.2
unbale to start ldap server.
see below info
[root@system ~]# yum install openldap
Loading "fastestmirror" plugin
Loading mirror speeds from cached hostfile
* base:
[Code]....
View 5 Replies
View Related
Jul 26, 2009
I am having problems creating ssl certificates for use with openLDAP. Does anyone know a good centos tutorial as I am having problems finding ones by searching through google and the forums.
To clarify further I have a small network im trying to setup to use ldap for auth due to the size I figured using kerberos for auth would be a bit overkill.....
I have the server up and running fine however at the moment all auth is done by using clear text (which is fine as the network has no connection to the internet at current) however in the future it will so I am trying to use ssl however I am having confusing as which certificates I point to where in the slapd.conf file
View 2 Replies
View Related
Sep 1, 2009
is there any GUI Ldap browser tool for centos? There is one very good tool for windows called softera ldap administrator.
View 2 Replies
View Related
Nov 21, 2010
We use Cent OS 5.4 as a application server. We would like users to login the server via LDAP authentiction. We want ot use Lotus domino server as a LDAP server. What we should do? how can we configure ldap.conf file? Does anyone cofigured this method before ? when we configured OpenLdap on another CentoOs Server, we can successfully login to Application server. We would like to learn correct configuration on ldap.conf for authenticate via Lotus Domino Ldap server ASAP.
View 1 Replies
View Related
Jun 17, 2011
I've been testing a PDC with samba and LDAP these days with the following unsolved issue. 1. I can add the client PC (Windows XP SP3) with the Domain Admin user (Manager) from the client PC, but when i try to add a user I get this message "The trust relationship between this workstation and primary domain failed", so as it can be added later I ignored this message and choose 'close' and reboot the PC. 2. Since the login screen is showed, the message 'Duplicate name exists on the network' appears. So I try to log on with a valid domain username and password after pressing ctrl+alt+del and get the error message: "System cannot log you on because domain rmprb is not available"
[Code]...
View 1 Replies
View Related
Aug 24, 2010
I configure named and stumble upon the following problem: named is serious about user rights, every config file named uses should be named:named. I set rights to named:named as follows, but they get changed to root:named when I restart named as root. The same thing happens with SELinux context. This results in access denied type errors.
View 1 Replies
View Related
